No description available.

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第22759号 / 工博第4758号 / 新制||工||1744(附属図書館) / 京都大学大学院工学研究科都市社会工学専攻 / (主査)教授 三村 衛, 教授 渦岡 良介, 准教授 肥後 陽介 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

The city of Wellington has a high population concentration and lies within a geologically active landscape at the southern end of the North Island, New Zealand. Wellington has a high seismic risk due to its close proximity to several major fault systems, with the active Wellington Fault located in the north-western central city. Varying soil depth and properties in combination with the close proximity of active faults mean that in a large earthquake rupture event, ground shaking amplification is expected to occur in Thorndon, Te Aro and around the waterfront. This thesis focuses on the area bounded by Thorndon Overbridge in the north, Wellington Hospital in the south, Kelburn in the west, and Oriental Bay in the east. It includes many of the major buildings and infrastructural elements located within the central Wellington commercial area. The main objectives were to create an electronic database which allows for convenient access to all available data within the study area, to create a 3D geological model based upon this data, and to define areas of different seismic subsoil class and depth to rock within the study area at a scale that is useful for preliminary geotechnical analysis (1:5,000. Borelogs from 1025 holes with accompanying geological and geotechnical data obtained from GNS Science and Tonkin & Taylor were compiled into a database, together with the results from SPAC microtremor testing at 12 sites undertaken specifically for this study. This thesis discusses relevant background work and defines the local Wellington geology. A 3D geological model of the central Wellington commercial area, along with ten ArcGIS maps including surficial, depth to bedrock, site period, Vs30, ground shaking amplification hazard and site class (NZS 1170.5:2004) maps were created. These outputs show that a significant ground shaking amplification risk is posed on the city, with the waterfront, Te Aro and Thorndon areas most at risk.

[pt] O fenômeno de liquefação continua sendo um dos temas mais importantes, complexos e controversos da engenharia geotécnica, sendo a liquefação dinâmica, causada por terremotos, o maior contribuinte de risco sísmico urbano em vários países andinos. O movimento causa incrementos da poropressão que reduz a tensão efetiva e conseqüentemente a resistência ao cisalhamento de solos arenosos. O presente trabalho de pesquisa apresenta e compara algumas das metodologias existentes para a avaliação do fenômeno de liquefação dinâmica, variando desde o método semi-empírico de Seed-Idriss para estimativas do potencial de liquefação até a execução de algumas análises numéricas, no contexto dinâmico, através do programa computacional FLAC 2D v.5. Um estudo de caso, para uma comparação dos diversos procedimentos, consiste na análise dinâmica de uma pilha de lixiviação de minério de cobre, situada em região de atividade sísmica no Peru que, devido a problemas no sistema de drenagem interna, resultou com um alto nível de saturação que poderia colocar sua estabilidade em risco devido à possibilidade de liquefação sob carregamento sísmico. Dos resultados obtidos nessas análises, pode-se afirmar que o método semi-empírico de Seed-Idriss, para determinação do potencial de liquefação, compara-se bastante bem com modelos mais sofisticados baseados em análises dinâmicas empregando tanto o modelo constitutivo de Finn quanto o modelo constitutivo elastoplástico UBCSAND. / [en] The phenomenon of liquefaction is still one of the most important, complex and controversial subjects of the geotechnical engineering, being the dynamic liquefaction, caused by earthquakes, the major contributor to urban seismic risks in several Andesian countries. The shaking increases the pore water pressure which reduces the soil effective stress and, therefore, the shear strength of sandy soils. This dissertation presents and compares some of the proposed methodologies to evaluate the phenomenon of dynamic liquefaction, ranging from the semi-empirical method of Seed-Idriss to estimate the liquefaction potential to the execution of some numerical analyses, within the dynamic context, through the computational program FLAC 2D v.5. The case study, for the comparison among the several procedures, consists of a copper ore heap leach, situated in a high seismic activity zone in Peru, that experimented high levels of saturation, due to problems in the internal drainage system, that could put in risk the stability of the leach pad to the possibility of liquefaction under seismic loading. From the results of such analyses, one can say that the semi-empirical method proposed by Seed- Idriss for the determination of the liquefaction potential compares quite well with outputs from more sophisticated numerical analyses based on dynamic studies that incorporate either the Finn s or the elasto-plastic UBCSAND constitutive models.