Made available in DSpace on 2014-12-17T14:19:56Z (GMT). No. of bitstreams: 1 GladsonOS_DISSERT.pdf: 1465879 bytes, checksum: 7f3375cba250acc2b517a0cef42f124f (MD5) Previous issue date: 2010-04-26 / Analysis of the northeastern sugar economy insertion on the modernization process of these economy based on the Jos? Lins do Rego literary Discourse. In order to do so, there were used the literary works Fogo Morto, Menino de Engenho, Bang?? and Usina as study objects. Throughout the prosecution of a exploratory and documental bibliographic research it was identified that, in the cited literary works, there are three specialties corresponding to the main scenarios of the plots, the Santa F? and Santa Rosa mills and the Bom Jesus mill factory. We have conceived the mills as main charachters, since all stories deployment corresponds to the other charachters reactions to the many forms that the specialties are, or not, affected by the modernization. Therefore, the narratives in Fogo Morto, Menino de Engenho, Bang?? and Usina reaffirm the viability of the literary discourse application as a source for the construction of the sociological interpretation of the northeastern sugar economy process of modernization in the end of 19th century and beginning of the 20th century / An?lise da inser??o da economia a?ucareira nordestina no processo de moderniza??o deste ramo de economia a partir do discurso liter?rio de Jos? Lins do Rego. Para isso, foram utilizadas as obras Fogo Morto, Menino de Engenho, Bang?? e Usina como objeto de estudo. Atrav?s da realiza??o de uma pesquisa bibliogr?fica de cunho explorat?rio e documental, identificou-se que, nos enredos dos romances, existem tr?s espacialidades correspondentes aos cen?rios principais das tramas, os engenhos Santa F? e Santa Rosa e a usina Bom Jesus. Concebemos os engenhos como protagonistas, uma vez que todo o desenrolar das hist?rias corresponde a rea??es dos demais personagens ?s diversas formas com que as especialidades s?o atingidas ou n?o pela moderniza??o. Portanto, as narrativas presentes em Fogo Morto, Menino de Engenho, Bang?? e Usina reafirmam a viabilidade da utiliza??o do discurso liter?rio enquanto fonte para a constru??o da interpreta??o sociol?gica do processo de moderniza??o da economia a?ucareira nordestina dos fins do s?culo XIX e in?cio do s?culo XX

O objetivo deste trabalho é aplicar a metodologia do Planejamento Integrado de Recursos energéticos (PIR) dentro do ambiente corporativo. Para estudo de caso foi escolhida uma indústria de papel e celulose, por se tratar de uma das indústrias de maior consumo energético, e a região onde ela está instalada, o município de Suzano. Inicialmente, procurou-se descrever o processo produtivo em uma indústria de papel e celulose. Para este trabalho foi analisado somente os recursos do lado da oferta. Além dos recursos tradicionais, que são a caldeira de biomassa, a caldeira de gás natural/óleo combustível e as caldeiras de recuperação, foi incluída uma nova tecnologia, a gaseificação de biomassa. Foram descritas as tecnologias de gaseificação disponíveis e mostrado o seu estado da arte. Dentro dessas tecnologias, há uma aplicação que busca substituir as tecnologias atuais de caldeira de recuperação, a gaseificação de licor negro. / The purpose of this study was to apply the Integrated Resources Planning for Energy (IRP) methodology within corporate environment. A study of case of pulp and mill industry was chosen, because it is one of largest energy consumption industries, and the region that was studied was Suzano. Initially we described the industrial process of pulp and mill factory. This study we will analyze only the features of Supply Side Resources. In addition to the traditional power supplies which are biomass boiler, natural gas/fuel oil boiler and recovery boiler, we include a new technology, biomass gasification. We described the technologies available for gasification and show the state of art of this technology. Within these technologies, we have an special application the seeks to replace currently technology of recovery boiler, Black Licor Gasification.

O objetivo deste trabalho é aplicar a metodologia do Planejamento Integrado de Recursos energéticos (PIR) dentro do ambiente corporativo. Para estudo de caso foi escolhida uma indústria de papel e celulose, por se tratar de uma das indústrias de maior consumo energético, e a região onde ela está instalada, o município de Suzano. Inicialmente, procurou-se descrever o processo produtivo em uma indústria de papel e celulose. Para este trabalho foi analisado somente os recursos do lado da oferta. Além dos recursos tradicionais, que são a caldeira de biomassa, a caldeira de gás natural/óleo combustível e as caldeiras de recuperação, foi incluída uma nova tecnologia, a gaseificação de biomassa. Foram descritas as tecnologias de gaseificação disponíveis e mostrado o seu estado da arte. Dentro dessas tecnologias, há uma aplicação que busca substituir as tecnologias atuais de caldeira de recuperação, a gaseificação de licor negro. / The purpose of this study was to apply the Integrated Resources Planning for Energy (IRP) methodology within corporate environment. A study of case of pulp and mill industry was chosen, because it is one of largest energy consumption industries, and the region that was studied was Suzano. Initially we described the industrial process of pulp and mill factory. This study we will analyze only the features of Supply Side Resources. In addition to the traditional power supplies which are biomass boiler, natural gas/fuel oil boiler and recovery boiler, we include a new technology, biomass gasification. We described the technologies available for gasification and show the state of art of this technology. Within these technologies, we have an special application the seeks to replace currently technology of recovery boiler, Black Licor Gasification.

The supervising teacher of the Thesis chose two bulidings to be the subject of solution, which were used as warehouses of cocoons. These are the biggest buildings of the premises as for the volume, which stand out for their impressing construction and their area (1493,1 & 1486,6 m2). The distance between them is aprox. 125 m. The systém of construction is the same in both the buildings, it is a wooden timber reinforced brick masonry frame in modular size of 3,6 x 6,15 m. The constructive height of street floor of building A is 4,4 m, building B 3,85 m. The clearence of bulinding A is 3,85 m and for building B 3,27m. The clearance of second floor in both objects is 4,84m. The existing inner staircase has one arm and is of 54 cm in width. There is a cargo lift on its … covered by … for the connecting the floor areas. … … of both the building forms together with wooden pillars elements also … . The windows of 160 cm width are set rytmicaly in three consecutive rows, they ensure max lighting of the interior of the buildings. The roofing of the buildings is made from wooden frame structure and covered by tiles. The roof construction is not covered from bottom and therefor they make an impression of one of the most striking elements in the interior. The clean dispositions, the lenght of the halls of 104 m to the adequate width, the clean construction both the brick and the wooden ones, together with impressive lighting, the all form an enormous value resulting in a unique character as a whole.