When designing work tasks, one goal should be to enable postures that maximize the force capabilities of the workers while minimizing the overall muscular demands; however, little is known regarding specific shoulder tissue loads during pushing and pulling. This study quantitatively evaluated the effects of direction (anterior-posterior pushing and pulling), handle height (100 cm and 150 cm), handle orientation (vertical and horizontal), included elbow angle (extended and flexed) as well as personal factors (gender, mass and stature) on hand force magnitudes, shoulder and L5/S1 joint moments, normalized mean muscle activation and electromyography (EMG)/force ratios during two-handed maximal push and pull exertions. Twelve female and twelve male volunteers performed maximal voluntary isometric contractions under 10 push and pull experimental conditions that emulated industrial tasks. Hand force magnitudes, kinematic data and bilateral EMG of seven superficial shoulder and trunk muscles were collected. Results showed that direction had the greatest influence on dependent measures. Push exertions produced the greatest forces while also reducing L5/S1 extensor moments, shoulder moments with the 150 cm height and overall muscular demands (p < 0.0001). The 100 cm handle height generated the greatest forces (p < 0.0001) and reduced muscular demands (p < 0.05), but were associated with greater sagittal plane moments (p < 0.05). Females generated, on average, 67% of male forces in addition to incurring greater muscular demands (p < 0.05). The flexed elbows condition in conjunction with pushing produced greater forces with reduced overall muscular demands (p < 0.0001). Furthermore, horizontal handle orientation caused greater resultant moments at all joints (p <. 0.05) The results have important ergonomics implications for evaluating, designing or modifying workstations, tasks or equipment towards improved task performance and the prevention of musculoskeletal injuries and associated health care costs.

Early strength increase with training is normally attributed to neural adaptations but recent evidence suggests that muscle hypertrophy occurs earlier than previously thought. The purpose of this study was to examine the time course of adaptation through 20 days of training and 5 days of detraining. Twenty-two untrained subjects trained one arm every 2nd day for 20 days. Subjects performed isokinetic eccentric biceps training at 90°/s (6 sets of 8 reps). Muscle thickness (reported in cm) via ultrasound, strength (reported in Nm) and muscle activation (electromyography) were measured before, during and after training (9 time points). Muscle thickness increased after 8 days of training (3.66±0.11 to 3.90±0.12; p<0.05) and remained above baseline until the end of training (3.97±0.12). After 5 days of detraining muscle thickness decreased (3.97±0.12 vs. 3.85±0.11; p<0.05), but remained higher than baseline (p<0.05). Muscle thickness did not change significantly in the untrained arm at any time point. Strength in the trained arm decreased after 8 days of training (65.6±4.1 to 57.5±3.5; p<0.05) and remained suppressed throughout the study. Muscle activation amplitude increased after 14 days of training (p<0.05) and remained elevated throughout the study. In conclusion, biceps muscle thickness increases very rapidly with frequent intense eccentric training although this type of training appears to impair strength. These findings provide additional evidence that muscle hypertrophy may occur much faster than has been generally accepted.

When designing work tasks, one goal should be to enable postures that maximize the force capabilities of the workers while minimizing the overall muscular demands; however, little is known regarding specific shoulder tissue loads during pushing and pulling. This study quantitatively evaluated the effects of direction (anterior-posterior pushing and pulling), handle height (100 cm and 150 cm), handle orientation (vertical and horizontal), included elbow angle (extended and flexed) as well as personal factors (gender, mass and stature) on hand force magnitudes, shoulder and L5/S1 joint moments, normalized mean muscle activation and electromyography (EMG)/force ratios during two-handed maximal push and pull exertions. Twelve female and twelve male volunteers performed maximal voluntary isometric contractions under 10 push and pull experimental conditions that emulated industrial tasks. Hand force magnitudes, kinematic data and bilateral EMG of seven superficial shoulder and trunk muscles were collected. Results showed that direction had the greatest influence on dependent measures. Push exertions produced the greatest forces while also reducing L5/S1 extensor moments, shoulder moments with the 150 cm height and overall muscular demands (p < 0.0001). The 100 cm handle height generated the greatest forces (p < 0.0001) and reduced muscular demands (p < 0.05), but were associated with greater sagittal plane moments (p < 0.05). Females generated, on average, 67% of male forces in addition to incurring greater muscular demands (p < 0.05). The flexed elbows condition in conjunction with pushing produced greater forces with reduced overall muscular demands (p < 0.0001). Furthermore, horizontal handle orientation caused greater resultant moments at all joints (p <. 0.05) The results have important ergonomics implications for evaluating, designing or modifying workstations, tasks or equipment towards improved task performance and the prevention of musculoskeletal injuries and associated health care costs.

The stapedius muscle, which is located in the middle ear, goes into contraction when the ear is exposed to high sound intensities. This muscle activation is called ‘the acoustic reflex’. Measurement of the acoustic reflex is clinically of importance since it can reveal diagnostic information about the middle ear’s pathologies. Moreover, this muscle-activation alters the acoustic characteristics of the middle ear (i.e. the acoustic impedance and the power reflectance), which in turn, can significantly manipulate one’s perception of sounds. In the present study, these acoustic characteristics are measured in the ear canal by means of absorbance measures using equivalent Thevenin circuit theory. The quantities are then compared to form the shift responses between the baseline (before the activation) and the post-activator effect. This project investigates the shifts in power reflectance and admittance of the middle ear caused by the stapedius-muscle contraction. The wideband characterization (0.1- 8 kHz) of these acoustic reflex-induced shifts is achieved using chirp signals as a probe and through ipsilateral broadband noise activator. The data acquisition and signal processing of the project are carried out using MATLAB software. The hardware consists of National Instruments USB-6212 data acquisition interface and low noise microphone system Etymotic Research ER-10B+. A group of 10 adults including 5 males and 5 females are recruited as the participants for the project. The measurements of the reflectance shifts indicate that the most robust frequency region affected by the acoustic reflex is up to 4 kHz whereas for the admittance shifts, this region is up to 2 kHz. In addition, it is shown that the stapedius-muscle contraction leads to the attenuation of the lowfrequency transmission into the middle ear (less than 1 kHz) consistent with a stiffnesscontrolled system in this range of frequencies. In contrast, the results imply that the activation of the stapedius muscle leads to a slight enhancement of the frequency transmission in the range of 1-4 kHz (corresponding to the speech frequency band). These findings suggest a beneficial role for the stapedius-muscle contraction in the perception of speech during vocalization. Furthermore, the implemented methods in this project  can be useful in better understanding the effect of the stapedius-muscle contraction on the speech perception both in normal hearing and hearing impaired persons.

Patellofemoral pain syndrome (PFPS) is the most common injury in runners and has a significant female sex bias. Current evidence suggests that several proximal factors, including hip muscle strength, hip muscle activation, and hip kinematics during running, play a large role in the development of PFPS, particularly in females. However, the relationships between these variables are unclear. A better understanding of these relationships in both males and females could help clinicians develop targeted interventions for this syndrome. Thus, this dissertation is comprised of four studies aimed to better understand the relationships between these risk factors. The first study investigated whether there are any relationships between hip muscle strength and hip muscle activation during running. Overall, hip muscle strength and hip muscle activity during running do not appear to be strongly related. The second study used a multiple regression approach to look for predictors of hip adduction and hip internal rotation during running. Sex was a significant predictor in both models, and running speed, static subtalar inversion range of motion, and gluteus maximus amplitude were significant predictors in the hip adduction model. The third study examined the effect of decreasing hip abduction strength on running kinematics and hip muscle EMG. After the fatigue protocol, there were no changes in gluteus medius amplitude or timing, and no changes in hip kinematics during running. However, there were some changes in kinematics, particularly at the trunk, as well as differences in gluteus maximus and tensor fascia latae activation. Finally, the fourth study used an alternative biomechanical method called continuous relative phase (CRP) to investigate the effect of sex and decreasing hip abduction strength on CRP variability at the hip. Decreasing hip abduction strength increased frontal plane CRP variability from 20-40% of stance phase, primarily in females, and females demonstrated less CRP variability than males in the frontal plane and transverse planes. Overall, the results from this study improve our understanding of the relationships between hip strength, hip muscle activation, and hip kinematics during running in both males and females, which may have implications for knee injury rehabilitation strategies. This dissertation includes unpublished co-authored material.

The physical demands of archery involve strenuous movements that place repetitive mechanical loads on the upper body. Given that bone remodels in response to mechanical loading (Ruff, 2008), it is reasonable to assume that repetitive bow and arrow use impacts upper limb bone morphology in predictable ways. The introduction and increased use of archery have been suggested to impact bilateral humeral asymmetry (Rhodes and Knüsel, 2005; Thomas, 2014). However, this claim is yet to be tested in vivo. This project aims to use kinematic and electromyographic approaches to validate claims inferring that, 1. archery places mechanical loading on the non-dominant arm resulting in lowered asymmetry, and 2. the dominant arm in archery has more mechanical loading placed in the anterior-posterior direction while the non-dominant arm has more mechanical loading placed in the medial-lateral direction. Some muscles (i.e. Pectoralis major and posterior Deltoid) act symmetrically on both humeri, while most muscle groups (i.e. Biceps brachii, Triceps brachii, Deltoid (lateral), and Latissimus dorsi) are activated asymmetrically on the humerus. On the whole, asymmetrically acting muscle groups acting on separate arms result in similar overall directional bending. Therefore, the overall cross-sectional shape of the bone would be similar for the draw and bow arm. Repeated bow use would undoubtedly induce humeral modification consistent with increased non-dominant arm robusticity, which in turn would lower asymmetry. Findings from this project thus support the hypothesis that the adoption of the bow and arrow results in decreased humeral asymmetry and strengthen morphological approaches to behavioral reconstruction.

This master‘s thesis deals with computational modelling of human vocal folds in phonation position using finite element method. There are described larynx anatomy, voice generation theories and overview of so far published computational models of vocal folds. Next part of the paper deals with a redesign of vocal folds and soft tissues‘ geometry, creation of finite element mesh and implementation of active stress in thyroarytenoid muscle. The problem was solved using Ansys 19.2 software. Computation of stress and deformation of soft tissues in phonation position has been made for 7 variations with different combination of active cartilages and muscles. Lastly, there was evaluated an effect of different cartilages and active muscle stress to final stress and deformation of soft tissues of vocal folds.

Functional limitation, postural stability, and muscle recruitment of different categories of obesity were evaluated while performing an assembly workstation task. Three workstations, those designed for the 5th, 50th, and 95th percentile workers based on anthropometric data tables, were included in the study. Functional limitation was measured using electro-goniometers and the maximum frontal functional reach (MFFR) evaluation to measure the difference in joint angles, forces plates were used to study the differences in postural stability, and EMG was used to evaluate the muscle recruitment of the soleus, frontal deltoid, and trapezius muscles. Also, a regression analysis was performed to evaluate if production efficiency rate could be predicted based on body mass index (BMI) group, gender, pace type, workstation configuration and 13 body dimensions. The results revealed that the body joint angles and muscle activation parameters were not significantly different based on the main factor BMI groups; however, significant differences were found in the two-way interactions of the BMI groups and the other factors. In regard to postural stability, the results indicated that the obese class 2 and obese class 3 groups anterior posterior sway was significantly larger than the normal weight groups. The results also revealed differences based on gender for the joint angles and muscle activation when performing the small part assemblies; however, postural sway was not affected by gender differences. Pace type (self –paced or timed-paced) significantly affected the postural stability and muscle activation when performing the work task. These differences in pace type were most prevalent when comparing the 95th percentile workstation configuration against the 5th percentile workstation configuration. In regards to productivity, gender, weight, waist-to-hip ratio and pace type seem to have a large role in the production efficiency rate. Even though an individual's BMI and the workstation layout were found to impact the body functional limitation and stability, the results showed that it doesn't affect production efficiency rate performance.

Exoskeletons can be helpful to patients who suffer from muscular dysfunctions. Recent studies focus on exoskeletons which can perform complex human movements. Further analysis is needed in the area of unusual movements like obstacle clearance to design an assistive device which can deliver effective aid to the intended patients in need. It is necessary to understand the behavior of lower limb muscles when they are subjected to complex physical activity. This study is aimed to analyze the activity of muscles in the lower body during obstacle clearance. Two different levels of obstacle have been maintained, analyzed and compared with a normal gait. The muscle groups taken for the study are quadriceps, hamstrings and plantar flexors. The primary hypothesis is that the quadriceps, Hamstrings, and dorsi flexors tend to have higher muscle activation while performing a complex physical task like stepping over an obstacle with the heights of 20 cms and 36 cms than a normal walking gait. The muscles from those three mentioned groups contribute more to the obstacle clearance compare to that of normal gait. Further research is recommended to expand knowledge about muscle activation.

Special Weapons and Tactics (SWAT) officers constitute a subgroup of specialized law enforcement officers that perform a variety of tactical operations while wearing approximately 40 kg of tactical gear. Lower back pain is a prevalent musculoskeletal injury suffered by SWAT officers. Tactical gear places significant stress on the lower back. Thus, it is important to quantify the effect that tactical gear has on muscle activation levels of torso musculature while performing occupational tasks. Electromyography was evaluated on 20 male subjects (age: 34.7±4.5 yr.; height: 1.79±.10 m; body mass: 91.53±17.32 kg; mass of gear: 13.82±1.90 kg) while performing four tactical tasks (standing, rifle walk, sitting, & shield walk) with and without gear. Electromyography was evaluated bilaterally on the erector spinae, rectus abdominis, and external oblique muscles. The dominant erector spinae (mean delta: +0.16%) and external oblique (mean delta: -0.124%) demonstrated significant changes in muscle activation with the addition of gear, which may indicate increased spinal compression. There were also trends of increased co-activation of core musculature with the addition of gear. The rifle walk and shield walk task mean muscle activations were significantly higher than the standing and sitting tasks. The shield walk produced the highest mean activations for each muscle. Physical training for SWAT officers should emphasize exercises that simulate task-specific movement patterns without gear to decrease the spinal compression associated with load carriage.