Today is the implantation of joint replacements, although a radical, but very functional restoration frequent way ill joint. The implants are placed high demands on their biocompatible and long-term function, which is directly related to wear of joint replacements in the human body. Therefore, analysis of the complex behavior of the implant in the human body is a fundamental problem of biomechanics of implants. This issue is dedicated, this dissertation thesis. Dissertation thesis deals with the solution design and development of experimental device for testing the TEP acetabula and wear identification using optical method. The proposed device allows the joint burden hole TEP physiological manner, but by working with the acetabulum burdened by Power resultant joint axis passes through the hole. The physiological loading of articular wells and evaluating the size of the loss of polyethylene is currently intensively addressed. The results of this study may in the near future, serving as information for assessing the conduct of wear prosthetic hip joint in vivo. The work is devoted to solving the problem of the size required to detect the loss of polyethylene for joint replacement arthroplasty: Design and development of experimental equipment for testing the acetabulum of the hip joint arthroplasty. Identify wear using optical methods. Design and development of experimental equipment was made in the system Inventor Professional 2010 at the level of 3D modeling. Great attention was paid to the design fit into the acetabulum TEP testing machines and gripping the acetabulum into an optical device. Management options were tested with combinations of experimental equipment engines. Suggestions were made and then tests for fixing the acetabulum into an optical device. Has the possibility of depth analysis and identification of wear joined with innovative solutions to evaluate the loss of polyethylene acetabulum arthroplasty. Identification of abrasion (loss of polyethylene) joint arthroplasty holes were carried out experimental measurements using an optical holographic interferometry. The comprehensive analysis of the results of experimental measurement of the loss of polyethylene shows that this method can identify both the size but also an area where there is even to small changes in the surface, which depend on the abrasion. One can also say that using this method we are able to affect the will or displacements that affect the size of the loss of polyethylene in joint arthroplasty hole. Despite the number of known and lessons learned arising from the results of solving the problem of design and development of experimental equipment for testing the acetabulum and hip arthroplasty wear identification using optical methods, this work is that the initial study to identify problematics wear of joint replacements. Complete resolution of this issue is beyond the scope of one doctoral thesis.

Externe Fixateure werden häufig für die Stabilisierung und Behandlung schwerer Frakturen genutzt. Schraubenkanalinfektionen können dabei zu Komplikationen, wie Osteomyelitis und Stabilitätsverlusten führen. Es ist unklar, ob Schraubenkanalinfektionen zu Schraubenlockerungen führen, oder aber ob der Stabilitätsverlust von Schrauben in Schraubenkanalinfektionen resultiert. Das Ziel dieser Studie ist es, einen Zusammenhang zwischen der mechanischen Stabilität, dem Auftreten von Infektionen und der osseären Verankerung darzustellen. An 27 Schafen wurde eine standardisierte Osteotomie (3mm weiter Frakturspalt) der rechten Tibia durchgeführt und mit einem monolateralem Fixateur externe stabilisiert. Während der täglichen Pinpflege wurde die Haut um die Schraubeneintrittsstellen begutachtet. Radiologische Verlaufskontrollen erfolgten in wöchentlichen Abständen. Nach 3, 6 und 9 Wochen wurden die Tiere getötet, die Ausdrehmomente der Schrauben gemessen und mikrobiologische Abstriche genommen. Knochenschnitte durch die Schraubenkanäle wurden für histologische, histochemische und histomorphometrische Analysen genommen. In dieser Studie scheint es zu einer Zunahme der Stabilisierung der osseären Verankerung während des Heilungsverlaufes zu kommen. Da die kortikale Knochendichte über die Zeit abnimmt, kann die zunehmend stabilere Verankerung der Schrauben einzig über eine gleichzeitige periostale Kallusdichtezunahme erklärt werden. Die größten Ausdrehmomente des neugebildeten periostalen Kallus wurden zum Sechswochenzeitpunkt gemessen. Danach nimmt die periostale Kallusfläche ab, wohingegen die Kallusdichte zunimmt. Die mikrobiologische Besiedelungsrate (15%) war dreifach höher als die klinisch bestätigten Infektionen. Hingegen war die Osteolyserate (28%) doppelt so hoch wie die mikrobiologisch bestätigte Infektionsrate. Eine Korrelation zwischen Infektion, Osteolyse und Pinlockerung konnte nicht gefunden werden. / External fixators are frequently used for the stabilization and the treatment of problematic fractures. Pin track infections have been shown to cause complications such as osteomyelitis and loss of stability of osteosynthesis. It remains unclear, whether pin track infection provokes pin loosening, or loss of the pin stability results in pin track infections. The aim of this study was to investigate the correlation between the mechanical stability of pins, the incidence of pin track infections and the osseus anchorage of pins. 27 sheep underwent a standardized osteotomy (3 mm gap) of the right tibia. The tibiae were stabilized by a monolateral external fixator. Within the daily pin care routine, the skin around the pin entries was scored. Radiographs were taken at weekly intervals. After 3, 6 and 9 weeks, the animals were sacrificed, the extraction torque of all pins was determined and microbiological analyses were taken. Bone sections through the pintracks were taken for histological, histochemical and histomorphometrical analysis. This study reveals an increasing stability of osseous pinanchorage over the course of healing. As the cortical bone density decreased over time, the increased anchorage-stability of the pins can only be explained by the simultaneous increase of the periosteal callus bone density. The magnitude of the extraction force is determined by the newbuilt periosteal callus, which is at its biggest value at six weeks. Afterwards, the periosteal callus area abates, while the callus bone density accumulates. The microbiologically affirmed infection rate (15%) was three times higher than the one clinical ascertained. In contrast the evidence of osteolysis (28%) was twice as high as the microbiologically diagnosed infection-rate. Despite the low infection rate, evidence of cortical lysis coud not be prevented. No correlation could be found between infection, osteolysis and pin loosening.