The diploma thesis is focused on the preparation and optimization of molecularly imprinted polymers (MIP) selective for chymotrypsinogen A as well as on the use of these MIP as recognition entities in the sensor. MIP was prepared by suspension polymerization using a mixture of functional methacrylate-based monomers. Prepared MIP was optimized (e.g. binding properties, selectivity and isolation of chymotrypsinogen from a complex matrix of human breath) by capillary electrophoresis with fluorescence detection ( = 532 nm). Finally, the combination of MIP with quartz microbalances was demonstrated as a promising sensor for the detection of proteins from human breath condensate.

<div> Here, the quartz crystal microbalance with dissipation monitoring (QCM-D) is employed to explore the interaction of the various free oxidant species with condensed PA model membranes in order to improve our understanding of how the interaction with these species affects rates of membrane chlorination and alter membrane structure. Molecular-scale mass uptake and changes in the dissipative nature of the of the model membranes as measured by the QCM is correlated to performance changes in interfacially polymerized PA reverse osmosis (RO) membranes. Leveraging newly gained insights from these measured interactions, new strategies are explored to improve flux and chlorine resistance using novel membrane structure and chemistry.<br></div>

This work deals with investigation of intercalation of alkaline metals in electrochromic devices by the help of the quartz crystal microbalance method. The general aim is to investigate the influence of molar mass and resistance on properties of vanadium pentoxide and tungsten trioxide electrochromic films. The main measuring method used for investigating of interacalation of sodium and lithium ions into these films is the cyclic voltammetry. Drawn graphs reveals that sodium and lithium ions shows different qualities during intercalation, particularly in participation of solvent, therefore, in the influence of molar mass and in structural changes in the films.

Dynamic Combinatorial Chemistry (DCC) is a recently introduced supramolecular approach to generate dynamically interchanging libraries of compounds. These libraries are made of different building blocks that reversibly interact with one another and spontaneously assemble to encompass all possible combinations. If a target molecule, for instance a receptor is added to the system and one or more molecules show affinity to the target species, these compounds will, according to Le Châtelier´s principle, be amplified on the expense of the other non-bonding constituents. To date, only a handful of different systems and formats have been used. Hence, to further advance the technique, especially when biological systems are targeted, new reaction types and new screening methods are necessary. This thesis describes the development of reversible sulfur reactions, thiol/disulfide interchange and transthiolesterification (the latter being a new reaction type for DCC), as means of generating reversible covalent bond reactions. Two different types of target proteins are used, enzymes belonging to the hydrolase family and the plant lectin Concanavalin A. Furthermore, two new screening/analysis methods not previously used in DCC are also presented; the quartz crystal microbalance (QCM)-technique and catalytic self-screening. / QC 20101118

Post-combustion CO2 capture is a promising approach for complementing other strategies to mitigate climate change. Liquid absorption is currently used to capture CO2 from post-combustion flue gases. However, the high energy cost required to regenerate the liquid absorbents is a major drawback for this process. As a result, solid sorbents have been investigated extensively in recent years as alternative media to capture CO2 from flue gases. For example, metal organic frameworks (MOFs) are nanoporous materials that have high surface areas, large pore volumes, and flexible designs. A large number of MOFs, however, suffer from 1) low CO2 adsorption capacity at low pressure, which is the typical condition for flue gases, 2) degradation upon exposure to water present in flue gases, and 3) low selectivity of CO2 when present in a mixture of gases. Zeolitic Imidazolate Frameworks (ZIFs) are heavily investigated MOFs for CO2 sorption applications because they have better selectivity for CO2 compared to other MOFs and are resistant to degradation in water due to their hydrophobic nature. However, ZIFs (e.g., ZIF-8) investigated for CO2 sorption applications are typically produced using toxic solvents and their CO2 sorption capacity is drastically lower than other types of MOFs. Post-synthesis modifications with amine functional groups have been known to increase CO2 sorption capacity and selectivity within nanoporous materials. For ZIFs, previous research showed that sufficient loading with linear polyethyleneimine increased their CO2 sorption capacity. Therefore, the objectives of this research were to a) investigate the CO2 sorption capacity of ZIF-8 synthesized by solvothermal methods that use more eco-friendly solvents (e.g., methanol and water) and b) introduce post-synthetic modifications to ZIF-8 using branched polyethyleneimine (bPEI) to enhance its sorption capacity. A custom quartz crystal microbalance (QCM) system was assembled and used to measure the CO2 sorption capacity of unmodified and bPEI-modified ZIF-8 sorbent. The tests were conducted at 0.3 - 1 bar. The results showed that the unmodified ZIF-8 synthesized in methanol (ZIF-8-MeOH) had comparable crystal structure, thermal stability, surface area, and chemical properties to that of literature (Ta et.al 2018). ZIF-8-MeOH had a surface area of 1300 m2/g and a CO2 sorption capacity of 0.85 mmol CO2/g ZIF-8 @ 1 bar. This surface area and sorption capacity are comparable to those of ZIF-8 made in dimethylformamide (DMF). Therefore, ZIF-8-MeOH proved to be a worthy candidate MOF for replacing the ZIF-8 made in DMF for CO2 capture research. Water-based ZIF-8 was also synthesized in this study; however, its CO2 sorption capacity was not tested because it exhibited a significantly lower surface area (732 m2/g) compared to that of ZIF-8-MeOH. Modification of the ZIF-8-MeOH with bPEI resulted in a decrease in its CO2 sorption capacity. This undesired outcome is likely a result of insufficient bPEI load (mass attached), on ZIF-8-MeOH (~ 10% w/w) combined with the surface area lost (~ 770 m2/g) due to bPEI blocking some of the ZIF-8-MeOH pores. Therefore, the bPEI load attained in this study was not enough to compensate for the loss of surface area of the modified ZIF-8 and thus, the CO2 sorption capacity decreased. Future investigations should enhance the post-synthetic modification by increasing the loading of amine functional groups onto the eco-friendlier ZIF-8-MeOH used in this study.

Interactions between biomolecules and cellulose films at solid/liquid interfaces was studied by surface plasmon resonance spectroscopy (SPR), quartz crystal microbalance with dissipation monitoring (QCM-D) and in situ atomic force microscopy (AFM) measurements. This dissertation shows the porous character of nanocrystalline cellulose films as the key feature for enhanced adsorption of chemically modified polysaccharides and provides quantitative analysis of polymer supported phospholipid structures as a stable platform for studying membrane-related processes. Smooth cellulose I films were prepared by spincoating cellulose nanocrystal suspensions onto positively charged self-assembled monolayers on gold. The adsorption of pullulan cinnamate (PC) onto cellulose surfaces increased with increasing degree of cinnamate substitution. The interactions between PCs with higher degree of substitution (DS) and porous nanocrystalline cellulose (NC) films presumably generated looped multilayer PC structures that adsorbed more than twice as much onto NC films than onto regenerated cellulose (RC) films. PC chains not only covered the NC surface but also penetrated into the porous film. The porous features of NC film are responsible for the greater adsorption of polymer chains relative to tightly packed RC films. Adsorption of phospholipid vesicles onto RC and NC films was also studied. Aggregates of intact vesicle were observed on NC surfaces with high water content ~ 84 % by mass. Phospholipid patches with smooth features were found to assemble onto RC surfaces with a lower degree of hydration ~ 30 % by mass. Vesicle membrane breakage was triggered by a destabilizing agent, LysoPC. The great mass decrease, and changes in dissipation and degree of hydration for phospholipid structures after exposure to LysoPC corresponded to the transformation from vesicles to layered structures. Initial binding of LysoPC micelles to unruptured vesicles was clearly resolved in SPR, whereas the huge mass decrease associated with bound water hides the initial adsorption of LysoPC onto vesicles in QCM-D experiments. The intitial binding of LysoPC micelles onto vesicle membranes lasted for 200 seconds with a maximal increase of 14 % by mass prior to vesicle collapse. The role of cholesterol in phospholipid interactions with model cellulose surfaces was also considered. Supported vesicle layers over RC surfaces were observed for vesicle membranes containing ≥ 6.3 % by mole cholesterol, whereas phospholipid or phospholipid with lower cholesterol content formed disconnected lipid islands on RC surfaces. Meanwhile, intact vesicles were always observed on NC surfaces for phospholipid/cholesterol blends regardless of the cholesterol content. The intact vesicles on cellulose surfaces were attributed to the ability of cholesterol to accommodate vesicle deformation. These studies showed the impact of mesoscale structure of cellulose films on adsorbates. It sheds light on the role of the lignin-carbonhydrate-complex in plant cell wall structure and will inform the next generation of biomimetic nanocomposites. The designed polymer supported biomimetic membranes provide a perfect platform to develop intact and ruptured protoplast systems for the study of plant cell wall self-assembly. / Ph. D.

Organic materials exhibiting second-order non-linear optical (NLO) properties are a key to the development of advanced electro-optic (EO) modulators used in fiber-optic communications system. This work addresses the fabrication and characterization of organic materials with NLO properties using a self-assembly approach by alternately dipping a charged substrate into positively and negatively charged polymers to build up layer-by-layer (LbL) films. The effect of solution pH on the formation of LbL films fabricated using the polycation poly(allylamine hydrochloride) (PAH) and the polyanion poly{1-[p-(3–-carboxy-4–-hydroxyphenylazo)benzenesulfonamido]-1,2-ethandiyl} (PCBS) was studied using a quartz crystal microbalance with dissipation (QCM-D) monitoring, ellipsometry, absorbance, and second harmonic generation (SHG) measurements. PCBS has an azo-benzene chromophore side group that, when sufficiently oriented, results in measurable SHG. Films of PAH/PCBS fabricated at neutral pH where both PAH and PCBS are highly charged led to thin bilayers, ~1 nm, with a 1:1 molar ratio of PCBS:PAH. This molar ratio was found to be important for long-range polar ordering of PCBS in these films. Increasing the rate of convection was found to reduce the time required for complete adsorption of the polyion. This can have a significant impact on fabrication of films with high bilayer numbers. A variation of the above technique, which involves adsorbing one of the constituents electrostatically and another covalently, was studied using PAH and a reactive dye, Procion Brown (PB), which has a significantly higher hyperpolarizability than PCBS. It was found that a high pH, ~10.5, was important for achieving covalent attachment of the PB to the underlying PAH films. This resulted in much higher SHG intensities compared to when PB was deposited pH at 8.5-9.5 where the attachment of PB was due to a combination of electrostatic and covalent interactions. QCM-D results for PAH/PB films revealed the presence of a high percentage of unreacted amine groups in the underlying PAH film. A rate constant value for PB attachment step to the underlying PAH was also calculated. To enhance the SHG intensity of these films, silver nanoprisms were synthesized and deposited onto films using physisorption. An enhancement in the SHG intensity was observed for both PAH/PCBS and PAH/PB films. / Ph. D.

As two of the most abundant natural polymers, chitin and lignin not only play critical roles in fungal and plant cell walls but are also important functional materials and promising feedstocks for a variety of chemicals. This study investigated the interactions of chitin and lignin thin films with several other molecules via a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). Interactions between chitin and family 18 chitinases are vital for understanding bacterial invasion of fungi and human defense against fungal infection. Regenerated chitin (RChitin) thin films were prepared via chemical conversion and spin-coating. Changes in their mass and viscoelasticity were monitored by a QCM-D in real time during incubation with family 18 chitinases. The optimal temperature for the activity of chitinases on surfaces was lower than bulk solution studies in the literature. Family 18 chitinases showed greater activity on dissolved chitin oligosaccharides while family 19 chitinases showed greater activity on RChitin films, which was attributed to chitin-binding domains in family 19 chitinases. Catechyl lignin (C-lignin) is a promising substrate for lignin valorization. Films of C-lignin were synthesized via adsorbed horseradish peroxidase-catalyzed dehydrogenative polymerization (DHP) of caffeyl alcohol (C-alcohol), and degraded through Fenton chemistry with all processes observed by a QCM-D and AFM. The synthetic rate and yield for C-DHP films was lower than DHP films made from coniferyl alcohol (G-alcohol) and p-coumaryl alcohol (H-alcohol). The C-DHP film underwent complete Fenton mediated degradation in contrast to the G-DHP and H-DHP films regardless of their thicknesses. Conventional lignin suffers from recalcitrance to degradation. Copolymer lignin films were synthesized through surface-initiated copolymerization of C and G or C, G and H monolignols. As the concentration of C-alcohol increased, the percentage degradation of the synthesized DHP copolymer films increased. Almost all the CG-DHP or CGH-DHP films were degraded when the percentage of the C-alcohol in the polymerization feed was ≥ 75% and ≥ 60% for CG-DHP and CGH-DHP, respectively. / Doctor of Philosophy / Natural polymers are widely considered as an alternative to fossil fuels for the production of biofuels, biochemicals, and biomaterials. The features of their biodegradability, biocompatibility, and sustainability can significantly alleviate concerns about environmental pollution and energy security. The surfaces of natural polymers are critical to their properties and applications. This dissertation focuses on the study of interfacial behaviors occurring at two of the most abundant natural polymers, chitin and lignin, via surface analysis techniques, a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). When an endosymbiont bacteria enter a fungal host, they secrete chitinases to soften and loosen the chitin layer in the fungal cell wall. Small chitin fragments will be released from digestion of the chitin layer of the fungal cell wall by chitinases in humans suffering from fungal infections. In order to fully understand the interactions between the fungal chitin layer and chitinases, a chitin thin film was fabricated to mimic the chitin layer, and the changes of the chitin film in mass, viscoelasticity, and morphology during treatment with family 18 chitinases were studied at various temperatures and pH using a QCM-D and AFM. Family 19 chitinases produced greater degradation of chitin thin films than family 18 chitinases, even though the family 18 chitinases had greater activity in solution. Greater surface activity for family 19 chitinases were attributed to chitin-binding domains in their chemical structure that are absent in family 18 chitinases. Millions of tons of lignin are produced in the lignocellulosic biorefinery and are discarded every year due to their recalcitrance to degradation as a result of their heterogeneous and complex structure. A newly discovered lignin, catechyl lignin (C-lignin), has potential for enhancing degradation on account of its simple linear structure. In this dissertation, C-lignin thin films were synthesized on gold-coated QCM-D sensor surfaces via surface-initiated dehydrogenative polymerization of caffeyl alcohol (C-alcohol). Their enzymatic and chemical degradation was investigated. It was found that the C-lignin films underwent complete chelator-mediated Fenton degradation in contrast to conventional lignin films. Although the C-lignin promises to be an ideal substrate for lignin valorization, its narrow distribution in nature severely limits its wide application. In view of this limitation, some people are trying to incorporate C units into conventional lignin through genetically engineered plants. This dissertation demonstrates the successful copolymerization of C-alcohol with conventional monolignols and the improved degradation of the synthesized C unit-containing copolymer lignin films relative to conventional lignin films. The results are expected to inform the design of lignocellulosic biomass for greater utilization.

Natural and synthetic polymers are highly related to people's daily life in every perspective and determine everyone's life quality. This study investigated the interactions between polymer thin films and other molecules, specifically natural polymer films with other components in plant and fungal cell walls, crosslinked thermoplastic films with solvent molecules, as well as commodity thermoplastic films with air and moisture during aging by a powerful surface analysis instrument, a quartz crystal microbalance with dissipation monitoring (QCM-D). The assembly and interactions of glucan and chitin are crucial for understanding the fungal infection mechanism. Adsorption of mixed-linkage glucan (MLG) onto regenerated chitin (RChitin) and cellulose (RC) surfaces were investigated by QCM-D and atomic force microscopy (AFM). MLG was irreversibly adsorbed onto both surfaces and formed soft hydrogel-like layers with viscoelastic properties. This work established a QCM-D method to mimic the assembly of natural polymers in fungal cell walls and provided insight into the interactions of these polymers with chitin and cellulose. Poly(ether imide) (PEI) has poor solvent resistance towards solvents including chloroform, dimethylformamide (DMF), dichloromethane (DCM), and N-methyl pyrrolidone (NMP). Exposure to these solvents severely affects the thermal and mechanical performances of PEI. Therefore, crosslinked PEI (X-PEI) films was prepared from azide-terminated PEI (N₃-PEI-N₃) via a thermal crosslinking reaction. X-PEIs maintain outstanding solvent resistance towards common solvents by swelling ratio tests using QCM-D. Meanwhile, the thermal and mechanical properties of X-PEI were enhanced compared to the original PEI. Photo-oxidation is one of the dominant degradation mechanisms affecting the lifespan of polymers. The effect of photooxidative aging on the physiochemical properties of low-density polyethylene (LDPE) films were investigated using QCM-D, differential scanning calorimetry (DSC), and tensile stress-strain tests. The crystallinity, mechanical properties, and weight loss were correlated to understand the aging behavior. Materials after aging showed higher tensile stress and modulus, with reduced mass and elongation properties. Particularly, the aging-induced damage of polymer chain integrity was first determined by QCM-D through the evolution of mass loss during aging, providing supports to the changes of mechanical properties under aging. / Doctor of Philosophy / Natural polymers and thermoplastics are two major materials that are highly related to modern life. The interactions of these polymers with other molecules are important research topics for people to understand and predict the material properties. This dissertation studied the following three topics using a quartz crystal microbalance with dissipation monitoring (QCM-D): 1) interactions between plant natural polymer films and polymers in fungal cell wall; 2) solvent resistance of crosslinked thermoplastic films; and 3) physiochemical changes during photo-oxidation degradation of thermoplastic films. Pathogenic fungal cells can attack beneficial plant cell hosts by adhering themselves onto the plant cells, followed by penetration and enzymatic degradation of the multilayered plant cell walls until the host is digested. Therefore, the interaction between the components in fungal and plant cell walls is critical to understand pathogenic fungal cell invasion. Adsorption of mixed-linkage glucan (MLG) onto regenerated chitin (RChitin) and cellulose (RC) surfaces was monitored by QCM-D and atomic force microscopy (AFM). An irreversible binding interaction of MLG with chitin and cellulose films and a soft hydrogel-like layer on both surfaces were observed in our work. Poly(ether imide) (PEI) is a high-performance polymer with excellent thermal and mechanical properties. However, the good solubilities in common organic solvents that facilitate reasonable processibility limits its applications in solvent-related domains. Several methods of PEI crosslinking were developed in the literature to improve solvent resistance. This study prepared crosslinked PEI (X-PEI) films from azide-terminated PEI (N₃-PEI-N₃) via a simple thermal crosslinking reaction. X-PEI had better resistance to organic solvents from QCM-D measurements and maintained good thermal and mechanical performances. Photo-oxidation from air and sunlight slowly degrades plastics, shortens their service time, and leads to environmental pollution. This work bridged the gap between molecular integrity and its effect on the overall macroscopic mechanical changes through accurate measurement of the mass loss during degradation using a QCM-D. This work is essential in ensuring polymer design and active environmental protection.

Ionic liquids (ILs) present new approaches for controlling interactions at the solid-liquid interface. ILs are defined as liquids consisting of bulky and asymmetric ions, with a melting point below 373 K. Owing to their amphiphilic character they are powerful solvents but also possess other interesting properties. For example, ILs can self-assemble and are attracted to surfaces due to their charged nature. As a result, they are capable of forming nanostructures both in bulk and at interfaces. This thesis describes how the solid-IL interface responds to external influences such as elevated temperatures, the addition of salt and polarisation. An improved understanding of how these factors govern the surface composition can provide tools for tuning systems to specific applications such as friction. Normal and friction forces are measured for ethylammonium nitrate (EAN) immersed between a mica surface and a silica probe, at different temperatures or salt concentrations. The results demonstrate that an increase in temperature or low concentrations of added salt only induce small changes in the interfacial structure and that the boundary layer properties remain intact. In contrast, at sufficiently large salt concentrations the smaller lithium ion prevails and the surface composition changes. The interfacial layer of a similar IL is also investigated upon the addition of salt and the results reveal that lithium ions affect the surface composition differently depending on the ion structure of the IL. This demonstrates that the surface selectivity strongly depends on the ion chemistry. Remarkably, a repulsive double layer force manifests itself for EAN at 393 K, which is not observed for lower temperatures. This indicates a temperature dependent change in EAN’s microscopic association behaviour and has general implications for how ILs are perceived. A new method is developed based on a quartz crystal microbalance to investigate how the surface compositions of ILs respond to polarisation. The approach demonstrates that interfacial layers of both a neat IL and an IL dissolved in oil can be controlled using potentials of different magnitudes and signs. Furthermore, the method enables two independent approaches for monitoring the charges during polarisation which can be used to quantify the surface composition. The technique also provides information on ion kinetics and surface selectivity. This work contributes to the fundamental understanding of the solid-IL interface and demonstrates that the surface composition of ILs can be controlled and monitored using different approaches. / Jonvätskor möjliggör nya tillvägagångssätt för att kontrollera interaktioner vid gränsskiktet mellan fasta ytor och vätskor. Jonvätskor definieras som vätskor som består av stora och asymmetriska joner med en smältpunkt under 373 K. På grund av sin amfifila karaktär är de starka lösningsmedel men har också andra intressanta egenskaper. Jonvätskor kan till exempel självorganisera sig och attraheras till ytor på grund av sin laddning. En följd av detta är att de bildar nanostrukturer både i bulk och på ytor. Denna avhandling beskriver hur gränsskiktet mellan fasta ytor och jonvätskor svarar på yttre påverkan såsom en ökning i temperatur, tillsättning av ett salt samt polarisering. En ökad förståelse för hur dessa faktorer styr ytkompositionen av jonvätskor kan bidra med verktyg för att kontrollera system till specifika applikationer såsom friktion. Normala- och friktionskrafter mäts för etylammonium nitrat (EAN) mellan en glimmeryta och en kolloidprob vid olika temperaturer eller saltkoncentrationer. Resultaten visar att en ökning av temperatur eller låga koncentrationer av tillsatt salt bara marginellt framkallar ändringar i strukturen på gränsytan och att det adsorberade lagret förblir intakt. När saltkoncentrationen emellertid var tillräckligt hög får den mindre litiumjonen överhanden och ytsammansättningen ändras. Ytlagret av en liknande jonvätska undersöks också vid tillsättning av salt och resultaten avslöjar att litiumjoner påverkar ytsammansättningen annorlunda beroende på jonstrukturen av jonvätskan. Detta visar att ytselektiviteten starkt beror på jonkemin. En repulsiv dubbellagerkraft yttrar sig anmärkningsvärt för EAN vid 393 K vilket inte observeras vid lägre temperaturer. Detta indikerar en ändring i EANs mikroskopiska sammansättningsbeteende och har generella återverkningar för hur jonvätskor uppfattas. En ny metod har utvecklats baserad på en kvartskristall mikrovåg för att undersöka hur ytsammansättningen av jonvätskor reagerar på polarisering. Denna metod visar att det adsorberade lagret av både en ren jonvätska och en jonvätska löst i olja kan kontrolleras genom att applicera spänningar med olika tecken och storlekar. Dessutom möjliggör metoden två oberoende tillvägagångssätt för att övervaka laddningarna under polarisering vilket kan användas för att kvantifiera ytsammansättningen. Tekniken ger också information om jonkinetik och ytselektivitet. Detta arbete bidrar till den grundläggande förståelsen av gränsskiktet mellan fasta ytor och jonvätskor och visar att ytsammansättningen av jonvätskor kan kontrolleras och övervakas med olika tillvägagångssätt. / <p>QC 20160518</p>