<p>Currently there is a dearth of analytical techniques for studying protein-ligand interactions on the proteomic scale. Existing techniques, which rely on various calorimetry or spectroscopy methods, are limited in their application to the proteomic scale due to their need for large amounts of pure protein. Recently, several mass spectrometry-based methods have been developed to study protein-ligand interactions. These mass spectrometry-based methods overcome some of the limitations of existing techniques by enabling the analysis of unpurified protein samples. However, the existing mass spectrometry-based methodologies for the analysis of protein-ligand binding interactions are not directly compatible with current mass spectrometry-based proteomics platforms. </p><p>Described here is the development and application of a new technique designed to detect and quantify protein-ligand binding interactions with mass spectrometry-based proteomic platforms. This technique, termed SPROX (Stability of Proteins from Rates of Oxidation), uses an irreversible covalent oxidation labeling reaction to monitor the global unfolding reactions of proteins to measure protein thermodynamic stability. Two variations of the SPROX technique are established here, including one variation that utilizes chemical denaturant to induce protein unfolding and a second variation that utilizes temperature to denature proteins. The SPROX methodology is tested on five proteins including ubiquitin, ribonuclease A, bovine carbonic anhydrase II, cyclophilin A, and calmodulin. Results obtained on these model systems are used to determine the method's ability to measure the thermodynamic parameters associated with each protein's folding/unfolding reaction. Results obtained on calmodulin and cyclophilin A are used to determine the method's ability to quantify the dissociation constants of protein-ligand complexes.</p><p>The primary motivation for the development of the SPROX protocols in this work was to create a protein-ligand binding assay that could be interfaced with conventional mass spectrometry-based platforms. Two specific SPROX protocols, including a label-free approach and an oxygen-16/18 labeling approach, are developed and demonstrated using the thermal SPROX technique to analyze ligand binding in a model four-protein component mixture consisting of ubiquitin, ribonuclease A, bovine carbonic anhydrase, and cyclophilin A. The thermal SPROX technique's ability to detect cyclosporin A binding to cyclophilin A in the context of the model mixture is shown using both labeling approaches. </p><p>An application using the SPROX technique combined with a multi-dimensional protein identification technology (MudPIT)-based proteomics platform is also described. In this application, which utilized an isobaric mass tagging strategy, 325 proteins in a yeast cell lysate are simultaneously assayed for CsA-binding. This study was also used to investigate the protein targets of an already well-studied immunosuppressive drug, cyclosporin A. Two of the ten protein targets identified in this work are known to interact with CsA, one through a direct binding event and one through an indirect binding event. The eight newly discovered protein targets of CsA suggest a molecular basis for post-transplant diabetes mellitus, which is a side effect of CsA in humans.</p> / Dissertation

The human body is an intricate network of many highly regulated biochemical processes and cell adhesion is one of them. Cell adhesion is mediated by specific interactions between molecules on apposing cell surfaces and is critical to many physiological and pathological processes like inflammation and cancer metastasis. During inflammation, blood-borne circulating leukocytes regularly stick to and roll on the vessel walls, which consist in part, adhesive contacts mediated by the selectin family of adhesion receptors (P-, E- and L-selectin). This is the beginning of a multi-step cascade that ultimately leads to leukocyte recruitment in areas of injury or infection. In vivo, selectin-mediated interactions take place in a hydrodynamic milieu and hence, it becomes imperative to study these interactions under very similar conditions in vitro. The goal of this project was to characterize the kinetic and mechanical properties of selectin interactions with different physiologically relevant ligands and selectin-specific monoclonal antibodies (mAbs) under a mechanically stressful milieu, using atomic force microscopy (AFM). Elasticity studies revealed that bulk of the complex compliance came from the selectins, with the ligands or mAbs acting as relatively stiffer components in the stretch experiments. Furthermore, molecular elasticity was inversely related to selectin length with the Consensus Repeats (CRs) behaving as Hookean springs in series. Besides, monomeric vs. dimeric interactions could be clearly distinguished from the elasticity measurements. L-selectin dissociation studies with P-selectin Glycoprotein Ligand 1 (PSGL-1) and Endoglycan revealed that catch bonds operated at low forces while slip bonds were observed at higher forces. These results were consistent with previous P-selectin studies and suggested that catch bonds could contribute to the shear threshold for L-selectin-mediated rolling By contrast, only slip bonds were observed for L-selectin-antibody interactions, suggesting that catch bonds could be a common characteristic of selectin-ligand interactions. Force History studies revealed that off-rates of L-selectin-sPSGL-1 (or 2-GSP-6) interactions were not just dependent on applied force, as has been widely accepted but in fact, depended on the entire history of force application, thus providing a new paradigm for how force could regulate bio-molecular interactions. Characterizing selectin-ligand interactions at the molecular level, devoid of cellular contributions, is essential in understanding the role played by molecular properties in leukocyte adhesion kinetics. In this aspect, data obtained from this project will not only add to the existing body of knowledge but also provide new insights into mechanisms by which selectins initiate leukocyte adhesion in shear.

The phenylalanine hydroxylase from Chromobacterium violaceum (CvPheH) is a non-heme iron monooxygenase that catalyzes the hydroxylation of phenylalanine. This study presents the use of kinetic isotope effects (KIE) as mechanistic probes to compare the reactivity of CvPheH and that of the eukaryotic aromatic amino acid hydroxylases. This study also describes the use of different spectroscopic and kinetic techniques to identify the hydroxylating intermediate for this enzyme and the assignment of the NMR backbone resonances of CvPheH. Kinetic isotope effects on aromatic and benzylic hydroxylation were used to establish that bacterial and eukaryotic phenylalanine hydroxylases have similar reactivity. The observed KIE on aromatic hydroxylation of 1.4 was shown to be a combination of an inverse isotope effect on the hydroxylation of the amino acid and a normal isotope effect on a subsequent step in the reaction. An isotope effect on benzylic hydroxylation of 10 was found for CvPheH. This result establishes the similar reactivity for CvPheH and the eukaryotic aromatic amino acid hydroxylases and suggests the involvement of a common hydroxylating intermediate. Kinetic isotope effects were used to study the hydroxylation of the aliphatic substrate cyclohexylalanine. The Dkcat value with [1,2,2,3,3,4,4,5,5,6,6-2H11]- cyclohexylalanine is unity with wild-type CvPheH, suggesting that chemistry is not ratelimiting with this substrate. The intramolecular isotope effect calculated using [1,2,3,4,5,6-2H6]-cyclohexylalanine yields a value of 14. This result is evidence for the involvement of a reactive iron species capable of abstracting a hydrogen atom from the aliphatic carbon in cyclohexylalanine. Analysis of the CvPheH reaction using freeze-quench Mössbauer spectroscopy allowed the detection of an Fe(IV) species in the first turnover of the enzyme. Chemical quench and stopped-flow spectrophotometric methods were used to establish the kinetic competency of the Fe(IV) intermediate as the hydroxylating species. The NMR amide backbone resonances in the HSQC spectrum of CvPheH were assigned to the corresponding amino acid residues using a suite of TROSY-based threedimensional triple resonance experiments. We were able to assign 224 residues out of the 278 assignable residues in CvPheH, this constitutes 81 percent of the assignable protein sequence.

An in silico design algorithm has been developed to design binding ligands for protein targets of known three-dimensional structure. In this method, the binding energy of a candidate ligand is used to ascribe it a probability of binding. A sample of a virtual library of candidate ligands is then used to ascribe implicit weights to all the ligands in the library. These weights are used to obtain virtual sub-libraries which collectively carry a greater probability to bind to the target. This algorithm is presented along with validation studies on the different algorithmic components, demonstrating how optimization of the design method can be best achieved.

Thesis (M. S.)--Biomedical Engineering, Georgia Institute of Technology, 2006. / Committee Chair: Zhu, Cheng; Committee Member: Babensee, Julia; Committee Member: Dustin, Michael; Committee Member: Garcia, Andres; Committee Member: Jo, Hanjoong; Committee Member: van der Merwe, Anton. Part of the SMARTech Electronic Thesis and Dissertation Collection. Non-Latin script record

Thesis (Ph. D.)--University of Washington, 2002. / Vita. Includes bibliographical references (leaves 141-161).

Thesis (Ph. D.)--University of Oregon, 2002. / Typescript. Includes vita and abstract. Includes bibliographical references (leaves 159-167). Also available for download via the World Wide Web; free to University of Oregon users.

Thesis (Ph. D.)--University of Washington, 2003. / Vita. Includes bibliographical references (leaves 110-117).

Thesis (M. Sc.)--York University, 2001. Graduate Programme in Biology. / Typescript. Includes bibliographical references (leaves 106-118). Also available on the Internet. MODE OF ACCESS via web browser by entering the following URL: http://wwwlib.umi.com/cr/yorku/fullcit?pMQ66399.

A central goal of computational biophysics and biochemistry is to understand the behavior, interactions, and reactions of molecules, and to interpret and facilitate experimental design. The objective of this thesis research is to use the molecular modeling and simulation techniques to advance our understanding of principles in molecular structure properties, recognition and interaction at the atomic level. First, a physical molecular mechanics model is built to study the conformational properties of depsipeptide, which shows potential for engineered protein mimetics with controllable structure and function. We explore the possible kinase-substrate binding modes and the likelihood of an [alpha]-helix docking interaction within a kinase active site. Finally, efficient physical models based on a polarizable potential function are developed to describe the structural properties and calculate protein-ligand binding affinities accurately for both trypsin and matrix metalloproteinase. / text