Thesis (MTech (Mechanical Engineering))--Cape Peninsula University of Technology, 2005 / The working characteristics of a shape memory alloy element providing either sensor or actuator capability is specified by the beginning and/or completion temperatures of the actuation (Le. austenitic start and finish temperatures and martensitic start and finish temperatures), the working actuator stroke (i.e. load induced twinned=:>de-twinned martensitic phase transformation also known as quasi-plastic deformation), and the working actuator force (provided by the temperature induced de-twinned martensite

It is well known that composite materials have a poor resistance to the damage caused by the impact of foreign objects on their outer surface. There are various methods for improving the impact damage tolerance of composite materials, such as: fiber toughening, matrix toughening, interface toughening, throughthe- thickness reinforcements and selective interlayers and hybrids. Hybrid composites with improved impact resistance would be particularly useful in military and commercial civil applications. Hybridizing composites using shape memory alloys (SMAs) is one solution since SMA materials can absorb the energy of impact through superelastic deformation or recovery stress reducing the effects of the impact on the composite structure. The SMA material may be embedded in the hybrid composites (SMAHC) in many different forms and also the characteristics of the fiber reinforcements may vary, such as SMA wires in unidirectional laminates or SMA foils in unidirectional laminates only to cite two examples. Recently SMA fibers have been embedded in 2-D woven composites. As part of this PhD work, the existing theoretical models for woven composites have been extended to the case of woven SMAHC using a multiscale methodology in order to predict the mechanical properties and failure behavior of SMAHC plates. Also several parts of the model have been coded in MATLAB and validated against results extracted from the literature, showing good correlation.

The development of a leading edge propeller blade reconfiguration system using Shape Memory Allow (SMA) muscles is presented. This work describes the design and testing of a leading edge flap, which is used to alter the local camber of a propeller blade. The leading edge flap is deflected by SMA wires housed in the blade and maintained in a fixed position with a shaft locking and releasing mechanism. A locking and releasing mechanism is utilized so that constant actuation of the SMAs is not required to maintain leading edge deflection. The profile at 70% span of the propeller blade was used to create a two-dimensional blade for leading edge flap design implementation and load testing. Deflection of up to five degrees was obtained with the final design of the leading edge flap and locking and releasing mechanism. The SMA muscles used to deflect the leading edge were actuated electronically through resistive heating and were controlled by a proportional/integral gain control algorithm with closed-loop feedback from a linear displacement sensor within the blade. With the final design of the leading edge flap and locking and releasing mechanism, a preliminary design for a three-dimensional propeller was created.

Most e orts on High Temperature Shape Memory Alloys (HTSMAs), have focused on improving their work characteristics by thermomechanical treatment methods. However, the in uence of transformation induced plasticity (TRIP) and viscoplasticity during actuation has not been studied. The objective of this dissertation work was to study the in uence of plasticity and viscoplasticity on the transformation characteristics that occur during two common actuation-loading paths in TiPdNi HTSMAs. Thermomechanical tests were conducted along di erent loading paths. The changes in the transformation temperature, actuation strain and irrecoverable strain during the tests were monitored. Transmission Electron Microscopy (TEM) studies were also conducted on select test specimens to understand the underlying microstructural changes. The study revealed that plasticity, which occurs during certain actuation load paths, alters the transformation temperatures and/or the actuation strain depending on the loading path chosen. The increase in the transformation temperature and the irrecoverable strain at the end of the loading path indicated that the rate independent irrecoverable strain results in the generation of localized internal stresses. The increased transformation temperatures were mapped with an equivalent stress (which corresponds to an internal stress) using the as-received material's transformation phase diagram. A trend for the equivalent internal stress as a function of the applied stress and accumulated plastic strain was established. Such a function can be implemented into thermomechanical models to more accurately capture the behavior of HTSMAs during cyclic actuation. On the contrary, although the viscoplastic strain generated during the course of constant stress thermal actuation could signi cantly reduce actuation strain depending on the heating/cooling rate. Additional thermomechanical and microstructural tests revealed no signi cant change in the transformation behavior after creep tests on HTSMAs. Comparing the thermomechanical test results and TEM micrographs from di erent cases, it was concluded that creep does not alter the transformation behavior in the HTSMAs, and any change in the transformation behavior can be attributed to the retained martensite which together with TRIP contributes to the rate independent irrecoverable strain. As a consequence, a decrease in the volume fraction of the martensite contributing towards the transformation must be considered in the modeling.

Magnetic Shape Memory Alloys (MSMAs) combine shape-change/deformationrecovery abilities of heat driven conventional shape memory alloys (SMA) and magnetic field driven magnetostrictives through martensitic transformation. They are promising for actuator applications, and can be employed as sensors/power-harvesters due to their capability to convert mechanical stimuli into magnetic response or vice versa. The purpose of the present work was to investigate magneto-thermo-mechanical (MTM) response of various MSMAs, under simultaneously applied magnetic field, heat and stress. To accomplish this, two novel testing systems which allowed absolute control on magnetic field and stress/strain in a wide and stable range of temperature were designed and manufactured. MTM characterization of MSMAs enabled us to determine the effects of main parameters on reversible magnetic field-induced phase transformation (FIPT), such as magnetocrystalline anisotropy energy, Zeeman energy, stress hysteresis, thermal hysteresis, critical stress to start stress induced phase transformation and crystal orientation. Conventional SMA characteristics of single crystalline Ni2MnGa and NiMnCoIn and polycrystalline NiMnCoAl and NiMnCoSn MSMAs were investigated using the macroscopic MTM testing system to reveal how these conventional properties were linked to magnetic-field-induced actuation. An actuation stress of 5 MPa and a work output of 157 kJm?3 were obtained by the field-induced martensite variant reorientation (VR) in NiMnGa alloys. FIPT was investigated both in Ni2MnGa MSMA and in NiMnCoIn metamagnetic SMA. It proved as an alternative governing mechanism of field-induced shape change to VR in Ni2MnGa single crystals: one-way and reversible (0.5% cyclic magnetic field induced strain (MFIS) under 22 MPa) stress-assisted FIPTs were realized under low field magnitudes (< 0.7 Tesla) resulting in at least an order of magnitude higher actuation stress levels than those in shape memory alloys literature. The possibility of harvesting waste mechanical work as electrical power by means of VR in NiMnGa MSMAs was explored: without enhanced pickup coil parameters or optimized power conditioning circuitry, 280 mV was harvested at 10 Hz frequency within a strain range of 4.9%. For the first time in magnetic shape memory alloys literature, a fully recoverable MFIS of 3% under 125 MPa was attained on single crystalline metamagnetic SMA NiMnCoIn by means of our microscopic MTM testing system to understand the evolution of FIPT under simultaneously applied magnetic field and stress. Conventional SMA characteristics of polycrystalline bulk NiMnCoAl and sintered compacted-powder NiMnCoSn metamagnetic SMAs were also investigated, with and without applied field.

The development of a leading edge propeller blade reconfiguration system using Shape Memory Allow (SMA) muscles is presented. This work describes the design and testing of a leading edge flap, which is used to alter the local camber of a propeller blade. The leading edge flap is deflected by SMA wires housed in the blade and maintained in a fixed position with a shaft locking and releasing mechanism. A locking and releasing mechanism is utilized so that constant actuation of the SMAs is not required to maintain leading edge deflection. The profile at 70% span of the propeller blade was used to create a two-dimensional blade for leading edge flap design implementation and load testing. Deflection of up to five degrees was obtained with the final design of the leading edge flap and locking and releasing mechanism. The SMA muscles used to deflect the leading edge were actuated electronically through resistive heating and were controlled by a proportional/integral gain control algorithm with closed-loop feedback from a linear displacement sensor within the blade. With the final design of the leading edge flap and locking and releasing mechanism, a preliminary design for a three-dimensional propeller was created.

Thesis (Ph. D.)--University of Washington, 2002. / Vita. Includes bibliographical references (leaves 130-134).

Thesis (M.S. in Mechanical Engineering)--Naval Postgraduate School, March 2004. / Thesis advisor(s): Indranath Dutta. Includes bibliographical references (p. 45-47). Also available online.

No description available.

No description available.