Avec la percée des téléphones portables et des tablettes numériques intégrant des fonctions avancées de traitement de l'information, une croissance exponentielle du marché des systèmes sur puce (SoC pour System On Chip en anglais) est attendue jusqu'en 2016. Ces systèmes, conçus dans les dernières technologies nanométriques, nécessitent des vitesses de fonctionnement très élevées pour offrir des performances incroyables, tout en consommant remarquablement peu. Cependant, concevoir de tels systèmes à l'échelle nanométrique présente de nombreux enjeux en raison de l'accentuation d'effets parasites avec la miniaturisation des transistors MOS sur silicium massif, rendant les circuits plus sensibles aux phénomènes de fluctuations des procédés de fabrication et moins efficaces énergétiquement. La technologie planaire complètement désertée (FD pour Fully depleted en anglais) SOI, offrant un meilleur contrôle du canal du transistor et une faible variabilité de sa tension de seuil grâce à un film de silicium mince et non dopé, apparaît comme une solution technologique très bien adaptée pour répondre aux besoins de ces dispositifs nomades alliant hautes performances et basse consommation. Cependant pour que cette technologie soit viable, il est impératif qu'elle réponde aux besoins des plateformes de conception basse consommation. Un des défis majeurs de l'état de l'art de la technologie planaire FDSOI est de fournir les différentes tensions de seuils (VT) requises pour la gestion de la consommation et de la vitesse. Le travail de recherche de thèse présenté dans ce mémoire a contribué à la mise en place d'une plateforme de conception multi-VT en technologie planaire FDSOI sur oxyde enterré mince (UTB pour Ultra Thin Buried oxide en anglais) pour les nœuds technologiques sub-32 nm. Pour cela, les éléments clefs des plateformes de conception basse consommation en technologie planaire sur silicium massif ont été identifiés. A la suite de cette analyse, différentes architectures de transistors MOS multi-VT FDSOI ont été développées. L'analyse au niveau des circuits numériques et mémoires élémentaires a permis de mettre en avant deux solutions fiables, efficaces et de faible complexité technologique. Les performances des solutions apportées ont été évaluées sur un chemin critique extrait du cœur de processeur ARM Cortex A9 et sur une cellule SRAM 6T haute densité (0,120 µm²). Egalement, une cellule SRAM à quatre transistors est proposée, démontrant la flexibilité au niveau conception des solutions proposées. Ce travail de recherche a donné lieu à de nombreuses publications, communications et brevets. Aujourd'hui, la majorité des résultats obtenus ont été transférés chez STMicroelectronics, où l'étude de leur industrialisation est en cours. / Driven by the strong growth of smartphone and tablet devices, an exponential growth for the mobile SoC market is forecasted up to 2016. These systems, designed in the latest nanometre technology, require very high speeds to deliver tremendous performances, while consuming remarkably little. However, designing such systems at the nanometre scale introduces many challenges due to the emphasis of parasitic phenomenon effects driven by the scaling of bulk MOSFETs, making circuits more sensitive to the manufacturing process fluctuations and less energy efficient. Undoped thin-film planar fully depleted silicon-on-insulator (FDSOI) devices are being investigated as an alternative to bulk devices in 28nm node and beyond, thanks to its excellent short-channel electrostatic control, low leakage currents and immunity to random dopant fluctuation. This compelling technology appears to meet the needs of nomadic devices, combining high performance and low power consumption. However, to be useful, it is essential that this technology is compatible with low operating power design platforms. A major challenge for this technology is to provide various device threshold voltages (VT), trading off power consumption and speed. The research work presented in this thesis has contributed to the development of a multi-VT design platform in FDSOI planar technology on thin buried oxide (UTB) for the 28nm and below technology nodes. In this framework, the key elements of the low power design platform in bulk planar technology have been studied. Based on this analysis, different architectures of FDSOI multi-VT MOSFETs have been developed. The analysis on the layout of elementary circuits, such as standard cells and SRAM cells, has put forward two reliable, efficient and low technological complexity multi- strategies. Finally, the performances of these solutions have been evaluated on a critical path extracted from the ARM Cortex A9 processor and a high-density 6T SRAM cell (0.120µm²). Also, an SRAM cell with four transistors has been proposed, highlighting the design flexibility brought by these solutions. This thesis has resulted in many publications, communications and patents. Today, the majority of the results obtained have been transferred to STMicroelectronics, where the industrialization is in progress.

Avec la percée des téléphones portables et des tablettes numériques intégrant des fonctions avancées de traitement de l'information, une croissance exponentielle du marché des systèmes sur puce (SoC pour System On Chip en anglais) est attendue jusqu'en 2016. Ces systèmes, conçus dans les dernières technologies nanométriques, nécessitent des vitesses de fonctionnement très élevées pour offrir des performances incroyables, tout en consommant remarquablement peu. Cependant, concevoir de tels systèmes à l'échelle nanométrique présente de nombreux enjeux en raison de l'accentuation d'effets parasites avec la miniaturisation des transistors MOS sur silicium massif, rendant les circuits plus sensibles aux phénomènes de fluctuations des procédés de fabrication et moins efficaces énergétiquement. La technologie planaire complètement désertée (FD pour Fully depleted en anglais) SOI, offrant un meilleur contrôle du canal du transistor et une faible variabilité de sa tension de seuil grâce à un film de silicium mince et non dopé, apparaît comme une solution technologique très bien adaptée pour répondre aux besoins de ces dispositifs nomades alliant hautes performances et basse consommation. Cependant pour que cette technologie soit viable, il est impératif qu'elle réponde aux besoins des plateformes de conception basse consommation. Un des défis majeurs de l'état de l'art de la technologie planaire FDSOI est de fournir les différentes tensions de seuils (VT) requises pour la gestion de la consommation et de la vitesse. Le travail de recherche de thèse présenté dans ce mémoire a contribué à la mise en place d'une plateforme de conception multi-VT en technologie planaire FDSOI sur oxyde enterré mince (UTB pour Ultra Thin Buried oxide en anglais) pour les nœuds technologiques sub-32 nm. Pour cela, les éléments clefs des plateformes de conception basse consommation en technologie planaire sur silicium massif ont été identifiés. A la suite de cette analyse, différentes architectures de transistors MOS multi-VT FDSOI ont été développées. L'analyse au niveau des circuits numériques et mémoires élémentaires a permis de mettre en avant deux solutions fiables, efficaces et de faible complexité technologique. Les performances des solutions apportées ont été évaluées sur un chemin critique extrait du cœur de processeur ARM Cortex A9 et sur une cellule SRAM 6T haute densité (0,120 µm²). Egalement, une cellule SRAM à quatre transistors est proposée, démontrant la flexibilité au niveau conception des solutions proposées. Ce travail de recherche a donné lieu à de nombreuses publications, communications et brevets. Aujourd'hui, la majorité des résultats obtenus ont été transférés chez STMicroelectronics, où l'étude de leur industrialisation est en cours.

Este trabalho propõe uma estratégia para projeto de circuitos VLSI operando em amplo ajuste de tensão e frequência (VFS), desde o regime em Near-threshold, onde uma tensão de VDD caracteriza-se por permitir o funcionamento do circuito com o mínimo dispêndio de energia por operação (MEP), até tensões nominais, dependendo da carga de trabalho exigida pela aplicação. Nesta dissertação é proposto o dimensionamento de transistores para três bibliotecas de células utilizando MOSFETs com tensões de limiar distintas: Regular-VT (RVT), High-VT (HVT) e Low-VT (LVT). Tais bibliotecas possuem cinco células combinacionais: INV, NAND, NOR, OAI21 e AOI22 em múltiplos strengths. A regra para dimensionamento dos transistores das células lógicas foi adaptada de trabalhos relacionados, e fundamenta-se na equalização dos tempos de subida e descida na saída de cada célula, objetivando à redução dos efeitos de variabilidade em baixas tensões de operação. Dois registradores também foram incluídos na biblioteca RVT e sua caracterização foi realizada considerando os parâmetros de processo CMOS 65 nm typical, fast e slow; nas temperaturas de operação de -40°C, 25°C e 125°C, e para tensões variando de 200 mV até 1,2V, para incluir a região de interesse, próxima ao MEP. Os experimentos foram realizados utilizando dez circuitos VLSI de teste: filtro digital notch, um núcleo compatível com o micro-controlador 8051, quatro circuitos combinacionais e quatro sequenciais do benchmark ISCAS. Em termos de economia de energia, operar no MEP resulta em uma redução média de 54,46% em relação ao regime de sub-limiar e até 99,01% quando comparado com a tensão nominal, para a temperatura de 25°C e processo típico. Em relação ao desempenho, operar em regime de VFS muito amplo propicia frequências máximas que variam de centenas de kHz até a faixa de centenas de MHz a GHz, para as temperaturas de -40°C e 25°C, e de MHz até GHz em 125°C. Os resultados desta dissertação, quando comparados a trabalhos relacionados, demonstraram, em média, redução de energia e ganho de desempenho de 24,1% e 152,68%, respectivamente, considerando os mesmos circuitos de teste, operando no ponto de mínima energia (MEP). / This work proposes a strategy for designing VLSI circuits to operate in a very-wide Voltage-Frequency Scaling (VFS) range , from the supply voltage at which the minimum energy per operation (MEP) is achieved, at the Near-Threshold regime, up to the nominal supply voltage for the processes, if so demanded by applications workload. This master thesis proposes the sizing of transistors for three library cells using MOSFETs with different threshold voltages: Regular-VT (RVT), High-VT (HVT), and Low-VT (LVT). These libraries have five combinational cells: INV, NAND, NOR, OAI21, and AOI22 with multiple strengths. The sizing rule for the transistors of the digital cells was an adapted version from related works and it is directly driven by requiring equal rise and fall times at the output for each cell in order to attenuate variability effects in the low supply voltage regime. Two registers were also included in the RVT library cell. This library cell was characterized for typical, fast, and slow processes conditions of a CMOS 65nm technology; for operation at -40ºC, 25ºC, and 125ºC temperatures, and for supply voltages varying from 200 mV up to 1.2V, to include the region of interest, for VDD near the MEP. Experiments were performed with ten VLSI circuit benchmarks: notch filter, 8051 compatible core, four combinational and four sequential ISCAS benchmark circuits. From the energy savings point of view, to operate in MEP results on average reduction of 54.46% and 99.01% when compared with the sub-threshold and nominal supply voltages, respectively. This analysis was performed for 25⁰C and typical process. When considered the performance, the very-wide VFS regime enables maximum operating frequencies varying from hundreds of kHz up to MHz/GHz at -40ºC and 25ºC, and from MHz up to GHz at 125ºC. This master thesis results, when compared with related works, showed on average an energy reduction and performance gain of 24.1% and 152.68%, respectively, for the same circuit benchmarks operating with VDD at the minimum energy point (MEP).

Este trabalho propõe uma estratégia para projeto de circuitos VLSI operando em amplo ajuste de tensão e frequência (VFS), desde o regime em Near-threshold, onde uma tensão de VDD caracteriza-se por permitir o funcionamento do circuito com o mínimo dispêndio de energia por operação (MEP), até tensões nominais, dependendo da carga de trabalho exigida pela aplicação. Nesta dissertação é proposto o dimensionamento de transistores para três bibliotecas de células utilizando MOSFETs com tensões de limiar distintas: Regular-VT (RVT), High-VT (HVT) e Low-VT (LVT). Tais bibliotecas possuem cinco células combinacionais: INV, NAND, NOR, OAI21 e AOI22 em múltiplos strengths. A regra para dimensionamento dos transistores das células lógicas foi adaptada de trabalhos relacionados, e fundamenta-se na equalização dos tempos de subida e descida na saída de cada célula, objetivando à redução dos efeitos de variabilidade em baixas tensões de operação. Dois registradores também foram incluídos na biblioteca RVT e sua caracterização foi realizada considerando os parâmetros de processo CMOS 65 nm typical, fast e slow; nas temperaturas de operação de -40°C, 25°C e 125°C, e para tensões variando de 200 mV até 1,2V, para incluir a região de interesse, próxima ao MEP. Os experimentos foram realizados utilizando dez circuitos VLSI de teste: filtro digital notch, um núcleo compatível com o micro-controlador 8051, quatro circuitos combinacionais e quatro sequenciais do benchmark ISCAS. Em termos de economia de energia, operar no MEP resulta em uma redução média de 54,46% em relação ao regime de sub-limiar e até 99,01% quando comparado com a tensão nominal, para a temperatura de 25°C e processo típico. Em relação ao desempenho, operar em regime de VFS muito amplo propicia frequências máximas que variam de centenas de kHz até a faixa de centenas de MHz a GHz, para as temperaturas de -40°C e 25°C, e de MHz até GHz em 125°C. Os resultados desta dissertação, quando comparados a trabalhos relacionados, demonstraram, em média, redução de energia e ganho de desempenho de 24,1% e 152,68%, respectivamente, considerando os mesmos circuitos de teste, operando no ponto de mínima energia (MEP). / This work proposes a strategy for designing VLSI circuits to operate in a very-wide Voltage-Frequency Scaling (VFS) range , from the supply voltage at which the minimum energy per operation (MEP) is achieved, at the Near-Threshold regime, up to the nominal supply voltage for the processes, if so demanded by applications workload. This master thesis proposes the sizing of transistors for three library cells using MOSFETs with different threshold voltages: Regular-VT (RVT), High-VT (HVT), and Low-VT (LVT). These libraries have five combinational cells: INV, NAND, NOR, OAI21, and AOI22 with multiple strengths. The sizing rule for the transistors of the digital cells was an adapted version from related works and it is directly driven by requiring equal rise and fall times at the output for each cell in order to attenuate variability effects in the low supply voltage regime. Two registers were also included in the RVT library cell. This library cell was characterized for typical, fast, and slow processes conditions of a CMOS 65nm technology; for operation at -40ºC, 25ºC, and 125ºC temperatures, and for supply voltages varying from 200 mV up to 1.2V, to include the region of interest, for VDD near the MEP. Experiments were performed with ten VLSI circuit benchmarks: notch filter, 8051 compatible core, four combinational and four sequential ISCAS benchmark circuits. From the energy savings point of view, to operate in MEP results on average reduction of 54.46% and 99.01% when compared with the sub-threshold and nominal supply voltages, respectively. This analysis was performed for 25⁰C and typical process. When considered the performance, the very-wide VFS regime enables maximum operating frequencies varying from hundreds of kHz up to MHz/GHz at -40ºC and 25ºC, and from MHz up to GHz at 125ºC. This master thesis results, when compared with related works, showed on average an energy reduction and performance gain of 24.1% and 152.68%, respectively, for the same circuit benchmarks operating with VDD at the minimum energy point (MEP).

Este trabalho propõe uma estratégia para projeto de circuitos VLSI operando em amplo ajuste de tensão e frequência (VFS), desde o regime em Near-threshold, onde uma tensão de VDD caracteriza-se por permitir o funcionamento do circuito com o mínimo dispêndio de energia por operação (MEP), até tensões nominais, dependendo da carga de trabalho exigida pela aplicação. Nesta dissertação é proposto o dimensionamento de transistores para três bibliotecas de células utilizando MOSFETs com tensões de limiar distintas: Regular-VT (RVT), High-VT (HVT) e Low-VT (LVT). Tais bibliotecas possuem cinco células combinacionais: INV, NAND, NOR, OAI21 e AOI22 em múltiplos strengths. A regra para dimensionamento dos transistores das células lógicas foi adaptada de trabalhos relacionados, e fundamenta-se na equalização dos tempos de subida e descida na saída de cada célula, objetivando à redução dos efeitos de variabilidade em baixas tensões de operação. Dois registradores também foram incluídos na biblioteca RVT e sua caracterização foi realizada considerando os parâmetros de processo CMOS 65 nm typical, fast e slow; nas temperaturas de operação de -40°C, 25°C e 125°C, e para tensões variando de 200 mV até 1,2V, para incluir a região de interesse, próxima ao MEP. Os experimentos foram realizados utilizando dez circuitos VLSI de teste: filtro digital notch, um núcleo compatível com o micro-controlador 8051, quatro circuitos combinacionais e quatro sequenciais do benchmark ISCAS. Em termos de economia de energia, operar no MEP resulta em uma redução média de 54,46% em relação ao regime de sub-limiar e até 99,01% quando comparado com a tensão nominal, para a temperatura de 25°C e processo típico. Em relação ao desempenho, operar em regime de VFS muito amplo propicia frequências máximas que variam de centenas de kHz até a faixa de centenas de MHz a GHz, para as temperaturas de -40°C e 25°C, e de MHz até GHz em 125°C. Os resultados desta dissertação, quando comparados a trabalhos relacionados, demonstraram, em média, redução de energia e ganho de desempenho de 24,1% e 152,68%, respectivamente, considerando os mesmos circuitos de teste, operando no ponto de mínima energia (MEP). / This work proposes a strategy for designing VLSI circuits to operate in a very-wide Voltage-Frequency Scaling (VFS) range , from the supply voltage at which the minimum energy per operation (MEP) is achieved, at the Near-Threshold regime, up to the nominal supply voltage for the processes, if so demanded by applications workload. This master thesis proposes the sizing of transistors for three library cells using MOSFETs with different threshold voltages: Regular-VT (RVT), High-VT (HVT), and Low-VT (LVT). These libraries have five combinational cells: INV, NAND, NOR, OAI21, and AOI22 with multiple strengths. The sizing rule for the transistors of the digital cells was an adapted version from related works and it is directly driven by requiring equal rise and fall times at the output for each cell in order to attenuate variability effects in the low supply voltage regime. Two registers were also included in the RVT library cell. This library cell was characterized for typical, fast, and slow processes conditions of a CMOS 65nm technology; for operation at -40ºC, 25ºC, and 125ºC temperatures, and for supply voltages varying from 200 mV up to 1.2V, to include the region of interest, for VDD near the MEP. Experiments were performed with ten VLSI circuit benchmarks: notch filter, 8051 compatible core, four combinational and four sequential ISCAS benchmark circuits. From the energy savings point of view, to operate in MEP results on average reduction of 54.46% and 99.01% when compared with the sub-threshold and nominal supply voltages, respectively. This analysis was performed for 25⁰C and typical process. When considered the performance, the very-wide VFS regime enables maximum operating frequencies varying from hundreds of kHz up to MHz/GHz at -40ºC and 25ºC, and from MHz up to GHz at 125ºC. This master thesis results, when compared with related works, showed on average an energy reduction and performance gain of 24.1% and 152.68%, respectively, for the same circuit benchmarks operating with VDD at the minimum energy point (MEP).