Published Article / The quality of spin casting products and mould life are critically dependent on thermal conditions they undergo. In order to improve the performance of production and to optimise the spin-casting process, characteristics of the thermal process was firstly identified by means of the measurement and simulation. Furthermore the investigation of the developed control methods, including the thermal property substitute method and mixture method of the metal powder, was kept on the effect of air-cooling induced automatically from the spinning of the mould on the thermal process. <br>The air cooling system was developed to optimise the thermal process during casting, utilising a theoretical analysis of the air-flow characteristics in a cooling tube submerged in a silicon mould and the characteristics of convection heat transfer associated with the mould and cast part. A numerical simulation of the casting process was also adopted in the analysis. The effect of the developed system on the thermal process was determined experimentally and it was found that a system of aircooling, automatically induced from the spinning of the mould, is feasible in optimisation of the thermal process. <br>The developed control methods can be applied to the practice of spin casting individually or collectively according to the specific situations and requirements.

Thesis (PhD (Industrial Engineering))--University of Stellenbosch, 2011. / ENGLISH ABSTRACT: Injection moulding of polymer components is subject to ever increasing demands for improved part quality and production rate. It is widely recognised that the mould cooling strategy employed is crucial to achieving these goals. A brief overview of injection moulding units and different types of injection moulds is given. The modern Additive Manufacturing (AM) technology for processing metal powders such as Direct Metal Laser Sintering (DMLS) and Selective Laser Melting (SLM) offers almost full freedom to the mould designer. Some of these modern manufacturing methods based on metal powders, which are able to produce complex cooling channels are analysed. A drastic change has entered the mould design domain - shifting the paradigm from design for manufacture to manufacture for design. In combination with suitable AM methods the concept of surface cooling moulds can now be efficiently implemented. This study presents a new approach of predicting the minimum cooling time required for the produced part. Different cooling layouts are analysed taking the heat transfer into consideration. The lumped heat capacity method is implemented in this research in order to determine the minimum cooling cycle time required. A new approach was developed to determine the most suitable cooling layout configuration, such as conventional cooling, conformal cooling or surface cooling, required for a moulded part based on its characteristics such as shape complexity, space available for the cooling layout, part quality requirements, production volume, and product life cycle. A mould cooling design process including simulation, reverse engineering and manufacturing of the mould insert was implemented in this study. In order to validate the generic model developed during the course of this research comparative experiments were carried out to determine the difference in performance of injection moulding using conventional or surface cooling methods. The experimental results showed a significant improvement in part quality produced with reduced cycle times using the surface cooling method. / AFRIKAANSE OPSOMMING: ‘Injection Moulding’ van polimeer komponente word al meer gedruk vir verbeterde kwaliteit en vinniger produksie tyd. Dit is orals bekend dat die gietvorm afkoeling strategie ‘n groot rol speel om hierdie twee doelwitte te bereik. Eers word ‘n kort oorslag gegee van ‘Injection Moulding’ eenhede en van verskillende ‘Injection Moulding’ vorms. Die moderne Aditatiewe Vervaardigingstegnologie vir die prosessering van metaal poeiers soos bv. Direkte Metaal Laser Sintering (DMLS) en Selektiewe Laser Smelting (SLM) bied basies volle vryheid ten opsigte van gietvorm ontwerp. Party van die moderne vervaadigings metodes, wat op metaal poeiers gebaseer is, wat komplekse koelings kanale kan produseer word geanaliseer. Die ontwerpers arena het ‘n groot verandering ondergaan deurdat die fokus van ontwerp vir vervaardiging verskuif het na vervaardiging vir ontwerp. In kombinasie met toepaslike aditatiewe vervaardigings metodes kan oppervlak verkoeling nou effektief geïmplementeer word. Hierdie studie bied a nuwe manier om die minimum verkoelings tyd benodig vir ‘n part te voorspel. Verskeie verkoelings uitlegte word geanaliseer waar hitte oordrag in ag geneem word. Die “lumped heat capacity” metode word gebruik om die minimum siklus tyd te bepaal. ‘n Nuwe benadering is ontwikkel om die mees geskikste verkoelings uitleg soos bv. konvensionele verkoeling, konvorme verkoeling of oppervlak verkoeling te bepaal vir ‘n spesifieke part gebaseer op die part se vorm kompleksiteit, spasie beskikbaar vir verkoelings kanale, kwaliteit vereistes en produk lewensiklus. Die volgende is in die studie geïmplementeer: ‘n vorm verkoelings ontwerp proses met simulasie, ‘reverse engineering’ en vervaardiging van die vorm insetsel. Om die generiese model te verifieer gedurende die studie is vergelykende eksperimente uitgevoer om die verskil in prestasie te bepaal tussen die gebruik van konvensionele en oppervlak verkoelings metodes. Die eksperimentele resultate het ‘n beduidende verbetering in part kwaliteit getoon met ‘n verkorte siklus tyd tydens die gebruik van die oppervlag verkoelings metode.