The subject of this diploma thesis is the project documentation of mixed-use building construction, located on Milady Horákové street in the city of Brno, a borough of Černá Pole. Five above-ground floors and one underground floor with an adjacent parking garage are designed. On the first above-ground floor, there are a café, snack bar and main entrances to the building. On the second floor, there are office spaces. On the third to fifth floors, there will be residential units. Above the garage, there is a green roof designed for recreation. The roof above the main building is green also, but it's accessible only for maintenance workers. Entrances for both people and cars are located on the south side of the house. The whole building has a basement. where walls and foundation slab are made of water-impermeable monolithic concrete. Bearing internal masonry is made of monolithic concrete. Both bearing and non-bearing masonry of above-ground floors are made of ceramic blocks. The front and shaft walls are made of plasterboard. The southern facade is designed as ventilated, the northern facade is designed by ETICS. The ceiling structures are of reinforced concrete monolithic slabs. Roofs are green and flat.

The purpose of the thesis is the processing of project documentation fot the construction design of the Mixed-use building in the city of Brno, a borough of Židenice. Underground and first floor are made of cast-in-place concrete. The vertical load-bearing structures of the second, third and fourth floor are designed from ceramic bricks of 300 mm thickness. Floor slabs in the whole building are made of cast-in-place concrete. The last floor has warm flat green roof. The building is designed so that the underground floor is largely made up of underground garages, oriented to the west. Basement of the building is used for technical background of the building too. The first and second above-ground floors are intended primarily fot trade and services, where the all kinds of the offices of the first two above-ground floors makes up to 75% of the floor area. The third and fourth floors are used for housing. The building is oriented from east to west.

The subject of the final thesis is creation of project documentation for construction of a mixed-use building. The main services of this building are housing, offices and small markets. The building is four-storey with a partial basement. The building is founded on strip foundations, load-bearing structures are made of concrete system Velox. The mixed-use building has roofing made like a flat green roof. The building is situated on parcel number 366/1 in city Letovice, cadastre unit Letovice (680711).

The diploma thesis focuses on a mixed-use building with a rectangle-shaped ground plan in Žilina city. The object is four-storey and with no basement. It is split into two sections. The first one provides a space for three operations in northeastern part of the first floor with an attached parking lot. These operations are not further described in this project and depending on investor´s requirements some changes may apply. The second part is an apartment housing section. The first floor contains utility rooms such as storage and buggy room. The housing sections are accessible with two entrances. The apartments are located from the second up to the fourth storey and are designed 1+KK, 2+KK,3+KK and 4+KK respectively. The apartments are assigned with parking spaces isolated from operations parking lot. Vertical bearing walls are made of clay blocks POROTHERM 30 AKU P+D, which are used also as internal bearing party. Internal bearing walls placed in apartments are made POROTHERM 25 AKU P+D and completed by POROTHERM 14 PROFI P+D. Walls will be placed on conrete and reinforced concrete strip foundation. Building has external thermal insulation made by EPS gray 200mm thick. Horizontal load-bearing structures are made by reinforced concrete. Object has flat roof with minimum slope 3%. Damp proof is made by PVC-P membrane. As thermal insulation is used mineral wool.

The topic of this diploma thesis is an elaboration of technical documentation for project of newly-built mixed-use building in Hlučín. Object is located on a quiet suburban area. The building has four floors and is designed from materials typical for our area. On the ground floor is shop and restaurant, on the floors are housing units. The house is covered with a hipped roof.

This diploma thesis deals with design documentation of New mixed-use building in Bruntál. The building is located in the centre of the Bruntál on the plot number 83/1. Regulatory plan defines this plot for construction. It is marked as SC – mixed-use residental plot. The building contains the main conditions of use – living, shopping, restaurant and administration. The building has 3 above-ground floors and 1 basement. At ground floor there is café and shop. At first floor there are offices and conference room. At second floor there are flats. In basement there is utility room, cellars, garage and storages. The café and shop is separated and has its own entrances. Horizontal and vertical load-bearing and non-load bearing structures are bulit of permanent formwork VELOX – perimeter load-bearing walls are sandwiches, internal load-bearing walls are of cast-in-place reinforced concrete, which is covered by permanent formwork. Non-load bearing walls are bulit of 2 boards of permanent formwork with inserted acoustic insulation. Vertical load-bearing structures are made of cast-in-place reinforced concrete, which is covered by permanent formwork. The building has concrete foundation strips and cast-in-place reinforced concrete stairs. The roof has got classical order of layers.

No description available.

The master thesis designs a low-energy mixed-use building in Dolní Kralovice. The thesis consists of three parts, architectural-construction part, environment technology of building and energy assessment report to a photovoltaic power plant. The building has two above-ground floors and a basement under part of the building. The basement includes sanitary facilities and utility room, ground floor includes a restaurant and small sports hall and first floor offices. The building is founded on reinforced concrete foundation slab and foundation pads. The vertical load-bearing structures are designed as a frame system with shear core. Horizontal load-bearing structures are designed as cast-in-place reinforced slabs. External wall is designed from aerated concrete blocks with and mineral wool insulation. The building has a flat roof. In the building is air condition and cooling system and heating is with geothermal heat pumps with a borehole collector. Part of electricity demand is covered by photovoltaics on the roof. The thesis was developed in Revit software.

The aim of the diploma thesis is to design new mixed-used building in Drásov. This building is situated on the outskirts of the town. The mixed-used building is design as detached building with four-storey and with partial basement. In the basement there are technical utilities, small storages and meeting room. On the firt floor there are commercial space as shoe store, sports equipment, household goods and hourer´s shop. On the second floor there are two separeted office premises. On the third and four floor there are eight flats. On the each foor there are four flats type 3+kk. Structural system of the building is design from ceramic masonry type Therm and from permanent formwork. There are ceilings from prestressed concerete floor slabs. The roof of the building is design as single-layer flat roof.

The subject of this thesis is the development of a project documentation of a mixed-use building situated in Kroměříž. The building has four above-ground floors and a basement. In the basement there are cellars, a workshop, a warehouse, a technical room and an underground garage. On the first floor there are shops, café with the capacity of twenty people and a pharmacy. There are also two handicap accessible apartments. The second to fourth floors are made out of residential units of which there are eight. The roof structure is designed as a warm flat green roof or terrace. The external and internal vertical structures are made out of Heluz ceramic pieces. Horizontal structures are made out of reinforced concrete.