Doctor Educationis / Energy storage technologies are rapidly being developed due to the increased awareness of global warming and growing reliance of society on renewable energy sources. Among various electrochemical energy storage technologies, high power supercapacitors and lithium ion batteries with excellent energy density stand out in terms of their flexibility and scalability. However, supercapacitors are handicapped by low energy density and batteries lag behind in power. Supercapatteries have emerged as hybrid devices which synergize the merits of supercapacitors and batteries with the likelihood of becoming the ultimate power sources for multi-function electronic equipment and electric/hybrid vehicles in the future. But the need for new and advanced electrodes is key to enhancing the performance of supercapatteries. Leading edge technologies in material design such as nanoarchitectonics become very relevant in this regard. This work involves the preparation of vanadium pentoxide (V2O5), pristine and zinc doped lithium manganese silicate (Li2MnSiO4) nanoarchitectures as well as their composites with hydroxylated graphene (G-ol) and carbon nanotubes (CNT). / 2023-12-02

A project studied wetting of iron, nickel and platinum by molten MnO-SiO2 (MS) and CaO-Al2O3-SiO2 (CAS) slags of eutectic composition to contribute to understanding of wetting behaviour of solid metal-molten oxide systems relevant to steelmaking. Novel results of dynamic wetting behaviour by the sessile drop method were obtained under strongly reducing atmosphere (oxygen partial pressure 10-20 -- 10-18 atm). Terminal contact angles (after 240 min) for MS slag were: for iron substrates -5??2??(1350??C), 9+-2?? (1390??C), 6+-2 (1450??C); nickel -- 3+-2??(1350 and 1390??C); and platinum --15+-2??(1350 and 1390??C), 12+-2??(1450??C). Contact angles with CAS slag were: iron -- 55+-2??(1350??C), 60+-2?? (1390??C), 44+-2?? (1450??C); nickel -- 59+-2??(1350??C), 60+-2?? (1390??C); and platinum -- 15+-2?? (1350, 1390 and 1450??C). Values for interfacial tension, work of adhesion, spreading parameter (S) and interaction coefficient (Ф) were also determined. Work of adhesion for all three substrates with MS slag changed in a very narrow range 910 - 930 mJ/m2. Interfacial tension with this slag was 1,480 mN/m for Ni at 1350-1390??C, and 1,880-1,890 mN/m for Pt in the temperature range 1,350-1,450??C. For iron, interfacial tension was 1,720 mN/m at 1350??C (γ-Fe); it decreased to 1590-1580 mN/m with increasing temperature to 1390 and 1450??C (-Fe). Lower work of adhesion and higher interfacial tension was found for metals with CAS slag. Wetting properties of Pt substrate with MS slag were close to that with CAS slag, while Fe and Ni substrates showed better wetting by MS slag in comparison with CAS slag. This was attributed to higher reactivity of Fe and Ni with MS slag, particularly reduction of MnO. Although MnO was also reduced in reaction with Pt, oxygen adsorption in contact with both slags was a major factor governing wettability of Pt. Dissolution of manganese in nickel and platinum substrates at elevated temperatures modified the interface chemistry, causing formation of a liquid alloy phase. Degree of silica reduction from MS slag was much smaller in comparison with MnO reduction (negligible for Pt); it was very minor from CAS slag. Concentration profiles of Mn and Si across the interface and along the metal surface were used to estimate diffusion coefficients. Diffusion along metal surfaces was generally higher by 1 to 2 orders of magnitude than across the interface. Reduction of oxides and adsorption of oxygen modify the metal-oxide interface, making wetting dynamic. They have a profound on interfacial properties.

A project studied wetting of iron, nickel and platinum by molten MnO-SiO2 (MS) and CaO-Al2O3-SiO2 (CAS) slags of eutectic composition to contribute to understanding of wetting behaviour of solid metal-molten oxide systems relevant to steelmaking. Novel results of dynamic wetting behaviour by the sessile drop method were obtained under strongly reducing atmosphere (oxygen partial pressure 10-20 -- 10-18 atm). Terminal contact angles (after 240 min) for MS slag were: for iron substrates -5??2??(1350??C), 9+-2?? (1390??C), 6+-2 (1450??C); nickel -- 3+-2??(1350 and 1390??C); and platinum --15+-2??(1350 and 1390??C), 12+-2??(1450??C). Contact angles with CAS slag were: iron -- 55+-2??(1350??C), 60+-2?? (1390??C), 44+-2?? (1450??C); nickel -- 59+-2??(1350??C), 60+-2?? (1390??C); and platinum -- 15+-2?? (1350, 1390 and 1450??C). Values for interfacial tension, work of adhesion, spreading parameter (S) and interaction coefficient (Ф) were also determined. Work of adhesion for all three substrates with MS slag changed in a very narrow range 910 - 930 mJ/m2. Interfacial tension with this slag was 1,480 mN/m for Ni at 1350-1390??C, and 1,880-1,890 mN/m for Pt in the temperature range 1,350-1,450??C. For iron, interfacial tension was 1,720 mN/m at 1350??C (γ-Fe); it decreased to 1590-1580 mN/m with increasing temperature to 1390 and 1450??C (-Fe). Lower work of adhesion and higher interfacial tension was found for metals with CAS slag. Wetting properties of Pt substrate with MS slag were close to that with CAS slag, while Fe and Ni substrates showed better wetting by MS slag in comparison with CAS slag. This was attributed to higher reactivity of Fe and Ni with MS slag, particularly reduction of MnO. Although MnO was also reduced in reaction with Pt, oxygen adsorption in contact with both slags was a major factor governing wettability of Pt. Dissolution of manganese in nickel and platinum substrates at elevated temperatures modified the interface chemistry, causing formation of a liquid alloy phase. Degree of silica reduction from MS slag was much smaller in comparison with MnO reduction (negligible for Pt); it was very minor from CAS slag. Concentration profiles of Mn and Si across the interface and along the metal surface were used to estimate diffusion coefficients. Diffusion along metal surfaces was generally higher by 1 to 2 orders of magnitude than across the interface. Reduction of oxides and adsorption of oxygen modify the metal-oxide interface, making wetting dynamic. They have a profound on interfacial properties.

京都大学 / 0048 / 新制・課程博士 / 博士(エネルギー科学) / 甲第18607号 / エネ博第303号 / 新制||エネ||62(附属図書館) / 31507 / 京都大学大学院エネルギー科学研究科エネルギー基礎科学専攻 / (主査)教授 萩原 理加, 教授 佐川 尚, 教授 平藤 哲司 / 学位規則第4条第1項該当 / Doctor of Energy Science / Kyoto University / DFAM

Philosophiae Doctor - PhD / Energy storage technologies are rapidly being developed due to the increased awareness of global warming and growing reliance of society on renewable energy sources. Among various electrochemical energy storage technologies, high power supercapacitors and lithium ion batteries with excellent energy density stand out in terms of their flexibility and scalability. However, supercapacitors are handicapped by low energy density and batteries lag behind in power. Supercapatteries have emerged as hybrid devices which synergize the merits of supercapacitors and batteries with the likelihood of becoming the ultimate power sources for multi-function electronic equipment and electric/hybrid vehicles in the future. But the need for new and advanced electrodes is key to enhancing the performance of supercapatteries. Leading-edge technologies in material design such as nanoarchitectonics become very relevant in this regard. This work involves the preparation of vanadium pentoxide (V2O5), pristine and zinc doped lithium manganese silicate (Li2MnSiO4) nanoarchitectures as well as their composites with hydroxylated graphene (G-ol) and carbon nanotubes (CNT). / 2023-12-01