Global ETD Search

1	Development of stirred well filtration as a high-throughput technique for downstream bioprocessing Kazemi, Amir Sadegh 11 1900 (has links) Micro-scale processing (MSP) techniques are miniaturized version of upstream and downstream conventional unit operations that are designed to accelerate the pace of bioprocess design and development. Previous ‘dead end’ filtration studies have demonstrated the usefulness of this concept for membrane filtration processes. However, these experiments were performed without stirring which is the most common strategy to control the effects of concentration polarization and fouling on filtration performance. In this work, the pressure-driven stirred conditions of a conventional stirred-cell module were integrated with a 96-well filter plate to develop a high throughput technique called ‘stirred-well filtration’ (SWF). The design allowed for up to eight constant flux filtration experiments to be conducted at once using a multi-rack programmable syringe pump and a magnetic lateral tumble stirrer. An array of pressure transducers was used to monitor the transmembrane pressure (TMP) in each well. The protein sieving behavior and fouling propensity of Omega™ ultrafiltration membranes were assessed via a combination of hydraulic permeability measurements and protein sieving tests in constant filtrate flux mode. The TMP profile during filtration of bovine serum albumin (BSA) solution was strongly dependent on the stirring conditions – for example the maximum TMP in the stirred wells were an average of 7.5, 3.8, and 2.6 times lower than those in the unstirred wells at filtrate fluxes of 12, 36, and 60 LMH (5, 15, and 25 μL/min) respectively. The consistency of the data across different wells for the same stirring condition was very good. To demonstrate the effectiveness of the SWF technique, the eight tests for a simple 2^2 factorial design-of-experiments (DOE) test with duplicates was run to evaluate the effect of solution pH and salt concentration on protein filtration. The combination of SWF with statistical methods such as DOE is shown to be an effective strategy for high-throughput optimization of membrane filtration processes. / Dissertation / Master of Applied Science (MASc) Microscale processing High-throughput testing Downstream bioprocessing Stirred well filtration (SWF) BSA filtration Micromixing Fouling test Omega™ membrane
2	Development of High-throughput Membrane Filtration Techniques for Biological and Environmental Applications / Development of High-throughput Membrane Filtration Techniques Kazemi, Amir Sadegh 11 1900 (has links) Membrane filtration processes are widely utilized across different industrial sectors for biological and environmental separations. Examples of the former are sterile filtration and protein fractionation via microfiltration (MF) and ultrafiltration (UF) while drinking water treatment, tertiary treatment of wastewater, water reuse and desalination via MF, UF, nanofiltration (NF) and reverse-osmosis (RO) are examples of the latter. A common misconception is that the performance of membrane separation is solely dependent on the membrane pore size, whereas a multitude of parameters including solution conditions, solute concentration, presence of specific ions, hydrodynamic conditions, membrane structure and surface properties can significantly influence the separation performance and the membrane’s fouling propensity. The conventional approach for studying filtration performance is to use a single lab- or pilot-scale module and perform numerous experiments in a sequential manner which is both time-consuming and requires large amounts of material. Alternatively, high-throughput (HT) techniques, defined as the miniaturized version of conventional unit operations which allow for multiple experiments to be run in parallel and require a small amount of sample, can be employed. There is a growing interest in the use of HT techniques to speed up the testing and optimization of membrane-based separations. In this work, different HT screening approaches are developed and utilized for the evaluation and optimization of filtration performance using flat-sheet and hollow-fiber (HF) membranes used in biological and environmental separations. The effects of various process factors were evaluated on the separation of different biomolecules by combining a HT filtration method using flat-sheet UF membranes and design-of-experiments methods. Additionally, a novel HT platform was introduced for multi-modal (constant transmembrane pressure vs. constant flux) testing of flat-sheet membranes used in bio-separations. Furthermore, the first-ever HT modules for parallel testing of HF membranes were developed for rapid fouling tests as well as extended filtration evaluation experiments. The usefulness of the modules was demonstrated by evaluating the filtration performance of different foulants under various operating conditions as well as running surface modification experiments. The techniques described herein can be employed for rapid determination of the optimal combination of conditions that result in the best filtration performance for different membrane separation applications and thus eliminate the need to perform numerous conventional lab-scale tests. Overall, more than 250 filtration tests and 350 hydraulic permeability measurements were performed and analyzed using the HT platforms developed in this thesis. / Thesis / Doctor of Philosophy (PhD) / Membrane filtration is widely used as a key separation process in different industries. For example, microfiltration (MF) and ultrafiltration (UF) are used for sterilization and purification of bio-products. Furthermore, MF, UF and reverse-osmosis (RO) are used for drinking water and wastewater treatment. A common misconception is that membrane filtration is a process solely based on the pore size of the membrane whereas numerous factors can significantly affect the performance. Conventionally, a large number of lab- or full-scale experiments are performed to find the optimum operating conditions for each filtration process. High-throughput (HT) techniques are powerful methods to accelerate the pace of process optimization—they allow for multiple experiments to be run in parallel and require smaller amounts of sample. This thesis focuses on the development of different HT techniques that require a minimal amount of sample for parallel testing and optimization of membrane filtration processes with applications in environmental and biological separations. The introduced techniques can reduce the amount of sample used in each test between 10-50 times and accelerate process development and optimization by running parallel tests. Membrane filtration Ultrafiltration Downstream bio-processing High-throughput (HT) testing Wastewater treatment Hollow-fiber membranes Humic acids High-throughput filtration Design-of-experiments (DOE) Process optimization Microscale filtration Microfluidic flow control system Stirred well filtration SWF High-throughput hollow-fiber module HT-HF Constant TMP Constant flux Multi-modal filtration Bioseparation MMFC MS-PS-CFF PEG Dextran FITC-Dextran BSA DNA IgG α-lactalbumin Biomolecule separation Module hydrodynamics Concentration polarization Membrane fouling Micromixing Omega™ membrane Microscale processing Fouling test PVDF membrane Surface modification Polydopamine Membrane cleaning Membrane backwashing Sodium alginate Polyethersulfone PES Hydraulic permeability Membrane permeability ZeeWeed® membrane Filtration ionic strength Filtration pH Solution conditions Water treatment Environmental separations Biological separations

Search results

Development of stirred well filtration as a high-throughput technique for downstream bioprocessing

Development of High-throughput Membrane Filtration Techniques for Biological and Environmental Applications / Development of High-throughput Membrane Filtration Techniques