A successful transition from fossil fuels to renewable energies such as wind and solar will require the implementation of high-energy-density storage technologies. Promising energy storage technologies include lithium-ion batteries, metal-air batteries, and hydrogen production via photoelectrochemical water splitting. While these technologies differ substantially in their mode of operation, they often involve transition-metal oxides as a component. Thus, fundamental materials research on metal oxides will continue to provide much needed advances in these technologies. In this thesis, the electrochemical and electrocatalytic properties of Fe- and Mn-substituted layered LiNiO₂ materials were investigated. These materials were prepared by heating mixed nitrate precursors in O₂ atmosphere at 700-850 °C for 12 h with intermediate grindings. The products were chemically delithiated with NO₂BF₄, and the delithiated samples were annealed at moderate temperatures in order to transform them to a spinel-like phase. Samples were characterized by inductively coupled plasma analysis and Rietveld refinement of the X-ray diffraction patterns, which were found to be in reasonably close agreement regarding lithium stoichiometry. Spinel-like materials were found to possess an imperfect spinel structure when heated at lower temperatures and a significant amount of NiO impurity was formed when heated to higher temperatures. This structural disorder was manifested during electrochemical cycling -- only Mn-rich compositions showed reversible capacities at a voltage of around 4.5 V. The layered materials exhibited significant capacity loss upon cycling, and this effect was magnified with increasing Fe content. These materials were further investigated as catalysts for the oxygen evolution reaction (OER). All samples containing Mn exhibited low OER activity. In addition, delithiation degraded catalyst performance and moderate temperature annealing resulted in further degradation. Because delithiation significantly increased surface area, activities were compared to the relative to BET surface area. Li₀.₉₂Ni₀.₉Fe₀.₁O₂ exhibited significantly higher catalytic activity than Li₀.₈₉Ni₀.₇Fe₀.₃O₂. This prompted testing of Li[subscript x]Ni₁₋[subscript y]Fe[subscript y]O₂ (y = 0, 0.05, 0.1, 0.2, and 0.3) samples. It was found that a Fe content of approximately 10% resulted in the highest OER activity, with decreased activities for both larger and smaller Fe contents. These results were found to be consistent with studies of Fe substituted nickel oxides and oxyhydroxides, suggesting a similar activation mechanism. / text

Ni-rich layered oxide materials have gained significant attention due to the ongoing advances and demands in energy storage. The energy revolution continues to catapult the need for improved battery materials, especially for applications in portable electronic devices and electric vehicles. Lithium batteries are at the frontier of energy storage. Due to geopolitical concerns, there is a growing need to understand the chemistries of Co-free, Ni-rich layered oxide materials which are cost-efficient and possess increased practical capacity. The challenge to studying this class of materials is their inherent electronic and structural fragility. The fragility of these materials is facilitated by a cooperation of metal cation migration, lattice oxygen loss, and undesirable oxide cathode-electrolyte interfacial reactions. Each of these phenomena contribute to complex electrolyte decomposition pathways and oxide cathode structural distortions. Structural instability leads to poor battery performance metrics including specific capacity fading and decreased Coulombic efficiency. Electrolyte decomposition occurs at the oxide cathode surface, but it can lead to bulk electronic and structural changes, chemomechanical breakdown, and irreversible phase transformations in the material. The work in this dissertation focuses on understanding some of the chemistries associated with degradation of representative Ni-rich layered oxides, specifically LiNiO2 (LNO) and LiNixMnyCozO2 (NMC) (where x+y+z =1) materials. Chapter 1 provides a comprehensive review of the interfacial chemistries of fragile, Ni-rich layered oxide materials with carbonate-based liquid electrolytes. These reactions are key in deducing mechanistic pathways that promote thermal runaway. Uncontrollable oxygen loss and electrolyte oxidation leads to catastrophic battery fires and explosions. The chapter highlights the material properties that become perturbed during high states-of-charge which complicate the materials chemistry associated with Ni-rich layered oxides. Lastly, a few strategies to mitigate undesired, structurally detrimental reactions at the Ni-rich layered oxide cathode surface are provided in Chapter 1. To obtain the technical data detailed in this dissertation, a variety of analytical methods are employed. Chapter 2 introduces the working principles of the X-ray techniques, electron microscopy, and other quantification methods. X-ray techniques including synchrotron X-ray absorption spectroscopy (XAS), and its components XANES and EXAFS are discussed. Other X-ray techniques, including X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) are additionally included. Electron microscopy techniques, including transmission electron microscopy (TEM), scanning electron microscopy (SEM), and scanning transmission electron microscopy (STEM) are provided. Quantification methods, such as gas chromatography – flame ionization detection (GC-FID) and other electrochemical testing methods are also described. Detailed experimental information obtained using the analytical methods is provided in the technical chapters. In understanding the chemistry of Ni-rich layered oxides, exploring surface reconstruction is key. Surface reconstruction, a phenomenon caused by a collaboration between Li/Ni cation intermixing and lattice oxygen loss, is one of the major explanations for structural degradation in Ni-rich layered oxide materials. Chapter 3 explores surface reconstruction and deduces a mechanism by which lattice oxygen is loss in LiNi0.6Mn0.2Co0.2O2 (NMC622). By exploiting Li+ intercalation chemistry, the work emulates various states-of-charge to explore how delithiation impacts small, organic molecule oxidation. Benzyl alcohol serves as a good probing molecule. It is similar to an oxidizable, nonaqueous electrolytic species that undergoes oxidation at the oxide cathode surface. Structure-reactivity trends are defined to correlate electronic and structural changes, lattice oxygen loss, and small molecule oxidation. After studying a proxy molecule, a practical system is required to grasp the complexity of the cathode-electrolyte interfacial reactions that promote Ni-rich layered oxide degradation. In Chapter 4, an electrolyte stirring experiment is described. Stirring experiments provide an accelerated testing method which helps to deduce the influences of chemical electrolyte decomposition on structural degradation of LiNiO2 (LNO). X-ray techniques are used to illustrate electronic perturbations and structural distortions in the material after probing with EC/DMC w/w 3:7 LiPF6. Additionally, this dissertation chapter features a novel voltage oscillation experiment that is employed to quantify Ni-rich oxide cathode degradation at the phase transition regions. LNO has three charging plateaus – H1  M, M  H2, and H2  H3. The latter two plateaus have been largely associated with irreversible structural fragility in Ni-rich layered oxides. Cation intermixing and oxygen loss are two phenomena that are largely associated with decreased Li+ intercalation kinetics and increased undesired side reactions. Although researchers debate the chemical phenomenon that occur at each of the phase transitions, most agree that the H2  H3 transition is highly influenced by irreversible lattice oxygen loss. This dissertation chapter describes the studies used to explore the electronic changes and structural distortions that accompany the voltage oscillation electrochemical testing. While Ni-rich layered oxides are largely employed as lithium battery cathodes, this class of material is unique in that it is a reducible and electronically tunable. Electronically modifiable metal oxide materials provide a unique platform to lend information to other applications, such as catalysis. There is much debate surrounding the role of metal oxides on metal nanocatalyst performance for catalytically reductive pathways. Chapter 5 discusses the method of employing LiNiO2 and other NMC materials as electronically tunable metal oxides to determine the role of the reducible metal oxide support on the gold (Au) nanocatalyst for p-nitrophenol reduction to p-aminophenol. By obtaining a continuum of nickel (Ni) oxidation states using delithiation strategies, structural-activity relationship trends are provided. Conversion rates for each of the delithiated materials was calculated using pseudo first-order kinetics. Lastly, a detailed discussion on metal oxide reducibility and its influences on key mechanistic factors, such as the induction period is included. Chapter 6 in this dissertation provides conclusions for the technical work provided. It bridges the works together and describes the overarching findings associated with the chemistries of Ni-rich layered oxide materials. This dissertation lays the foundation for future experimentation and innovation in understanding the surface chemistry of Ni-rich layered oxides. Chapter 7 provides future perspectives for each of the technical works included herein. Additionally, the final chapter includes insights toward the future of lithium batteries and other cathode chemistries. As the world navigates the energy revolution, it is important to provide global perspectives expected to catapult a sustainable future with batteries towards a greener world. / Doctor of Philosophy / Rechargeable lithium batteries have gained a significant surge of interest due to the ongoing demands for portable electronic devices, as well as the global trend towards electric vehicles to decrease the carbon footprint. Lithium batteries reside at the pinnacle of the energy transition. Layered oxide materials are typically employed as the cathode in Li-ion batteries. Ni-rich layered oxides have gained much interest due to their low cost and good charge/discharge capabilities. As consumers want increased charging rates and longer lifetimes, researchers struggle to optimize the balance between incorporating Ni-rich cathodes and increased safety concerns caused by cathode structural fragility. The lack of structural robustness is largely due to the surface reactivity of Ni-rich layered oxide materials. Bonding arrangements and electron transfer pathways intrinsic to this class of material increases the complexity in understanding the surface chemistry and the associated degradation pathways. Oxygen loss is the major cause of the safety issues in lithium batteries such as battery fires and explosions. To mitigate the safety concerns, it is imperative to understand the chemistries that promote organic, liquid electrolyte decomposition, electronic and structural changes, chemomechanical breakdown, and irreversible phase transformations. Each of these components leads to decreased battery performance. The work in this dissertation describes model and practical platforms to probe and understand the chemistries associated with battery performance degradation. A variety of analytical methods were utilized to determine overall structure-activity relationship trends and are highlighted in Chapter 2. Chapters 3-5 is technical research providing insight on Ni-rich layered oxide degradation pathways and behaviors. The work advances the understanding of battery surface chemistry which will lead to improved cathode design. As batteries continue to grow, it is important to know other applications that benefit from the unique chemistry of Ni-rich layered oxide materials. By exploiting the lithium battery cathode chemistry, this dissertation highlights a method to utilize these materials to understand the role of metal oxides on Au nanocatalysts. Conclusions to the findings in this dissertation are provided in Chapter 6. Future perspectives on the technical research provided herein this dissertation is included in Chapter 7. Additionally, Chapter 7 details future perspectives for lithium batteries and how they can facilitate the global transition toward a sustainable future.

Alkali-ion batteries have revolutionized modern life through enabling the widespread application of portable electronic devices. The call for adapting renewable energy in many applications will also see an increase in the demand of alkali-ion batteries, specially to account for the intermittent nature of the renewable energy sources. However, the advancement of such technologies will require innovation on the forefront of materials development as well as fundamental understanding on the physical and chemical processes from atomic to device length scales. Herein, we focus on advancing energy storage devices such as alkali-ion batteries through cathode materials development and discovery as well as fundamental understanding through multiscale advanced synchrotron spectroscopic and microscopic characterizations. Multiscale electrochemical properties of cathode materials are unraveled through complementary characterizations and design principles are developed for stable cathode materials for alkali-ion batteries. In Chapter 1, we provide a comprehensive background on alkali-ion batteries and cathode materials. The future prospect of Li-ion and beyond Li-ion batteries are summarized. Surface to bulk chemistry of alkali-ion cathode materials is introduced. The prospect of combined cationic and anionic redox processes to enhance the energy density of cathode materials is discussed. Structural and chemical complexities in cathode materials during electrochemical cycling as well as due to anionic redox are summarized. In Chapter 2, we explain an inaugural effort on tuning the 3D nano/mesoscale elemental distribution of cathode materials to positively impact the electrochemical performance of cathode materials. We show that engineering the elemental distribution can take advantage of depth dependent redox reactions and curtail harmful side reactions at cathode-electrolyte interface which can stabilize the electrochemical performance. In Chapter 3, we show that the surface to bulk chemistry of cathode particles is distinct under applied electrochemical potential. We show that the severe surface degradation at the beginning stages of cycling can impact the long-term cycling performance of cathode materials in alkali-ion batteries. In Chapter 4, we utilize the structural and chemical complexities of sodium layered oxide materials to synthesize stable cathode materials for half cell and full cell sodium-ion batteries. Meanwhile, challenges with enabling long term cycling (more than 1000 cycles) are deciphered to be transition metal dissolution and local and global structural transformations. In Chapter 5, we utilize anionic redox in conjunction with conventional cationic redox of cathode materials for alkali-ion batteries to enhance the energy density. We show that the stability of anionic redox is closely related to the local transition metal environment. We also show that a reversible evolution of local transition metal environment during cycling can lead to stable anionic redox. In Chapter 6, we provide design principles for cathode materials for advanced alkali-ion batteries for application under extreme environments (e.g., outer space and nuclear power industries). For the first time, we systematically study the microstructural evolution of cathode materials under extreme irradiation and temperature to unravel the key factors affecting the stability of battery cathodes. Our experimental and computational studies show that a cathode material with smaller cationic antisite defect formation energy than another is more resilient under extreme environments. / Doctor of Philosophy / Alkali-ion batteries are finding many applications in our life, ranging from portable electronic devices, electric vehicles, grid energy storage, space exploration and so on. Cathode materials play a crucial role in the overall performance of alkali-ion batteries. Reliable application of alkali-ion batteries requires stable and high-energy cathode materials. Hence, design principles must be developed for high-performance cathode materials. Such design principles can be benefited from advanced characterizations that can reveal the surface-to-bulk properties of cathode materials. Herein, we focus on formulating design principles for cathode materials for alkali-ion batteries. Aided by advanced synchrotron characterizations, we reveal the surface-to-bulk properties of cathodes and their role on the long-term stability of alkali-ion batteries. We present tuning structural and chemical complexities as a method of designing advanced cathode materials. We show that energy density of cathode materials can be enhanced by taking advantage of a combined cationic and anionic redox. Lastly, we show design principles for stable cathode materials under extreme conditions in outer space and nuclear power industries (under extreme irradiation and temperature). Our study shows that structurally resilient cathode materials under extreme irradiation and temperature can be designed if the size of positively charged cations in cathode materials are almost similar. Our study provides valuable insights on the development of advanced cathode materials for alkali-ion batteries which can aid the future development of energy storage devices.

Li-ion batteries (LIBs) have achieved remarkable success in electric vehicles (EVs), consumer electronics, grid energy storage, and other applications thanks to a wide range of electrode materials that meet the performance requirements of different application scenarios. Cathodes are an essential component of LIBs, which governs the performance of commercial LIBs. Layered transition metal oxide, i.e., LiNixCoyMn1-x-yO2 (NMC), is one family of cathodes that are widely applied in the prevailing commercial LIBs. With increasing demand for high energy density, the development of layered oxide cathodes is towards high Ni content because Ni redox couples majorly contribute to the battery capacity. Meanwhile, the battery community has been making tremendous efforts to eliminate Co in layered cathodes due to its high cost, high toxicity, and child labor issues during Co mining. However, these Ni-rich Co-free cathodes usually suffer from low electrochemical and structural stability. Several strategies are adopted to enhance the stability of Ni-rich Co-free cathodes, such as doping, coating, and synthesizing single crystal particles. However, the design principles and synthesis mechanisms of these approaches have not been fully understood. Herein, we design and synthesize stable Ni-rich and low/no-Co layered oxide cathodes by manipulating the chemical and structural properties of cathode particles. Our studies reveal the cathode formation mechanisms and shed light on the cathode design through complementary synchrotron microscopic and spectroscopic characterization methods. In Chapter 1, the motivation for LIB research is introduced from the perspective of its indispensable role in achieving carbon neutrality. We then comprehensively introduce the status of LIBs at present, including assessing their sustainability, worldwide supply chain and manufacturing, and cathode materials. Subsequently, we focus on the Co-free layered oxide cathodes and discuss their structure, limitations, and strategies to address the challenges. Finally, we discuss single crystal Ni-rich layered oxide cathodes and the challenges and strategies associated with their synthesis. In Chapter 2, we investigate the dopant redistribution, phase propagation, and local chemical changes of layered oxides at multiple length scales using a multielement-doped LiNi0.96Mg0.02Ti0.02O2 (Mg/Ti-LNO) as a model platform. We observed that dopants Mg and Ti diffuse from the surface to the bulk of cathode particles below 300 °C long before the formation of any layered phase, using a range of synchrotron spectroscopic and imaging diagnostic tools. After calcination, Ti is still enriched at the cathode particle surface, while Mg has a relatively uniform distribution throughout cathode particles. Our findings provide experimental guidance for manipulating the dopant distribution upon cathode synthesis. In Chapter 3, we synthesized Mn(OH)2-coated single crystal LiNiO2 (LNO) and used it as the platform to monitor the Mn redistribution and the structural and chemical evolution of the LNO cathode. We use in situ transmission X-ray microscopy (TXM) to track the Mn tomography inside the LNO particle and Ni oxidation state evolution at various temperatures below 700 °C. We further reveal chemical and structural changes induced by different extents of Mn diffusion at ensemble-averaged scale, which validates the results at the single particle scale. The ion diffusion behavior in the cathode is highly temperature dependent. Our study provides guidance for ion distribution manipulation during cathode modification. In Chapter 4, we successfully fabricated a surface passivation layer for NMC particles via a feasible quenching approach. A combination of bulk and surface structural characterization methods show the correlation of surface layer with bulk chemistry including valence state and charge distribution. Our design enables high interfacial stability and homogeneous charge distribution, impelling superior electrochemical performance of NMC cathode materials. This study provides insights into the cathode surface layer design for modifying other high-capacity cathodes in LIBs. In Chapter 5, we use statistical tools to identify the significance of multiple synthetic parameters in the molten salt synthesis of single crystal Ni-rich NMC cathodes. We also create a prediction model to forecast the performance of synthesized single crystal Ni-rich NMC cathodes from the input of synthetic parameters with relatively high prediction accuracy. Guided by the models, we synthesize single crystal LiNi0.9Co0.05Mn0.05O2 (SC-N90) with different particle sizes. We find large single crystals show worse capacity and cycle life than small single crystals especially at high current rates due to slower Li kinetics. However, large single crystal has higher thermal stability potentially because of smaller specific surface area. The findings of particle size effect on the performance provide insights into size engineering while developing next-generation single crystal Ni-rich NMC cathodes. The statistical and prediction models developed in this study can guide the molten salt synthesis of Ni rich cathodes and simplify the optimization process of synthetic parameters. Chapter 6 summarizes our efforts on the novel design and fundamental understanding of the state-of-the-art cathodes. We also provide our future perspectives for the development of LIBs. / Doctor of Philosophy / Lithium-ion batteries (LIBs) have been studied for decades and are widely applied in electronics and vehicles because of their high energy density and long lifetime. With the increasing demand for higher energy density, particularly in electric vehicles, the development of Ni-based layered oxide cathode materials has been focused on increasing the Ni content. Meanwhile, decreasing or eliminating Co has become a consensus due to its high cost, toxicity, and human rights issues during mining. Enhancing the stability of these Ni-rich and low/no-Co layered oxide cathodes is challenging yet crucial to their practical applications. Herein, we design and synthesize multiple Ni-rich and low/no-Co layered cathodes through ion distribution engineering and structure modification at various length scales. We also investigate the dopant redistribution, phase propagation, and local chemical changes during layered oxides cathode formation through a combination of complementary characterization methods at different length scales. In addition, we provide guidance for synthesis optimization by statistical correlations and performance prediction models with the input of synthetic conditions. Overall, this dissertation provides insights into the design and synthesis principles of Ni-rich low/no-Co layered oxide cathode, which can facilitate the transition to a sustainable future with next-generation LIBs.

Consumers use batteries daily, and the lithium-ion battery has undergone a lot of engineering advances in the last few decades. There is a need to understand and improve the cathode chemistry to adapt to the rapidly growing electronics and electric vehicle market that is continually demanding more energy from batteries. Nickel-rich layered LiNi_1-x-yMn_xCo_yO₂ (1-x-y ≥ 0.6, NMC) cathodes could potentially provide the necessary energy to meet the demand of the high energy applications. Overcoming the stability issues from oxygen activation in nickel-rich materials is one of the largest challenges facing the commercial incorporation of NMCs. This thesis focuses on, LiNi_0.8Mn_0.1Co_0.1 (NMC811). Using surface sensitive techniques, such as Xray Absorption (XAS), our research reveals that degradation of NMC811 occurs during cycling, regardless of temperature, and that oxygen activation plays a role in the overall surface changes and degradation observed in NMC811. The thesis then explores the role of substituting a transition metal in the NMC811. Then we used a gradient addition of titanium to the NMC811 material to stabilize the battery performance. Theoretical techniques, such as Finite Difference Method Near Edge Structure, and experimental techniques, such as XAS, revealed how transition metal substitution, specifically titanium, stabilized the lattice. The results indicated that titanium deactivates oxygen by limiting the nickel and oxygen covalency that typically leads to oxygen activation upon charging. We observed that the titanium substitution increases cycling reversibility after hundreds of cycles. Overall, the work indicates that a more stable nickel-rich material is possible. It identifies the reasons why substitution can work in cathode materials. Additionally, the methods described can provide a guideline to further studies of stabilization of the cathode. / Master of Science / Consumers across the world use lithium-ion batteries in some fashion in their everyday life. The growing demand for energy has led to batteries dying quicker than consumers want. Thus, there are calls for researchers to develop batteries that are longer lasting. However, the initial increase in battery life over the years has been from better engineering and not necessarily from making a better material for a battery. This thesis focuses on the understanding of the chemistry of the materials of a battery. Throughout the chapters, the research delves into the how and why materials with extra nickel degrade quickly. Then, it investigates a method of making these nickel-rich materials last longer and how the chemistry within these materials are affected by the addition of a different metal. Overall, the findings indicate that the addition of titanium creates a more stable material because it mitigates the release of oxygen and prevents irreversible changes within the structure of the material. It determines that the chemistry behind the failings of nickel-rich lithium-ion batteries and a potential method for allowing the batteries to last longer. It also provides insight and guidance for potential future research of stabilization of lithium-ion materials.

Lithium-rich layered transition metal oxide cathode, represented as the chemical formula of xLi₂MnO₃ · (1 - x)LiMO₂(M = Mn, Ni, Co) , retains immense interest as one of the most promising candidates for energy storage system ranging from mobile devices to electric vehicle applications (EV/HEV/PHEV). This battery type benefits from superior theoretical capacity (>250 mAhg^-1), high chemical potential (>4.6 V vs Li⁰), good thermal stability, high discharge capacity and lower cost compared with conventional cathodes (e.g. LiCoO₂, Li(Ni_1/3Mn_1/3Co_1/3)O₂ cathodes). However, there remain major barriers which still need to be improved in order to achieve a successful commercialization for large-scale devices or electric vehicle applications. The irreversible capacity loss of 40-100 mAhg^-1 during the initial electrochemical cycle and the battery fading phenomena (capacity fading/voltage decay) on further cycles are the major problems which have emerged. The Li⁺ ion extraction accompanied by oxygen release from the active material in the form of oxide known as lithia (Li₂O) along with the transition metal migration has been suggested as the dominant processes underlying the capacity fading mechanism. Those processes, in turn, cause a phase transition from a layered structure into a spinel within the electrode material. The interplay of the local atomic environments between Li₂MnO₃ (monoclinic, C2/m) and LiMO₂ (trigonal/hexagonal, R3m) holds the key to developing better cathodes with enhanced stability. In the present thesis, an in operando XAS study using a specially-designed cell of the graphene- coated Li(Li_0.2Mn_0.54Ni_0.13Co_0.13)O₂ cathode is employed to examine the chemical, electronic, and structural states of the transition metals (Mn, Co, and Ni) during electrochemical cycle(s). Precise oxidation states for the transition metals is evaluated by the combined analyses from the XANES and SQUID measurements. The K-edge XANES spectral shift is quantified to investigate the contribution to the charge compensation mechanism by the oxidation change. Absorption features in K-edge XANES are identified. These features describe the electronic state of the individual atoms in the cathode composite, as well as the local distortion from the octahedral structure of MO₆. The Fourier transform of EXAFS offers a satisfactory description of the local structure changes with the connection to the cation arrangement. The description is generally involved with the peak amplitude, position, shape changes (trend), and coordination numbers in the real space. Hence, similarities or discrepancies in the local atomic environments could be compared at different state of charge. Major structural parameters are deduced from the EXAFS fitting process. These parameters can be used to distinguish different atomic environments upon voltage bias levels or investigate the appearance of the Jahn-Teller effect. A new approach to understand the atomic environment upon charge-discharge is demonstrated, namely, a Continuous Cauchy Wavelet Transform (CCWT) which enables the visualization of the EXAFS spectra in three dimensions by decomposing the k-space and R-space (uncorrected for phase shift) signals. The wavelet transform analysis provides possible evidence of the precursor that leads to the spinel phase transition in this battery system.

O estudo apresentado nesta Tese diz respeito à química dos niobatos lamelares e aborda a síntese, caracterização, avaliação da reatividade intracristalina e das propriedades luminescentes desses materiais. Os niobatos lamelares utilizados foram o hexaniobato K4Nb6O17, o triniobato KNb3O8 e as perovskitas lamelares K1-xLnxCa2-xNb3O10 (Ln = La, Eu e x = 0,02; 0,25; 0,50; 0,75 e 1,00). Esses materiais são constituídos de lamelas que apresentam cargas negativas e a região interlamelar é preenchida por íons de potássio que mantêm a neutralidade dos sistemas. A reatividade intracristalina dos niobatos lamelares foi avaliada frente à intercalação de espécies simples como a butilamina e volumosas como o macrociclo porfirínico, o polioxocátion de alumínio e compostos orgânicos de silício. A alta densidade de carga lamelar dos niobatos lamelares dificulta a intercalação direta de espécies volumosas, o que fez com que novas rotas sintéticas fossem desenvolvidas a fim de permitir a imobilização de tais espécies na região interlamelar. As metodologias sintéticas desenvolvidas foram baseadas, principalmente, no uso de dispersões coloidais dos niobatos esfoliados que, a partir da reestruturação na presença da espécie convidada de interesse, tornou possível a intercalação de espécies volumosas. As propriedades luminescentes dos niobatos lamelares são extremamente dependentes da estrutura do material. Os niobatos com estrutura tipo perovskita não apresentam emissão enquanto que o hexaniobato apresenta emissão apenas a 77 K e o triniobato, à temperatura ambiente. Neste estudo foram avaliadas as propriedades luminescentes dos niobatos EuxK4-3xNb6O17, EuxK1-3xNb3O8 e KCa2Nb3O10 (intercalado com Eu3+ e dopado com 1 % de Eu3+ ou La3+). Foram observados processos de transferência de energia tanto nos niobatos intercalados com Eu3+ quanto nos dopados. A dopagem também provocou mudanças nas propriedades fotofísicas dos niobatos com estrutura perovskita, os quais passaram a apresentar emissão da matriz de niobato mesmo à temperatura ambiente. / The study described in this Thesis is related to the synthesis and evaluation of some chemical properties of layered niobates with formulas K4Nb6O17 (hexaniobate), KNb3O8 (triniobate) and K1-xLnxCa2-xNb3O10 (layered perovskites - Ln = La, Eu and x = 0.02; 0.25; 0.50; 0.75 and 1.00). These niobates are constituted of negative layers and an interlayer region filled with potassium ions that maintain the system charge neutrality. The reactivity of these niobates was evaluated through intercalation reactions of simple species such as butylamine and bulky species such as porphyrin, aluminum polyoxocation and organosilanes. The high charge density of the niobate layer makes the direct intercalation of bulky guest species more difficult. Therefore, to overcome this situation, new synthetic routes were developed. The intercalation of bulky species was achieved by using colloidal dispersions of exfoliated niobates that, upon restaking, incorporate the guest species into the interlayer region. The luminescent properties of the lamellar niobates are very dependent on the structure. Niobates that present a perovskite structure do not show emission even at liquid helium temperature. The hexaniobate presents emission at nitrogen liquid temperature and triniobate at both room and 77 K temperatures. In this study the luminescent properties of EuxK4-3xNb6O17, EuxK1-3xNb3O8 e KCa2Nb3O10 (intercalated with Eu3+ and doped with 1 % of Eu3+ or La3+) were evaluated. Charge transfers processes were observed in both intercalated and doped niobates with Eu3+ ion. The lanthanide doping also promoted changes in the photophysical properties of niobates with perovskite structure, which become to show emission of the niobate group even at room temperature.

O estudo apresentado nesta Tese diz respeito à química dos niobatos lamelares e aborda a síntese, caracterização, avaliação da reatividade intracristalina e das propriedades luminescentes desses materiais. Os niobatos lamelares utilizados foram o hexaniobato K4Nb6O17, o triniobato KNb3O8 e as perovskitas lamelares K1-xLnxCa2-xNb3O10 (Ln = La, Eu e x = 0,02; 0,25; 0,50; 0,75 e 1,00). Esses materiais são constituídos de lamelas que apresentam cargas negativas e a região interlamelar é preenchida por íons de potássio que mantêm a neutralidade dos sistemas. A reatividade intracristalina dos niobatos lamelares foi avaliada frente à intercalação de espécies simples como a butilamina e volumosas como o macrociclo porfirínico, o polioxocátion de alumínio e compostos orgânicos de silício. A alta densidade de carga lamelar dos niobatos lamelares dificulta a intercalação direta de espécies volumosas, o que fez com que novas rotas sintéticas fossem desenvolvidas a fim de permitir a imobilização de tais espécies na região interlamelar. As metodologias sintéticas desenvolvidas foram baseadas, principalmente, no uso de dispersões coloidais dos niobatos esfoliados que, a partir da reestruturação na presença da espécie convidada de interesse, tornou possível a intercalação de espécies volumosas. As propriedades luminescentes dos niobatos lamelares são extremamente dependentes da estrutura do material. Os niobatos com estrutura tipo perovskita não apresentam emissão enquanto que o hexaniobato apresenta emissão apenas a 77 K e o triniobato, à temperatura ambiente. Neste estudo foram avaliadas as propriedades luminescentes dos niobatos EuxK4-3xNb6O17, EuxK1-3xNb3O8 e KCa2Nb3O10 (intercalado com Eu3+ e dopado com 1 % de Eu3+ ou La3+). Foram observados processos de transferência de energia tanto nos niobatos intercalados com Eu3+ quanto nos dopados. A dopagem também provocou mudanças nas propriedades fotofísicas dos niobatos com estrutura perovskita, os quais passaram a apresentar emissão da matriz de niobato mesmo à temperatura ambiente. / The study described in this Thesis is related to the synthesis and evaluation of some chemical properties of layered niobates with formulas K4Nb6O17 (hexaniobate), KNb3O8 (triniobate) and K1-xLnxCa2-xNb3O10 (layered perovskites - Ln = La, Eu and x = 0.02; 0.25; 0.50; 0.75 and 1.00). These niobates are constituted of negative layers and an interlayer region filled with potassium ions that maintain the system charge neutrality. The reactivity of these niobates was evaluated through intercalation reactions of simple species such as butylamine and bulky species such as porphyrin, aluminum polyoxocation and organosilanes. The high charge density of the niobate layer makes the direct intercalation of bulky guest species more difficult. Therefore, to overcome this situation, new synthetic routes were developed. The intercalation of bulky species was achieved by using colloidal dispersions of exfoliated niobates that, upon restaking, incorporate the guest species into the interlayer region. The luminescent properties of the lamellar niobates are very dependent on the structure. Niobates that present a perovskite structure do not show emission even at liquid helium temperature. The hexaniobate presents emission at nitrogen liquid temperature and triniobate at both room and 77 K temperatures. In this study the luminescent properties of EuxK4-3xNb6O17, EuxK1-3xNb3O8 e KCa2Nb3O10 (intercalated with Eu3+ and doped with 1 % of Eu3+ or La3+) were evaluated. Charge transfers processes were observed in both intercalated and doped niobates with Eu3+ ion. The lanthanide doping also promoted changes in the photophysical properties of niobates with perovskite structure, which become to show emission of the niobate group even at room temperature.

Au vu d’une demande croissante pour un stockage d’énergie à grande échelle, il est préférable de se tourner vers des matériaux peu coûteux et répandus. De ce point de vue, le sodium, qui présente des caractéristiques très proches de celles du lithium, présente également l’avantage d’être peu coûteux, abondant et réparti uniformément dans le monde. Cette thèse porte sur l’étude d’un système complet Na-ion constitué d’un carbone dur à l’électrode négative et d’un oxyde lamellaire à l’électrode positive. Un volet sur l’électrolyte a également été abordé.Concernant l’électrode négative, l’influence de la température de pyrolyse de la cellulose sur la structure des carbones durs et sur les performances électrochimiques a été étudiée. Une graphitisation localisée, une fermeture des pores et une évolution de la porosité interne avec la température de pyrolyse ont pu être observées. Les meilleures performances électrochimiques ont été obtenues pour le matériau synthétisé à 1600 °C : une capacité réversible d’environ 300 mAh.g-1 stable sur 200 cycles est atteinte à 37,2 mA.g-1 avec une efficacité coulombique initiale de 84 %. Pour mieux comprendre les mécanismes d’insertion du sodium dans ces matériaux, des études par spectroscopie d’impédance, SAXS et EDX ont été réalisées sur des carbones durs cyclés à différents potentiels.Le matériau d’électrode positive choisi est l’oxyde lamellaire Na0,6Ni0,25Mn0,75O2. L’influence de la température de calcination a permis de faire varier le nombre de défauts d’empilement de type P3 au profit d’une phase P2 plus cristalline. Après avoir optimisé l’électrolyte à base de carbonates pour garantir la reproductibilité des tests oxyde lamellaire//sodium métal, une capacité d’oxydation de 130 mAh.g-1 a pu être atteinte au premier cycle avant de chuter fortement sur les 40 cycles suivants. Cette perte de capacité a pu être en partie expliquée par des études de DRX operando. Enfin, ces travaux ont permis d’aboutir à des systèmes complets Na-ion dont les premiers résultats sont prometteurs. / Because of the development of renewable energy and electric vehicles, the need for a large scale energy storage has increased. This type of storage requires a large amount of raw materials. Therefore low cost and abundant resources are necessary. Consequently the use of sodium batteries is of interest because sodium’s low cost, high abundance, and worldwide availability. This PhD thesis deals with the study of a full Na-ion cell containing a hard carbon negative electrode, and a layered oxide positive electrode. A shorter part concerns the electrolyte.Concerning the negative electrode, the first objective was to understand in detail the influence of the pyrolysis temperature of a hard carbon precursor, cellulose, on the final structure of the material and its consequences on the electrochemical performance. Many techniques were used to characterize the hard carbon structure as a function of the pyrolysis temperature. Localized graphitization, pore closure, and an increase in micropore size have been observed with increasing temperature. The best electrochemical performance has been reached with the hard carbon synthesized at 1600°C: a reversible capacity of around 300 mAh.g-1 stable over 200 cycles is obtained at 37.2 mA.g-1 with an initial coulombic efficiency of 84%. To deeper understand sodium insertion mechanisms in hard carbon structures impedance spectroscopy, SAXS and EDX were carried out on hard carbon electrodes cycled at different voltages.The layered oxide Na0.6Ni0.25Mn0.75O2 was investigated as the positive electrode. It was observed that with increasing calcination temperature the number of P3-type stacking faults decreases in favor of a more crystalline P2 phase. Then, the carbonate-based electrolyte has been optimized to guarantee the reproducibility of the electrochemical tests performed in a layered oxide//sodium metal configuration. A first oxidation capacity of around 130 mAh.g-1 is reached. However this value drops quickly after 40 cycles. Operando XRD analysis did partially explain the capacity decrease. Finally, the results of these investigations were used to design an optimized full cell which demonstrated promising performance during initial testing.

Developing new materials with desired properties is a vital component of emerging technologies. Functional hybrid compounds make an important class of advanced materials that let us synergistically utilize the key features of the organic and inorganic counterparts in a single composite, providing a very strong tool to develop new materials with ”engineered” properties. The research presented here, summarizes efforts in the development of facile and efficient methods for the fabrication of three- and two-dimensional inorganic-organic hybrids based on layered oxide perovskites. Microwave radiation was exploited to rapidly fabricate and modify new and known materials. Despite the extensive utilization of microwaves in organic syntheses as well as the fabrication of the inorganic solids, the work herein was among the first reported that used microwaves in topochemical modification of the layered oxide perovskites. Our group specifically was the first to perform rapid microwave-assisted reactions in all of the modification steps including proton exchange, grafting, intercalation, and exfoliation, which decreased the duration of multi-step modification procedures from weeks to only a few hours. Microwave-assisted grafting and intercalation reactions with n-alkyl alcohols and n-alkylamines, respectively, were successfully applied on double-layered Dion-Jacobson and Ruddlesden-Popper phases (HLaNb2O7, HPrNb2O7, and H2CaTa2O7), and with somewhat more limited reactivity, applied to triple-layered perovskites (HCa2Nb3O10 and H2La2Ti3O10). Performing neutron diffraction on n-propoxy-LaNb2O7, structure refinement of a layered hybrid oxide perovskite was then tried for the first time. Furthermore, two-dimensional hybrid oxides were efficiently prepared from HLnNb2O7 (Ln = La, Pr), HCa2Nb3O10, HCa2Nb2FeO9, and HLaCaNb2MnO10, employing facile microwave-assisted exfoliation and post-exfoliation surface-modification reactions for the first time. A variety of surface groups, saturated or unsaturated linear and cyclic organics, were successfully anchored onto these oxide nanosheets. Properties of various functionalized metal-oxide nanosheets, as well as the polymerization of some monomer-grafted nanosheets, were then investigated for the two-dimensional hybrid systems.