The subject of this thesis is the solution of a new building of nursery school in the part of city Brno – Tuřany. It is a cellarless, detached building and single-storey building. Nursery school will be two classes with 40 children. The floor plan is irregularly – shaped plan with orientation of the classes to the east. Building is designed from structural masonry system Porotherm with contact thermal insulation system. Roofing is solved with use of two different slopes of timber girder.

The thesis deals with the design and review of the supporting structure of the exhibition pavilion in the suburb of Brno. The design is shaped dome built over the octagonal floor plan with eight lateral niches. The pavilion is 30m wide and 8 meters tall.

Within the frame of my master's thesis I processed a project documentation for a construction of an apartment house in Brno – Židenice. The building is unattached and has 7 floors. On the ground floor there are four individual garages, cellar cubicles and a utility room. There are apartments on all other floors. On the highest floor, there is situated a singular apartment with outdoor terrace and vegetation area. The building is founded on strips made of reinforced concrete, vertical load-bearing structure is made of cermic blocks, floor structure is made of hollow core slabs and staircase is also made of prefabricated elements. The house is insulated with contact thermal insulation made of mineral wool. During the process of creating the projet, I followed all the requirements of actual regulations and legal enactments, to provide sufficient mechanical endurance and stability, health safety of the inner space as well as safety of the natural environment.

This master thesis deals with a draft of precast concrete frame structure on the case of gymnasium building. The major part of this work are transversal and longitudinal frames, consisted of footings, columns, girders and precast floor slab. Other parts of the building are not solved. Thesis consists both static calculations and drawings.

Subject of the thesis is experimental verification of load capacity of construction for storage coal by using load test. In the first part, the analysis of sorts of load tests is made and its execution in causality with standard regulations. Further possible options of bringing test load are described and also the method of evaluation of static load test. Second part looks into the analysis of means of measurement which can be used to determine required quantity. Final part is dedicated to realization and evaluation of the load test on material construction followed by comparison of experimental values with values established on a model of construction created by using computing program.

This master's thesis deals with design of the timber structure four-storey building. Plan dimensions of the hall are 20 x 30 m. The structure is designed for the Třebíč. The structure is designed as a heavy timber frame. The axial distance of arches is 5 m. The timber structure is placed between the reinforced concrete towers.

The master's thesis deals with static analysis of selected reinforced concrete elements of an apartment building. Specifically solved are the reinforced concrete slab of above-ground floor, point-supported slab of underground garage, the most exposed column, staircase, load-bearing wall of shear core, external load-bearing wall and building foundation on piles. Load effects were calculated using the Axis VM 12 software. Design of foundation was solved in the Geo 5 software. The thesis includes shape drawing documentation of selected elements.

The subject of this diploma thesis is the construction of a timber foot bridge over the wolf run in the Šumava National Park. The total length of the bridge is 240 m with two ground plan bends. The foot bridge includes three viewing decks, two of which are covered with shed roofs. The foot bridge is divided into 16 segments. Each segment is 15 m long with a width of 2.2 meters. The ground plan dimensions of the viewing decks are approximately 15x7 and 15x11 m. As the main structural material has been chosen glued laminated timber of the strength class GL28h, other elements are made of solid timber of the strength class C24. The thesis includes an introductory document, options analysis, technical report, static analysis, bill of material and drawings.

The subject of master’s thesis is design and assessment of steel load-bearing construction of atypical family house in Vrchlabí. Structure is designed as multi-storey steel structure, cooperating with stiff concrete core. The design was considered in four different options which combines possibility of using steel, steel and timber with different way of stiffness for whole structure. There is also composite steel-concrete alternative floor trimmer for selected option. Design and assessment was conducted in accordance with the applicable standards and by using software Scia Engineer.

The content of the thesis is a proposal of steel load-bearing structure (carrying structure of a steel) bridge of the span of 31+74+31m with the bottom bridge deck taking over the second-class road in the territory of Olomouc city. The bridge deck is created by composite steel-concrete slab with crossbars. The solution was focused on using arched construction in the middle of the bridge with different tilt of arches to the horizontal central axis of the bridge. Under the term of the solution four alternatives have been calculated. The most optimal solution was selected and processed in detail. The calculations were made in compliance with the Czech technical norms ČSN EN.