British Columbia Beef Producers' Income Assurance Program (FIAP) was implemented in 1974 to try to alleviate the income instability problem facing B.C. beef producers. The objective of this study was to estimate the costs and effects of FIAP and alternative stabilization schemes in meeting some likely provincial government goals for the B.C. beef industry. Due to a lack of knowledge of policy makers' objectives, simulation was chosen because it is a relatively convenient research technique for studying a non-optimizing problem. Simulation can trace out the likely impacts of alternative schemes, without putting them into practice. A mathematical model was built to incorporate the major features of the B.C. beef industry, in accord with relevant theory, experience and industry knowledge. A set of production assumptions and alternative schemes designed to stabilize beef producer income were also incorporated into the model. Later the mathematical model was translated for use on the computer. The model was validated with historical production data over the period 1959-1978, to ensure that it was a valid representation of the real world system. The model was initially run without government intervention. Then it was run for each of the alternative income stabilization schemes to estimate the likely impacts of each scheme. The cost and effects for different schemes were also compared to show the relative effectiveness of each scheme. The impacts of different schemes were shown by a set of summary measures that were thought to be of most interest to policy makers. Net welfare changes were also estimated and included in the summary measures. The estimated results show that FIAP and the other stabilization schemes considered would be capable of achieving a goal of income instability, when compared to the "no scheme" situation. From the government point of view, the guaranteed price scheme was shown to be most effective in both raising beef producer gross revenue and reducing income variability. FIAP, as it existed in 1977, offered the greatest net producer receipts to B.C. beef producers. / Land and Food Systems, Faculty of / Graduate

Flaked, skinless and boneless turkey thighs were successively washed in 0.03M sodium phosphate buffers at pH 5.8, 7.4 and 8.0. Proximate, mineral and riboflavin composition, as well as protein efficiency ratio (PER) and apparent digestibility (AD) using the rat bioassay technique were determined for three replications. The color modified tissue (CMT) had a higher (P=0.0429) moisture content and less (P=0.0527, 0.1240 and 0.0047, respectively) crude protein, fat and ash than flaked thigh (THI). Percentage of iron, magnesium, phosphorous, potassium and manganese decreased (P=0.0187) after color modification, whereas calcium, zinc and copper concentrations did not change (P=0.1184) and sodium increased (P=0.0058). Riboflavin was reduced by 30%. The PER of CMT evaluated was lower (P=0.0318) than THI, but higher (P=0.0001) than either casein or egg albumin diets. AD of CMT was 90.7% which is comparable to other meat products. The overall nutritional evaluation of CMT determined that it has potential as a raw material in further processed foods. / Master of Science

The processed meats operation of a typical Viiginia meat-packing firm was analyzed to investigate the possibilities of improving the operation. Linear programming was chosen as the analytical tool. Large firms in competing areas have adopted programming and found it profitable. Little information has been available relative to the usefulness of programming to the size of operations typical in Virginia. Least-cost ingredient mixes were developed for the various processed products. Optimum product combinations were ascertained under various conditional restraints. The marginal value products of restrictive resources were estimated. The possibility of improving the pattern of production was investigated and an optimum array of prices portrayed for an established operation. Regardless of the competitive situation faced by the firm, linear programming will be useful in decreasing the cost of the ingredient mixes and in directing the purchase of restrictive ingredients. The feasibility of adjusting an operation in accordance with an optimum product combination and/or an optimum array of prices will be determined largely by the competitive situation faced by a particular firm. Since no two firms operate under the same conditions or face the same competitive situation, the applicability of programming will therefore vary from firm to firm. The results suggest that programming can be an extremely valuable management tool for Virginia packers when used to suggest ways of decreasing operating costs and to provide guidelines for the many decisions involved in the production and sale of processed meats. / Master of Science

Call number: LD2668 .T4 1979 L39 / Master of Science

Call number: LD2668 .T4 1979 N368 / Master of Science

Thesis (MScAgric (Animal Sciences))--University of Stellenbosch, 1985. / The domestication of ostriches and commercial ostrich breeding has a long and interesting history. Orstriches were successfully domesticated in Algeria during 1857 and also successfully bred in Italy during 1859. In South Africa the domestication of wild ostriches started in the Cape Colony with 80 tame birds during 1865. This number increased to 32 247 birds within ten years (De Mosenthal, 1877). Ostrich farming reached a peak during 1913 with 757 000 birds (De Jager, 1985, personal communication). Currently (1985) there are approximately 120 000 domesticated ostriches in South Africa. The commercial production of ostrich meat started in 1958 and the first abattoir was built in 1964. At the present moment 85 000 birds are slaughtered anually. Although the income from the carcass of a 14 month old ostrich comprise only 15% of the total income of a 14 month old bird (With the hide comprising 65% and, the first harvest feathers 20%), the subjects of carcass characteristics and meat quality has long been neglected. Very little is known about the anatomy of the skeleton and muscles of the ostrich, the post mortem reactions of these muscles and the effects of different slaughtering, chilling and deboning practices. The necessity of the above mentioned have proved very usefull in the beef, sheep, pork and poultry industries. With this present study we described the essential skeletal and muscular anatomy and included well known practices to the meat industry, such as electrical stimulation of the carcasses, post mortem pH monotoring of certain muscles, different deboning practices and vacuum packed ageing of selected cuts of ostrich meat. The obtained results are in agreement with general meat science, with expected inter-species variation, e.g. where the final pH-values of pork is relatively low at approximately 5,5; that of beef is higher at 5,7 and ostrich meat even higher at 6,0. Certain other fields of essential research are pointed out in this study, such as the growth and development of the ostrich, as well as certain basic biochemical research on the meat of the ostrich.

Thesis (PhD)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: The ostrich industry is a predominantly quantitative industry; focused mainly on the production of large numbers of slaughter birds for maximum meat and leather yield. Competing in the international market in the current economic environment necessitates a more qualitative approach. Productivity and product quality are aspects that need to be improved in order to stay competitive and economically viable. Genetic parameters for ostrich slaughter traits are lacking, however, and breeding programs are yet to be developed. Data on quantitative and qualitative production and slaughter traits from a commercial ostrich breeding flock was consequently analysed to establish the relative importance of genetic and non-genetic influences on these traits. Genetic and environmental (co)variances as well as estimates of heritability, genetic and phenotypic correlations were estimated for and among the various traits using standard software for multi-trait genetic analyses. Substantial variation, high and favourable genetic correlations as well as moderate to high heritability estimates were found among, and for distinguished body weight traits of growing ostriches. Heritability estimates of 0.14, 0.22, 0.33, 0.43 and 0.43 for 1-month, 4-month, 7-month, 10-month and 13-month-old ostrich weights were estimated in a five-trait animal model analysis. All carcass component weight traits, with the exception of the weight of the liver, showed significant genetic variation. No significant maternal permanent environmental variance was evident for these traits. Heritability estimates ranged from 0.21 (for subcutaneous fat weight) to 0.45 (for neck weight) in multi-trait analyses. The only potentially unfavourable correlation was a high genetic correlation between live weight and subcutaneous fat weight, as fat is considered as a waste product in the present system. The heritability estimates for individual muscle weights ranged from 0.14 to 0.43, while the genetic correlation between these weights and pre-slaughter live weight were all positive, ranging from 0.59 to 0.82. When meat quality traits were analysed it was evident that lightness (L*) and ultimate pH (pHu) showed significant genetic variation, with heritability estimates of 0.37 and 0.42, respectively. L* and pHu were negatively correlated (-0.65 ± 0.19). Since pH is an indicator of various meat quality parameters, it could be considered as an appropriate selection criterion for enhanced meat quality. With the exception of skin grading and crown length, all quantitative and qualitative skin traits showed significant genetic variation. Nodule traits were accordingly moderate to highly heritable. A negative, but favourable, correlation between weight and hair follicle score was ascertained, as hair follicles is a defect that should be selected against. This study demonstrated that sufficient genetic variation exists for most slaughter traits to allow sustained genetic progress for these traits, should it be desired as part of the overall selection objective. Combining some of the current economically important slaughter traits in a provisional selection index, it was clear that weight and crust skin size contributed most to monetary gain (approximately 54 and 38%, respectively). It was also demonstrated with this simple index that monetary gains in slaughter bird production should be easy to achieve at all levels of production performance and data recording. / AFRIKAANSE OPSOMMING: Die volstruisbedryf is hoofsaaklik ‘n kwantitatiewe bedryf wat meerendeels fokus op die produksie van groot getalle slagvolstruise vir die produksie van vleis en leer. Siende dat die bedryf hoofsaaklik op uitvoere fokus, word aanvaar dat ‘n verandering in strategie na ‘n meer kwalitatiewe benadering nodig is, in ag geneem die huidige ekonomiese situasie en marktoestande. Produktiwiteit sowel as produkgehalte moet in ag geneem word vir die bedryf om lewensvatbaar te bly. Daar is egter ‘n gebrek aan genetiese parameters vir volstruisslageienskappe, terwyl doeltreffende teeltstelsels nog ontwikkel moet word. Data van kwantitatiewe en kwalitatiewe produksie- en slageienskappe is gevolglik van ‘n kommersiële volstruis teeltkudde verkry en ontleed om die relatiewe belang van genetiese en nie-genetiese effekte op die eienskappe te kwantifiseer. Genetiese- en omgewings (ko)variansies, asook beramings van oorerflikheid sowel as genetiese en fenotipiese korrelasies, is vervolgens vir en tussen die onderskeie eienskappe beraam deur van standaard sagteware vir veelvuldige-eienskap genetiese ontledings gebruik te maak. Aansienlike variasie, hoë en meestal gunstige korrelasies, sowel as matige tot hoë oorerflikhede, is tussen en vir die onderskeie ligaamsgewigte van groeiende volstruise gevind. Oorerflikheidsberamings van 0.14, 0.22, 0.33, 0.43 en 0.43 is vir 1-maand, 4-maande, 7-maande, 10-maande en 13-maande-oue volstruise in ‘n vyf-eienskap dieremodel ontleding gekry. Alle karkaskomponentgewigte, met die uitsondering van die gewig van die lewer, het betekenisvolle genetiese variasie getoon. Oorerflikheidsberamings het tussen 0.21 (vir onderhuidse vetgewig) en 0.45 (vir nekgewig) gevarieer in veelvuldige-eienskapontledings. Die enigste moontlike ongunstige korrelasie was tussen liggaamsgewig en onderhuidse vetgewig, siende dat vet as ‘n afvalproduk gereken word in die huidige stelsel. Die oorerflikhede van die gewigte van indiwiduele spiere het van 0.14 tot 0.43 gevarieer, terwyl die genetiese korrelsies tussen hierdie gewigte en voorslaggewig deurgaans positief was, met waardes wat van 0.59 tot 0.82 gewissel het. Tydens die ontleding van vleisgehalte eienskappe was dit duidelik dat ligtheid (L*) en uiteindelike pH (pHu) genetiese variasie getoon het, met oorerflikheidsberamings van onderskeidelik 0.37 en 0.42. L* en pHu was negatief gekorreleerd op die genetiese vlak (-0.65 ± 0.19). Aangesien pH ‘n aanduiding is van verskeie vleisgehalteparameters, kan dit moontlik as ‘n indirekte seleksie-kriterium vir verbeterde vleisgehalte gesien word. Alle kwantitatiewe en kwalitatiewe veleienskappe het genetiese variasie getoon, met die uitsondering van velgradering en kroonlengte. Knoppie-eienskappe van die veerfollikels op die vel was ooreenstemmend matig tot hoog oorerflik. ‘n Negatiewe, maar gunstige, genetiese korrelasie is tussen liggaamsgewig en haarfollikelpunt beraam, siende dat haarfollikels ‘n defek is waarteen daar geselekteer moet word. Hierdie studie dui op voldoende genetiese variasie vir die meeste slageienskappe om voldoende genetiese vordering te verseker indien dit verlang sou word. Somminge van hierdie eienskappe wat tans van ekonomiese belang is, is vervolgens in ‘n voorlopige seleksie-indeks gekombineer. Dit was duidelik dat liggaamsgewig en velgrootte die meeste tot monetêre vordering bygedra het (onderskeidelik ongeveer 54 en 38%). Dit is vervolgens aangetoon dat monetêre vordering maklik haalbaar behoort te wees op alle vlakke van produksieprestasie en data-aantekening.

Limited published data exists on the Australian duck industry, particularly in relation to the nutritional requirements of the commercial duck (Anas Platyrhynchos). A series of seven experiments was designed to determine whether current nutritional recommendations for energy, lysine, methionine, threonine and tryptophan were sufficient to optimise growth, feed efficiency, and carcass characteristics of the duck. The ability of the duck to perform diet self selection was then examined for its potential use in the Australian industry. The outcome of the diet self selection experiments showed that ducks sometimes self select diets when offered choices from four diets differing in nutrient density. A key outcome of this research was the development of a revised set of nutrient specifications designed to maximise the performance of the Australian commercially grown duck. These proposed specifications could be economically beneficial to the expanding Australian duck industry / Doctor of Philosophy (PhD)

Some industrial relations researchers have considered the meat processing industry as one of the more strike-prone industries in Australia. Many researchers have analysed this industry from either a political economy perspective or a union industrial relations perspective. This thesis acknowledges this body of literature, but takes as its focus the ways that employers have shaped the industry?s industrial relations. Employers, far from being reactive or even passive actors in shaping the industry?s industrial relations, have taken a long-term active role in this area. This thesis, therefore, focuses on an historical analysis of the changing roles of employers and employer associations in the industry?s industrial relations. This thesis will identify and link the relevant theoretical literature to the historical narrative, and then link this to actual events through three case studies analysing three exemplar employers. The findings of this thesis are that employers have had and made strategic choices about the industry?s industrial relations, at the workplace, industry and national-levels. The rise of AMH, which forms much of the second half of the narrative and analysis, shaped the industry?s industrial relations in ways not seen before in the Australian meat processing industry. Thus, the strategic choices on by many medium and larger meat-industry employers at the time, proved ineffective in the face of AMH?s success in driving down the cost of the wage-effort bargain, rendering many uncompetitive on both the input and output sides of the product market.

Thesis (M.S.)--University of Missouri-Columbia, 2003. / Typescript. Includes bibliographical references (leaves 59-78). Also available on the Internet.