Spelling suggestions: "subject:"molecularbeam epitaxial"" "subject:"amolecular epitaxial""
121 |
Perpendicular And Parallel Field Magnetoresistance In Molecular Beam Epitaxy Grown Bi2Te3Dey, Rik 18 September 2014 (has links)
The topological insulator Bi2Te3 has been grown on Si(111)-(7 × 7) surface by molecular beam epitaxy. Reflection high energy electron diffraction, in situ scanning tunnelling microscopy, x-ray photoelectron spectroscopy and ex situ x-ray diffraction studies have been performed to analyze the quality of the growth. These analyses suggest a very good layer-by-layer epitaxial growth of Bi2Te3 on the atomically at Si surface. The magnetoresistance of the samples has been studied with magnetic field perpendicular and parallel to the sample surface, up to 9 T, over a temperature range of 2 K to 20 K. A sharp dip at low fields (0 T - 1 T) and near-linear behavior for high fields (> 4 T) have been observed in the perpendicular field magnetoresistance. The low field dip is due to weak antilocalization that agrees well with the simplified Hikami-Larkin-Nagaoka model. It has been demonstrated that both the low field dip and the high field near-linear behavior can be explained by the original Hikami-Larkin-Nagaoka formula alone in a system with strong spin-orbit coupling. From the fitting of the perpendicular field magnetoresistance the phase coherence length, the mean free path and the spin-orbit relaxation time have been estimated. The phase coherence length shows power law dependence with temperature indicating two dimensional nature of the transport. The power law also suggests electron electron interaction as the prominent dephasing mechanism. The out-of-plane spin-orbit relaxation time is determined to be small and the in-plane spin-orbit relaxation time is found to be comparable to the momentum relaxation time. The estimation of these charge and spin transport parameters is useful for topological insulator based magneto electric device applications. It also has been shown that the strong spin-orbit coupling suppresses the Zeeman contribution in perpendicular field magnetoresistance. The logarithmic divergence of perpendicular field magnetoresistance with temperature for low temperature range (2 K - 20 K) at high fields shows the presence of Coulomb interaction in the spin singlet channel. For magnetoresistance with the field parallel to the sample surface, the observed magnetoresistance has parabolic dependence for small fields (0 T - 0.6 T) and logarithmic dependence for large fields (> 3 T), which is due to the Zeeman effect. It is found that the data are inconsistent with only the Maekawa and Fukuyama theory of non interacting electrons with Zeeman contributions to the transport, but are consistent with theory if one also takes into account the electron electron interaction and the Zeeman splitting term in the electron electron interaction theory of Lee and Ramakrishnan. The Zeeman g-factor and the strength of Coulomb scattering due to electron electron interaction have been estimated from fitting of the parallel field magnetoresistance. The magnetoresistance also shows anisotropy with respect to the field directions. The angle dependent anisotropic magnetoresistance can be fitted well by the original HLN theory alone. The anisotropy can have potential application in anisotropic magnetic sensors. / text
|
122 |
Thermoelectric properties of Si-based two dimensional structuresAgan, Sedat January 2000 (has links)
No description available.
|
123 |
Issues concerning the use of H and Sb surfactant in Si and Siâ†1â†-â†xGeâ†X MBELambert, Andrew David January 2000 (has links)
No description available.
|
124 |
Growth techniques and characterisation of Siâ†1â†-â†xGeâ†x heterostructures for pMOS applicationsGrasby, Timothy John January 2000 (has links)
No description available.
|
125 |
Dynamics and Kinetics of Si/Siâ†(â†1-â†xâ†)Geâ†(â†xâ†) MBE studies by reflectance spectroscopyLees, Anna January 1998 (has links)
No description available.
|
126 |
Lattice Engineering of III-Nitride Heterostructures and Their ApplicationsKong, Wei January 2016 (has links)
<p>III-Nitride materials have recently become a promising candidate for superior applications over the current technologies. However, certain issues such as lack of native substrates, and high defect density have to be overcome for further development of III-Nitride technology. This work presents research on lattice engineering of III-Nitride materials, and the structural, optical, and electrical properties of its alloys, in order to approach the ideal material for various applications. We demonstrated the non-destructive and quantitative characterization of composition modulated nanostructure in InAlN thin films with X-ray diffraction. We found the development of the nanostructure depends on growth temperature, and the composition modulation has impacts on carrier recombination dynamics. We also showed that the controlled relaxation of a very thin AlN buffer (20 ~ 30 nm) or a graded composition InGaN buffer can significantly reduce the defect density of a subsequent epitaxial layer. Finally, we synthesized an InAlGaN thin films and a multi-quantum-well structure. Significant emission enhancement in the UVB range (280 – 320 nm) was observed compared to AlGaN thin films. The nature of the enhancement was investigated experimentally and numerically, suggesting carrier confinement in the In localization centers.</p> / Dissertation
|
127 |
Synthesis and Properties of GaAs1-xBix Prepared by Molecular Beam EpitaxyLi, Jincheng January 2016 (has links)
<p>GaAs1-xBix is a III-V semiconductor alloy which has generated much fundamental scientific interest. In addition, the alloy possesses numerous device-relevant beneficial characteristics. However, the synthesis of this material is very challenging and its properties are not well understood. The focus of this dissertation is to advance the understanding of its synthesis using molecular beam epitaxy (MBE) and, as a result, improve its key as-grown properties that are of great importance to device applications, such as increasing Bi concentration in the alloy and enhancing its optical emission efficiency.</p><p>In chapter 3, the discovery of a trade-off between the structural and optical characteristics of GaAs1-xBix , controlled by the degree to which the growth is kinetically-limited, is described. Chapter 4 discusses the exploitation of a growth method that utilizes the spatial distribution of MBE fluxes to facilitate numerous studies of the critical dependence of GaAs1-xBix characteristics on the V/III flux ratio. Chapter 5 describes the results of experiments utilizing vicinal substrates to modify both Bi incorporation and optical emission efficiency of synthesized GaAs1-xBix and enable new understanding of the Bi incorporation mechanism. Specifically, incorporation primarily at A steps, defined as the steps generated by misorienting the GaAs (001) substrate toward the (111)A surfaces, enhances Bi incorporation but reduces optical emission efficiency. Chapter 6 describes the identification of two new signatures in the Raman spectra of GaAs1-xBix that can be used to determine the Bi content and the hole concentration of nominally undoped GaAs1-xBix. Finally, in Chapter 7 the GaAs1-xBix growth using pulsed Ga fluxes is described. The use of pulsed-growth significantly modifies the incorporation of Bi and suggests it is a promising method for widening the GaAs1-xBix MBE growth window enabling improved synthesis control and materials properties.</p> / Dissertation
|
128 |
Light-Matter Interactions in Various Semiconductor SystemsZandbergen, Sander, Zandbergen, Sander January 2017 (has links)
Semiconductors provide an interesting platform for studying light-matter interactions due to their unique electrically conductive behavior which can be deliberately altered in useful ways with the controlled introduction of confinement and doping, which changes the electronic band structure. This area of research has led to many important fundamental scientific discoveries that have in turn spawned a plethora of applications in areas such as photonics, microscopy, single-photon sources, and metamaterials. Silicon is the prevalent semiconductor platform for microelectronics because of its cost and electrical properties, while III-V materials are optimal for optoelectronics because of the ability to engineer a direct bandgap and create versatile heterojunctions by growing binary, ternary, or quaternary compounds.
|
129 |
Epitaxial growth and optical properties of Mg3N2, Zn3N2, and alloysWu, Peng 24 April 2019 (has links)
Zinc nitride and magnesium nitride are examples of the relatively unexplored II3V2 group of semiconductor materials. These materials have potential applications in the electronics industry due to their excellent optical and electrical properties. This study mainly focuses on the growth and characterization of the new semiconductor materials: zinc nitride, magnesium nitride, and their alloys.
The (100) oriented zinc nitride thin films were grown on both (110) sapphire substrates and (100) MgO substrates by plasma-assisted molecular beam epitaxy (MBE). The typical growth rate is in the range of 0.02-0.06 nm/s, the growth temperature is in the range of 140-180 oC, and background nitrogen pressure is around 10-5 Torr. The growth process was monitored by in-situ: reflection high energy electron diffraction (RHEED) and optical reflectivity. The RHEED and X-ray diffraction patterns of the zinc nitride indicate that the film is a single crystal material. The in-situ optical reflectivity pattern of the zinc nitride shows interference oscillations, and these oscillations are damped out as the thickness increases. The reflectivity as a function of time was accurately simulated by an optical equation. The optical constants of the thin films, the growth rate, and the thickness were derived from the simulation of the in-situ reflectance. The X-ray diffraction shows that (400) oriented zinc nitride thin films were grown on both A-plane (110) sapphire substrates and (100) MgO substrates. Optical transmittance measurements were performed on the zinc nitride thin films. The spectrum of the zinc nitride transmittance indicates that zinc nitride has a high optical absorption in the visible light region. The absorption coefficient was calculated from the transmittance spectrum, and the optical band gap of the zinc nitride thin film was found to be 1.25-1.28 eV. Ellipsometry measurements suggested that the refractive index of zinc nitride is 2.3-2.7, and the extinction coefficient is ~0.5-0.7 in the energy range 1.5-3.0 eV. The electron transport measurement shows that the single crystal zinc nitride has a mobility as high as 395 cm2 /Vs.
A plasma-assisted MBE system was employed for magnesium nitride growth. The growth temperature was in the range of 300-350 oC. RHEED and laser reflectivity were employed during growth. The RHEED and X-ray diffraction patterns indicated that the epilayers are single crystal films. The optical laser reflectivity was well fitted by a modified optical equation. The optical constants and growth rate were derived from the simulation. X-ray diffraction showed that (400) oriented single crystal magnesium nitride films were grown on (100) MgO substrates. The optical transmittance spectra show that the magnesium nitride has a high absorption below 500 nm. The calculated absorption coefficient is as high as 4x10-4 cm-1 in the range of ~2.5-3.0 eV. The optical band gap was estimated to be ~2.5 eV. Ellipsometry measurements showed that the refractive index of the magnesium nitride is 2.3-2.75 and the extinction coefficient is less than 0.3 in the energy range of 1.5-3.0 eV.
Zinc nitride-magnesium nitride (Zn3-3xMg3xN2) alloys were grown on (100) YSZ substrates by sputtering. The bandgap ranged from 1.2 eV to 2.1 eV for Mg content x in the 0-0.59 range. One film with a bandgap of ~1.4 eV and Mg content of 0.18 has the relatively high mobility of 47 cm2 /Vs which was expected for photovoltaics application. / Graduate
|
130 |
Next generation mid-wave infrared cascaded light emitting diodes: growth of broadband, multispectral, and single color devices on GaAs and integrated circuitsProvence, Sydney R. 01 August 2016 (has links)
InAs/GaSb superlattices are an attractive material system for infrared light emitting diodes, due to the ability to tune the band gap throughout most of the infrared regime. A key consideration in the epitaxial growth of these heterostructures is crystalline material quality. In developing thick layers of epitaxially grown material, there are moderate amounts of elastic strain that can be incorporated into a heterostructure, beyond which deformations will form that will alleviate the lattice mismatch. This thesis investigates the optical and electronic properties of lattice-mismatched and strained materials through the study of thick dual-color light emitting diodes, broadband light emitting diodes, and InAs/GaSb superlattice devices developed on GaAs substrates and GaAs integrated circuits.
A dual-color infrared light emitting diode is demonstrated emitting in the mid-wave infrared band at 3.81 μm and 4.72 μm. The design of the device stacks two independently operable InAs/GaSb superlattices structures on top of one another, so that 10 μm of material is grown with molecular beam epitaxy. Each layer is lattice-matched to a GaSb substrate. At quasi-continuous operation, radiances of 5.48 W/cm2-sr and 2.67 W/cm2-sr are obtained.
A broadband light emitting diode spanning the mid-wave infrared is demonstrated with eight stages of InAs/GaSb superlattices individually tuned to a different color. The performance of the device is compared with an identical eight stage device emitting in the middle of the mid-wave infrared. The emission of the fabricated broadband device spans from 3.2 μm to 6 μm with peak radiance of 137.1 mW/cm2-sr.
Growth of antimonide-based devices on GaAs is desirable to the relative transparency of semi-insulating substrates throughout the infrared, and as semi-insulating GaSb substrates are not available. The growth of bulk GaSb on GaAs is explored through different techniques in order to confine relaxation due to lattice mismatch strain to the GaSb/GaAs interface. A low temperature nucleation technique with a thin GaSb wetting layer is found to have the best overall surface morphology, although screw dislocations are a prominent feature on all samples. The dislocations and overall surface roughness are not found to destructively impact the overall device quality, as four stage InAs/GaSb superlattice devices grown on GaAs substrates are found to have superior electroluminescent emission and external quantum efficiency compared to an identical device grown on a GaSb substrate due to the higher substrate transparency and superior thermal properties.
Epitaxy on electronics growth techniques on GaAs integrated circuits are developed to bypass the hybridization process in light emitting diode development. Chips obtained from Quorvo, Inc. are found to endure ultra-high vacuum molecular beam epitaxy environment at higher temperatures with silicon nitride encapsulation, and a low temperature oxide removal technique is developed using an atomic hydrogen source. Chemical-mechanical polishing techniques are developed to create an “epi-ready” substrate surface. Ultimately, no photoluminescent emission is observed from InAs/GaSb superlattices grown on GaAs integrated circuits, although electroluminescent emission is still possible.
|
Page generated in 0.0504 seconds