Spelling suggestions: "subject:"magnetite nanoparticles"" "subject:"magnetites nanoparticles""
1 |
Study of superspin-glass effect and superparamagnetic behavior in magnetite nanoparticles and gold-coated magnetite nanoparticlesFullem, Sharbani I. January 2006 (has links)
Thesis (M.S.)--State University of New York at Binghamton, Department of Physics, 2006. / Includes bibliographical references.
|
2 |
Acid mine drainage sludge dewatering, metal recovery and synthesis of magnetite nanoparticles /Wei, Xinchao. January 1900 (has links)
Thesis (Ph. D.)--West Virginia University, 2005. / Title from document title page. Document formatted into pages; contains x, 111 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references.
|
3 |
Synthesis and Characterization of a Magnetically Responsive Polymeric Drug Delivery SystemYu, Shi, Chow, Gan-Moog 01 1900 (has links)
A magnetic target drug delivery system consisting of biodegradable polymeric microspheres (poly D, L-lactic acid) loaded with magnetite nanoparticles (10-100 nm) and anticancer drug (paclitaxel) was studied. The magnetite nanoparticles were synthesized by chemical precipitation. The as-synthesized magnetite nanoparticles were subsequently introduced into a mixture of polymer magnetic polymeric composite particles were investigated and further correlated with the reaction parameters. It was found that the size and characteristics of the polymeric composite particles depended on the viscosity of the polymer solution. Preliminary drug release experiments showed that the loaded drug was released with the degradation of the polymer. The release rates could be enhanced by an oscillating external magnetic field. / Singapore-MIT Alliance (SMA)
|
4 |
Photocatalytic degradation of organic pollutants using Ag-Fe₃O₄/SiO₂/TiO₂ nanocompositeNoganta, Siyasanga January 2015 (has links)
>Magister Scientiae - MSc / The global lack of clean water for human sanitation and other purposes has become an emerging dilemma for human beings. The presence of organic pollutants in wastewater produced by textile industries, leather manufacturing and chemical industries is an alarming matter for a safe environment and human health. For the last decades, conventional methods have been applied for the purification of water but due to industrialization these methods fall short. Advanced oxidation processes and their reliable application in degradation of many contaminants have been reported as a potential method to reduce and/or alleviate this problem. Lately, it has been assumed that incorporation of some metal nanoparticles such as magnetite nanoparticles as photocatalyst for Fenton reaction could improve the degradation efficiency of contaminants. Core/shell nanoparticles, are extensively studied because of their wide applications in the biomedical, drug delivery, electronics fields and water treatment. The current study is centred on the synthesis of silver-doped Fe₃O₄/SiO₂/TiO₂ photocatalyst. Magnetically separable Fe₃O₄/SiO₂/TiO₂ composite with core–shell structure were synthesized by the deposition of uniform anatase TiO₂ NPs on Fe₃O₄/SiO₂ by using titanium butoxide (TBOT) as titanium source. Then, the silver is doped on TiO₂ layer by hydrothermal method. Integration of magnetic nanoparticles was suggested to avoid the post separation difficulties associated with the powder form of the TiO₂ catalyst, increase of the surface area and adsorption properties. Lastly and most importantly magnetic nanoparticles upsurge the production of hydroxyl groups or reduced charge recombination. The a synthesized catalysts were characterized using Transmission Electron Microscopy, X-ray Diffraction; Infra-red Spectroscopy, Scanning Electron Microscope and Energy Dispersive Spectroscopy. Other characterization techniques includeVibrating Sample Magnetometry, Brunauer Emmett Teller analysis and Thermogravimetric analysis. The average size of the particles size is 72 nm. Furthermore the photocatalytic performances of the magnetic catalysts were assessed in comparison with that commercial titanium dioxide for the degradation of methylene blue using photochemical reactor under ultra violet light. The results showed that the photocatalytic activity was enhanced using Fe₃O₄/SiO₂/TiO₂ and Ag-Fe₃O₄/SiO₂/TiO₂ compared with that for Fe₃O₄, commercial titanium dioxide powder.
|
5 |
Synthesis and Characterization of Novel Nanoparticles for Use as Photocatalytic Probes and RadiotracersPradhan, Anindya 16 May 2008 (has links)
Two novel synthetic routes to formation of gold-magnetite nanoparticles have been designed. Treatment of preformed magnetite nanoparticles with ultrasound in aqueous media with dissolved tetrachloroauric acid resulted in the formation of gold-magnetite nanocomposite materials. The other route involved irradiation of preformed magnetite nanoparticles by UV light in aqueous media with dissolved tetrachloroauric acid. This method resulted in the formation of gold-magnetite nanocomposite materials. These materials maintained the morphology of the original magnetite particles. The morphology of the gold particles could be controlled by adjusting experimental parameters, like addition of small amounts of solvent modifiers such as methanol, diethylene glycol, and oleic acid as well as variation of the concentration of the tetrachloroauric acid solution and time of the reaction. The nanocomposite materials were magnetic and exhibited optical properties similar to gold nanoparticles. Since we were not able to directly synthesize core shell gold magnetite nanoparticles, TiO2 was used as a bridging material. TiO2 nanoparticles with embedded magnetite were suspended in aqueous HAuCl4 and irradiated with ultraviolet light to photodeposit gold. The degree of gold coating and the wavelength of absorbance could be controlled by adjusting concentration of HAuCl4. Absorbance maxima were between 540-590 nm. Particles exhibited superparamagnetic properties (blocking temperature ~170 K) whether or not coated with gold. These particles have potential applications as drug delivery agents, magnetic imaging contrast agents, and magnetically separatable photocatalysts with unique surface properties. Another goal was to synthesize and characterize indium doped magnetite nanoparticles for application as radiotracers for in vivo fate studies. The labeled particles will be useful for determination of pharmacological behavior in biological systems. Indium doped magnetite particles with varying size and surface chemistry were synthesized with wet chemical techniques. The synthesized nanoparticles were characterized in terms of the size and shape with the help of TEM, the elemental composition by ICP and EDS, the crystal structure by XRD and magnetic properties by SQUID measurements. It was found that the indium loading could be controlled even though the magnetic properties were similar to undoped magnetite.
|
6 |
Síntese de nanopartículas magnéticas com elevada magnetização de saturação e estabilidade química / Synthesis of magnetic nanoparticles with high saturation magnetization and chemical stabilityMartinêz, Gustavo Adolfo Lopez 23 July 2013 (has links)
Atualmente, o desenvolvimento de nanopartículas (NPs) magnéticas vem recebendo muito interesse da comunidade científica, devido à versatilidade de aplicações, principalmente em biomedicina como diagnóstico e terapia. Para tais aplicações e desejável que as NPs apresentem comportamento superparamagnético e alta magnetização de saturação (Ms). Neste contexto, existe preferência pela utilização de NPs de óxidos de ferro (maghemita e magnetita), devido à baixa toxicidade destes, quando comparadas com as NPs metálicas. No entanto, esses materiais apresentam baixo valor de Ms, o que pelo menos limita suas aplicações. Assim, no presente trabalho foi estudados diversos métodos de obtenção de NPs magnéticas com alto valores de Ms. Desta forma, neste trabalho foram obtidas nanopartículas de carbeto de ferro com alta magnetização de saturação (Ms ≈ 121 emu g-1) via processo de decomposição térmica e com tamanho em torno de 9 nm. Ainda, na tentativa de se obter NPs de ferro metálico, foram modificados diferentes parâmetros de síntese (temperatura de reação, tempo de reação, surfactantes), ocorrendo na formação de NPs de óxido de ferro na fase magnetita com tamanho em torno de 7,5 nm e comportamento magnético das nanopartículas próximo ao superparamagnético com Ms ≈ 40 emu g-1. Apesar de não ter sido possível verificar a formação de ferro metálico, os materiais obtidos, principalmente o carbeto de ferro, se mostraram promissores para a aplicação em biomedicina. / Magnetic nanoparticles have received great attention, due to their several applications possibilities such as diagnostic and therapy in biomedicine. For these applications are required nanoparticles with superparamagnetic behavior and high saturation magnetization (Ms). In this context, iron oxides (magnetite and maghemite) have been used because of lower toxicity than metallic nanoparticles. However, these materials show lower Ms than metallic magnetic nanoparticles that affect these applications. In this way, we studied several synthetic routes in order to high Ms values. Thereby, we obtained iron carbide nanoparticles with high magnetization (Ms = 121 emu.g-1) and controlled size (around 9 nm) using thermal decomposition process. Furthermore, in order to obtain metallic iron nanoparticles, magnetite nanoparticles were obtained with controlled size around 7,5 nm and superparamagnetic behavior with Ms = 40 emu.g-1. Besides metallic iron nanoparticles have not been obtained, iron carbide nanoparticles showed high magnetization and show promising for biomedical applications.
|
7 |
Estudo eletroquímico de micropartículas individuais e colisões de nanopartículas de magnetita modificadas com azul da Prússia / Electrochemical Study of Individual Microparticles and Collisions of Nanoparticles of Magnetite Modified with Prussian BlueSantos, Germano Pereira dos 05 February 2015 (has links)
De acordo com a literatura recente, a eletroquímica de partículas magnéticas e fenômenos de colisões em superfícies eletródicas resultam em curvas voltamétricas e amperométricas com perfis completamente destoados do convencional. Alguns modelos teóricos propõem explicações, no entanto, ainda se observa a necessidade de aquisição de mais dados experimentais. Visando contribuir com esta área, esta Dissertação de Mestrado aborda a manipulação de micropartículas e nanopartículas de magnetita modificadas com azul da Prússia (Fe3O4-PB), bem como o estudo das propriedades eletroquímicas das partículas na presença de um campo magnético externo. Filmes constituídos por micropartículas sobre eletrodos de carbono (grafite) foram obtidos por duas técnicas distintas, drop coating e magneto-deposição. Para ambos os métodos, os filmes apresentaram dois picos nos voltamogramas, um de oxidação (0,12 V) e outro de redução (-0,05 V), que estão associados ao par redox azul da Prússia/branco da Prússia. Para o filme obtido via drop coating, observaram-se correntes de pico mais elevadas. Também, micropartículas de Fe3O4-PB individuais foram isoladas (single particle) com auxílio de um microscópio óptico e analisadas por voltametria, onde se verificou o aparecimento de picos com os mesmos valores de potenciais. Utilizando os dois estados de comutação de campo (0,2 Tesla), ligado e desligado, foi possível controlar a presença e a ausência da partícula no eletrodo. Também, observaram-se diferenças nos valores de densidade de corrente nos cronoamperogramas para cada micropartícula de Fe3O4-PB e que a morfologia da micropartícula interfere significativamente na resposta eletroquímica. Por fim, e agora se tratando da eletroquímica de nanopartículas de Fe3O4-PB sobre um ultramicroeletrodo (UME) de ouro, controlaram-se as colisões das mesmas em diferentes condições experimentais, como na presença e na ausência de um campo magnético externo paralelo a superfície do eletrodo e com intensidades variadas (0,1 e 0,2 Tesla). Na ausência do campo, as nanopartículas que chegaram ao UME colidiram e se acumularam, gerando sinais eletroquímicos do tipo corrente staircase. Na presença de um campo de 0,1 T, observaram-se vários transientes de correntes (spikes) associados às colisões das nanopartículas, eventos esses não observados frequentemente na presença do campo de 0,2 T. Assim, esses resultados abrem a discussão da necessidade de se aperfeiçoarem os modelos que explicam os perfis das curvas voltamétricas e amperométricas para esses sistemas. / According to recent literature, the electrochemistry of magnetic particles and collision phenomena on surfaces result in unconventional voltammetric and amperometric responses. Some theoretical models has been proposed; however, experimental data are required for improve that. In order to contribute to this research area, this Master\'s Dissertation describes the manipulation of microparticles and nanoparticles of magnetite modified with Prussian blue (Fe3O4-PB), as well as the study of electrochemical properties of them in presence of an external magnetic field. Carbon (graphite) electrodes modified with microparticles were obtained by using two different techniques, (i) magneto-deposition and (ii) drop coating. For both, two peaks in the voltammograms were observed, related to oxidation (0.12 V) and reduction (-0.05 V), which are associated with redox couple Prussian blue / Prussian white. Higher peaks currents were observed for the film obtained via drop coating. Also, individual Fe3O4-PB microparticles (single particles) were isolated by using an optical microscope and analyzed by voltammetry, where there was the appearance of peaks with the same potential values. However, using two commutations magnetic states, \"switch on\" and \"switch off\", it was possible to monitor the presence and the absence of the particle on electrode. Also, there were differences in the values of current density in the chronoamperograms for each Fe3O4-PB microparticle, and the morphology of the microparticle significantly interfered in the electrochemical response. Finally, it was performed several electrochemical experiments regarding to collisions of Fe3O4-PB nanoparticles on a gold ultramicroelectrode. Controlled collisions in different experimental conditions were carried out, such as in the presence and absence of an external magnetic field parallel to the surface electrode, and also with intensities fields of 0.1 and 0.2 Tesla. In the absence of the field, the nanoparticles reached the UME and collided, resulting in electrochemical signals of this type staircase, due to accumulation of them. On the other hand, in the presence of a 0.1 T, we observed several transient currents (spikes) associated with the collisions of the nanoparticles. These events were not observed in the presence of the field of 0.2 T. Thus, these findings allow us to the discussion for improvements on the models for these systems, in order to explain the profiles of voltammetric and amperometric responses.
|
8 |
Preperation And Characterization Of Silica Coated Magnetite Nanoparticles And Labeling With Nonradioactive Re As A Surrogate Of Tc-99m For Magneticly Targeted ImagingZengin, Umit 01 December 2010 (has links) (PDF)
Magnetic nanoparticles have been used in many areas owing to their variable characteristic behaviors. Among these iron oxide nanoparticles are one of the mostly preferred type of nanoparticles. In this study Fe3O4, namely magnetite, which is one type of magnetic iron oxide nanoparticles was used. Magnetite nanoparticles with a narrow size distribution were prepared in aqueous solution using the controlled coprecipitation method. They were characterized by electron microscopic methods (SEM and TEM), crystal structure analysis (XRD), particle size analyzer, vibrating sample magnetometer (VSM) and Raman spectrometry. The nanoparticles were coated with a thin (ca 20 nm) silica shell utilizing the hydrolysis and the polycondensation of tetraethoxysilane (TEOS) under alkaline conditions in ethanol. The presence of silica coating was investigated by energy dispersive X-ray spectrometer (EDX) measurement. After surface modification with an amino silane coupling agent, (3-Aminopropyl)triethoxysilane, histidine was covalently linked to the amine group using glutaraldehyde as cross-linker. Carbonyl complexes of rhenium [Re(CO)3(H2O)3]+ was prepared through reductive carboxylation utilyzing gaseous carbon monoxide as a source of carbonyl and amine borane (BH3NH3) as
the reducing agent. The complex formation was followed by HPLC- ICP-MS system and 95% conversion of perrhanete into the complex was achieved. The magnetic nanoparticles were then labeled with the Re complex with a yield of 86.8% through the replacement of labile H2O groups with imidazolyl groups. Thus prepared particles were showed good stability in vitro. Herein rhenium was selected as a surrogate of radioactive 99mTc. However radioactive isotopes of rhenium (186-Re and 188 Re) is also used for radioactive therapy.
|
9 |
Preparation And Characterization Of Magnetite Nanoparticles By Thermal Decomposition Method For Their Potential Use In Tumor ImagingTatlici, Zehra 01 December 2010 (has links) (PDF)
In biomedical applications, magnetic nanoparticles have been used as they offer attractive possibilities. First, they have controllable sizes ranging from a few nanometers up to tens of nanometers and second, the nanoparticles are magnetic and magnetic fields can penetrate into human tissue which means that they can be manipulated by an external magnetic field gradient. In this study, Fe
|
10 |
Estudo eletroquímico de micropartículas individuais e colisões de nanopartículas de magnetita modificadas com azul da Prússia / Electrochemical Study of Individual Microparticles and Collisions of Nanoparticles of Magnetite Modified with Prussian BlueGermano Pereira dos Santos 05 February 2015 (has links)
De acordo com a literatura recente, a eletroquímica de partículas magnéticas e fenômenos de colisões em superfícies eletródicas resultam em curvas voltamétricas e amperométricas com perfis completamente destoados do convencional. Alguns modelos teóricos propõem explicações, no entanto, ainda se observa a necessidade de aquisição de mais dados experimentais. Visando contribuir com esta área, esta Dissertação de Mestrado aborda a manipulação de micropartículas e nanopartículas de magnetita modificadas com azul da Prússia (Fe3O4-PB), bem como o estudo das propriedades eletroquímicas das partículas na presença de um campo magnético externo. Filmes constituídos por micropartículas sobre eletrodos de carbono (grafite) foram obtidos por duas técnicas distintas, drop coating e magneto-deposição. Para ambos os métodos, os filmes apresentaram dois picos nos voltamogramas, um de oxidação (0,12 V) e outro de redução (-0,05 V), que estão associados ao par redox azul da Prússia/branco da Prússia. Para o filme obtido via drop coating, observaram-se correntes de pico mais elevadas. Também, micropartículas de Fe3O4-PB individuais foram isoladas (single particle) com auxílio de um microscópio óptico e analisadas por voltametria, onde se verificou o aparecimento de picos com os mesmos valores de potenciais. Utilizando os dois estados de comutação de campo (0,2 Tesla), ligado e desligado, foi possível controlar a presença e a ausência da partícula no eletrodo. Também, observaram-se diferenças nos valores de densidade de corrente nos cronoamperogramas para cada micropartícula de Fe3O4-PB e que a morfologia da micropartícula interfere significativamente na resposta eletroquímica. Por fim, e agora se tratando da eletroquímica de nanopartículas de Fe3O4-PB sobre um ultramicroeletrodo (UME) de ouro, controlaram-se as colisões das mesmas em diferentes condições experimentais, como na presença e na ausência de um campo magnético externo paralelo a superfície do eletrodo e com intensidades variadas (0,1 e 0,2 Tesla). Na ausência do campo, as nanopartículas que chegaram ao UME colidiram e se acumularam, gerando sinais eletroquímicos do tipo corrente staircase. Na presença de um campo de 0,1 T, observaram-se vários transientes de correntes (spikes) associados às colisões das nanopartículas, eventos esses não observados frequentemente na presença do campo de 0,2 T. Assim, esses resultados abrem a discussão da necessidade de se aperfeiçoarem os modelos que explicam os perfis das curvas voltamétricas e amperométricas para esses sistemas. / According to recent literature, the electrochemistry of magnetic particles and collision phenomena on surfaces result in unconventional voltammetric and amperometric responses. Some theoretical models has been proposed; however, experimental data are required for improve that. In order to contribute to this research area, this Master\'s Dissertation describes the manipulation of microparticles and nanoparticles of magnetite modified with Prussian blue (Fe3O4-PB), as well as the study of electrochemical properties of them in presence of an external magnetic field. Carbon (graphite) electrodes modified with microparticles were obtained by using two different techniques, (i) magneto-deposition and (ii) drop coating. For both, two peaks in the voltammograms were observed, related to oxidation (0.12 V) and reduction (-0.05 V), which are associated with redox couple Prussian blue / Prussian white. Higher peaks currents were observed for the film obtained via drop coating. Also, individual Fe3O4-PB microparticles (single particles) were isolated by using an optical microscope and analyzed by voltammetry, where there was the appearance of peaks with the same potential values. However, using two commutations magnetic states, \"switch on\" and \"switch off\", it was possible to monitor the presence and the absence of the particle on electrode. Also, there were differences in the values of current density in the chronoamperograms for each Fe3O4-PB microparticle, and the morphology of the microparticle significantly interfered in the electrochemical response. Finally, it was performed several electrochemical experiments regarding to collisions of Fe3O4-PB nanoparticles on a gold ultramicroelectrode. Controlled collisions in different experimental conditions were carried out, such as in the presence and absence of an external magnetic field parallel to the surface electrode, and also with intensities fields of 0.1 and 0.2 Tesla. In the absence of the field, the nanoparticles reached the UME and collided, resulting in electrochemical signals of this type staircase, due to accumulation of them. On the other hand, in the presence of a 0.1 T, we observed several transient currents (spikes) associated with the collisions of the nanoparticles. These events were not observed in the presence of the field of 0.2 T. Thus, these findings allow us to the discussion for improvements on the models for these systems, in order to explain the profiles of voltammetric and amperometric responses.
|
Page generated in 0.0645 seconds