This paper presents the development and study of multiple-input single-output converter (MISO) for the DC House project that utilizes a controller to maximize the overall converter’s efficiency. The premise of this thesis is to create uneven load current sharing between the converters at different loading conditions in order to maximize the efficiency of the overall MISO converter. The goal is to find a proper ratio of current from each converter to the total load current of the MISO system to achieve the greatest efficiency. The Arduino microcontroller is implemented to achieve this goal. The design and operation of the MISO converter with the proposed controller will be explained in this paper. The design and operation of the converter was tested and verified through simulation in LTSpice in addition to hardware implementation. Different ratios of current from each converter were used to fully test the MISO converter. For the 5A and 6A load current, the maximum efficiencies were reached with the 70% / 30% ratio case, with efficiencies of 94.91% and 95.07%, respectively. For 7A load current, the maximum efficiency was reached with the 60% / 40% ratio case, with an efficiency of 94.59%. The results were then compared with those obtained from the equal current sharing cases. For the cases tested, the efficiency of the unequal current sharing outperforms that obtained from the equal current sharing method.

Yes / This paper presented a planar printed multiple-input-multiple-output (MIMO) antenna with a dimension of 100 x 45 mm2. It composed of two crescent shaped radiators placed symmetrically with respect to the ground plane. Neutralization line applied to suppress mutual coupling. The proposed antenna examined both theoretically and experimentally, which achieves an impedance bandwidth of 18.67% (over 2.04-2.46 GHz) with a reflection coefficient < -10 dB and mutual coupling minimization of < -20 dB. An evaluation of MIMO antennas is presented, with analysis of correlation coefficient, total active reflection coefficient (TARC), capacity loss and channel capacity. These characteristics indicate that the proposed antenna suitable for some wireless applications.

<p> A multiple-input multiple-output (MIMO) communication system has the potential to provide reliable transmissions at high data rates. However, the computational cost of achieving this promising performance can be quite substantial. With an emphasis on practical implementations, the MIMO systems employing the low cost linear receivers are studied in this thesis. The optimum space-time block codes (STBC) that enable a linear receiver to achieve its best possible performance are proposed for various MIMO systems. These codes satisfy an intra and inter orthogonality property, and are called unitary trace-orthogonal codes. In addition, several novel transmission schemes are specially designed for linear receivers with the use of the proposed code structure. The applications of the unitary trace-orthogonal code are not restricted to systems employing linear receivers. The proposed code structure can be also applied to the systems employing other types of receivers where several originally intractable code design problems are successfully solved.</p> <p>The communication schemes presented in this thesis are outlined as follows: •For a MIMO system with N ≥ M, where M and N are the number of transmitter and receiver antennas, respectively, the optimal full rate linear STBC for linear receivers is proposed and named unitary trace-orthogonal code. The proposed code structure is proved to be necessary and sufficient to achieve the minimum detection error probability for the system. • When applied to a multiple input single output (MISO) communication system, a special linear unitary trace-orthogonal code, named the Toeplitz STBC, is proposed. The code enables a linear receiver to provide full diversity and to achieve the optimal tradeoff between the detection error and the data transmission rate. This is, thus far, the first code that possesses such properties for an arbitrary MISO system that employs a linear receiver. • In MIMO systems in which N ≥ M and the signals are transmitted at full symbol rate, the highest diversity gain achievable by linear receivers is analyzed and shown to be N - M + 1. To improve the performance of a linear receiver, a multi-block transmission scheme is proposed, in which signals are coded so that they span multiple independent channel realizations. An optimal full rate linear STBC for this system that minimizes the detection error probability is presented. The code is named multi-block unitary trace-orthogonal code. The resulting system has an improved diversity gain. Furthermore, by relaxing the code from the full symbol rate constraint, a special multi-block transmission scheme is proposed. This scheme achieves a much improved diversity gain than those with full symbol rate. • The unitary trace-orthogonal code can also be applied to a system that employs a maximum-likelihood (ML) receiver rather than the simple linear receiver. For such a system, a systematic design of full diversity unitary trace-orthogonal code is presented for an arbitrary data transmission rate. </p> <p>In summary, when a simple linear receiver is employed, unitary trace-orthogonal codes and their optimality properties are exploited for various multiple antenna communication systems. Some members from this code family can also enable an optimal performance of ML detection. </P> / Thesis / Doctor of Philosophy (PhD)

No description available.

No description available.

A novel printed diversity monopole antenna is presented for WiFi/WiMAX applications. The antenna comprises two crescent shaped radiators placed symmetrically with respect to a defected ground plane and a neutralization lines is connected between them to achieve good impedance matching and low mutual coupling. Theoretical and experimental characteristics are illustrated for this antenna, which achieves an impedance bandwidth of 54.5% (over 2.4-4.2 GHz), with a reflection coefficient <;-10 dB and mutual coupling <;-17 dB. An acceptable agreement is obtained for the computed and measured gain, radiation patterns, envelope correlation coefficient, and channel capacity loss. These characteristics demonstrate that the proposed antenna is an attractive candidate for multiple-input multiple-output portable or mobile devices

Yes / Recent studies suggest that multicarrier systems using wavelets outperform conventional OFDM systems using the FFT, in that they have well-contained side lobes, improved spectral efficiency and BER performance, and they do not require a cyclic prefix. Here we study the wavelet packet and discrete wavelet transforms, comparing the BER performance of wavelet transform-based multicarrier systems and Fourier based OFDM systems, for multipath Rayleigh channels with AWGN. In the proposed system zero-forcing channel estimation in the frequency domain has been used. Results confirm that discrete wavelet-based systems using Daubechies wavelets outperform both wavelet packet transform- based systems and FFT-OFDM systems in terms of BER. Finally, Alamouti coding and maximal ratio combining schemes were employed in MIMO environments, where results show that the effects of multipath fading were greatly reduced by the antenna diversity.

Yes / A four-element compact dual-band patch antenna having a common ground plane operating at 28/38 GHz is proposed for millimeter-wave communication systems in this paper. The multiple-input-multiple-output (MIMO) antenna geometry consists of a slotted ellipse enclosed within a hollow circle which is orthogonally rotated with a connected partial ground at the back. The overall size of the four elements MIMO antenna is 2.24λ × 2.24λ (at 27.12 GHz). The prototype of four-element MIMO resonator is designed and printed using Rogers RT Duroid 5880 with εr = 2.2 and loss tangent = 0.0009 and having a thickness of 0.8 mm. It covers dual-band having a fractional bandwidth of 15.7% (27.12–31.34 GHz) and 4.2% (37.21–38.81 GHz) for millimeter-wave applications with a gain of more than 4 dBi at both bands. The proposed antenna analysis in terms of MIMO diversity parameters (Envelope Correlation Coefficient (ECC) and Diversity Gain (DG)) is also carried out. The experimental result in terms of reflection coefficient, radiation pattern, gain and MIMO diversity parameter correlates very well with the simulated ones that show the potential of the proposed design for MIMO applications at millimeter-wave frequencies. / This work is supported by the Moore4Medical Project, funded within ECSEL JU in collaboration with the EU H2020 Framework Programme (H2020/2014-2020) under Grant Agreement H2020-ECSEL-2019-IA-876190, and Fundação para a Ciência e Tecnologia (ECSEL/0006/2019). This work is also funded by the FCT/MEC through national funds and when applicable co-financed by the ERDF, under the PT2020 Partnership Agreement under the UID/EEA/50008/2020 Project.

Yes / This paper presented a planar printed multiple-input-multiple-output (MIMO) antenna with a dimension of 100 x 45 mm2. It composed of two crescent shaped radiators placed symmetrically with respect to the ground plane. Neutralization line applied to suppress mutual coupling. The proposed antenna examined both theoretically and experimentally, which achieves an impedance bandwidth of 18.67% (over 2.04-2.46 GHz) with a reflection coefficient < -10 dB and mutual coupling minimization of < -20 dB. An evaluation of MIMO antennas is presented, with analysis of correlation coefficient, total active reflection coefficient (TARC) and capacity loss. These characteristics indicate that the proposed antenna suitable for some wireless applications.

No / This paper presented a planar printed multiple-input-multiple-output (MIMO) antenna with a dimension of 100 x 45 mm 2 . It composed of two crescent shaped radiators placed symmetrically with respect to the ground plane. Neutralization line applied to suppress mutual coupling. The proposed antenna examined both theoretically and experimentally, which achieves an impedance bandwidth of 18.67% (over 2.04-2.46 GHz) with a reflection coefficient < -10 dB and mutual coupling minimization of < -20 dB. An evaluation of MIMO antennas is presented, with analysis of correlation coefficient, total active reflection coefficient (TARC) and capacity loss. These characteristics indicate that the proposed antenna suitable for some wireless applications. Mutual Coupling Reduction of Two Elements Antenna for Wireless Applications. Available from: https://www.researchgate.net/publication/261064207_Mutual_Coupling_Reduction_of_Two_Elements_Antenna_for_Wireless_Applications [accessed Aug 1, 2017].