The topic of the thesis is a design of an aicraft for towing of gliders. Based on the background research of the towing aircrafts currently used by the Czech aeroclubs and the analysis of the required characteristics of these aircrafts the design of the new airplane has been created. Moreover, the load of engine mount has been determined according to the CS-VLA directive (a certification guidelines for the Very-light aircrafts). Its construction design as well as strength calculation have been elaborated. The part of the thesis is a 3D model of the aircraft and the engine mount.

This masters thesis concernes with design of formula student frame. Part of masters thesis is to a overview of possible solutions. The main criterion in frame design is final torsional stiffness. Another part of frame design is too solution of suspension attachement to frame. In next part of masters thesis is solved bodywork design and it´s fastening to frame. Final part has few informations about frame manufacturing.

The topic of this thesis is strength check of hydrostatic steering circuit for Zetor Forterra HSX tractor. Next part of the thesis deals with steering column support structure and pedal group console design including FEM analysis, allowing installation of steering columns of different types.

The main aim of this master’s thesis is to design the powertrain of turbocharged threecylinder in-line gasoline engine based on given parameters. The work introduces three variants of balancing of inertia moment of rotating masses and balancer unit of first order moment of inertia of reciprocating parts. The thesis also presents calculation of torsion vibration of the powertrain and structural design of the rubber damper. In conclusion a stress analysis of the crankshaft is submitted with and without torsion vibration damper.

This diploma thesis deals with the proposal of 3D model of single SI engine designated for research purposes. The work is mainly concentrated on the construction of the engine composition that consists of crank case, crankshaft and balance unit. It contains the research of experimental engines and constructions of basic parts of standard SI engines. The aim is the proposal of all-purpose construction of crank case and the following control with the help of FEM system.

This diploma thesis deals with design of uprights and wheel hubs of front wheels of Formula Student race car. Specifically race cars named Dragon 3 and Dragon 4 of TU Brno Racing team. In this thesis there will be load calculations of front wheels, choosing of bearings and uprights and wheel hub’s design. Then control of design by FEA analysis. And finally comparing of both designs and comparing with previous designs.

The Master´s thesis deals with the engineering design of single-axle brakeless dump trailer for a tractor designed for transporting and dumping of particulate materials and firewood. The engineering design of the trailer is based on the proposed kinematic scheme and the basic calculations that are checked by FEM analysis in Ansys Workbench. The drawing documentation is done in AutoCAD.

This diploma thesis is focused on design of adsorber. Rule CSN EN 13 345 is used to calculate of design adsorber. Finite element method (FEM) is used tor stress analysis a categoration of the stress.

This diploma thesis deals with a creation and subsequent analysis of the computational model of the turboprop engine's turbine designed by Prvá Brněnská Strojírna Velká Bíteš. The computational model is created and solved in the finite element model system ANSYS. A cyclic symmetry is taken into account during the solution. The static analysis of the turbine was carried out in objective to quatify prestress effects which are caused by a rotation, higher temperature and an excitation from stator blades. These prestress effects were used in the modal analysis of the turbine. Harmonic analysis were calculated to simulate an operation conditions and a resonance state. The results of these analysis indicate that the higher temperature has the biggest impact on the properties of the turbine. It is also shown, that during the operation of the engine the turbine runs in the mode which is not even close to the resonance state.

This master thesis deals with creation of computational model for stress - strain analysis of front car seat folding mechanism. The calculation has been done using FEM for static and dynamic load case. The results displayed the critical area of mechanism and determined the value of force when the safety of mechanism is not guaranteed and the force when the mechanism failure occurs. According to results from both load cases was made a statement that is necessary to model the dynamic load cases respecting the load time course.