Spelling suggestions: "subject:"fonte carlo."" "subject:"fonte sarlo.""
71 |
Estudo da influência dos mecanismos de espalhamento no transporte semiclássico em materiais semicondutores através do método de monte Carlo / Influence of the scattering mechanisms on semiconductor semi classical transport using Monte Carlo methodLuiz Gilberto de Oliveira Messias 19 April 2001 (has links)
Neste trabalho estudamos a influência dos mecanismos de espalhamento no transporte semiclássico de portadores em materiais semicondutores. Para tanto, foi desenvolvida uma rotina computacional baseada no método de Monte Carlo, sendo esta aplicada aos seguintes materiais: 1) Antimoneto de Gálio (GaSb); 2) Telureto de Cádmio e Telureto de Cádmio Manganês (CdTe e Cd 1-xMnxTe); 3) Liga de Silício Germânio (Si1-xGe x; 4) Super rede de AlxGa1-xAs /GaAs. Os estudos realizados foram baseados na influência dos mecanismos de espalhamento nos seguintes parâmetros: i) velocidade de deriva; ii) população dos portadores iii) energia média; iv) função distribuição; v) mobilidade; vi) difusão. No GaSb o estudo foi realizado para o transporte de elétrons e buracos, dando ênfase na atuação do mecanismo de espalhamento por impurezas e o efeito de compensação. No estudo do transporte eletrônico no CdTe, foi realizada uma análise da influência da concentração de Manganês no composto Cd1-xMnxTe. Os efeitos dos mecanismos de ionização por impacto (que atua em altos campos) e espalhamento por liga foram estudados no sistema Si1-xGex. No estudo realizado na super-rede de AlxGa1-xAs /GaAs, o método de Monte Carlo foi adaptado ao sistema bi-dimensional, onde foi estudada a influência do mecanismo de espalhamento causado pela rugosidade da interface, na coerência das oscilações do elétron na mini-banda (Oscilações de Bloch).O método computacional desenvolvido mostrou-se bem versátil nos estudos propostos. Os modelos adotados em cada estudo descrevem bem os resultados experimentais disponíveis na literatura / In this work we have studied the influence of scattering mechanisms in semiclassical transport in semiconductor materials. So, it was developed a computational routine based on Monte Carlo method, applied to the following materials: 1) Gallium Antimonide (GaSb); 2) Cadmium Telluride and Cadmium Manganese Telluride (CdTe e Cd1-xMnxTe); 3) Silicon Germanium Alloy (Si1-xGex); 4) Superlattice of AlxGa1-xAs /GaAs. Our work have been done based in the influence of the scattering mechanisms on the transport properties, such as: i) drift velocity; ii) carrier population; iii) mean energy; iv) distribution function; v) mobility; vi) diffusion. In GaSb, we studied the transport for both electron and hole, where we investigate the role of scattering mechanism of ionized impurity and the inclusion of carrier compensation. In the study of the electronic transport in CdTe, we analyzed the effect of Manganese concentration in the transport properties of Cd1-xMnxTe. The effects of the impact ionization and alloy mechanisms were studied in Si1-xGe x. For the AlxGa1-xAs /GaAs superlattice, the Monte Carlo method has been adapted for the bidimensional system, where we have studied the influence of the interface roughness scattering in the electron motion (Bloch Oscillations). The computational method shown good versatility for the proposed problems and our models described very well the experimental results available in the literature
|
72 |
Comportamento crítico dinâmico de algoritmo de Wolff no Modelo de Ising com correlação de sítios e ligações. / Critical dynamics behavior of the Wolff Algorithm in the site-bond correlated Ising modelPaulo Roberto de Araujo Campos 27 February 1998 (has links)
Estudamos o comportamento dinâmico do algoritmo de Wolff no modelo de Ising diluído com correlação de sítios e ligações (modelo SBC). Nosso objetivo principal foi estudar a performance deste algoritmo em um sistema onde além da desordem à presença de impurezas não magnéticas, houvesse mais um parâmetro presente, a correlação espacial. Além disto foi possível obter o diagrama de fases para o modelo, o qual possibilita entendermos um pouco o efeito da desordem e da correlação no sistema.Verificamos que o diagrama de fases por nós obtidos está em boa concordância com os dados experimentais obtidos com o composto magnético Knip Mg1-pF3, o qual foi a motivação para o modelo SBC. O estudo do comportamento dinâmico nos possibilitou entender um pouco mais como o algoritmo de Wolff se comporta quando submetido a sistemas mais complexos, como é o caso do modelo em estudo, verificamos uma melhor performance deste algoritmo à medida que tanto a diluição quanto a correlação é aumentada. Esse comportamento é oposto àquele verificado nos algoritmos locais. Essa melhor performance do algoritmo de Wolff quando submetido a tais sistemas é bastante positivo, pois isto possibilita obtermos medidas de quantidades físicas de interesse de forma mais precisa, pois há uma redução drástica da correlação estatística entre configurações produzidas por esta dinâmica. / We extend the Wolff Algorithm to include correlated spin interactions in diluted magnetic systems. This algorithm is applied to study the site-bond-correlated Ising model on a two-dimensional square lattice. We use a finite-size scaling procedure to obtain the phase diagram in the temperature-concentration space. Our results are in excellent agreement with the experimental data for the Knip Mg1-pF3, compound. We also present the critical dynamical behavior of the Wolff algorithm for this system. We have verified that the autocorrelation time diminishes in the presence of dilution and correlation, showing that the Wolff algorithm performs even better in such situations. This behavior is completely different from those exhibited by the single spin-flips algorithms.
|
73 |
Avaliação de algoritmo Macro Response Monte Carlo através dos espectros de elétrons / Macro Response Monte Carlo algorithm evaluated through electron spectra.Luís Augusto Perles 04 September 2006 (has links)
O tempo de simulação computacional em planejamento de radioterapia ainda é muito alto. Diversas técnicas de redução de variância têm sido desenvolvidas para o transporte de elétrons a fim de reduzir o tempo de simulação. Destacamos algumas delas: Macro Monte Carlo (MMC), Response History Monte Carlo (RHMC) e Macro Response Monte Carlo (MRMC). Todas es- sas técnicas utilizam base de dados onde as histórias dos elétrons foram previamente simuladas. Tais algoritmos, até o presente momento, foram somente avaliados através da dose absorvida. Neste trabalho, fazemos uma comparação dos espectros dos elétrons utilizando uma implemen- tação própria do MRMC. A base de dados do MRMC consiste de histórias pré-simuladas de elétrons em pequenas esferas de material homogêneo (chamadas de kugel) para diferentes ti- pos de energias e tamanhos de raios. O MRMC usa o kugel de maior raio para transportar o elétron, desde que o mesmo não cruze nenhuma interface entre materiais. Nesta implementa- ção, o transporte do elétron através de uma interface é aproximado por uma linha reta e, ao final, corrige-se sua energia pela perda contínua de energia. A base de dados kugel foi gerada pelo Geant4 versão 8.0 para água, tecido mole e osso compacto, para a faixa de energia de 31,63 MeV até 178 keV, com raios de 0,025 cm a 1,0 cm. Os testes consistem na simulação de um feixe estreito de elétrons em objetos simuladores homogêneos e heterogêneos de forma cilíndrica. Foram obtidos os espectros frontais e laterais pelo MRMC e comparados aos respec- tivos espectros simulados pelo Geant4. Foram simulados 106 histórias em ambos os sistemas, por este motivo não houve a necessidade de normalizar os histogramas. Os espectros avaliados mostram uma boa concordância para energias acima de 5 MeV. A diferença entre as energias dos picos foi menor que 1,7%, para energias acima de 5 MeV em objetos simuladores homo- gêneos. Para o osso compacto as diferenças entre os espectros frontais foram cerca de 5%, e para os laterais menor que 2% para energias acima de 5 MeV. Os tempos de simulação com o MRMC foram de até 15 vezes menores para objetos simuladores homogêneos e cerca de 5 vezes menores para objetos simuladores heterogêneos. / In radiotherapy the computer simulation elapsed time for treatment planning is still a prob- lem. Several techniques for electron transport variance reduction have been developed in order to speed up the calculations. Some of them are: Macro Monte Carlo (MMC), Response History Monte Carlo (RHMC) and Macro Response Monte Carlo (MRMC). All of them use a database where electrons histories were previously simulated. These algorithms have been evaluated only by absorbed dose. This work shows a comparison between electron spectra simulated by our implementation of MRMC. Such algorithm uses a database where electron histories were pre-simulated in small homogeneous spheres (called kugel) for several different initial ener- gies and some different radii. The MRMC transportation code uses the largest kugel size for electron transportation, since it does not cross any material boundary. In this implementation the electron transport through a boundary is done in a straight line and the energy correction is made by continuous slowing down approximation. The kugel database has been generated using Geant4 version 8.0 for water, soft tissue and compact bone, with energy range spanning from 31.63 MeV down to 178 keV and with radius range from 0.025 to 1.0 cm. The MRMC benchmarks consist of an electron pencil beam simulation in homogeneous and heterogeneous cylindrical phantoms. The forward and lateral electron output spectra are computed and com- pared against Geant4 simulations. We have simulated 106 histories in both systems, so the histograms are compared without any normalization factors. The agreement between spectra shapes have been evaluated and show to be good above 5 MeV. The results show an agreement better than 1.7% in the peak energy for energies above 5 MeV, for water and soft tissue homo- geneous phantoms. The agreement for compact bone homogeneous phantom between peaks of forward spectra were around 5% and for side spectra were better than 2% for energies above 5 MeV. The benchmarks have shown that our implementation of MRMC are up to 15 times faster than Geant4 for homogeneous phantoms and 5 times for heterogeneous ones.
|
74 |
Caracterização da dose em pacientes devido à produção de imagens de raios-X utilizadas em radioterapia guiada por imagem - IGRT / Characterization of dose in patients due to production of X-ray images used in image-guided radiotherapy - IGRTVinicius Demanboro Gonçalves 25 May 2012 (has links)
O processo de radioterapia consiste em várias etapas, iniciando na indicação pelo médico. O plano de tratamento passa então por um processo denominado simulação, onde é adquirida uma série de imagens por tomografia computadorizada que são transferidas para o sistema de planejamento, onde a delineação dos volumes alvos e tecidos normais adjacentes serão realizadas. Após a delineação desses volumes, no sistema de planejamento são colocados os campos de irradiação e a dose desejada conforme prescrição médica. O sistema de planejamento calcula então a dose que o volume alvo e os tecidos adjacentes poderão receber. Se estas doses estão dentro dos padrões aceitáveis, o planejamento então é aprovado e enviado ao acelerador linear para a execução do tratamento. Antes da execução do tratamento, é realizada uma imagem, seja através de filme radiográfico ou digitalmente, para avaliar a posição no paciente na mesa de tratamento. Se a localização do paciente está correta, a dose é então liberada. Esse protocolo de aquisição de imagem é denominado como Radioterapia Guiada por Imagem (IGRT). A quantidade de radiografias de posicionamento segue um protocolo definido conforme a região a ser irradiada. Como resultado deste procedimento, sabe-se que uma determinada dose adicional é recebida pelos pacientes, tornando-se um fator importante a ser determinado. Esta avaliação foi realizada através da simulação de Monte Carlo, utilizando o código MCNP. Para isso foi realizada primeiramente toda a caracterização da fonte de raios X com uso de câmaras de ionização e dosimetros TL juntamente com as simulações no MCNP. Após essa caracterização, as imagens e as estruturas do planejamento radioterápico foram convertidas para serem utilizadas no código MCNP. Para que as doses fossem calculadas nos principais órgãos de risco no tratamento de próstata: bexiga, reto e cabeças de fêmur direita e esquerda. / The process of radiotherapy treatment consists of several stages, starting from the statement given by the physician. The treatment planning undergoes a process called simulation, where a series of computed tomography images is acquired and transferred to the treatment planning system, where the delineation of target volumes and adjacent normal tissues will be performed. After the delineation of these volumes, then irradiation fields and dose precribed by the physician are placed in the treatment planning system. It calculates the dose that target volume and surrounding tissues are receiving. If the doses are within acceptable standard values, then the design is approved and submitted to the linear accelerator for the treatment course. Before treatment course, an image is performed, either by radiographic or digital film, in order to evaluate (check) the patient position on the treatment table. If the patient position is correct, the treatment is realized. This image acquisition protocol is called Image-Guided Radiotherapy (IGRT). The amount of radiographic positioning follow a protocol defined for the region to be treated. As a result of this procedure, it is known that a specific additional dose is received by the patient, becoming an important factor to be determined. In this work, this additional dose evaluation was performed by the Monte Carlo simulation using the MCNP algorithm. The characterization of the entire X-ray source was primarily realized with ionization chamber thermoluminescent dosimeters and simulations with the MCNP code. After the X-ray tube characterization, images and the structures for the radiotherapy planning were converted to be used in the MCNP code for dose calculation at the main organs at risk during a prostate treatment: bladder, rectum and femoral heads right and left.
|
75 |
Long memory and the aggregation of AR(1) processesMudelsee, Manfred 23 March 2017 (has links) (PDF)
Granger (1980) found that the aggregation of m short-memory AR(1) processes yields a long-memory process. Thereby he assumed m -> ∞, Gaussian shape and betadistributed AR(1) parameters over (0; 1). To test hypotheses that long memory in climate time series comes from aggregation, the finding of Granger (1980) cannot be directly applied. First, the number of \"microclimatic\" processes to be aggregated is finite. Second, climatic processes often produce right-skewed data. Third, the AR(1) parameters of the microclimatic processes could be restricted to a narrower interval than (0; 1). We
therefore perform Monte Carlo simulations to study aggregation in climate time series under realistic conditions. The long-memory parameter, H, is estimated by fitting an ARFIMA model to various types of aggregations. Our results are as follows. First, for m above a few hundred, H approaches saturation. Second, the distributional shape has little influence, as noted by Granger (1980). Third, the upper limit of the interval for the AR(1) parameter has a strong influence on the saturation value of H, as noted by Granger (1980). / Granger (1980) fand heraus, dass die Summe von m schwach seriell abhängigen AR(1)-Prozessen einen stark seriell abhängigen Prozess ergibt. Er nahm dabei an, dass m -> ∞ geht, die Verteilungen Gaußsch sind und die AR(1)-Parameter beta-verteilt über (0; 1) sind. Um die Hypothese zu testen, daß starke serielle Abhängigkeit in Klimazeitreihen von dieser \"Aggregation\" rührt, kann das Ergebnis von Granger (1980) jedoch nicht direkt angewendet werden. Erstens: die Anzahl \"mikroklimatischer\", zu summierender Prozesse is endlich. Zweitens: Klimaprozesse erzeugen oft rechtsschief verteilte Daten. Drittens: die AR(1)-Parameter der mikroklimatischen Prozesse mögen auf ein engeres Intervall begrenzt sein als (0; 1). Wir f¨uhren deshalb Monte-Carlo-Simulationen durch, um die Aggregation in Klimazeitreihen für realistische Bedingungen zu studieren. Der Parameter H, der die starke serielle Abhängigkeit beschreibt, wird geschätzt durch die Anpassung eines ARFIMA-Modelles an unterschiedliche Aggregations-Typen. Unsere Ergebnisse sind wie folgt. Erstens: für m oberhalb einiger hundert erreicht H S¨attigung. Zweitens: die Verteilungsform hat geringen Einfluß, wie von Granger (1980) bemerkt. Drittens: die obere Grenze des Intervalles für den AR(1)-Parameter hat einen starken Einfluß auf den Sättigungwert von H, wie von Granger (1980) bemerkt.
|
76 |
Tranport de spin dans des matériaux magnétiques en couches minces par simulations Monte Carlo / Study of spins transport mechanisms in magnetics thins filmsMagnin, Yann 03 November 2011 (has links)
Depuis le début du XX siècle, la thématique de transport a concentré l’attentionde nombreux chercheurs. L’objectif étant alors d’identifier et de comprendre lesdifférentes sources de diffusions prenant part à la résistivité de la matière. Les deuxpremières sources diffusives mises en évidence ont été les phonons dépendant de latempérature, et les défauts du réseau cristallin. Dans les années 1950, l’étude des semiconducteursa fait émerger une troisième source de diffusion, la diffusion magnétique.Dès la mise en évidence du rôle joué par le magnétisme sur la résistivité de certainsmatériaux, il a rapidement été établi que la résistivité magnétique R est tributaire dela stabilité de l’ordre magnétique du réseau. A basse température T, la diffusion desélectrons s’ opère par l e biais des ondes de spins. A haute température, R est proportionnelleaux corrélations spin-spin. Cependant, les mécanismes de diffusion ayant lieuau voisinage de la température de transition ordre/désordre magnétique restent encoremal comprise. L’objectif de cette thèse a consisté à étudier ce problème à l’aide d’uneapproche nouvelle basée sur la simulation Monte Carlo. En effet, les théories existantessont toutes construites avec des hypothèses sur les mécanismes à l’origine du comportementde résistance tels que : fonction corrélation spin-spin, longueur de localisation.Elles utilisent beaucoup d’approximations au cours du calcul telles que théorie du champmoyen, approximation du temps de relaxation, la portée des fonctions de corrélation. Lesprincipaux handicaps de ces théories sont de n’être valables que pour certaines gammesde températures, et d’être tributaires du type de magnétisme porté par les réseaux cristallins.Notre approche offre quant à elle une procédure unifiée concernant l’étude desrésistivités magnétiques fonction de la température. Cette méthode peut s’appliquer `atout type de matériaux, tout ordre magnétique (ferromagnétique, antiferromagnétique,ferrimagnétique, verre de spin, ...), tout type de modèle de spins (Ising, Heisenberg, XY,...), enfin tout type de réseau cristallin. Seule la connaissance du Hamiltonien permet defaire la simulation, et de reproduire des mesures expérimentales avec la possibilité d’unecomparaison quantitative.Dans un premier temps, nous traitons de structures ferromagnétiques et interprétons les différents mécanismes de diffusion en fonction de la température. Nousétendons ensuite l´étude aux systèmes antiferromagnétiques, frustrés et non-frustrés. Cessystèmes n’ont fait l’objet que de peu d’études. Dans le cas des systèmes antiferromagnétiques non-frustrés, nous sommes en mesure de contredire une prédiction théoriquefaite par Haas en 1968, concernant la forme de la résistance magnétique à la transition dephase . Dès lors, nous nous consacrerons à l’étude des mécanismes de transport dansdes systèmes antiferromagnétiques frustrés. Ces travaux ont permis de mettre en évidencedes comportements nouveaux des transitions de phases des résistances magnétiques : nousmontrons que ces résistances subissent une transition du premier ordre , mais qu’ilest également possible par le contrôle d’un paramètre du modèle, de choisir le sens de latransition : des hautes résistances vers les basses résistances ou inversement .Pour finir, nous confrontons nos résultats de simulations avec des mesures expérimentalesen réalisant une étude de transport sur un matériau semiconducteur antiferromagnétique :MnTe. Il résulte de cette étude un bon accord entre nos résultats de simulations et lesmesures expérimentales . / ....
|
77 |
Estimation personnalisée de la dose délivrée au patient par l’imagerie embarquée kV-CBCT et réflexions autour de la prise en charge clinique / Personalized patient dose estimation for on board KV-CBCT imaging systems and reflections on the clinical managementChesneau, Héléna 16 March 2017 (has links)
Les protocoles de traitement du cancer par Radiothérapie Conformationnelle par Modulation d'Intensité (RCMI) ciblent avec une précision de plus en plus grande la tumeur. Pour cela, ils nécessitent des informations anatomiques précises du patient juste avant le traitement, qui peuvent d'être obtenues à l'aide de systèmes d'imagerie embarqués sur l'accélérateur linéaire médical délivrant le faisceau de traitement. Ces systèmes, composés d'un tube à rayons X et d'un détecteur 2D planaire, sont appelés kV-Cone Beam CT (kV-CBCT). Aujourd'hui, leur usage est très fortement répandu dans le cadre des traitements par RCMI. Cependant, ces examens kV-CBCT sont responsables d'une dose de rayonnements ionisants additionnelle qui est loin d'être négligeable et pouvant d'être à l'origine de l'apparition d'effets secondaires, tels que des cancers radio-induits chez les patients traités. Au cours de cette thèse, un simulateur basé sur la méthode de Monte-Carlo a été développé permettant ainsi d'estimer avec précision les doses délivrées aux organes lors des examens d'imagerie kV-CBCT. Cet outil a ensuite été utilisé afin d'étudier différentes stratégies de prise en compte clinique de ces doses additionnelles. L'étude présentée dans ce manuscrit propose notamment une méthode rapide d'estimation des niveaux de doses délivrés aux organes prenant en compte la morphologie de chaque patient. Cette stratégie a été développée à partir d'une cohorte de 50 patients incluant 40 enfants et 10 adultes. Ces travaux ont été réalisés en collaboration avec l'unité de physique médicale du Centre Eugène Marquis à Rennes qui a fourni les données cliniques nécessaires à l'étude. / Protocols for cancer treatment using intensity-modulated radiation therapy (IMRT) allow to target the tumor with an increased precision. They require accurate anatomical information of the patient just before the treatment, which can be obtained using on-board imaging systems mounted on the medical linear accelerator delivering the treatment beam. These systems, composed of an X-ray tube and a 2D planar detector, are called kV-Cone Beam CT (kV-CBCT). Nowadays, they are widely used in the context of IMRT treatments. However, these kV-CBCT examinations are also responsible for an additional dose of ionizing radiations which is far to be negligible and could be the cause for secondary effects, such as radiation-induced second cancers for treated patients. During this PhD work, a simulator based on the Monte Carlo method was developed in order to calculate accurately the doses delivered to organs during kV-CBCT examinations. Then, this tool was used to study several strategies to take in account for the imaging additional doses in clinical environment. The study reported here includes, in particular, a fast and personalized method to estimate the doses delivered to organs. This strategy was developed using a cohort of 50 patients including 40 children and 10 adults. This work has been done in collaboration with the medical physics unit of the Eugène Marquis medical center in Rennes, which has collected the clinical data used for this study.
|
78 |
Reliability Assessment Using Bootstrapping and Identification of Point of Diminishing ReturnsUgwumba, Miracle C. January 2016 (has links)
No description available.
|
79 |
Sampling approaches in Bayesian computational statistics with RSun, Wenwen 27 August 2010 (has links)
Bayesian analysis is definitely different from the classic statistical methods. Although, both of them use subjective ideas, it is used in the selection of models in the classic statistical methods, rather than as an explicit part in Bayesian models, which allows the combination of subjective ideas with the data collected, update the prior information and improve inferences. Drastic growth of Bayesian applications indicates it becomes more and more popular, because the advent of computational methods (e.g., MCMC) renders sophisticated analysis. In Bayesian framework, the flexibility and generality allows it to cope with very complex problems.
One big obstacle in earlier Bayesian analysis is how to sample from the usually complex posterior distribution. With modern techniques and fast-developed computation capacity, we now have tools to solve this problem.
We discuss Acceptance-Rejection sampling, importance sampling and then the MCMC methods. Metropolis-Hasting algorithm, as a very versatile, efficient and powerful simulation technique to construct a Markov Chain, borrows the idea from the well-known acceptance-rejection sampling to generate candidates that are either accepted or rejected, but then retains the current values when rejection takes place (1). A special case of Metropolis-Hasting algorithm is Gibbs Sampler. When dealing with high dimensional problems, Gibbs Sampler doesn’t require a decent proposal distribution. It generates the Markov Chain through univariate conditional probability distribution, which greatly simplifies problems. We illustrate the use of those approaches with examples (with R codes) to provide a thorough review.
Those basic methods have variants to deal with different situations. And they are building blocks for more advanced problems.
This report is not a tutorial for statistics or the software R. The author assumes that readers are familiar with basic statistical concepts and common R statements. If needed, a detailed instruction of R programming can be found in the Comprehensive R Archive Network (CRAN): http://cran.R-project.org / text
|
80 |
High accuracy correlated wavefunctionsHarrison, R. J. January 1984 (has links)
No description available.
|
Page generated in 0.0361 seconds