Zetterberg's Industri AB believe that capital and lead time will be reduced by implementing Kanban. Therefore, it was an investigation to prove that Kanban is an effective method. In this work a research had to be done to show how the material supply system looks like today and to explore the subframe components to see which components that are interesting from Kanban viewpoint. Previous orders of subframes were investigated. Therefore, it was a list of the various components of the previous orders for the subframe. Annual volume and manufacturing steps were developed over the various components and then you could see which components which were most interesting for Kanban. It was some discussions with the supervisor and the Lean coach for a decision to introduce Kanban for 5 components. A research of capital and inventory turnover was done for the components. The work also included the selection of appropriate storage sites for these five components and then selected the sites that were closest to the subframe. After this investigation, it was an estimate of capital and inventory turnover on a specific date for the new changes and then could an easier comparison between the old and the new material supply system. With the results it was easy to conclude that Kanban method is a better method compared to the old system because it showed that the capital reduction decreased and inventory turnover increased for the 5 components. The lead time will also be reduced when the warehouse staff do not need to be involved in the process. It is only the workers for the manufacturing of the components and the workers for the subframe which needs to be involved in the process. The administrative leadtime will also be reduced. Further analysis can be done in a forthcoming work on more components.

Bakgrund: Under de senaste decennierna har industriell logistik fått en allt viktigare roll för att ge företag konkurrensfördelar på den globala marknaden. För att uppnå ökad effektivitet i logistikfunktionen kan konfigurationen av ett internt materialförsörjningssystem ha en betydande inverkan på minimering av icke värdeadderande aktiviteter. Det finns flera principer för intern materialförsörjning, hur dessa appliceras har en signifikant påverkan i en industriell miljö. Valet mellan olika system kännetecknas av en överhängande komplexitet där tillverkningsindustrier byter fram och tillbaka flera gånger. Syfte: Syftet med studien är att föreslå ett ramverk för utveckling av interna materialförsörjningssystem gällande svetsprocess inom metallbearbetning. Genomförande: Studien är genomförd som en enfallsstudie på Hörle Automatic. Där studiens tillvägagångsätt har varit att identifiera icke värdeadderade aktiviteter i fallföretagets interna materialförsörjningssystem till svetsprocessen. För att därefter utveckla deras nuvarande system för att minimera identifierade aktiviteter. Utifrån detta har ett ramverk konstruerats som belyser faktor som ska tas i beaktning vid utveckling av ett internt materialförsörjningssystem. Empiriskt material har samlats in genom intervjuer, observationer, fokusgrupper och arkivmaterial. För att möjliggöra identifiering av icke värdeadderande aktiviteter har en processkartläggning upprättats. Fortsättningsvis har det genomförts tester gällande förslag på arbetssätt som utvecklats. Resultat/Diskussion: Ett ramverk har konstruerats som belyser elva olika faktorer som ska tas i beaktning vid utveckling av ett internt materialförsörjningsystem. Det är faktorer relaterade till produktionsvariation, detaljspecifikation, layout, leverantörer och kommunikation. Slutsats: Det har identifierats totalt 18 icke värdeadderande aktiviteter gällande Hörle Automatics interna materialförsörjningssystem till svetsprocessen. Utvecklingen av det interna materialförsörjningssystemet enligt förslag eliminerar en del icke värdeadderande aktiviteterna som identifierats. Resterande aktiviteter minskas genom utvecklingen av en materialförsörjningsprocess som möjliggör en ny layout och att mer kostnadseffektiv personal utför de icke värdeadderande aktiviteterna / Background: Over the past decades, industrial logistics has gained an increasingly important role in giving companies a competitive edge in the global market. To achieve increased efficiency in the logistics function, the configuration of an internal materials supply system may have a significant impact on minimizing non-value added activities. There are several principles for internal materials supply system, how these are applied have a great impact on it’s industrial environment. The choice between different systems is characterized by an complexity where manufacturing industries change back and forth several times. Purpose: The purpose of this study is to propose a framework for the development of internal materials supply systems in the welding process within metalworking. Methodology: This is a case study at Hörle Automatic. The study approach has been to identify non-value adding activities in the case company's internal materials supply system to the welding process. And after that develop their current system to minimize identified activities. Based on this, a framework has been designed to highlight the factors to be taken into account when developing an internal materials supply system. Empirical material has been collected through interviews, observations, focus groups and archival material. To enable identification of nonvalue-adding activities, a process mapping has been established. Furthermore, tests have been carried out regarding internal materials supply processes to strengthen the author's proposal. Result/Discussion: The result of the study is a framework including eleven factors that companies should take into account when developing an internal materials supply system. The framework involves factors regarding, production variation, item specification, layout, suppliers, and communication. Conclusion: A total of 18 non-value adding activities was identified regarding Hörle Automatic's internal materials supply system in their welding process. The development of the internal materials supply system as proposed eliminates some of the identified nonvalue-adding activities performed by welding operators. The remaining activities are reduced through a new layout and that usage of more cost-effective personnel.