1 |
Síntese de nanopartículas magnéticas com elevada magnetização de saturação e estabilidade química / Synthesis of magnetic nanoparticles with high saturation magnetization and chemical stabilityMartinêz, Gustavo Adolfo Lopez 23 July 2013 (has links)
Atualmente, o desenvolvimento de nanopartículas (NPs) magnéticas vem recebendo muito interesse da comunidade científica, devido à versatilidade de aplicações, principalmente em biomedicina como diagnóstico e terapia. Para tais aplicações e desejável que as NPs apresentem comportamento superparamagnético e alta magnetização de saturação (Ms). Neste contexto, existe preferência pela utilização de NPs de óxidos de ferro (maghemita e magnetita), devido à baixa toxicidade destes, quando comparadas com as NPs metálicas. No entanto, esses materiais apresentam baixo valor de Ms, o que pelo menos limita suas aplicações. Assim, no presente trabalho foi estudados diversos métodos de obtenção de NPs magnéticas com alto valores de Ms. Desta forma, neste trabalho foram obtidas nanopartículas de carbeto de ferro com alta magnetização de saturação (Ms ≈ 121 emu g-1) via processo de decomposição térmica e com tamanho em torno de 9 nm. Ainda, na tentativa de se obter NPs de ferro metálico, foram modificados diferentes parâmetros de síntese (temperatura de reação, tempo de reação, surfactantes), ocorrendo na formação de NPs de óxido de ferro na fase magnetita com tamanho em torno de 7,5 nm e comportamento magnético das nanopartículas próximo ao superparamagnético com Ms ≈ 40 emu g-1. Apesar de não ter sido possível verificar a formação de ferro metálico, os materiais obtidos, principalmente o carbeto de ferro, se mostraram promissores para a aplicação em biomedicina. / Magnetic nanoparticles have received great attention, due to their several applications possibilities such as diagnostic and therapy in biomedicine. For these applications are required nanoparticles with superparamagnetic behavior and high saturation magnetization (Ms). In this context, iron oxides (magnetite and maghemite) have been used because of lower toxicity than metallic nanoparticles. However, these materials show lower Ms than metallic magnetic nanoparticles that affect these applications. In this way, we studied several synthetic routes in order to high Ms values. Thereby, we obtained iron carbide nanoparticles with high magnetization (Ms = 121 emu.g-1) and controlled size (around 9 nm) using thermal decomposition process. Furthermore, in order to obtain metallic iron nanoparticles, magnetite nanoparticles were obtained with controlled size around 7,5 nm and superparamagnetic behavior with Ms = 40 emu.g-1. Besides metallic iron nanoparticles have not been obtained, iron carbide nanoparticles showed high magnetization and show promising for biomedical applications.
|
2 |
Síntese de nanopartículas magnéticas com elevada magnetização de saturação e estabilidade química / Synthesis of magnetic nanoparticles with high saturation magnetization and chemical stabilityGustavo Adolfo Lopez Martinêz 23 July 2013 (has links)
Atualmente, o desenvolvimento de nanopartículas (NPs) magnéticas vem recebendo muito interesse da comunidade científica, devido à versatilidade de aplicações, principalmente em biomedicina como diagnóstico e terapia. Para tais aplicações e desejável que as NPs apresentem comportamento superparamagnético e alta magnetização de saturação (Ms). Neste contexto, existe preferência pela utilização de NPs de óxidos de ferro (maghemita e magnetita), devido à baixa toxicidade destes, quando comparadas com as NPs metálicas. No entanto, esses materiais apresentam baixo valor de Ms, o que pelo menos limita suas aplicações. Assim, no presente trabalho foi estudados diversos métodos de obtenção de NPs magnéticas com alto valores de Ms. Desta forma, neste trabalho foram obtidas nanopartículas de carbeto de ferro com alta magnetização de saturação (Ms ≈ 121 emu g-1) via processo de decomposição térmica e com tamanho em torno de 9 nm. Ainda, na tentativa de se obter NPs de ferro metálico, foram modificados diferentes parâmetros de síntese (temperatura de reação, tempo de reação, surfactantes), ocorrendo na formação de NPs de óxido de ferro na fase magnetita com tamanho em torno de 7,5 nm e comportamento magnético das nanopartículas próximo ao superparamagnético com Ms ≈ 40 emu g-1. Apesar de não ter sido possível verificar a formação de ferro metálico, os materiais obtidos, principalmente o carbeto de ferro, se mostraram promissores para a aplicação em biomedicina. / Magnetic nanoparticles have received great attention, due to their several applications possibilities such as diagnostic and therapy in biomedicine. For these applications are required nanoparticles with superparamagnetic behavior and high saturation magnetization (Ms). In this context, iron oxides (magnetite and maghemite) have been used because of lower toxicity than metallic nanoparticles. However, these materials show lower Ms than metallic magnetic nanoparticles that affect these applications. In this way, we studied several synthetic routes in order to high Ms values. Thereby, we obtained iron carbide nanoparticles with high magnetization (Ms = 121 emu.g-1) and controlled size (around 9 nm) using thermal decomposition process. Furthermore, in order to obtain metallic iron nanoparticles, magnetite nanoparticles were obtained with controlled size around 7,5 nm and superparamagnetic behavior with Ms = 40 emu.g-1. Besides metallic iron nanoparticles have not been obtained, iron carbide nanoparticles showed high magnetization and show promising for biomedical applications.
|
3 |
Structural and Magnetic Properties of Additively Manufactured Hiperco (FeCo-2V)O'Donnell, Aidan James 12 1900 (has links)
The FeCo-V alloy, commercially referred to as Hiperco, is known for its great soft magnetic properties. However, the high cost of production has limited the usage of this alloy to small-scale applications, where the small volume and high magnetic performance are critical. Additive manufacturing (AM) has the potential to solve the production problems that exist in Hiperco manufacturing. The present research has focused on selective laser melting (SLM) based AM processing of Hiperco. The goal was to perform a detailed examination of SLM processed Hiperco and determine how the process parameters affect the microstructure, mechanical and magnetic properties. While a systematic set of SLM process parameters were employed, the results indicate that the energy density was quite similar for this set of process parameters, resulting in similar properties. Overall, the saturation magnetization (Ms) values were very good, but the coercivity (Hc) values were very high, in the case of all as SLM processed conditions. Additionally, a large variation in porosity was observed in the as SLM processed samples, as a function of process parameters. Interestingly, long-term heat-treatments of these samples in an Ar+H2 atmosphere resulted in substantial decreases in the Hc values. These results are presented and discussed.
|
4 |
A STUDY OF SURFACE ACOUSTIC WAVE AND SPIN PRECESSION USING AN ULTRAFAST LASER FOR LOCALIZED ELASTIC AND MAGNETIC PROPERTY MEASUREMENTZhao, Peng 27 August 2013 (has links)
No description available.
|
5 |
Magnetic Properties of Electrodeposited Nanocrystalline Ni-Fe alloysWang, Minghe 04 1900 (has links)
<p>Ni-Fe alloys have been used in industrial applications over the past century due to their unique mechanical and magnetic properties. Currently, researchers are interested in enhancing the performance of Ni-Fe alloys by modifying their microstructure. An example of this would be the use of ultra-fine nanocrystalline Ni-Fe alloys for magnetic shielding products that are uniquely shaped and cost effective. These nanocrystalline materials usually exhibit good soft magnetic properties, such as high saturation magnetization, low coercivity and good magnetic permeability. The following study has been devoted to the magnetic properties of electrodeposited nanocrystalline Ni-Fe alloys.</p> <p>The structure and texture of electrodeposited Ni-Fe alloys was studied by two-dimensional XRD. The Ni-Fe alloys with Fe content from 24.9at. % to 54.2at. % were comprised exclusively of the FCC phase. For 60.2at. % Fe sample, a mixed phase of BCC and FCC structure was found. The lattice parameter increased with increasing Fe content until 54.2at. %, and then decreased due to the presence of BCC structure. The increase in lattice parameter was attributed to the iron replacement of nickel in the Ni crystalline lattice. Texture analysis shows that all Ni-Fe alloys with different Fe content exhibit the fiber texture with a major component of theaxis aligned perpendicular to the sample plane. A second component iswith a significantly lower volume fraction. It also shows that the Ni-Fe alloy with 44.2at. % Fe exhibits the highest volume fraction of random orientation.</p> <p>Magnetic measurements showed that all Ni-Fe nanocrystalline alloys exhibit soft magnetic properties with narrow hysteresis loops. The saturation magnetization increased linearly with increasing Fe content. The magnetization at T = 2K were slightly higher than that at T = 298K. The lowest coercivity~6Oe was obtained at 44.2 at. % Fe content.</p> <p>Good agreement between Random Anisotropy Model (RAM) theory and experimental data for all the Ni-Fe alloys has been obtained. By fitting the high field magnetization curve with the Law of Approach to Saturation (LATS), the magnetocrystalline anisotropy constant (K<sub>eff</sub>) were obtained. K<sub>eff</sub> decreased with increasing temperature. Also, the ferromagnetic exchange lengths for each Ni-Fe alloy were calculated. They are 26nm, 21nm, 19nm, 18nm, 17nm for Ni-24.9at.%Fe, Ni-33.1at.%Fe, Ni-44.2at.%Fe, Ni-54.2at.%Fe, Ni-60.2at.%Fe at room temperature, respectively. The exchange lengths are larger than the average grain size (D) for all of the samples. The results confirmed the feasibility of Random Anisotropy Model for the prediction of the magnetic properties of the nanocrystalline Ni-Fe alloys fabricated by electrodeposition.</p> / Master of Applied Science (MASc)
|
6 |
Cobalt Nanoparticle-Macromolecular Complexes and Their Conversion to Oxidatively Stable EntitiesBaranauskas, Victor Vincent 29 April 2005 (has links)
The goal of the research presented in this dissertation was to synthesize novel macromolecular materials that would afford oxidative stability to magnetic cobalt nanoparticles under ambient conditions. The cobalt nanoparticles were formed via the thermolysis of Co2(CO)8 in concentrated solutions of toluene containing the macromolecular dispersion stabilizers. The copolymers were designed to encapsulate the nanoparticles with a number of thin protective coatings to prevent their undesirable oxidation under ambient condtions. Cobalt nanoparticles encased with an organic glass were synthesized by stabilizing cobalt nanoparticles with poly(methyl methacrylate-co-2-vinylpyridine-g-dimethylsiloxane) whereas nanoparticles encapsulated with triazine networks were formed via the thermal treatment of cobalt particles complexed with poly(styrene-b-4-vinylphenylcyanate). Cobalt nanoparticles coated with a combination of carbonaceous and silica char were obtained by pyrolyzing cobalt particles stabilized with poly (4-vinylphenoxyphthalonitrile-co-4-vinylphenoxytriethoxysilane-g-dimethylsiloxane) graft copolymers. Moreover, cobalt nanoparticles encapsulated with either phthalonitrile networks or graphitic char were prepared via the thermal treatment of nanoparticles stabilized with poly(styrene-b-4-vinylphenoxyphthalonitrile).
Oxidatively-stable, magnetic cobalt nanoparticle complexes may be prepared by heating cobalt nanoparticles encapsulated in poly(styrene-b-4-vinylphenoxyphthalonitrile) block copolymers at elevated temperatures. The block copolymers were synthesized through the sequential anionic polymerization of styrene and tert-butyldimethylsilyloxystyrene. The silyl ether protecting groups on the second block were hydrolyzed under acidic conditions to afford poly(styrene-b-4-vinylphenol), and the pendent phenols of the diblock copolymer were chemically modified with 4-nitrophthalonitrile to afford poly(styrene-b-4-vinylphenoxyphthalonitrile). Stable suspensions of ~8-10 nm diameter cobalt metal nanoparticles were formed by thermolysis of dicobalt octacarbonyl in solutions of toluene containing poly(styrene-b-4-vinylphenoxyphthalonitrile). The cobalt-polymer nanoparticle complexes were pyrolyzed under argon to afford highly magnetic cobalt nanoparticles encased in graphitic coatings. Magnetic susceptibility measurements indicate that the cobalt-graphitic particles are oxidatively-stable and retain their high saturation magnetizations (~ 95-100 emu g-1) for at least a year under ambient conditions. / Ph. D.
|
7 |
Síntese e caracterização de nanomateriais superparamagnéticos do tipo core-shell para aplicação em catálise e biomedicina / Synthesis and characterization of core-shell superparamagnetic nanomaterials for biomedical and catalytic applicationsBeck Júnior, Watson 31 March 2016 (has links)
As diversas aplicações tecnológicas de nanopartículas magnéticas (NPM) vêm intensificando o interesse por materiais com propriedades magnéticas diferenciadas, como magnetização de saturação (MS) intensificada e comportamento superparamagnético. Embora MNP metálicas de Fe, Co e bimetálicas de FeCo e FePt possuam altos valores de MS, sua baixa estabilidade química dificulta aplicações em escala nanométrica. Neste trabalho foram sintetizadas NPM de Fe, Co, FeCo e FePt com alta estabilidade química e rigoroso controle morfológico. NPM de óxido metálicos (Fe e Co) também foram obtidas. Dois métodos de síntese foram empregados. Usando método baseado em sistemas nanoheterogêneos (sistemas micelares ou de microemulsão inversa), foram sintetizadas NPM de Fe3O4 e Co metálico. Foram empregados surfactantes cátion-substituídos: dodecil sulfato de ferro(III) (FeDS) e dodecil sulfato de cobalto(II) (CoDS). Para a síntese das NPM, foram estudados e determinados a concentração micelar crítica do FeDS em 1-octanol (cmc = 0,90 mmol L-1) e o diagrama de fases pseudoternário para o sistema n-heptano/CoDS/n-butanol/H2O. NPM esferoidais de magnetita com3,4 nm de diâmetro e comportamento quase-paramagnético foram obtidas usando sistemas micelares de FeDS em 1-octanol. Já as NPM de Co obtidas via microemulsão inversa, apesar da larga distribuição de tamanho e baixa MS, são quimicamente estáveis e superparamagnéticas. O segundo método é baseado na decomposição térmica de complexos metálicos, pelo qual foram preparadas NPM esféricas de FePt e de óxidos metálicos (Fe3O4, FeXO1-X, (Co,Fe)XO1-X e CoFe2O4) com morfologia controlada e estabilidade química. O método não mostrou a mesma efetividade na síntese de NPM de FeAg e FeCo: a liga FeAg não foi obtida enquanto que NPM de FeCo com estabilidade química foram obtidas sem controle morfológico. NPM de Fe e FeCo foram preparadas a partir da redução térmica de NPM de Fe3O4 e CoFe2O4, as quais foram previamente recobertas com sílica. A sílica previne a sinterização inter-partículas, além de proporcionar caráter hidrofílico e biocompatibilidade ao material. As amostras reduzidas apresentaram aumento dos valores de MS (entre 21,3 e 163,9%), o qual é diretamente proporcional às dimensões das NPM. O recobrimento com sílica foi realizado via hidrólise de tetraetilortosilicato (TEOS) em sistema de microemulsão inversa. A espessura da camada de sílica foi controlada variando-se o tempo de reação e as concentrações de TEOS e de NPM, sendo então proposto um mecanismo do processo de recobrimento. Algumas amostras receberam um recobrimento adicional de TiO2 na fase anatase, para o qual foi empregado etilenoglicol como solvente e ligante para formação de glicolato de Ti como precursor. A espessura da camada de TiO2 (2-12 nm) é controlada variando as quantidades relativas entre NPM e o precursor de Ti. Ensaios de hipertermia magnética foram realizados para as amostras recobertas com sílica. Ensaios de hipertermia magnéticas mostram grande aumento da taxa de aquecimento das amostras após a redução térmica, mesmo para dispersões diluídas de NPM (0,6 a 4,5 mg mL-1). Taxas de aquecimento entre 0,3 e 3,0oC min-1 e SAR entre 37,2 e 96,3 W g-1. foram obtidos. A atividade fotocatalítica das amostras recobertas foram próximas à da fase anatase pura, com a vantagem de possuir um núcleo magnético que permite a recuperação do catalisador pela simples aplicação de campos magnéticos externos. Os resultados preliminares dos ensaios de hipertermia magnética e fotocatálise indicam um forte potencial dos materiais aqui relatados para aplicações em biomedicina e em fotocatálise. / The most diverse technological applications of magnetic nanoparticles (MNP) have intensifiedthe interest for materials with different magnetic properties such as enhanced saturationmagnetization (MS) and superparamagnetic behavior. Despite the high MS values of metalparticles of Fe, Co, FeCo and FePt, their low chemical stability hinders most applications at thenanoscale. This thesis reports the synthesis of metallic Fe and Co and bimetallic FeCo and FePtMNP with high chemical stability and strict morphological control. MNP of iron oxide and mixediron-cobalt oxide were also synthesized. Two methods were employed. The first method, basedon nanoheterogeneous systems (micellar or reverse microemulsion systems), was used toprepare magnetite and metallic Co NPM. The method applies cation-substituted surfactants:iron(III) dodecyl sulfate iron (FeDS) and cobalt(II) dodecyl sulfate (CoDS). Before the MNPsyntheses, it were studied e determined the critical micelle concentration of FeDS in 1-octanol(cmc = 0.90 mmol L-1) and the pseudo-ternary phase diagram of n-heptane/CoDS/nbutanol/H2O. Spheroidal MNP of magnetite with 3.4 nm in diameter and quasi-paramagneticbehavior were prepared in octanolic FeDS micellar systems. Despite their broad sizedistribution and low MS, metallic Co MNP were produced in reverse microemulsions withchemical stability and superparamagnetic behavior. The second synthesis method, based onthermal decomposition of metal complexes, was employed to prepare spherical FePt and metaloxides (Fe3O4, FeXO1-X, (Co, Fe)XO1-X and CoFe2O4) MNP. Strict morphological control and highchemical stability were reached. Such method does not show the same effectiveness tosynthesize FeAg and FeCo MNP: the FeAg bimetallic alloy was not obtained while FeCo MNPwith chemical stability and compositional control were prepared with no morphological control.Fe and FeCo MNP were produced by thermal reduction of silica-coated Fe3O4 and CoFe2O4 MPN. The coating, beyond to prevent inter-particle sintering, provides biocompatibility andhydrophilic character. The reduced samples showed a significant increase in MS values(between 21.3 and 163.9%), which is directly proportional to MNP size. The silica coating wasaccomplished by tetraethylorthosilicate (TEOS) hydrolysis in reverse microemulsions. Thethickness of the silica layer is controlled by varying the reaction time and concentration of TEOSand NPM. The observations during coating process allowed to propose its probable mechanism.An additional coating of TiO2 (anatase phase) was performed onto silica layer for somesamples. Anatase coating was achieved by using ethylene glycol as both solvent and ligand toproduce an intermediate complex Ti precursor. The variation of the relative amounts of NPMand the Ti precursor allows to control the thickness of the anatase layer between 2 and 12 nm. Assays of magnetic hyperthermia were performed for silica-coated samples. The heating rate of the reduced samples increases after thermal reduction, even for dilute MNP dispersions (0.6 to4.5 mg mL-1). Heating rates between 0.3 and 3.0o C min-1 and SAR in the range of 37.2 96.3 Wg-1 were obtained. The photocatalytic activities of pure anatase particles and TiO2 -coated MNPwere close, but the magnetic samples has the advantage of being recovered from reactionmedia by applying the external magnetic fields. The preliminary results of magnetichyperthermia and photocatalysis assays indicate such materials have strong potential forapplications in biomedicine and photocatalysis.
|
8 |
Ageing tests of cemented carbide powders : An investigation for increased quality of metal cutting inserts / Åldringstester av hårdmetallpulverRösth, Eric January 2018 (has links)
In this study, the ageing effects on powder used for cemented carbide insert production are examined. Ageing is throughout this study, defined as the time dependent change of the magnetic properties: coercive field strength and saturation magnetization. Testing is done using eight different powder compositions stored in both air and in an argon cabinet for 10 weeks, where sampling is done at specific intervals. Samples are stored in vacuum sealed bags for a combined sintering at the last phase of the test. Magnetic properties are assumed to be dependent on the amount of oxides needed to be reduced by taking carbon from the material itself during the vacuum stage of the sintering. To achieve interpretive results, this study also tested available sintering furnaces (DMK and DEK) by sintering trays with patterns of test pieces. This shows that DEK furnaces are much better for the ageing tests performed in this study, since less variation of the magnetic properties are measured because of the symmetrical heat gradient over each tray. Ageing tests strongly suggest that the cause of ageing comes from water absorbed by the PEG in the powder composition. Changing the molecular weight of the PEG seems to have an effect on the powder's ageing sensitivity. Measurements performed in this study show less ageing for Cr-rich DA-powders than for cubic carbide rich DQ-powders.
|
9 |
Síntese e caracterização de nanomateriais superparamagnéticos do tipo core-shell para aplicação em catálise e biomedicina / Synthesis and characterization of core-shell superparamagnetic nanomaterials for biomedical and catalytic applicationsWatson Beck Júnior 31 March 2016 (has links)
As diversas aplicações tecnológicas de nanopartículas magnéticas (NPM) vêm intensificando o interesse por materiais com propriedades magnéticas diferenciadas, como magnetização de saturação (MS) intensificada e comportamento superparamagnético. Embora MNP metálicas de Fe, Co e bimetálicas de FeCo e FePt possuam altos valores de MS, sua baixa estabilidade química dificulta aplicações em escala nanométrica. Neste trabalho foram sintetizadas NPM de Fe, Co, FeCo e FePt com alta estabilidade química e rigoroso controle morfológico. NPM de óxido metálicos (Fe e Co) também foram obtidas. Dois métodos de síntese foram empregados. Usando método baseado em sistemas nanoheterogêneos (sistemas micelares ou de microemulsão inversa), foram sintetizadas NPM de Fe3O4 e Co metálico. Foram empregados surfactantes cátion-substituídos: dodecil sulfato de ferro(III) (FeDS) e dodecil sulfato de cobalto(II) (CoDS). Para a síntese das NPM, foram estudados e determinados a concentração micelar crítica do FeDS em 1-octanol (cmc = 0,90 mmol L-1) e o diagrama de fases pseudoternário para o sistema n-heptano/CoDS/n-butanol/H2O. NPM esferoidais de magnetita com3,4 nm de diâmetro e comportamento quase-paramagnético foram obtidas usando sistemas micelares de FeDS em 1-octanol. Já as NPM de Co obtidas via microemulsão inversa, apesar da larga distribuição de tamanho e baixa MS, são quimicamente estáveis e superparamagnéticas. O segundo método é baseado na decomposição térmica de complexos metálicos, pelo qual foram preparadas NPM esféricas de FePt e de óxidos metálicos (Fe3O4, FeXO1-X, (Co,Fe)XO1-X e CoFe2O4) com morfologia controlada e estabilidade química. O método não mostrou a mesma efetividade na síntese de NPM de FeAg e FeCo: a liga FeAg não foi obtida enquanto que NPM de FeCo com estabilidade química foram obtidas sem controle morfológico. NPM de Fe e FeCo foram preparadas a partir da redução térmica de NPM de Fe3O4 e CoFe2O4, as quais foram previamente recobertas com sílica. A sílica previne a sinterização inter-partículas, além de proporcionar caráter hidrofílico e biocompatibilidade ao material. As amostras reduzidas apresentaram aumento dos valores de MS (entre 21,3 e 163,9%), o qual é diretamente proporcional às dimensões das NPM. O recobrimento com sílica foi realizado via hidrólise de tetraetilortosilicato (TEOS) em sistema de microemulsão inversa. A espessura da camada de sílica foi controlada variando-se o tempo de reação e as concentrações de TEOS e de NPM, sendo então proposto um mecanismo do processo de recobrimento. Algumas amostras receberam um recobrimento adicional de TiO2 na fase anatase, para o qual foi empregado etilenoglicol como solvente e ligante para formação de glicolato de Ti como precursor. A espessura da camada de TiO2 (2-12 nm) é controlada variando as quantidades relativas entre NPM e o precursor de Ti. Ensaios de hipertermia magnética foram realizados para as amostras recobertas com sílica. Ensaios de hipertermia magnéticas mostram grande aumento da taxa de aquecimento das amostras após a redução térmica, mesmo para dispersões diluídas de NPM (0,6 a 4,5 mg mL-1). Taxas de aquecimento entre 0,3 e 3,0oC min-1 e SAR entre 37,2 e 96,3 W g-1. foram obtidos. A atividade fotocatalítica das amostras recobertas foram próximas à da fase anatase pura, com a vantagem de possuir um núcleo magnético que permite a recuperação do catalisador pela simples aplicação de campos magnéticos externos. Os resultados preliminares dos ensaios de hipertermia magnética e fotocatálise indicam um forte potencial dos materiais aqui relatados para aplicações em biomedicina e em fotocatálise. / The most diverse technological applications of magnetic nanoparticles (MNP) have intensifiedthe interest for materials with different magnetic properties such as enhanced saturationmagnetization (MS) and superparamagnetic behavior. Despite the high MS values of metalparticles of Fe, Co, FeCo and FePt, their low chemical stability hinders most applications at thenanoscale. This thesis reports the synthesis of metallic Fe and Co and bimetallic FeCo and FePtMNP with high chemical stability and strict morphological control. MNP of iron oxide and mixediron-cobalt oxide were also synthesized. Two methods were employed. The first method, basedon nanoheterogeneous systems (micellar or reverse microemulsion systems), was used toprepare magnetite and metallic Co NPM. The method applies cation-substituted surfactants:iron(III) dodecyl sulfate iron (FeDS) and cobalt(II) dodecyl sulfate (CoDS). Before the MNPsyntheses, it were studied e determined the critical micelle concentration of FeDS in 1-octanol(cmc = 0.90 mmol L-1) and the pseudo-ternary phase diagram of n-heptane/CoDS/nbutanol/H2O. Spheroidal MNP of magnetite with 3.4 nm in diameter and quasi-paramagneticbehavior were prepared in octanolic FeDS micellar systems. Despite their broad sizedistribution and low MS, metallic Co MNP were produced in reverse microemulsions withchemical stability and superparamagnetic behavior. The second synthesis method, based onthermal decomposition of metal complexes, was employed to prepare spherical FePt and metaloxides (Fe3O4, FeXO1-X, (Co, Fe)XO1-X and CoFe2O4) MNP. Strict morphological control and highchemical stability were reached. Such method does not show the same effectiveness tosynthesize FeAg and FeCo MNP: the FeAg bimetallic alloy was not obtained while FeCo MNPwith chemical stability and compositional control were prepared with no morphological control.Fe and FeCo MNP were produced by thermal reduction of silica-coated Fe3O4 and CoFe2O4 MPN. The coating, beyond to prevent inter-particle sintering, provides biocompatibility andhydrophilic character. The reduced samples showed a significant increase in MS values(between 21.3 and 163.9%), which is directly proportional to MNP size. The silica coating wasaccomplished by tetraethylorthosilicate (TEOS) hydrolysis in reverse microemulsions. Thethickness of the silica layer is controlled by varying the reaction time and concentration of TEOSand NPM. The observations during coating process allowed to propose its probable mechanism.An additional coating of TiO2 (anatase phase) was performed onto silica layer for somesamples. Anatase coating was achieved by using ethylene glycol as both solvent and ligand toproduce an intermediate complex Ti precursor. The variation of the relative amounts of NPMand the Ti precursor allows to control the thickness of the anatase layer between 2 and 12 nm. Assays of magnetic hyperthermia were performed for silica-coated samples. The heating rate of the reduced samples increases after thermal reduction, even for dilute MNP dispersions (0.6 to4.5 mg mL-1). Heating rates between 0.3 and 3.0o C min-1 and SAR in the range of 37.2 96.3 Wg-1 were obtained. The photocatalytic activities of pure anatase particles and TiO2 -coated MNPwere close, but the magnetic samples has the advantage of being recovered from reactionmedia by applying the external magnetic fields. The preliminary results of magnetichyperthermia and photocatalysis assays indicate such materials have strong potential forapplications in biomedicine and photocatalysis.
|
10 |
Magnetic Properties Of Sputter Deposited Fe-based Amorphous Thin Films For Resonator ApplicationChina, Chaitali 01 January 2006 (has links)
In this study we investigate the magnetic properties of Fe-based amorphous thin films. Fe1-x-y-zBxSiyCz, Fe80-xNixB20, Fe80-xMnxB20, and Fe73-xMnxB27 films were deposited on silicon and glass substrates in a DC and RF magnetron sputtering system. Inductive magnetic measurements were performed to investigate the magnetic properties, including induced anisotropy and magnetostriction, of the as-deposited and annealed films using an M-H Looper. The chemical composition of the films was characterized using secondary ion mass spectroscopy (SIMS). The physical thickness of the films was determined by use of a stylus profilometer. The M-H Looper studies indicated that the induced anisotropy (Hk) depends strongly on the nickel concentration as well as on the annealing conditions, specifically the time and temperature of the annealing process. For the same metalloid concentration, the induced anisotropy has a maximum as a function of Ni. For the same nickel concentration and annealing time, it was found that the value of Hk decreases with the increase in annealing temperature. For each composition studied, low temperature long time annealing showed a higher value of Hk compared to high temperature short time annealing. From the magnetostriction values of Fe80-xNixB20 alloys, it was found that the sputter deposited films show similar trend but differ in magnitude when compared with ribbon samples. The magnetostriction of annealed thin films is found to be representative of ribbon samples. A potential composition modification to improve the strength of the field induced anisotropy is the addition of low levels of Mn.
|
Page generated in 0.1322 seconds