No description available.

Thesis (M.S.)--West Virginia University, 2008. / Title from document title page. Document formatted into pages; contains x, 63 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 62-63).

Thesis (M.S.)--West Virginia University, 2008. / Title from document title page. Document formatted into pages; contains x, 81, 9 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 73-75).

No description available.

The thesis is mainly focused on the investigation of macroscopic and microscopic magnetic properties of selected nanomaterials containing cobalt and iron, and also the capability of our new device, scanning probe microscope Multimode V by Veeco, to directly visualise morphology and magnetic structure of these samples (Magnetic Force Miscroscopy, MFM). Investigated materials, such as CoFe2O4 nanoparticles and SiO2_Co_Si(111) thin films and multilayers are in general promising materials in many fields. In the medicine, the nanoparticles are used as the drug targets or contrast agents whereas in electronics, the (nano)granular thin films are the starting point in fabrication of high density storage media. The macroscopic magnetic properties of our samples are discusses in a view of superparamagnetic phenomena. The interactions in systems of nanoparticles are presented theoretically within the up-to date knowledge and also experimentally by demonstrating the behavior of the strongly-interacting, uper-spin-glass system. The thin films are studied in term of their granular structure and magnetic anisotropy. The morphology and the microscopic domain structure, respectively, are studied with use of the MFM. The first successful results obtained in our lab by this method are presented.

This dissertation is divided into two parts. In the first, the general paradigm of scanned probe microscopy is outlined with a focus on atomic force microscopy and a few of its variations. Magnetic force microscopy is covered in detail as it forms the basis of the second part of this dissertation. The core elements and extra features of the instrument are described with attention paid to the upgrades made by the author. In the second part of this dissertation, background information on perovskite oxides and the inverse spinel system, magnetite, is given. Magnetic force microscopy studies were done on three thin film systems and are detailed. In the first study, ferromagnetic manganite films were subjected to discontinuous changes in strain due to structural transitions in their barium titanate substrates. The resulting effect on the magnetic domains was observed. In the second study, the ferromagnetism of a tensile-strained LaCoO₃ film was studied across temperatures from 4.3 K to 90 K and applied fields up to [mu]₀H=1.1 T. Finally, the properties of antiphase domains in magnetite films of varying film strain due to transition metal buffer layers was probed by imaging the magnetic domains which are pinned to the antiphase boundaries. / text

Imaging of current in internal conductors through magnetic field detection by magnetic force microscopy (MFM) is of growing interest in the analysis of integrated circuits (ICs). This thesis presents a systematic study of the MFM based mapping of current in model circuits by using force and force gradient techniques. In comparing these two techniques, force was found to have a much higher signal to noise ratio (from ~150 to ~580 times) than force gradient at large tip-sample distances considering the presence of thick overlayers in ICs. As a result, force will have better sensitivity and can therefore be used to detect much smaller minimum currents. We have achieved a sensitivity of ~0.64 µA per square-root Hertz in air and ~0.095 µA per squre-root Hertz in vacuum for force with a pinning field with a probe-circuit separation of 1.0 µm. We conclude that the force technique is superior for the application of MFM current imaging of buried conductors, albeit with reduced spatial resolution. Numerical modeling of the MFM images has shown that the simple point probe approximation is insufficient to model MFM images. An extended model, which considers realistic MFM probe geometries and the forces acting on the whole probe, has been shown to be necessary. Qualitative and quantitative comparisons of the experimental and simulation results with this model are in agreement to within experimental uncertainty. The comparisons suggested that the CoCr film thickness is not uniform on the probe, which was verified by scanning electron microscope cross-section images of the probes cut by a focused ion beam. Most notably, the CoCr film was 1.5 times thicker on the cantilever than on the tip. Based on the simulation and experimental results, we have devised a method to accurately locate the current path from MFM images with submicrometer uncertainty. The method was tested for different patterns of model conducting lines. It was shown to be a useful technique for fault location in IC failure analysis when current flows through the devices buried under overlayers and no topographic features are on the surface to provide clues about the positions of the devices. / October 2007

The following dissertation addresses the study of nano-magnetic devices configured to produce logic machines through magnetostatic coupling interactions. The ability for single domain magnets to reliably couple through magnetostatic interactions is essential to the proper functionality of Magnetic Cellular Automata (MCA) devices (p. 36). It was significant to explore how fabrication defects affected the coupling reliability of MCA architectures. Both ferromagnetic and anti-ferromagnetic coupling architectures were found to be robust to common fabrication defects. Experiments also verified the functionality of the previously reported MCA majority gate [1] and a novel implementation of a ferromagnetic MCA majority gate is reported. From these results, the study of clocking Magnetic Cellular Automata (MCA) interconnect architectures was investigated (p. 54). The wire architectures were saturated under distinct directions of an external magnetic field. The experimental results suggested ferromagnetic coupled wires were able to mitigate magnetic frustrations better than anti-ferromagnetic coupled wires. Simulations were also implemented supporting the experimental results. Ferromagnetic wires were found to operate more reliably and will likely be the primary interconnects for MCA. The first design and implementation of a coplanar cross wire system for MCA was constructed which consisted of orthogonal ferromagnetic coupled wires (p. 68). Simulations were implemented of a simple crossing wire junction to analyze micro-magnetic dynamics, data propagation, and associated energy states. Furthermore, two systems were physically realized; the first system consisted of two coplanar crossing wires and the second was a more complex system consisting of over 120 nano-magnetic cells. By demonstrating the combination of all the possible logic states of the first system and the low ground state achieved by the second system, the data suggested coplanar cross wire systems would indeed be a viable architecture in MCA technology. Finally, ongoing research of an unconventional method for image processing using nano-magnetic field-based computation is presented (p. 79). In magnetic field-based computing (MFC), nano-disks were mapped to low level segments of an image, and the magnetostatic coupling of magnetic dipole moments was directly related to the saliency of a low level segment for grouping. A proof of concept model for two MFC systems was implemented. Details such as the importance of fabricating circular nano-magnetic cells to mitigate shape anisotropy, experimental coupling analysis via Magnetic Force Microscopy, and current results from a complex MFC system is outlined.

The high degree of modification through chemical substitution afforded by the perovskite crystal structure and its related counterparts allows a systematic study of structure-property relationships critical to understand the wide variety of exotic phenomena observed in these materials where the spin, charge, orbital, and lattice degrees of freedom are highly correlated. From the multiple phenomena observed in these materials, which includes multiferroicity, catalytic activity, and high temperature superconductivity, this study is concerned with a material that displays colossal magnetoresistance (CMR), La₂₋₂xSr₁₊₂xMn₂O₇; this is a naturally bilayered manganite that exhibits CMR at a paramagnetic to ferromagnetic transition that coincides with an insulator to metal transition. The strong correlation between different degrees of freedom in the material leads to considerable variation in its magnetic properties due to doping even in the small range studied of 0.32 [less than or equal to] x [less than or equal to] 0.4, where the easy axis of magnetization changes from the c-axis to the ab plane. Magnetic force microscopy (MFM) was used for this part of the work, to visualize the local variation of the out of plane (c-axis) magnetization or magnetic microstructure of La₂₋₂xSr₁₊₂xMn₂O₇ for 0.32 [less than or equal to] x [less than or equal to] 0.4 at the exposed ab surface and its evolution due to an applied magnetic field at 4 K. For the x = 0.32 composition, which is close to the out of plane to in plane magnetization transition, a strong preferred magnetization direction within the ab plane or magnetocrystalline anisotropy was observed. The stray magnetic field of the MFM tip perturbs the magnetic microstructure of low coercivity materials like diluted magnetic semiconductors, making it unsuitable for the study of such materials. For this reason, as part of this project a scanning Hall probe microscope (SHPM), a magnetic imaging technique complementary to MFM that uses a Hall sensor that provides a magnetically non-invasive calibrated measurement of the stray fields at the surface of a sample with good resolution (~ 1 [micrometer]), was designed. The construction of a compact cryogenic variable-temperature (77 - 300 K) SHPM, highlighting its features, is described. / text

Magnetic force microscopy studies in varying temperature and applied external magnetic field of magnetic thin films of LaCoO₃ under strain and single crystal UMn₂Ge₂ have been performed. In the case of LaCoO₃ thin films the aim is an understanding of the response of the magnetic microstructure to different signs and degrees of strain and a further attempt to distinguish the effect of defects from strain-induced effects. In UMn₂Ge₂ the magnetic microstructure is imaged for the first time and signatures of a possible phase transition at 150 K and crystalline anisotropy are explored. The first portion of this dissertation focuses on the synthesis methods used to produce the samples investigated and the critical role of synthesis in producing high-quality samples. This is followed by a discussion of characterization techniques used to obtain local and global magnetic and structural characteristics, with particular emphasis on magnetic force microscopy including noise characteristics and a discussion of achieving a high force gradient sensitivity by optimizing the fiber-optic interferometer used for cantilever deflection detection. Design elements and features of the multi-mode variable-temperature atomic force microscope used to obtain magnetic force microscopy images are presented and results for LaCoO₃ and UMn₂Ge₂ are discussed. / text