Spelling suggestions: "subject:"magnetooptic"" "subject:"magnetooptics""
1 |
Development and applications of an alternating gradient force magnetometerLewis, Vernon Geoffrey January 1995 (has links)
No description available.
|
2 |
Nonlinear magneto-optic effects in optically dense Rb vaporNovikova, Irina Borisovna 30 September 2004 (has links)
Nonlinear magneto-optical effects, originated from atomic coherence, are studied both theoretically and experimentally in thermal Rb vapor. The analytical description of the fundamental properties of coherent media are based on the simplified three- and four-level systems, and then verified using numerical simulations and experimental measurements. In particular, we analyze the modification of the long-lived atomic coherence due to various physical effects, such as reabsorption of
spontaneous radiation, collisions with a buffer gas atoms, etc. We also discuss the importance of the high-order nonlinearities in the description of the polarization rotation for the elliptically polarized light. The effect of self-rotation of the elliptical polarization is also analyzed.
Practical applications of nonlinear magneto-optical effects are considered in precision metrology and magnetometery, and for the generation of non-classical states of electromagnetic field.
|
3 |
Magneto-Optic Polymers and DevicesLopez Santiago, Alejandra January 2014 (has links)
For several decades, the field of magneto-optics (MO) has demonstrated applications that have impact on every day applications such as in optical data storage, magnetic field sensing, crucial for magnetoencephalography and magnetocardiography; and compact and efficient optical isolators, among others. In the past, many of these applications and the devices designed for them have heavily relied on inorganic materials. Organic materials with a high MO response represent an interesting alternative to the inorganic equivalent by not only being a more cost efficient solution, but also by allowing the user to modify a number of variables to control and optimize the MO performance depending on the application and level of performance desired. In this dissertation I discuss the MO properties of novel organic materials, starting with polythiophene, which has been of interest due to the strong relationship between its high MO performance and its lamellar structure and regioregularity. I will also be discussing another material system that provides several degrees of MO tunability: magnetite based nanocomposites. A unique and novel synthetic approach described in this dissertation yields both highly transparent and MO responsive polymer films. I will be describing a systematic approach that indicates a strong influence of the size of the nanoparticle as well as the nanoparticle concentration in the MO performance of the bulk polymer, while maintaining high optical quality with minimal scattering and absorption in the visible and near infrared. Finally, I will be discussing the implementation of both a magnetite nanocomposite and a cobalt ferrite based nanocomposite in a free space magnetic field system and demonstrate the proof-of-principle operation of a sensing system.
|
4 |
Magnetization dynamics in NiFe thin filmsSantoni, Albert 12 April 2011 (has links)
The morphology, composition, and magnetic properties of NiFe thin films were characterized. Films with thicknesses up to 137 nm were deposited in an RF induction evaporator at high vacuum (10^-8 mbar). Time resolved magneto-optic Kerr effect microscopy (TR-MOKE) was used to measure the Gilbert damping constant, an important dynamic magnetic property with applications to magnetic data storage. The composition of each film was measured with energy-dispersive X-ray (EDX) microscopy and used to determine the weight percent of Ni and Fe in each film.
A trend of increased damping with increased thickness was found, in agreement with published results. Magnetic properties and roughness were found to differ significantly from previous films grown in the same vacuum chamber by Rudge, and are attributed to different growth modes produced by differing deposition conditions. However, the weight percent of Ni in each film was found to be inconsistent, deviating by up to 7% from the Ni80Fe20 evaporation source. Inconsistent composition, caused by the inability to control deposition parameters, prevents insight into Gilbert damping from being drawn from the analysis. / Graduate
|
5 |
Magneto-optic Kerr and Hall effect measurements for the characterisation of bit patterned mediaAlexandrou, Marios January 2011 (has links)
For the past 50 years, the magnetic storage industry has been the ultimate provider, covering the ever-expanding needs of digital mass storage. Up to now, scaling to smaller dimensions has been the core approach for achieving higher areal densities in conventional media. However, recent studies have shown that further miniaturisation is physically bound by superparamagnetic effects. Bit patterned media (BPM) is one of the most promising solutions for extending the areal densities beyond 1Tbit/in². The ability to magnetically characterise novel BPM is a key requirement for its future commercialisation. The work presented in this thesis describes the investigation of the Magneto-Optic Kerr Effect (MOKE) and the Anomalous Hall Effect (AHE) techniques, used in the characterisation of BPM samples. These samples were produced as part of this work using a customised subtractive fabrication process. Continuous thin magnetic films with Ptseed(10nm)/[Co(0.4nm)/Pt(1nm)]x15 composition and perpendicular anisotropy, were deposited using electron-beam (e-beam) evaporation, and subsequently patterned into magnetic nano-islands through means of e-beam lithography and Ar⁺ ion milling. In terms of the MOKE technique, a fully customised polar MOKE system has been developed and successfully used to observe the hysteretic behaviour of magnetic nano-island arrays with varying dimensions. An expected reduction in the MOKE signal due to pattering has been observed, as well as an additional signal reduction due to the scattering effect arising from the non-vertical sidewalls of the dome-shaped islands. In the case of islands with improved shape profile, the magnetic reversal of BPM arrays with islands sizes down to 35nm has been successfully detected, demonstrating a sensitivity of approximately 6x10⁻¹³emu for the MOKE system. In terms of the AHE technique, Au Hall crosses were deposited on top of the BPM arrays that had been previously characterised by MOKE, allowing the direct comparison and cross-verification of the results obtained by the two techniques. A revised Hall cross design, where the Hall crosses were generated by direct patterning of the Pt seed layer, has provided a significant improvement in AHE signal. This has allowed the detection of the magnetic reversal of individual sub-50nm magnetic islands, demonstrating a sensitivity of approximately 6.6x10⁻¹⁵emu for the AHE technique. The spatial sensitivity of these Hall cross structures has been experimentally determined, indicating a decrease in sensitivity with increasing distance from the cross centre and with decreasing island diameter. In conclusion, the sensitivity profile of Hall cross structures must be taken into account for the accurate interpretation of BPM characterisation results obtained by the AHE technique. Finally, some suggestions are outlined with regard to the future improvement of the developed characterisation techniques and the further continuation of the work presented in this thesis.
|
6 |
Investigating Evidence for a Kosterlitz-Thouless Transition in Fe/W(001) Ultrathin FilmsAtchison, Jordan January 2019 (has links)
The magnetic susceptibility of 3-4ML ultrathin Fe/W(001) films was measured in situ under ultrahigh vacuum using the surface magneto-optic Kerr effect (SMOKE). Susceptibility measurements indicate that Fe/W(001) is a 2DXY system, and therefore undergoes a finite-size Kosterlitz-Thouless (KT) transition at the critical temperature T_KT. The films were grown using molecular beam epitaxy (MBE) and were characterized using Auger electron spectroscopy (AES) and low-energy electron diffraction (LEED). Three distinct categories of susceptibility signals were observed, and are referred to as Type I, II, and III. The primary difference between these signals is the size of the imaginary susceptibility, which likely corresponds to dissipative effects such as domain wall motion. The critical behaviour of the susceptibility in the paramagnetic region is described in the theory by χ(T) ~exp〖〖(B/(T/T_KT-1) 〗^a)〗. A least-squares fit to this paramagnetic region from many independently grown films gives values of a=0.50±0.03 and B=3.48±0.16, which are in quantitative agreement with the KT theory. In comparison to 2nd order phase transitions, a power law fit to the paramagnetic region of the susceptibility yields an effective critical exponent of γ_eff≈3.7±0.7, which does not correspond to any known universality class. / Thesis / Master of Science (MSc) / The magnetic properties of atomically thin iron films, referred to as Fe/W(001), were investigated using the highly sensitive phenomenon known as the surface magneto-optic Kerr effect (SMOKE). Fe/W(001) films were grown using the well-developed technique known as molecular beam epitaxy (MBE), which involved a slow and controlled thermal evaporation of an iron source onto a tungsten substrate. Film thickness and uniformity were verified using Auger electron spectroscopy, and film structure was determined using low energy electron diffraction. Film growth and all subsequent measurements were performed in situ under ultrahigh vacuum (10-10 mbar) to limit surface contamination. Using SMOKE, the magnetic susceptibility of the Fe/W(001) films was measured as a function of temperature to look for evidence of a unique phase transition known as the Kosterlitz-Thouless (KT) transition. Fitting experimental susceptibility data to the theoretical model for the KT transition presented persuasive evidence that Fe/W(001) films undergo a KT transition.
|
7 |
Měřicí systém impulzního proudového zdroje / Measurement system for pulsed current sourceMyška, Radek January 2011 (has links)
This work deals with the description and analysis of suitable methods for measurement of non-periodical high-level current pulses. For pulsed current source design and development a suitable measurement system is required. In this work shunt resistor, Rogowski sensor and magneto-optic sensor are presented. The analysis of their properties is performed in order to design a suitable sensor for test current pulse measurement. A design of Rogowski coil sensor has been made. An experimental measurement of current pulses with short time relations has been performed. The suitability of the coil sensor for non-harmonic waveforms measurement has been evaluated on the basis of measurement results. In case of the magneto-optic sensor a concept utilizing an optical fiber has been proposed. The design of the sensor has been performed also. Individual parts of the sensor were verified. Experimental magneto-optic sensors have been built and their properties have been studied.
|
8 |
Growth and characterization of advanced layered thin film structures : Amorphous SmCo thin film alloysRoos, Andreas January 2012 (has links)
This report describes the growth and characterization of thin amorphous samarium-cobalt alloy films. The samarium-cobalt alloy was grown by DC magnetron sputtering in the presence of an external magnetic field parallel to the thin film. The external magnetic field induces a uniaxial in-plane magnetic anisotropy in the samarium-cobalt alloy. The thin films were characterized with x-ray scattering, and the magnetic anisotropy was characterized with the magneto optic Kerr effect. The measurements showed a uniaxial in-plane magnetic anisotropy in the samarium-cobalt alloy films. It is not clear how amorphous the samples really are, but there are indications of crystalline and amorphous areas in the alloys.
|
9 |
Frequency-Domain Faraday Rotation Spectroscopy (FD-FRS) for Functionalized Particle and Biomolecule CharacterizationMurdock, Richard 01 May 2015 (has links)
In this study, the magnetically-induced vibrations of functionalized magnetic particle suspensions were probed for the development of a novel optical spectroscopy technique. Through this work (1) the frequency-dependence of the faraday rotation in ferrofluids and (2) the extension of this system to elucidating particle size and conformation as an alternative immunossay to costly and labor/time intensive Western Blotting and ELISA has been shown. With its sensitivity and specificity, this method has proven to be a promising multi-functional tool in biosensing, diagnostic, and therapeutic nanomedicine efforts. Due to its ubiquitous nature in all optically-transparent materials, the farady rotation, or circular birefringence, was developed as a robust and sensitive nanoscale biomolecule characterization technique through Brownian relaxation studies of particle suspensions. Current efforts have shown the applicability of this phenomenon in solid, pure liquid, and colloidal samples as well as simultaneous advancements of magnetic nanoparticle research in the magnetometric and magneto-optical regimes. By merging these two fields, a clinically relevant spectroscopy (fd-FRS, Frequency Domain Faraday Rotation Spectroscopy) was developed based on a newly revised model stemming from Debye relazation theory. Through this work, an optical bench with a variable permeability core electromagnet and a frequency-domain lock-in amplifier setup (DC to 20 kHz) have been used to distinguish between Fe3O4-core nanoparticles with functionalization layers of PEG4/PEG8 polymer with future applications involving the Anti-BSA/BSA antibody/antigen couple. Particle concentrations down to 500 nM (magnetic nanoparticles) and 0.01 Volume % (magnetic beads) were studied with diameters ranging from 200 nm to 1μm. currently, the characteristic peak corresponding to the out-of-phase relazation of the suspended particles has been elusive, despite a wide particle size distribution and the use of a balanced photodetector. Future work will involved highly monodisperse samples, faster scan times, and thermal characterization applications of fs-FRS.
|
10 |
Theoretical and experimental study of novel integrated magnetoplasmonic nanostructures / Etude théorique et expérimentale de nanostructures magnétoplasmoniques intégréesHalagacka, Lukas 10 November 2014 (has links)
Ce travail porte sur l’exaltation de l’effet magnéto-optique (MO) Kerr transverse induite par des «résonances extraordinaires» dans un réseau d’or périodique 1D déposé sur un oxyde de grenat magnéto-optique. La structure complète incluant le réseau métallique 1D a été conçue, simulée numériquement, dimensionnée, fabriquée puis caractérisée. Un algorithme de type RCWA (Rigorous Coupled Wave Algorithm) adapté au calcul parallèle a été développé et utilisé d’une part pour l’étude théorique des modes résonants dans les réseaux magnétoplasmoniques et d’autre part pour l’analyse des données de mesures optiques et magnéto-optiques d’ellipsométrie à base de matrices de Mueller. L’impact sur la réflectivité angulo-spectrale du couplage entre les modes Fabry-Pérot des fentes du réseau et les plasmons de surface à l’interface entre l’or et la couche de grenat MO est ainsi étudié, en utilisant les paramètres optiques et magnéto-optiques réels des matériaux. Pour cela, les caractéristiques optiques du substrat en sGGG (grenat de gallium et gadolinium dopé CaMgZr) et du matériau Bi:GIG (grenat de fer et de gadolinium substitué bismuth) sont au préalable déterminés dans la gamme spectrale 0,73 – 6,42 eV (193 nm-1,7 μm) par ellipsométrie à base de matrices de Mueller. Puis de même la dispersion des composantes magnéto-optiques du tenseur diélectrique est obtenue en appliquant un champ magnétique externe dans le plan, en configuration longitudinale ou transverse. Ces données mesurées sont alors utilisées dans les simulations. Il est ainsi démontré numériquement que grâce à l’interaction des résonances de surface et de cavité dans le réseau 1D l’effet Kerr transverse peut être exalté, éteint ou même de signe inversé, et cela sans renverser ou modifier l’aimantation de la couche magnéto-optique. Pour confirmer les résultats théoriques, une série d’échantillons comportant des réseaux de fentes différentes a été fabriquée par lithographie électronique et procédé de lift-off. Afin de reproduire les données des matrices de Mueller mesurées, les modèles ont été adaptés et optimisés pour tenir compte des imperfections des structures réelles. Les mesures expérimentales confirment l’exaltation de l’effet Kerr magnéto-optique transverse due aux effets magnéto-plasmoniques et prouvent la validité des modèles. / This work studies the enhancement of the transverse magneto-optical Kerr effect by exploiting extraordinary resonances occurring in 1D periodic grating. The 1D periodic gold grating structure was designed, described, numerically simulated, and fabricated. A rigorous Coupled Wave Algorithm (RCWA) developed for parallel computing is used for the theoretical study of resonant modes in magnetoplasmonic gratings and for analysis of optical and magneto-optical data measured by Mueller matrix ellipsometry. The impact of coupling between Fabry-Perot modes inside grating air-gaps and surface plasmon mode at the interface between gold and MO garnet layer is studied via spectra of specular reflectivity and for the various angles of incidence. In a first step, the optical functions of the (CaMgZr)-doped gallium-gadolinium garnet (sGGG) substrate and the Bi-substituted gadolinium iron garnet (Bi:GIG) are obtained in the spectral range from 0.73 eV to 6.42 eV (wavelength range 193 nm – 1.7 μm). Subsequently, the spectra of the magneto-optical tensor components are obtained by applying an external in-plane magnetic field in longitudinal and transverse geometry. The obtained functions are then used for numerical simulations demonstrating that by hybridization of surface and cavity resonances in this 1D plasmonic grating, the transverse Kerr effect can be further enhanced, extinguished or even switched in sign and that without inverting or modifying the film's magnetization. To confirm theoretical results a set of samples, gratings with a different width of an air-gap, was fabricated using electron beam lithography and liftoff technique. To be able to reproduce Mueller matrix data from the samples, the models describing realistic structures were further developed and optimized. Experimental measurements of real structures confirm transverse MO effect enhancement using magnetoplasmonic effects and prove applicability of numerical models.
|
Page generated in 0.046 seconds