The subject of the master’s thesis is the project documentation of building work for multifunctional building. The object has three floors. The structural system of the building is bricked. The roof of the building is flat and the terraces are designed as vegetation and walking. On the mainfloor there are situated commercial spaces, building technical facilities and seven residential units. On the second floor there is space for commercial use and seven residential units and on the last floor there is also space for commercial use and one residential units.

Tato diplomová práce se zabývá návrhem multifunkční budovy, která slouží jako rozšíření haly dříve existující budovy. Areál se nachází v části Řečkovice v Brně. Práce si klade za cíl propojit budovy jak prostorově, tak vizuálně. Výrobní hala a sklad budou rozšířeny. Poslední patro bude sloužit jako administrativní část se sociálním zařízením a venkovní terasou. Proces návrhu byl plně podporován použitím technologie BIM.

This dissertation thesis concern the project of a multifunctional building in Hranice na Moravě. It is an individually standing object on a flat terrain. The building has four over-ground floors. In the first and second floor are administrative spaces. Administrative spa-ces consist of offices and meetings room. In a third and fourth floor are four flats. There is one 3+kk flat (three rooms with kitchenette) and one 2+kk flat (two rooms with kitchenette) on every floor. The double staircase is used to connect the individual floors. The building is designed from a structural system of ceramic fittings. The ceilings are assembled from ceramic fittings with reinforced concrete. This ceiling is also supporting part of single skin flat roof. The thesis contains project documentation for construction.

The subject of this diploma thesis is design documentation of a multifunctional building. The object is located in village of Vsetín, set in flat terrain. The building is divided to 3 objects. Objects A and C are designed as a residential buildings, object B is the office building. The multifunctional building is with basement, it has four above-ground floors and its roofed with warm flat roof. The structural system of a building is made from ceramic blocks Heluz Family 30 with etics, structures and ceillings are made of cast-in-place reinforced concrete. The part of documentation is fire safety assessment, thermal assessment, acoustic assessment and the daylighting assessment.

The subject of thesis is a project documentation of a single-standing multifunctional building. Object has 4 floors with no basement. Vertical load-bearing structures are designed from ceramic masonry Porotherm. Ceilings are monolithic, reinforced concrete. The roof is designed as a single-layer flat roof.

The Master’s thesis deals a project documentation of a new multifunctional building. The building is a detached. It is the three-storeyed build with attic and cellared. There are 12 flats, 2 surgeries and 6 garages. The surgeries are in the ground floor. The building is built from a Heluz system and walls are isolated by a contact thermal insulation system ETICS. Roof is a cross roof.

This diploma work is focused on the project documentation of the multifunctional building. The emphasis is put on the legal procedure and the regulations in force which are required for the project documentation of the specific multifunctional building. It is the four floor building provided without cellar which is divided into the business part and the living part. There are two shops projected in the business part which are the internet goods issuing office and the clothes shop. In the ground floor of the living part there is a living background and in the other floors there are the apartments themselves. The first floor is made of formwork âDitonâ and the other floors are build of the bricks system âPorothermâ. The peripheral walls are warmed by means of the contact heating system âBaumit Open Reflectâ.

Master’s thesis describes project documentation of a multifunctional house in Velké Meziříčí. It is the four storey basementless detached house. There are two shops, cafe and flat facilities on the first floor and 10 flats on the other 3 floors. The brick-built building consists of Diton and Heluz brickwork system insulated with Baumit external thermal insulation system. The house is covered by single ply roofing.

Master thesis „Multifunctional Building“ is composed in the form of project documentation. Designed building is situated close to the Svitava river. The supporting structure in the basement is designed from shutter shaped pieces Best and the other storages from the system Ytong. The armoured concreted slab is designed for the ceilings. The roof is drawn as platform. The whole building will be insulated for recommended values. The facade in the first storage is designed as ventilated Novabrick and in the other storeys the facade will be from plaster Cemix. The building has three storages and partly basement. The building consists of centre for rehabilitation, shop and three flats. The drawings are compiled in CAD program.

In this project, there is processed complete documentation of a new multifunctional building, Morašovice. This project is solved as operative project. The house is a three story building, partly with a basement and with attic room, which is used. The house is bricked, partly with skeleton construction elements and with wooden saddle roof. This project of the multifunctional building is focused on architectonical solution and implementation into an existing rural area. This project solves relation between disposition and static, fire protection and energy savings. All blueprints are elaborated by ArchiCAD software.