Made available in DSpace on 2014-12-17T15:42:25Z (GMT). No. of bitstreams: 1 VivianeOC_DISSERT.pdf: 3402531 bytes, checksum: e2e7a469bf001a9ef16d573773ea7bda (MD5) Previous issue date: 2014-01-24 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / Metal Organic Frameworks (MOFs) are supramolecular structures consisted of ions or metal clusters coordinated to organic ligands which are repeated in two or three dimensions. These structures have atracted much attention due to their properties such as low density, high specific surface area and large volume of pores. In this work, MOFs consisted of zinc clusters connected by ditopic ligands, terephthalic acid (1,4- H2BDC) or isophthalic acid (1,3-H2BDC) were synthesized. To obtain the proposed materials, different routes and synthetic parameters were tested, such as the molar ratio of the precursors, the addition of template molecules, the type of solvente, the addition of organic base or the type of a counter-ion of Zn salt. It was found that the variation of these parameters led to the formation of different metalorganic structures. The solids obtained were characterized by XRD, SEM and IR. For the samples identified as MOF- 5, it was verified that the structure was composed of both interpenetrated and non interpenetrated structures. These samples showed a low stability, becoming totally transformed into another structure within less than 72 hours. The addition of the nickel and/or cobalt was found to be a promissing method for increasing the stability of MOF- 5, which in this case, still remained unconverted to another structure even after 15 days of exposure to air. The samples prepared from 1,3-H2BDC were probably new, still unknown Metal Organic Frameworks / Redes Metalorg?nicas (MOFs) s?o estruturas supramoleculares constitu?das de ?ons ou clusters met?licos coordenados com ligantes org?nicos que se repetem em duas (2D) ou tr?s (3D) dimens?es. Essas estruturas t?m atra?do muita aten??o devido ?s suas propriedades, como por exemplo, baixa densidade, elevada ?rea superficial espec?fica e elevado volume de poro livre. Neste trabalho foram sintetizadas MOFs formadas por clusters met?licos de zinco conectados por ligantes dit?picos, ?cido tereft?lico (1,4- H2BDC) ou isoft?lico (1,3-H2BDC). Para a obten??o dos materiais propostos foram testadas diferentes rotas e par?metros de s?ntese, tais como, raz?o molar dos precursores, adi??o de mol?culas de molde, tipo de solvente, adi??o de base org?nica ou do contra-?on do sal de Zn. Constatou-se que a varia??o destes par?metros pode conduzir a forma??o de diferentes estruturas metalorg?nicas. Os s?lidos obtidos foram caracterizados por DRX, MEV e IV e TG. Para as amostras onde foi identificada a rede metalorg?nica MOF-5 verificou-se a exist?ncia de por??es de estrutura interpenetrada, assim como de estrutura n?o interpenetrada. Estas amostras apresentaram baixa estabilidade, convertendo-se totalmente em outra estrutura num per?odo de tempo inferior a 72 h. A adi??o de n?quel e/ou cobalto mostrou-se promissora para o aumento de estabilidade da MOF-5, a qual foi identificada mesmo ap?s 15 dias de exposi??o ao ar. Dentre as amostras preparadas com 1,3-H2BDC apenas uma estrutura foi identificada, com base nos bancos de dados de estruturas conhecidas, levando a crer que tr?s redes metalorg?nicas obtidas apresentam estruturas in?ditas

Mes travaux de thèse ont porté sur les matériaux hybrides organiques-inorganiques (Metal-Organic Frameworks, ou MOFs) qui constituent une nouvelle classe de matériaux cristallins et nanoporeux, formés de centres métalliques interconnectés par des ligands organiques, dont les applications dans le domaine des technologies de séparation et d'adsorption de gaz d'intérêt industriel sont très prometteuses. Je me suis particulièrement intéressée aux Soft Porous Crystals, qui présentent une flexibilité structurale de grande amplitude en réponse à des stimuli externes tels que la température, la pression mécanique ou l'adsorption de molécules. Afin de mieux comprendre la très large gamme des comportements observés pour la flexibilité des matériaux hybrides organiques-inorganiques, j'ai développé au cours de ma thèse une méthodologie complète de ces matériaux en combinant différentes méthodes de simulation moléculaire classique et quantique. Dans un premier temps, j'ai étudié les propriétés mécaniques de ces nouveaux matériaux flexibles dans le régime élastique. J'ai ainsi pu identifier la signature élastique des Soft Porous Crystals et mettre en évidence l'origine microscopique de la flexibilité structurale de ces matériaux hybrides. Je me suis ensuite intéressée à la stabilité mécanique de ces matériaux en fonction de la température, de la pression mécanique et de l'adsorption de molécules. Et notamment au phénomène d'amorphisation sous pression et au polymorphisme induit par l'intrusion de fluide de certaines MOFs. Dans un dernier temps, j'ai étudié l'influence de la géométrie, de la topologie structurale et de la fonctionnalisation des matériaux de la famille des ZIFs sur leurs propriétés d'adsorption d'eau. J'ai alors montré comment les propriétés d'hydrophobicité de ces matériaux peuvent être modulées.

MOF-5 ist der Archetyp einer neuartigen Klasse hochporöser Materialien, den Metal Organic Frameworks, die unter anderem zur Anwendung als effektive Gasspeicher geeignet sind. Im Rahmen dieser Arbeit werden die seiner Bildung zugrunde liegenden Reaktionen untersucht. Aus den Erkenntnissen dieser Untersuchungen wurden zwei neue Syntheseverfahren entwickelt. Eines der Verfahren beruht auf der Phasenumwandlung von Zinkterephthalaten und ermöglichte die Laborsynthese von MOF-5 in 100 g-Mengen. Ein zweites Verfahren bedient sich des Strukturaufbaus mit Hilfe vorgefertigter anorganischer Cluster, wodurch erstmals die Synthese von MOF-5-Homologen anderer Metalle als Zink gelang.

This thesis entails the utilisation of ab initio density functional theory (DFT) in conjunction with neutron and synchrotron spectroscopy to study the mechanical, vibrational, and dielectric response of metal-organic framework (MOF) materials at the molecular level. MOFs are crystalline materials with nanoscale porosity, which have garnered immense scientific and technological interest for a wide variety of innovative engineering applications. One part of the thesis involves using low-frequency lattice vibrations to characterise the various physical motions that are possible for framework materials. These collective modes detected at terahertz (THz) frequencies have been used to reveal a broad range of exciting possibilities. New evidence has been established to demonstrate that THz modes are intrinsically linked to anomalous elasticity underpinning gate-opening and pore-breathing mechanisms, and to shear-induced phase transitions and the onset of structural instability. The phenomenon of molecular rotor mechanisms and trampoline-like motions are also observed, along with the first experimental confirmation of coordinated shear dynamics. Additionally, a new method to characterise the effects of temperature, and hence thermally-induced structural amorphisation is reported. Finally, for the first time, the frequency-dependent (dynamic) dielectric response of MOF materials, across the extended infrared (IR) spectral region was reported. The results were obtained from experimental synchrotron radiation IR reflectivity and DFT to reveal the low-к dielectric response of MOFs and established structure-property trends that highlight them as promising systems for microelectronic device applications.

The metal-organic framework (MOF) compounds have witnessed rapid growth in the past decade and currently emerged as a highly unique area in the field of chemistry, materials science, and multiple branches of engineering. It presents applications in diverse fields such as gas sorption, catalysis, ionic conductivity, sensing etc. These compounds are built by the inorganic metal ions which are bridged by organic linkers to form extended structures. These compounds are mainly synthesized by either one-pot synthesis or in a sequential manner. In the former case, the inorganic metal ions and the respective organic linker are reacted together in a particular solvent or solvent mixture, whereas in the later case, a metalloligand is prepared by using the organic linker and the primary metal ion, which react with the secondary metal ion forming the desired structure. In this thesis, the synthesis of metal-organic framework compounds by one-pot synthesis as well as the sequential synthesis is presented. The structures of all the synthesized compounds have been determined by single crystal X-ray diffraction technique. The prepared compounds were employed in the study of sensing of nitroaromatic compounds, toxic metal ions and highly oxidizing anions. In addition, detailed studies of heterogeneous catalysis employing the prepared MOFs were investigated along with catalysis by metal nanoparticle incorporated within MOFs. In select cases, the labile nature of the lattice water molecules was established by performing in-situ single crystal to single crystal (SCSC) structural transformation studies. In addition, the proton conductivity and the magnetic behavior have also been studied. Chapter 1 of the thesis presents a brief overview on metal-organic framework compounds and summarizes its various important properties. In chapter 2, the synthesis, structure, and characterization of heterometallic metal-organic framework compounds using 2-mercaptonicotinic (H2mna) and Cu(I) / Ag(I) based two metalloligands, [Cu6(Hmna)6] and [Ag6(Hmna)2(mna)4](NH4)4 are presented. In chapter 3, we present the synthesis, structure and nitroaromatic sensing behavior of [Ag6(mna)6](NH4)6 metalloligand based heterometallic metal-organic framework compounds. In chapter 4, the synthesis, structure and Lewis acid catalytic behavior of 6-mercaptonicotinic acid based heterometallic metal-organic framework compounds are presented. In chapter 5, the stabilization of the palladium nanoparticles in the newly synthesized 1,10-phenanthroline based metal-organic framework compounds and their catalytic behavior is presented. In chapter 6, we present the synthesis, structure and the sensing behavior of hazardous chemicals such as toxic metal ions and highly oxidizing anions. In addition, the adsorption and desorption of synthetic dye molecules by the metal-organic framework compounds are also presented.

Two-dimensional conjugated metal-organic frameworks (2D c-MOFs) have recently emerged for potential applications in (opto-)electronics, chemiresistive sensing, and energy storage and conversion, due to their excellent electrical conductivity, abundant active sites, and intrinsic porous structures. However, developing ultrathin 2D c-MOF nanosheets (NSs) for facile solution-processing and integration into devices remains a great challenge, mostly due to unscalable synthesis, low yield, limited lateral size and low crystallinity. Here, we report a surfactant-assisted solution synthesis toward ultrathin 2D c-MOF NSs, including HHB-Cu (HHB=hexahydroxybenzene), HHB-Ni and HHTP-Cu (HHTP=2,3,6,7,10,11-hexahydroxytriphenylene). For the first time, we achieve single-crystalline HHB-Cu(Ni) NSs featured with a thickness of 4-5 nm (~8-10 layers) and a lateral size of 0.25-0.65 μm², as well as single-crystalline HHTP-Cu NSs with a thickness of ~5.1±2.6 nm (~10 layers) and a lateral size of 0.002-0.02 μm². Benefiting from the ultrathin feature, the synthetic NSs allow fast ion diffusion and high utilization of active sites. As a proof of concept, when serving as a cathode material for Li-ion storage, HHB-Cu NSs deliver a remarkable rate capability (charge within 3 min) and long-term cycling stability (90% capacity retention after 1000 cycles), superior to the corresponding bulk materials and other reported MOF cathodes.

Metal–organic frameworks (MOFs) are emerging as an appealing class of highly tailorable electrically conducting materials with potential applications in optoelectronics. Yet, the realization of their proof-of-concept devices remains a daunting challenge, attributed to their poor electrical properties. Following the authors’ recent report on a semiconducting Fe₃(THT)₂(NH₄)₃ (THT: 2,3,6,7,10,11-triphenylenehexathiol) 2D MOF with record-high mobility and band-like charge transport, here, Fe₃(THT)₂(NH₄)₃ MOF-based photodetector operating in photoconductive mode capable of detecting a broad wavelength range from UV to NIR (400–1575 nm) is demonstrated. The narrow IR bandgap of the active layer (≈0.45 eV) constrains the performance of the photodetector at room temperature by band-to-band thermal excitation of charge carriers. At 77 K, the device performance is significantly improved; two orders of magnitude higher voltage responsivity, lower noise equivalent power, and higher specific detectivity of 7 × 10⁸ cm Hz¹/² W⁻¹ are achieved under 785 nm excitation. These figures of merit are retained over the analyzed spectral region (400–1575 nm) and are commensurate to those obtained with the first demonstrations of graphene and black phosphorus based photodetectors. This work demonstrates the feasibility of integrating conjugated MOFs as an active element into broadband photodetectors, thus bridging the gap between materials’ synthesis and technological applications.

No description available.

Mesoporous MOFs are currently record holders in terms of the specific surface area with values exceeding 7000 m2 gˉ¹, a textural feature unattained by traditional porous solids such as zeolites, carbons and even by graphene. They are promising candidates for high pressure gas storage and also for conversion or separation of larger molecules, whose size exceeds the pore size of zeolites. The rational strategies for synthesis of mesoporous MOF are outlined and the unambiguous consistent assessment of the surface area of such ultrahighly porous materials, as well as present challenges in the exciting research field, of mesoporous MOFs are discussed. The crystallinity, dynamic properties, functional groups, and wide range tunability render these materials as exceptional solids, but for the implementation in functional devices and even in industrial processes several aspects and effective characteristics (such as volumetric storage capacities, recyclability, mechanical and chemical stability, activation) should be addressed.

A new tool (Infrasorb-12) for the screening of porosity is described, identifying high surface area materials in a very short time with high accuracy. Further, an example for the application of the tool in the discovery of new cobalt-based metal–organic frameworks is given. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.