This diploma thesis is focused on design cast-in-place reinforced concrete structure multi-storey multifunctional building according to the source material. Specifically, foundation slab and external wall in B1 taking into account the waterproofness of the construction. Then staircase, column in lowest storey and two floor slab are designed as selected load-bearing structure. Elements are dimensioned according to ČSN EN 1992-1-1: Design of concrete structures - general rules and rules for building structures. In the drawing part of the diploma thesis are drawn drawings of the shapes and reinforcement.

Předmětem této diplomové práce je návrh a projektová dokumentace pětipodlažní multifunkční budovy se 2 suterénními podlažími pro parkování pro 52 aut. První 2 patra jsou veřejná - k pronájmu je 23 samostatných prostor. Horní 3 podlaží obsahují 18 bytů a mají samostatné vchody se dvěma schodišti a 2 výtahy. Budova má dvě úrovně střechy a obě jsou pochozí s malým parkem a vegetací. Budova se nachází v hlavním městě Slovenska, Bratislavě, na Obchodní ulici. Záměrem je nahradit dvě staré budovy ve velmi špatném stavu. Z architektonického hlediska má tato budova zapadat do historického vzhledu ulice úpravou tvaru oken a materiálů a zároveň působit mírně moderně. Z konstrukčního hlediska má budova rámové nosné konstrukce z betonových nosníků sloupů a obousměrně vyztužených betonových desek vyplněných dřevěnými konstrukcemi a lehké sádrokartonové příčky.

The aim of the diploma thesis is composition of project documentation for construction of multifunctional building. Object is situated on the cadastral area of Třebíč in the location Na kopcích on the eastern part of city. Terain is slightly sloping. In the multifunctional bulding there are four above-ground floor and one below-ground floor. In the below-ground floor there are situated technical and storage spaces. In the first below-ground floor there are two entrances, the first one for administrative part and second one for residential part. The first and second above-ground floor is used for administrative purposes. The third and fourth above-ground floor is used for living in flats. Above part of the third above-ground floor there is roof made of extensive green roof and above the fourth above-ground floor there is roof made of a flat roof with a classical order of layers with waterproofing layer made of PCV-P. There is a lift in the part of object with flats. The vertical construction system of the building is wall-mounted, supplemented with girders and columns. The ceiling structures are made of reinforced concrete monolithic slabs. The staircase is monolithic reinforced concrete.

The project documentation, processed in the framework of the diploma thesis, solves the new building of the multifunctional house in Žďár nad Sázavou. The building is made of traditional brick technology of brick fittings, with insulation, ceilings are reinforced concrete monolithic, roof sloping in two variants. Commercial premises are located on the ground floor on the south side. Furthermore, on the floor there are technical facilities for offices and storage space for housing units and offices. On the next floors there are always 3 residential units. The building is located on flat terrain in the rapidly developing part of the city. The building envelope and individu-al structures are designed to the entire object it was as energy- consuming as possible, and do not pump irreparably by nature its natural resources in a larger quantity than necessary.

The subject of this diploma thesis is the design of a multifunctional building, which consists of parking lots, store section, office as well as dwelling units. Multifunctional building has four above-ground floors, full basement and a flat roof. During processing, emphasis was placed on layout solutions to be designed according to legislation and standards. In the basement there are parking lots, the ground flood is used as a store section, the first floor consists of office units designed for start-up companies. The third and fourth floor consists dwelling units from one-bedroom to three-bedroom apartments. The building has a concrete frame structure combined with a masonry system from Porotherm ceramic pieces. Horizontal load bearing system is designed of two way reinforced concrete slabs. Walls bellow the ground level are made from core-filled reinforced concrete blocks. The building is supported by the spread footing concrete system. Multifunctional building is situated in flat terrain in the city of Brumov-Bylnice.

Project deals multifunctional building with facilities for the village Moutnice. Located in the center of the village Moutnice. The terrain is slightly sloping to the north. The house has two floors. The 1st floor is a library with all facilities, garage with workshop and social backgrounds, business mail with the necessary facilities. In the 2nd floor is the office of the village, pharmacy, pediatric GP, GP surgeries for adults and massage room. The house is covered with a hipped roof with a slope of 25 °. The house is made of brick technology ceramic blocks. The truss is designed wooden Hip. Tile roofing.

Multifunctional buliding is designed as a alone standing new buliding in the cadastral area of Žilina on a private plot no. 4518, Alexandra Street Rudnaya. The buidling is situated in the older part of city build in the sixties with the dominanting residental houses. Type of the multipurpose building is dominant with a residental function. The building totaly contains four apartment units. In the ground floor are offices, spaces of surgeries and access to housing and accessories. Each function has a separate entrance, which is designed for handicapped. In the basemnt of the building are designed in a common garage, basement and substation for heating domestic hot water and heating all function in the building. Enterence in to garage is designed from the east side od street Juraja Sklenara. The building is covered wich flat, monotube roof. The building has got rectangular shape which one outlet on the southeast side. Attic roof is 10,75 meters above the ground.

The Master thesis presents a design of the multifunctional building in City of Pardubice. The building has three functions: caffe house, administration and also housing. The building has four floor without basement and there is a level roof. I tis designed as a reinforced concrete frame and walls with ventilated fasade do not have a bearing function. Design of building mens the general technical requirements for the construction.

The diploma thesis focuses on the design of a new construction of a multifunctional building in Řečkovice. The construction consists of two separate blocks connected by a basement storey with common garages. Each block has three above-ground storeys. On the first basement storey there are garages and technical facilities. On the above-ground storeys there are commercial units with own entrances from the exterior and own sanitation facilities. Furthermore there are flats of varying sizes: from single-room flats with a kitchenette to four-room flats with a kitchenette. One of the flats has been designed as adaptable (wheelchair accessible). All the flats have a recessed balcony or a terrace facing southwest. The construction is built on shallow foundation constructions. The first basement storey is from monolithic reinforced concrete. The above-ground storeys are built from Kalksandstein sand-lime blocks. The exterior walls are insulated with a contact thermal insulation system. The construction is covered by flat roofs.

Master´s thesis solves the design of an object of restaurant and guesthouse in Libomyšl. The building has a rectangular shape with a additional building on the north side. The building has three floors. Above the house is designed backgrounds access service for flat roof duplex apartment located in the building. Roofing of the main part of the building is made by sloped saddleroof with ten skylights. Additional object is covered by a single layered flat roof.vered by a single layered flat roof.