Les copolymères à blocs (BCP) sont des macromolécules capables de s’auto-assembler produisant des morphologies bien définies à l’échelle nanométrique. Un certain nombre de leurs propriétés macroscopiques peuvent être largement modifiées par des effets de confinement à l’échelle moléculaire, mais aussi par des effets de cisaillement (l’orientation des structures et donc un comportement mécanique fortement anisotrope). L’une des technologies permettant d’étudier ces effets sur la structuration des BCP est la coextrusion multinanocouches, qui permet de produire à grande échelle des matériaux sous forme de films possédant deux ou plusieurs constituants organisées en milliers de couches alternées ayant chacune une épaisseur nanométrique. À l’aide de ce procédé, des films constitués du tribloc poly(méthacrylate de méthyle-b-butyle acrylate-b-méthacrylate de méthyle) et des homopolymères polyméthacrylate de méthyle, polystyrène et polycarbonate (ayant donc différentes interfaces) ont été fabriqués en variant la composition du mélange et les conditions de coextrusion afin d’obtenir différentes épaisseurs du film (et donc différentes épaisseurs de couche). Une caractérisation multi-échelle a été effectuée en couplant différentes techniques, notamment AFM, MET (après une étape préalable de marquage) et SAXS. Elle a permis d’identifier les structures locales au sein des couches et de mieux comprendre la relation procédé-structure-propriétés suite à des essais en traction uni-axiale montrant de meilleures propriétés dans le cas de structures multicouches. Une faible stabilité thermique, à de temps comparables à ceux du procédé, a montré une influence sur la structuration de ce type de BCP. Nous avons mis en évidence un changement dans la morphologie du tribloc à partir d’une structure lamellaire, lorsque le matériau se trouve dans un état proche de l’équilibre thermodynamique, vers une structure cylindrique au sein du système multicouche et maintenue, quelle que soit l’épaisseur de couche, à grande distance. La maitrîse des procédés de transformation de matériaux à base de polymère à l’échelle micro ou nanométrique prend ainsi toute son importance afin de mieux contrôler, dans le cas des BCP, la structuration lors d’une production à grande échelle de matériaux hiérarchisés constitués de ces matériaux, ce qui influence fortement leurs propriétés macroscopiques. / Block copolymers (BCP) have proven to be of great interest, especially for their ability to spontaneously self-assemble in ordered and well-defined nanostructures. Some of their macroscopic properties can be altered by physical effects such as confinement (constraining domains at molecular scale) or shear (predominant orientation of domains with anisotropic mechanical response). Here, the study of these effects over the BCP structuration is achieved by using an industrially scalable technique, nanolayer coextrusion, which allows fabrication of macroscopic films made of thousands of alternating layers with individual thickness tuned down to a few tens of nanometers. Films are then coextruded using the triblock : poly(methyl methacrylate-b-butyl acrylate-b-methyl methacrylate) and the polymers : polymethyl methacrylate, polystyrene and polycarbonate (having different interfaces) by varying weight proportions and process parameters to target different layer thicknesses. A multi-scale characterization by coupling different technics as AFM, TEM (after samples staining) and SAXS allowed the local identification of nano-domains and the better understanding of process-structures-properties relation as a result of tensile tests showing improved mechanical behavior for these films. A low thermic stability for comparable process times showed a clear influence over structuration of this kind of BCP. We have observed a change in the triblock morphology from lamellar structures, when it is a close to thermodynamic equilibrium state, to cylindrical structures within the multilayer system which is maintained over long distances indistinct of layer thickness. The well understanding of the forming process parameters to create polymer-based materials at micro- or nanoscale scale is therefore an important factor in order to control nano-structures during a large-scale production of hierarchized materials consisting of BCP, which could strongly influence their macroscopic properties.

No description available.

Photocarriers in semiconductors excited by modulated laser sources give rise to charge diffusion waves that can be used to study and characterize the electronic transport properties of materials and devices. In this talk the concept of carrier diffusion waves (CDW) will be introduced for continuous-band semiconductors (e.g. Si); and of hopping diffusion waves in nanolayers (e.g. colloidal quantum dot (CQD) excitonic ensembles).

This dissertation work focuses on the processability improvement of B4C, especially the compaction and sintering improvement of B4C by applying a Ni-B nanolayer coating on individual B4C particles. A modified electroless coating procedure was proposed and employed to coat nanometer Ni-B layer onto micron-sized B4C particles. The thickness was able to be tuned and controlled below 100 nm. Key parameters, including the amount of nickel source, the amount of the surface activation agent (PdCl2), the amount of the complexing agent (C2H8N2), and the addition rate of the reducing agent (NaBH4) were studied. When the targeted thickness was 5 nm, a continuous and uniform nanolayer coating was obtained with the optimal condition of individual parameter combined. Reduction of the as-coated B4C powder in a H2-Ar atmosphere was studied between 400-900C to reduce the surface oxides' Ni2O3 and B2O3. Reduction at 800C in hydrogen atmosphere was found to be the most effective condition to remove oxygen in the coating layer, with Ni2B as the reduction product. Compaction of the as-received, separated and uncoated, and separated with Ni-B coating B4C powders using uniaxial die compaction and combustion driven compaction (CDC) techniques was studied. CDC technique showed the advantage over the traditional uniaxial die compaction by yielding much higher green density and green strength (73% vs. 53.8% green density for the Ni-B coated B4C). Among compacts obtained from the same technique, Ni-B coated B4C compact yielded the densest packing with crack-free compact surface and the highest strength, demonstrating more bonding between B4C particles provided by Ni-B surface coating. Sintering of the Ni-B coated B4C in an Ar atmosphere between 1150 - 1600C with soaking time of 2 hrs and 10 hrs was studied. Liquid phase was found to form during the sintering process. Density measurement showed that the liquid phase Ni-B formed greatly facilitated B4C densification. Considerable density increase and inter-granular connection was achieved when sintered at 1600C for 10 hrs. The density enhancement by Ni-B coating was supported by transmission electron microscopy-energy dispersive spectroscopy (TEM-EDS) examination which showed that there was B4C species diffusion into liquid Ni-B phase. This liquid phase enhanced the diffusion of B4C species and formed strong bonding between B4C grains by dissolving small B4C particles and sharp edge and corners of B4C particles. Strength test demonstrated that the Ni-B coating dramatically improved the strength of B4C compacts by yielding a much higher strength of the Ni-B coated samples than the uncoated samples (13.97 vs. 1.79 MPa for the uinaxial die compacted samples, 27.03 vs. 2.21 MPa for the CDC samples). Electrical conductivity Ni-B coated B4C samples was also shown to be improved with the electrical resistivity being reduced from infinite for pure B4C samples to 1.8Ã 10-3 Ω·m for the Ni-B coated samples. This research work has shown that with the Ni-B coating, B4C densification can start at a temperature as low as 1600C via a liquid phase sintering process. / Ph. D.

No description available.

This work aimed at the utilization of chemical principles for stabilization of self-assembled monolayers (SAMs) of carboranethiol derivatives on a flat gold surface. Ideas employing surface confined coordination complex formation and dipole-dipole intermolecular interactions were outlined and the respective literature survey was compiled. Preliminary experiments were carried out to test for their feasibility and surfaces modified with self assembled monolayers proved very sensitive to reaction conditions ordinarily used for bulk synthesis. The chemical sensitivity of the studied surfaces, the necessity of using appropriate surface-sensitive analytical techniques and the depth of the problem initially defined made this task both advanced and challenging. The formation of intermolecular coordination complexes with ω-carboxylated SAMs of meta-carborane-9-thiol was chosen to answer those issues, extending the previous work of the author on carboxylated carboranethiol isomers presented in his bachelor thesis. Concepts different of those based on coordination chemistry are briefly discussed as well, but more as prospects for future work and to present this work in a broader context to which it belongs. Characterization of molecules assembled on a surface in a single layer requires surface sensitive...

No description available.

No description available.