81 |
Simulation of the anisotropic material properties in polymers obtained in thermal forming processBazzi, Ali, Angelou, Andreas January 2018 (has links)
In an attempt to improve the quality in finite element analysis of thermoformed components, a method for predicting the thickness distribution is presented. The strain induced anisotropic material behaviour in the amorphous polymers of concern is also taken into account in the method. The method comprises of obtaining raw material data from experiments, followed by a simulation of the vacuum thermoforming process where hyperelastic material behaviour is assumed. The theory of hyperelasticity that was applied was based on the Ogden model and implemented in the FE-software LS-DYNA. Material behaviour from thermoformed prototypes is examined by experiments and implemented together with the mapped results from the thermoforming simulation in a succeeding FE-model. For the latter, the three-parameter Barlat model was suggested, giving the possibility to account for anisotropic material behaviour based on an initial plastic strain.
|
82 |
Large Strain Plastic Deformation of Traditionally Processed and Additively Manufactured Aerospace MetalsHoover, Luke Daniel 09 August 2021 (has links)
No description available.
|
83 |
Vývoj a aplikace výpočtového modelu balisticky odolného vrstveného laminátu / Development and application of computational model of ballistic resistant composite laminateUrbášek, Jan January 2020 (has links)
This master thesis is aimed at computational modeling of ballistic resistant layered laminate. The introductory sections of the thesis are aimed at understanding the individual topics that are closely related to the interaction of the projectile and target and computational modeling of this process. The main goal of this thesis was to create a computational model that is able to reflect the behavior of aramid fabric during the interaction with the projectile. During the development of the computational model were used more methods of modeling and also more material models were used. For the purposes of the development of the computational model were used the available data of the companies SVS FEM s.r.o. and VVÚ s.p. The outcome of the diploma thesis is a computational model of aramid fabric which is designed for ballistic protection simulations. This model is validated on the basis of available experiments. The validated computational model is then applied to the simulation of ballistic protection.
|
84 |
Investigation of Mechanical Properties of Thermoplastics with Implementations of LS-DYNA Material Models.Appelsved, Peter January 2012 (has links)
The increased use of thermoplastics in load carrying components, especially in the automotive industry, drives the needs for a better understanding of its complex mechanical properties. In this thesis work for a master degree in solid mechanics, the mechanical properties of a PA 6/66 resin with and without reinforcement of glass fibers experimentally been investigated. Topics of interest have been the dependency of fiber orientation, residual strains at unloading and compression relative tension properties. The experimental investigation was followed by simulations implementing existing and available constitutive models in the commercial finite element code LS-DYNA. The experimental findings showed that the orientation of the fibers significantly affects the mechanical properties. The ultimate tensile strength differed approximately 50% between along and cross flow direction and the cross-flow properties are closer to the ones of the unfilled resin, i.e. the matrix material. An elastic-plastic model with Hill’s yield criterion was used to capture the anisotropy in a simulation of the tensile test. Residual strains were measured during strain recovery from different load levels and the experimental findings were implemented in an elastic-plastic damage model to predict the permanent strains after unloading. Compression tests showed that a stiffer response is obtained for strains above 3% in comparison to tension. The increased stiffness in compression is although too small to significantly influence a simulation of a 3 point bend test using a material model dependent of the hydrostatic stress.
|
85 |
Numerical Methods for Predicting the Dynamic Crushing Response and Energy Absorption of Composite Aluminum Honeycomb Sandwich StructuresVolk, Cody R 01 June 2020 (has links) (PDF)
Edgewise crushing responses of composite aluminum honeycomb sandwich structures were predicted using finite element analysis (FEA) software LS-DYNA by modeling the honeycomb as a material with anisotropic properties. The goal of the project was to develop a process for modeling the sandwich structure to rapidly iterate possible solutions for a safer workstation train table. Current workstation tables are too rigid and may cause injury or death in a head-on collision. Experimental compression tests were used to calibrate the aluminum honeycomb core with material type 26 (MAT 26, honeycomb). A published composite tensile test was used to validate the use of material type 22 (MAT 22, composite damage) for laminates. Finally, a model was made to recreate the results of a published compression test of an aluminum honeycomb sandwich structure with aluminum sheet metal face sheets to confirm contact types.
With each component of the model verified separately, three plain weave composite aluminum honeycomb sandwich structures were modeled, one with [0/90] composite sheets completely bonded to the core, one with [0/90] composite sheets partially bonded to the core, and one with [±45] composite sheets partially bonded to the core. The failure modes for each sandwich structure were previously shown through research and the elastic region of the response was checked for accuracy using a simple beam theory. The analysis suggests that incorporating unbonded zones into the sandwich structure will change the failure mode from general buckling to face wrinkling, which effectively lowers the failure strength while not sacrificing energy absorption throughout loading. The analysis also indicates that using an angled ply orientation will lower the initial stiffness and the failure load. Future work is recommended such as performing compression tests with composite aluminum honeycomb sandwich structures and integrating delamination failure modes into the model using cohesive elements.
|
86 |
Virtual testing of self-piercing rivet connectionsAndersson, Daniel, Saliba, Fredrik January 2020 (has links)
The automotive industry is currently trying to replace the conventional steels to lightweight materials such as aluminum or carbon fiber to meet all stricter emission targets. When using such materials, traditional joining methods, such as spot welds, could be difficult to use. Therefore, more focus has been put on self-piercing rivets (SPR).In whole car models used in crash simulations, substitution models are used to model SPR joints. It is important to calibrate these models for different load cases. Volvo Cars Corporation (VCC) are currently calibrating using time-consuming physical tests where the SPR joint is subjected to loads in different directions. To save time, a way of virtually evaluating the SPR joint strength is therefore sought after. To do this, a method was developed using non-linear FEM in LS-DYNA. The method was then used to perform sensitivity studies concerning friction, sheet thickness and rivet geometry.The method developed can be divided into three parts. The process simulation, where the rivet insertion was simulated. A springback analysis, where the material is allowed to springback, closer resembling the real behaviour. Finally, the three destructive tests, lap-shear, cross-tension and KS2, were built using the geometry and initial values from the springback.For the process simulation, an explicit solution was used. To handle the large deformations present during the event, r-adaptivity was used together with a kill-element-method to describe failure, based on CrachFEM or Gissmo. The following springback analysis was then performed using one implicit step.For the destructive tests, a solid element representation of the SPR joint was created using the geometry and initial values from the springback. A shell-solid hybrid model was used to keep the computational time low.Using the method, a good correlation was found both for the process- and the destructive test simulations when compared to experiments. Furthermore, it could be concluded that friction, sheet thickness and rivet geometry affects the SPR joint strength and characteristics.
|
87 |
DESIGN AND BEHAVIOR OF STEEL-PLATE COMPOSITE (SC) WALL TO REINFORCED CONCRETE (RC) WALL MECHANICAL CONNECTIONHassan Sagheer Anwar (14160276) 29 November 2022 (has links)
<p>In safety-related nuclear structures, steel-plate composite (SC) walls are often used in combination with reinforced concrete (RC) walls or foundations. The design demands need to be transferred between the two different structural systems through appropriate connections without connection failure, which is often associated with brittle failure mode. This study presents a design procedure developed for mechanical connections between SC and RC walls. This procedure implements the full-strength connection design approach as per Specifications for Safety-Related Steel Structures for Nuclear Facilities, AISC N690-18, which requires connections to be stronger than the weaker of the connected walls. The study also presents the results from experimental and numerical investigations conducted to verify the structural performance of the full-strength SC wall-to-RC wall mechanical connection.</p>
<p>The experimental program involved testing six mechanical connections comprising four full-scale and two scaled specimens. The four specimens subjected to out-of-plane moment (OOPM) and out-of-plane shear (OOPV) represented a unit cell of a typical wall in a nuclear facility. The remaining two specimens subjected to in-plane shear (IPV) were scaled (1:3) to facilitate testing using the existing loading setup. Two specimens were tested for each loading scenario. The two specimens per loading case were differentiated by longitudinal rebar-to-baseplate connection plans: coupler (C) and double nut (DN). The performance, strength, ductility, and failure mode of the proposed mechanical connection were evaluated based on the experimental observations.</p>
<p>The observed governing failure mode of all test specimens was either RC wall flexural yielding or RC wall shear failure. The connection region steel plates (tie plates, wing plates, and baseplates) remained within their elastic range until failure ensuring energy dissipation away from the connection region. Additionally, the wing plates and baseplates strains remained comparatively lower than the tie plate strain values. This was attributed to the contribution of concrete during the force transfer between the two structural elements indicating that the proposed connection design procedure is suitable and conservative for SC wall-to-RC wall mechanical connections.</p>
<p>Three-dimensional (3D) finite element models (FEM) were developed and benchmarked against the experimental data to gain an additional insight into the connection behavior. Parametric studies were conducted to compensate for the limited experimental database and evaluate the influence of design parameters such as wall thickness and RC wall longitudinal reinforcement layers on the performance of the designed mechanical connection. Numerically predicted results compared favorably with experimental observations. The recommended design procedure is intended to help designers consider mechanically connecting SC-RC walls where non-contact lap splicing is not feasible and in an attempt to utilize the potential for accelerated construction time and enhanced structural performance of SC walls.</p>
<p><br></p>
|
88 |
Reinforced Concrete Structural Members Under Impact LoadingMohammed, Tesfaye A. January 2011 (has links)
No description available.
|
89 |
Design and Development of an Energy Absorbing Seat and Ballistic Fabric Material Model to Reduce Crew Injury Caused by Acceleration From Mine/IED BlastNilakantan, Gaurav 02 October 2006 (has links)
No description available.
|
90 |
The Development of an Improved Finite Element Muscle Model and the Investigation of the Pre-loading Effects of Active Muscle on the Femur During Frontal CrashesMendes, Sebastian B 31 August 2010 (has links)
"Mammalian skeletal muscle is a very complicated biological structure to model due to its non-homogeneous and non-linear material properties as well as its complex geometry. Finite element discrete one-dimensional Hill-based elements are largely used to simulate muscles in both passive and active states. There are, however, several shortfalls to utilizing one-dimensional elements, such as the impossibility to represent muscle physical mass and complex lines of action. Additionally, the use of one-dimensional elements restricts muscle insertion sites to a limited number of nodes causing unrealistic loading distributions in the bones. The behavior of various finite element muscle models was investigated and compared to manually calculated muscle behavior. An improved finite element muscle model consisting of shell elements and Hill-based contractile truss elements in series and parallel was ultimately developed. The muscles of the thigh were then modeled and integrated into an existing 50th percentile musculo-skeletal model of the knee-thigh-hip complex. Impact simulations representing full frontal car crashes were then conducted on the model and the pre-loading effects from active thigh muscles on the femur were investigated and compared to cadaver sled test data. It was found that the active muscles produced a pre-load femoral axial force that acted to slightly stabilize the rate of stress intensification on critical stress areas on the femur. Additionally, the active muscles served to direct the distribution of stress to more concentrated areas on the femoral neck. Furthermore, the pre-load femoral axial force suggests that a higher percentage of injuries to the knee-thigh-hip complex may be due to the effects of active muscles on the femur. "
|
Page generated in 0.0535 seconds