This thesis deals with structural design of a steel frame footbridge with wheelchair access, which will lead pedestrian and cyclists‘ traffic over the river Thaya in Břeclav. The footbridge is a structure of one field, lightness of a bridge opening is 58,92 m and a span length is 60,25 m. A light width of an area between rails is 2,5 m. The footbridge is constructed of a truss beam cable – stayed bridge on an oblique pylon of 20,0 m length and a preloaded steel suspender. The thesis was processed according to valid standards ČSN EN.

The goal of the diploma thesis is to design and assess a steel structure of ice stadium in Česká Třebová. The ground plan dimensions of the load–bearing structure are 66 meters in width and 66 meters in length. The maximal height of the structure is 15 meters. The main frames are made of truss girders of elliptical shape. The girders are pin–supported on solid columns on both sides. The distance between the main frames is 6 meters, the distance between the solid purlins on the girder is 3 meters. There are two variants designed and compared in the thesis. In the first variant there are two-dimensional truss girders in the main hall, whereas in the second variant they are replaced with three dimensional ones.

This diploma thesis is focused on design cast-in-place reinforced concrete structure multi-storey multifunctional building according to the source material. Specifically, foundation slab and external wall in B1 taking into account the waterproofness of the construction. Then staircase, column in lowest storey and two floor slab are designed as selected load-bearing structure. Elements are dimensioned according to ČSN EN 1992-1-1: Design of concrete structures - general rules and rules for building structures. In the drawing part of the diploma thesis are drawn drawings of the shapes and reinforcement.

The diploma thesis deals with the design of a steel technological structure in the locality of Štětí. The struture is used for the paper production technology. The geometry of the structure was customized to technological requests. The statistic system was considered in two versions – joint connections and frame – joint connections. The frame – joint connections system was chosen for detail processing. The steel structure was calculated by Scia Engineer 19 software. The connections were calculated by Idea statica software. The thesis is processed according to valid standars of ČSN EN.

This diploma thesis deals with design of the structure of the shelter i the park of city Hranice na Moravě. This load-bearing structure is made of glued laminated wood with the strength class GL24h. The structure has the shape of half ball and the load-bearing beams are in the shape of an arc. This building will be mainly used for cultural purposes. Ground plan dimensions of this shelter are 25x25 m. A complete static design solution including of all connection details and anchoring has been solved.

The aim of the diploma thesis is to design particular vertical and horizontal elements of the prefabricated gym hall. The supporting structure of the gym is formed by means of the column system with the use of the roof preloaded trusses. The entrance part of the building is designed as a column system using load-bearing beams and prefabricated ceiling sections. Overall, the structure of the building consists of columns, footings, foundation beams, reinforcing beams, prefabricated components which function as a ceiling structure, components functioning as a grandstand, a load - bearing beams a preloaded roof trusses V1. The diploma thesis designs particular supporting elements of the construction together with the construction of a grandstand.

The goal of this master´s thesis is to design load bearing structure of a sports hall. The thesis is elaborated in two variants of the structure design of the sports hall for common types of sports (handball, footsal, tennis, volleyball, basketball). The ground plan dimension is 42 to 72 meters and the construction height is 8 meters. The construction is designed for the district of Brno city. In the structural anlysis there were the following main load bearing structural elements designed and examined: glue laminated timber truss, wood purlins, steel beams, rods and bracing, columns, which together with the transverse girders are linked and foot and anchoring. The selected variant is also further developed. Part of the work is drawing documentation of the choosen variant, disposition drawing and drawings of the selected details.

This thesis solves the project of materniti house in moderate terrain. Materniti house is located on the grounds numbers 1475 in the village Jezeřany - Maršovice. The building has two floors. Materniti house is designed for 60 children and 15 employees. Building serves as a pre-school institution for the education of children. The buiding has a load-bearing wall system. The outer walls, load–bearing walls and partitions are from ceramic blocks POROTHERM. Wall is insulated with mineral wool BAUMIT thickness of 100 mm. The ceilings are made of prestressed hollow panels Spiroll HCE 250 thickness of 250 mm. The roof of building is part of the aisle, made of wooden trusses with an inclination of 12°. Truss consists of hunter cased sloping roof. The second part of building consists of single-layer flat roof. The facade is part of non-ventilated and ventilated by fiber-cement boards CEMBRIT. Windows are plastic DESIGN by VEKRA. Balcony two-doors are plastic VEKRA CLASITIC VD. Entrance two-doors are wooden VEKRA NATURA 68.

The aim of this diploma thesis is the design of the roofing of an ice hockey stadium situated in Žďár nad Sázavou. Plan view dimensions are 55 m x 77 m. The structural height of the roof varies from 10 to 17 m. The roof itself consists of pipe truss girders with a span of 55 m, which are supported by columns on each side. The girders are suspended by a load-carrying arch with a span of 96 m and a camber of 29 m through a system of pre-stressed cables. To determine the internal forces, structural analysis software Scia Engineer was used. Individual elements were then manually designed.

The goal of the submitted thesis is a design and assessment of a steel load-bearing structure of a multipurpose sports hall situated in Prostějov. The floor plan measurements of the object are 38x54 m with the maximum ceiling height of 9,5 m. Final design variant was chosen on the basis of two preliminary drafts, both processed according to standard ČSN EN. The structure is designed with respect to ultimate and serviceability limit states. The construction consists of 10 cross-links spaced by 6,0 m. The spatial rigidity of the structure’s main load-bearing system is provided by spatial elliptic trussed girders, longitudinal and sway bracings. Roof cladding is carried by purlins placed on trusses. Steel columns are designed as a part of gable walls. The project was carried out in Scia Engineer 2014 software. Some particular elements were subsequently assessed by means of manual calculation. The thesis also includes assessment of joints, construction details and drawing documentation.