京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第19733号 / 工博第4188号 / 新制||工||1646(附属図書館) / 32769 / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 辻 康之, 教授 大江 浩一, 教授 中村 正治 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第20409号 / 工博第4346号 / 新制||工||1674(附属図書館) / 京都大学大学院工学研究科合成・生物化学専攻 / (主査)教授 村上 正浩, 教授 吉田 潤一, 教授 杉野目 道紀 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21115号 / 工博第4479号 / 新制||工||1696(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 辻 康之, 教授 近藤 輝幸, 教授 中村 正治 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

No description available.

Polylactic acid (PLA) is one of the most promising bio-compostable and biodegradable thermoplastic made from renewable sources. PLA, is typically obtained by polymerising lactide monomer. The technique mainly used for ring opening polymerization (ROP) of Lactide is based on metallic/bimetallic catalyst (Sn, Zn, and Al) or other organic catalysts in suitable solvent. However, the PLA synthesized using such catalysts may contain trace elements of the catalyst, which may be toxic. In this work, reactive extrusion experiments using stannous octoate Sn(Oct)2 and tri-phenyl phosphine (PPh)3 were considered to perform ROP of lactide monomer using ultrasound as an alternative energy (AE) source for activating and/or boosting the polymerization. Mathematical model of ROP of lactide, was developed to estimate the impact of reaction kinetics and AE source on the polymerization process. Ludovic® software, a commercial code was used. It was adopted for the simulation of continuous reactive extrusion of PLA. Results from experiments and simulations were compared to validate the simulation methodology. Results indicate that the application of AE source in reaction process boost the PLA formation rate. Result obtained through Ludovic simulation and experiments were validated. It was shown that there is a case for reducing the residence time distribution (RTD) in Ludovic due to the ‘liquid’ monomer flow in the extruder. This change in the parameters resulted in validation of the simulation. However, it was concluded that the assumption would have to be established by doing further validations. The simulation model includes the details of kinetics of reactions involved with in the process and helps to upscale the reaction output. This work also estimates the usefulness and drawbacks of using different catalysts as well as effect of alternative energies and future aspects for PLA production.

Les plastiques sont devenus les matériaux les plus utilisés pour la préservation de denrées alimentaires. Malgré leurs nombreux avantages (transparence, prix, modularité, propriété barrière aux gaz), leur imperméabilité à l’oxygène doit être sans cesse améliorée afin d’éviter aux denrées de subir diverses réactions d’oxydation et ainsi prolonger leurs durées de conservation. Pour cela, une solution envisageable consiste à combiner à des polymères, des catalyseurs métalliques pour piéger l’oxygène. Cette possibilité a été étudiée dans cette thèse. Après un premier chapitre introductif, le deuxième décrit les propriétés physico-chimiques des différents catalyseurs métalliques sélectionnés (stabilité, constantes de protonation, constante de complexation envers le cobalt(II) et le manganèse (II), capacité d’oxygénation, électrochimie). Le troisième chapitre est consacré à leur utilisation en tant qu’oxydant métallique de substrats organiques. Enfin le quatrième et dernier chapitre présente une étude à l’état solide de l’oxydation de polymères en présence de catalyseurs métalliques. Une large part de ce dernier chapitre a été consacrée à la caractérisation des produits d’oxydation. / Plastics are becoming the most used material for food and drinks preservation. Despite their numerous advantages (transparency, price, modularity, gas barrier property), their oxygen barrier properties have to be improved to avoid hazardous oxidation reactions to foods and drinks and so to increase their shelf-life. One alternative to solve this problem is to combine polymers and metal catalysts to scavenge oxygen. This possible strategy was investigated during this Ph.D. project. After a first introductive chapter, the second depicts the physico-chemical properties of selected metal catalysts (stability, protonation constants, complexation constants towards cobalt(II) and manganese(II), oxygenation capacity, electrochemistry). The third chapter is devoted to their use as powerful oxidant of organic substrate. Finally, the last chapter is dedicated to a solid-state study of polymer oxidation in the presence of metal catalysts. A large part of this last chapter has been devoted to the thorough elucidation of the nature/structure of the oxidized product(s).

No description available.

The world energy supply and demand, together with limited available resources have resulted in the need to develop alternative energy sources to ensure sustainable and expanding economies. Hydrogen is being considered a viable option with particular application to fuel cells. The Hybrid Sulphur cycle has been identified as a process to produce clean hydrogen (carbon free process) and can have economic benefits when coupled to nuclear reactors (High Temperature Gas Reactor) or solar heaters for the supply of the required process energy. The sulphur trioxide decomposition reactor producing sulphur dioxide for the electrolytic cells in a closed loop system has been examined, but it is clear that development with respect to a more durable active catalyst in a reactor operating under severe conditions needs to be investigated. A suitable sulphur trioxide reactor needs to operate at a high temperature with efficient heating in view of the endothermic reaction, and has to consist of special materials of construction to handle the very corrosive reactants and products. This investigation was undertaken to address (1) the synthesis, characterisation, reactivity and stability of a suitable catalyst (2), determination the reaction rate of the chosen catalyst with a suitable micro reactor (3) construction and evaluation of a packed bed reactor for the required reaction, and (4) the development and validation of a reactor model using computational fluid dynamics with associated chemical reactions. A supported catalyst consisting of 0.5 wt% platinum and 0.5 wt% palladium on rutile (TiO2, titania) was prepared by the sintering of an anatase/rutile supported catalyst with the same noble metal composition, synthesized according to an incipient impregnation procedure using cylindrical porous pellets (±1.7 mm diameter and ±5 mm long). Characterization involving: surface area, porosity, metal composition, - dispersion, - particle size, support phase and sulphur content was carried out and it was found from reactivity determinations that the sintered catalyst, which was very different from the synthesized catalyst, had an acceptable activity and stability which was suitable for further evaluation. A micro pellet reactor was constructed and operated and consisted of a small number of pellets (five) placed apart from each other in a two-stage quartz reactor with sulphur trioxide generated from sulphuric acid in the first stage and the conversion of sulphur trioxide in the second stage, respectively. Attention was only confined to the second stage involving the conversion of sulphur trioxide with the supported catalyst. The overall reaction kinetics of the pellets involving momentum, heat and mass transfer and chemical reaction was evaluated and validated with constants obtained from literature and with an unknown reaction rate equation for which constants were obtained by regression. As result of the complexity of the flow, mass and heat transfer fields in the micro pellet reactor it was necessary to use a CFD model with chemical reactions which was accomplished with a commercial code COMSOL MultiPhysics® 4.3b. A reversible reaction rate equation was used and a least squares regression procedure was used to evaluate the activation energy and pre-exponential factor. The activation energy obtained for the first order forward reaction was higher than values obtained from literature for a first order reaction rate (irreversible reaction) for the platinum group metals on titania catalysts. Detailed analyses of the velocity, temperature and concentration profile revealed the importance of using a complex model for determination of the reaction parameters. A fixed bed reactor system consisting of a sulphuric acid vaporizer, a single reactor tube (1 m length, 25 mm OD) heated with a surrounding electrical furnace followed, by a series of condensers for the analysis of the products was constructed and operated. Three process variables were investigated, which included the inlet temperature, the weight hourly velocity and the residence time in order to assess the performance of the reactor and generate results for developing a model. The results obtained included the wall and reactor centreline temperature profiles together with average conversion. As a result of the complexity of the chemistry and the phases present containing the products from the reactor a detailed calculation was done using vapour/liquid equilibrium with the accompanying mass balance (Aspen-Plus®) to determine the distribution of sulphur trioxide, sulphur dioxide, oxygen and steam. A mass balance was successfully completed with analyses including SO2 with a GC, O2 with a paramagnetic cell analyser, acid/base titrations with sodium hydroxide, SO2 titrations with iodine and measurement of condensables (mass and volume). The results obtained showed that a steady state (constant conversion) was obtained after approximately six hours and that it was possible to obtain sulphur trioxide conversion approaching equilibrium conditions for bed lengths of 100 mm with very low weight hourly space velocities. A heterogeneous 2D model consisting of the relevant continuity, momentum, heat transfer and mass transfer and the reaction rate equation determined in this investigation was developed and solved with the use of the commercial code COMSOL MultiPhysics® 4.3b with an appropriate mesh structure. The geometry of the packed bed (geometry) was accomplished by generating a randomly packed bed with a commercial package DigiPac™. The model predicted results that agreed with experimental results with conversions up to 56%, obtained over the following ranges: weight hourly space velocity equal to 15 h-1, temperatures between 903 K and 1053 K and residence times between 0.1 and 0.07 seconds. The post-processing results were most useful for assessing the effect of the controlling mechanisms and associated parameters. / PhD (Chemical Engineering), North-West University, Potchefstroom Campus, 2014

The world energy supply and demand, together with limited available resources have resulted in the need to develop alternative energy sources to ensure sustainable and expanding economies. Hydrogen is being considered a viable option with particular application to fuel cells. The Hybrid Sulphur cycle has been identified as a process to produce clean hydrogen (carbon free process) and can have economic benefits when coupled to nuclear reactors (High Temperature Gas Reactor) or solar heaters for the supply of the required process energy. The sulphur trioxide decomposition reactor producing sulphur dioxide for the electrolytic cells in a closed loop system has been examined, but it is clear that development with respect to a more durable active catalyst in a reactor operating under severe conditions needs to be investigated. A suitable sulphur trioxide reactor needs to operate at a high temperature with efficient heating in view of the endothermic reaction, and has to consist of special materials of construction to handle the very corrosive reactants and products. This investigation was undertaken to address (1) the synthesis, characterisation, reactivity and stability of a suitable catalyst (2), determination the reaction rate of the chosen catalyst with a suitable micro reactor (3) construction and evaluation of a packed bed reactor for the required reaction, and (4) the development and validation of a reactor model using computational fluid dynamics with associated chemical reactions. A supported catalyst consisting of 0.5 wt% platinum and 0.5 wt% palladium on rutile (TiO2, titania) was prepared by the sintering of an anatase/rutile supported catalyst with the same noble metal composition, synthesized according to an incipient impregnation procedure using cylindrical porous pellets (±1.7 mm diameter and ±5 mm long). Characterization involving: surface area, porosity, metal composition, - dispersion, - particle size, support phase and sulphur content was carried out and it was found from reactivity determinations that the sintered catalyst, which was very different from the synthesized catalyst, had an acceptable activity and stability which was suitable for further evaluation. A micro pellet reactor was constructed and operated and consisted of a small number of pellets (five) placed apart from each other in a two-stage quartz reactor with sulphur trioxide generated from sulphuric acid in the first stage and the conversion of sulphur trioxide in the second stage, respectively. Attention was only confined to the second stage involving the conversion of sulphur trioxide with the supported catalyst. The overall reaction kinetics of the pellets involving momentum, heat and mass transfer and chemical reaction was evaluated and validated with constants obtained from literature and with an unknown reaction rate equation for which constants were obtained by regression. As result of the complexity of the flow, mass and heat transfer fields in the micro pellet reactor it was necessary to use a CFD model with chemical reactions which was accomplished with a commercial code COMSOL MultiPhysics® 4.3b. A reversible reaction rate equation was used and a least squares regression procedure was used to evaluate the activation energy and pre-exponential factor. The activation energy obtained for the first order forward reaction was higher than values obtained from literature for a first order reaction rate (irreversible reaction) for the platinum group metals on titania catalysts. Detailed analyses of the velocity, temperature and concentration profile revealed the importance of using a complex model for determination of the reaction parameters. A fixed bed reactor system consisting of a sulphuric acid vaporizer, a single reactor tube (1 m length, 25 mm OD) heated with a surrounding electrical furnace followed, by a series of condensers for the analysis of the products was constructed and operated. Three process variables were investigated, which included the inlet temperature, the weight hourly velocity and the residence time in order to assess the performance of the reactor and generate results for developing a model. The results obtained included the wall and reactor centreline temperature profiles together with average conversion. As a result of the complexity of the chemistry and the phases present containing the products from the reactor a detailed calculation was done using vapour/liquid equilibrium with the accompanying mass balance (Aspen-Plus®) to determine the distribution of sulphur trioxide, sulphur dioxide, oxygen and steam. A mass balance was successfully completed with analyses including SO2 with a GC, O2 with a paramagnetic cell analyser, acid/base titrations with sodium hydroxide, SO2 titrations with iodine and measurement of condensables (mass and volume). The results obtained showed that a steady state (constant conversion) was obtained after approximately six hours and that it was possible to obtain sulphur trioxide conversion approaching equilibrium conditions for bed lengths of 100 mm with very low weight hourly space velocities. A heterogeneous 2D model consisting of the relevant continuity, momentum, heat transfer and mass transfer and the reaction rate equation determined in this investigation was developed and solved with the use of the commercial code COMSOL MultiPhysics® 4.3b with an appropriate mesh structure. The geometry of the packed bed (geometry) was accomplished by generating a randomly packed bed with a commercial package DigiPac™. The model predicted results that agreed with experimental results with conversions up to 56%, obtained over the following ranges: weight hourly space velocity equal to 15 h-1, temperatures between 903 K and 1053 K and residence times between 0.1 and 0.07 seconds. The post-processing results were most useful for assessing the effect of the controlling mechanisms and associated parameters. / PhD (Chemical Engineering), North-West University, Potchefstroom Campus, 2014

Thesis (M. Tech. Chemistry, Dept. of Chemistry, Faculty of Applied and Computer Sciences)--Vaal University of Technology, 2010. / Membrane separation processes offer a promising alternative to energy-intensive separation processes such as distillation and solvent extraction. NF and RO are among the most investigated membrane processes with a potential use in the chemical industry. Carbon-carbon coupling reactions feature in the top ten most used reactions in the chemical industry. These reactions often use homogeneous palladium, nickel and other precious catalysts which are often difficult to separate from reaction products. This leads to potential product contamination and loss of active catalysts. This not only poses a threat to the environment but is also costly to the chemical industry. The purpose of this study was to investigate the efficiency of the recovery of the metal catalysts by selected membrane processes. Four commercial polymeric NF and RO membranes (NF90, NF270, BW30 and XLE) were selected for the study. Palladium catalysts commonly used in Heck and Suzuki coupling reactions were selected. These are Pd(OAc)2, Pd(OAc)2(PPh3)2, PdCl2 and Pd(PPh3)2Cl2. A range of organic solvents were also selected for the study. All the membranes were characterized for pure water permeability, pure solvent permeability, swelling, surface morphology and chemical structure. The chemical and catalytic properties of the catalysts were determined. Catalytic activity was investigated by performing coupling reactions. These catalysts generally performed well in the Heck coupling reaction with sufficient yields realized. The catalysts showed poor activities in the Suzuki and Sonogashira coupling reactions. These coupling reaction systems were affected by rapid palladium black formation. vi Catalyst retention studies showed the influence of membrane-solute interactions such as steric hindrance and size exclusion. The larger catalyst, Pd(OAc)2(PPh3)2 was rejected better by all the membranes irrespective of the solvent used. The smaller catalyst, Pd(OAc)2 was the most poorly rejected catalyst. This catalyst showed signs of instability in the selected solvents. An interesting finding from this study is that of higher rejections in water compared to other solvents for a particular catalyst. In this regard, the influence of solventsolute effects was evident. Generally, higher rejections were observed in solvents with higher polarity. This has been explained by the concept of solvation. It has been shown that solvents with different polarity solvate solutes differently, therefore leading to a different effective solute diameter in each solvent. Catalyst separation using NF90 membrane was attempted for the Heck coupling reaction system. The reaction-separation procedure was repeated for two filtration cycles with rapid activity decline evident. This was regarded as very poor showing of the catalyst separation efficiency of the membrane. Other authors in similar studies using SRNF membranes have reported reaction-separation processes of up to seven cycles. This observation shows the inferiority of polymeric membranes in organic solvent applications such as catalyst separation.