The demand for energy is increasing throughout the world, and fossil fuel resources are diminishing. At the same time, the use of fossil fuels is slowly being reduced because it pollutes the environment. Research into alternative energy sources becomes necessary and important. An alternative fuel should not only replace fossil fuels but also address the environmental challenges posed by the use of fossil fuels. Hydrogen is an environmentally friendly substance considering that its product of combustion is water. Hydrogen is perceived to be a major contender to replace fossil fuels. Although hydrogen is not an energy source, it is an energy storage medium and a carrier which can be converted into electrical energy by an electrochemical process such as in fuel cell technology. Current hydrogen production methods, such as steam reforming, derive hydrogen from fossil fuels. As such, these methods still have a negative impact on the environment. Hydrogen can also be produced using thermochemical cycles which avoid the use of fossil fuels. The production of hydrogen through thermochemical cycles is expected to compete with the existing hydrogen production technologies. The sulphur iodine (SI) thermochemical cycle has been identified as a high-efficiency approach to produce hydrogen using either nuclear or solar power. A sound foundation is required to enable future construction and operation of thermochemical cycles. The foundation should consist of laboratory to pilot scale evaluation of the process. The activities involved are experimental verification of reactions, process modelling, conceptual design and pilot plant runs. Based on experimental and pilot plant data presented from previous research, this study presents the simulation of the sulphur iodine thermochemical cycle as applied to the South African context. A conceptual design is presented for the sulphur iodine thermochemical cycle with the aid of a process simulator. The low heating value (LHV) energy efficiency is 18% and an energy efficiency of 24% was achieved. The estimated hydrogen production cost was evaluated at $18/kg. / Thesis (M.Ing. (Chemical Engineering))--North-West University, Potchefstroom Campus, 2012.

The demand for energy is increasing throughout the world, and fossil fuel resources are diminishing. At the same time, the use of fossil fuels is slowly being reduced because it pollutes the environment. Research into alternative energy sources becomes necessary and important. An alternative fuel should not only replace fossil fuels but also address the environmental challenges posed by the use of fossil fuels. Hydrogen is an environmentally friendly substance considering that its product of combustion is water. Hydrogen is perceived to be a major contender to replace fossil fuels. Although hydrogen is not an energy source, it is an energy storage medium and a carrier which can be converted into electrical energy by an electrochemical process such as in fuel cell technology. Current hydrogen production methods, such as steam reforming, derive hydrogen from fossil fuels. As such, these methods still have a negative impact on the environment. Hydrogen can also be produced using thermochemical cycles which avoid the use of fossil fuels. The production of hydrogen through thermochemical cycles is expected to compete with the existing hydrogen production technologies. The sulphur iodine (SI) thermochemical cycle has been identified as a high-efficiency approach to produce hydrogen using either nuclear or solar power. A sound foundation is required to enable future construction and operation of thermochemical cycles. The foundation should consist of laboratory to pilot scale evaluation of the process. The activities involved are experimental verification of reactions, process modelling, conceptual design and pilot plant runs. Based on experimental and pilot plant data presented from previous research, this study presents the simulation of the sulphur iodine thermochemical cycle as applied to the South African context. A conceptual design is presented for the sulphur iodine thermochemical cycle with the aid of a process simulator. The low heating value (LHV) energy efficiency is 18% and an energy efficiency of 24% was achieved. The estimated hydrogen production cost was evaluated at $18/kg. / Thesis (M.Ing. (Chemical Engineering))--North-West University, Potchefstroom Campus, 2012.

The aim of this study is to assess the current situation of energy and carbon flows through the waste sector in Jämtland. An energy flow analysis is performed by balancing the inflows and outflows of the lower heating value and embodied energy. A carbon flow analysis was made on the same principles although with the carbon content and embodied CO2eq.  The results are showing that over a period of one year, 75 000 tons of waste flows through the waste sector in Jämtland. Approximately 60 % of all the waste is incinerated. The energy analysis shows that 970TJ flows through the waste sector every year. Household waste is the category with most energy consumption and emissions in total. However, other materials like metal and electronics have higher energy and carbon content per ton than the household category. The results of the analyses can further be implemented in the Sustainable Jämtland model and it can then be used as a base when making strategies for a sustainable waste treatment.

Tato diplomová práce se zabývá netradičními druhy biomasy využitelnými v České republice a Španělsku a jejich srovnáním. V prvních kapitolách jsou popsány netradiční druhy biomasy, mezinárodní projekty, smlouvy a legislativa. V následujích kapitolách je rozbor netradičních druhů biomasy zejména vznikajících z potravinářského průmyslu každé země s detailním rozborem a srovnáním zbytků z průmyslového zpracování slunečnice a oliv. V závěru je uděláno celkové srovnání těchto druhů biomasy České republiky a Španělska z aspektů výkupních cen, výhřevností, vlhkosti a množství popelovin.