No description available.

No description available.

Traditional methods of synthesizing inorganic materials, such as hydrothermal, sol-gel, calcination and grinding steps, can typically require use of high temperatures, expensive precursors or use of solvents. Because of the energy-intensive nature or environmental impact these techniques, there is a push, especially from an industrial perspective, to move towards greener approaches. Mechanochemistry is a solvent-free alternative technique that can be used to synthesize a variety of materials under ambient conditions. Due to this, there is an increase in attention towards the use of this approach in both solid-state inorganic and organic chemistry. This dissertation reports the mechanochemical synthesis of a few inorganic materials without the need of using high temperatures or solvents. Additionally, examples are presented in which mechanochemistry is used in conjunction with a secondary technique. This mechanical activation of the precursors lead to a decrease in calcination temperature and reactions times, as well as alteration of properties or unique reaction products. The synthesis of kaolinite, vanadia nanostructures, and spinels were carried out in this fashion. Mechanical activation of the precursors allowed for reduced hydrothermal treatment times in case of both kaolinite and vanadia nanostructures and the spinels are calcined at lower temperature for shorter periods of time. In addition, we report alternative template agents than previously reported for the formation of vanadia nanotubes, and report the formation of nanorods. Choosing the appropriate amine template can alter the structure and size of the material. Isomorphously substituted mixed oxides, kaolinite and spinels (MgAl2O4 and ZnAl2O4) were synthesized through a mechanically assisted process. Kaolinites are treated hydrothermally iv for 1 week at 250 ºC to produce an X-ray pure crystalline material. The spinels undergo calcination as low as 500 ºC to produce a nanocrystalline material. Rare-earth metals and transition metals were used as the substitutional atom. The substituted kaolinites exhibit strong order along the c axis, but less ordering along the a and b axes. Trivalent chromium and trivalent rare-earth metals, such as La, Ce, Pr, Nd, Eu, Gd, Ho, and Er, are used to replace aluminum in the structure. Likewise, divalent and trivalent transition, such as Mn, Ni, Cu and Cr, are used as the substitutional atoms in MgAl2O4 and ZnAl2O4. Cathodoluminescence studies on the substituted Spinel structure show that Mn 2+ ions can occupy both the tetrahedral or octahedral holes to give a green and red emission, respectively. On the other hand, Cr3+ ions only occupy the octahedral holes to yield a red emission, similar to that in ruby. These isomorphously substituted materials may have potential applications in catalysis or glaze materials in ceramics. Oxidized graphite, an alternative to graphite oxide and graphene, can be synthesized rapidly by mechanochemical means. Grinding urea hydrogen peroxide adduct with graphite without the need of a solvent produces a product with an oxygen content of 5-15 wt%. The byproducts of this reaction are urea and water. This material is oxidized along the edges of the sheets, allowing it to be hydrophilic while retaining the conductivity. The material can suspend in water and processing allows for films of resistivities between 50 Ω cm-2 and 10 kΩ cm-2 . It was determined that the edges are fully oxidized to yield –COOH groups. This process offers a scalable, environmentally benign route to large quantities of oxidized graphite. An alternative method for the synthesis of nanostructured vanadia is reported. This process involves mechanical grinding of vanadium pentoxide, V2O5, with an amine template, v such as diphenylamine, theophylline, rhodamine 6G and rhodamine, prior to hydrothermal treatment. This allows for the synthesis of VOx nanotubes and nanorods dependent on which template is used. Diphenylamine, theophylline, and rhodamine B produce nanorods. Use of rhodamine 6G produces asymmetric VOx nanorods. In addition to the mixed metals oxides mentioned above, sodium and calcium tantalates are synthesized mechanically. This route does not require the need of elevated temperatures or expensive and hazardous materials. X-ray diffraction analysis of NaTaO3, Ca2Ta2O7, Ca4Ta2O9 and CaTa2O6 shows that these are the only phases detected after 4 h, 10 h, 27 h and 10 h of milling, respectively. During the synthesis of Ca2Ta2O7, an intermediate phase, Ca4Ta2O9, forms within 1 h, which reacts after 5 h to form the desired product. Reference Intensity Ratio analysis shows that the material synthesized mechanically is nanocrystalline Ca2Ta2O7. Nanocrystalline ZrSi2 can also be obtained through mechanochemical synthesis. This method allows for size control and results in crystallites ranging from 9 to 30 nm. Dilution with CaCl2 enables the size control process. A linear relationship exists between the concentration of CaCl2 and the crystallite size. Contrary to a typical self-propagating metathesis reaction, this process does not allow for self-propagation and requires continuous input of mechanical energy to continue. However, this method allows for non-passivated nanoparticles of ZrSi2, which can be incorporated into composites as a reinforcement material for several applications. Hard and ultra-compressible borides, such as ReB2 and OsB2, can be synthesized mechanically. The traditional synthesis of ReB2 requires excess boron due to treatment at high temperatures. This can lead to amorphous boron aggregating at the grain boundaries, which in vi turn, this would degrade the properties of the material. The mechanochemical approach requires mechanical treatment of Re and B powders in stoichiometric quantities for 80 h. Mechanical synthesis of OsB2 powders requires a 1:3 ratio of Os and B powders. After 12 h of milling time, h-OsB2 begins to form, and is the major phase present after 18 h. The lattice parameters corresponding to the hexagonal OsB2 were determined to be a = b = 2.9047 Å, c = 7.4500 Å, α = β = 90º, γ = 120º. Treatment of the OsB2 powder at 1050 ºC under vacuum for 6 days did not induce a phase change, suggesting the hexagonal phase is very stable. Mechanocatalysis of the depolymerization of cellulose and hydrogenation of olefins over BN are reported as well. Heterogeneous catalysis is difficult to apply to solids, such as cellulose. However, mechanical grinding of kaolin and cellulose allows for the catalysis to occur in the solid state. This process allows for a variety of different biomasses to be used as feedstock without inhibition. Kaolinite was found to be the best acid catalyst due to high surface acidity and its layered structure, allowing for up to 84% conversion of the cellulose to water-soluble compounds. This process allows for reduction of waste, insensitivity of feedstock, multiple product pathways and scalability. Hydrogenation reactions are carried out using transition-metals catalysts. These metals have desirable catalytic properties not seen in main group elements, but there is growing concern over their use. A metal-free heterogeneous hydrogenation catalyst based on frustrated Lewis pairs would significantly reduce the health, environmental, and economic concerns associated with these metal-based catalysts. We report the first metal-free heterogeneous hydrogenation catalyst. Hydrogenation of trans-cinnamic acid is carried out over defect-laden h-BN. The vii reactor we use is designed to maximize the defects produced in BN sheets. The introduction of defects in BN creates frustrated Lewis pairs. DFT calculations show that the carbon double bond is weakened over boron substitution for nitrogen sites, vacancies of both boron and nitrogen, and Stone-Wales defects. A new method for crystalline germanium deposition occurring at lower temperatures (210-260 ºC) is reported. This method involves mechanical treatment of the precursors to reduce the particle size. A ground mixture of Ge and CuI are heated under vacuum to synthesize GeI2. In situ disproportionation of this compound at 210 ºC allows for the deposition of polycrystalline Ge films onto a both glass and polymer substrates. The rate of deposition is found to be 25 ng min-1 . The byproducts of this process are GeI2, GeI4 and Cu3Ge, which are valuable precursors for the synthesis of germanium nanostructures and organogermanium compounds. Mechanochemistry is also utilized for the synthesis of trisubstituted pnictides. Mechanochemical treatment of bromobenzene with either Na3Sb or Na3Bi allows for the formation of triphenylstibine or triphenylbismuthine, respectively. The synthesis of the alkali metals pnictide precursors is reported as well. The synthesis of triphenylstibine produces SbPh3 as the major product from the reaction. The synthesis of triphenylbismuthine produces more Wurtz-type coupling products, which are due to the BiPh3 acting as a catalyst. Tributyl and triphenyl analogues are reported as well. The trialkylated analogues for both Sb and Bi produce more Wurtz type coupling products. This would allow for a more cost effective and scalable, alternative methods than what is currently in use today

Nanocrystalline metal/metal oxide is an important class of transparent and electronic materials due to its potential use in many applications, including gas sensors. At the nanoscale, many of the phenomena observed that give nanocrystalline semiconducting oxide enhanced performance as a gas sensor material over other conventional engineering materials is still poorly understood. This study is aimed at understanding the low temperature electrical and chemical properties of nanocrystalline SnO2 that makes it suitable for room temperature gas detectors. Studies were carried out in order to understand how various synthesis methods affect the surfaces on the nano-oxides, interactions of a target gas (in this study hydrogen) with different surface species, and changes in the electrical properties as a function of dopants and grain size. A correlation between the surface reactions and the electrical response of doped nanocrystalline metal-oxide-semiconductors exposed to a reducing gas is established using Fourier Transform Infrared (FTIR) Spectroscopy attached to a specially built custom designed catalytic cell. First principle calculations of oxygen vacancy concentrations from absorbance spectra are presented. FTIR is used for effectively screening of these nanostructures for gas sensing applications. The effect of processing temperature on the microstructural evolution and on the electronic properties of nanocrystalline trivalent doped-SnO2 is also presented. This study includes the effect of dopants (In and Ce) on the growth of nano-SnO2, as well as their effects on the electronic properties and gas sensor behavior of the nanomaterial at room temperature. Band bending affects are also investigated for this system and are related to enhanced low temperature gas sensing. The role and importance of oxygen vacancies in the electronic and chemical behavior of surface modified nanocrystalline SnO2 are explored in this study. A generalized explanation for the low temperature gas sensor behavior of nanocrystalline oxide is presented that can be generalized to other nano-oxide systems and be useful in specific engineering of other nanomaterials. Deeper understanding of how nano-oxides react chemically and electronically would be extremely beneficial to issues present in current low cost, low temperature sensor technology. Ability to exactly monitor and then engineer the chemistry of nanostructures in the space charge region as well as the surface is also of great significance. Knowledge of the mechanisms responsible for enhanced sensor response in this material system could viably be applied to other material systems for sensor applications.

Safe drinking water is essential for life, yet at least two billion people around the world consume water contaminated with pathogens among other pollutants. Standard methods like polymerase chain reaction (PCR) and membrane filtration have been developed to detect enteric pathogens in water. However, these methods are limited in their accessibility due to long wait times to obtain results, and the requirements of skilled expertise, electricity, and laboratory equipment. This research has focused on addressing some of these limitations by analyzing the mechanisms of work and optimizing an indirect colorimetric nanosensor developed in previous research. The colorimetric nanosensor investigated herein relies on a competitive binding mechanism. When positively charged gold nanoparticles coated with polyethyleneimine (PEI-AuNPs) are added to a water sample containing negatively charged Escherichia coli (E. coli) and β-galactosidase (β-Gal) enzyme, the PEI-AuNPs will preferably bind to E. coli. This leaves β-Gal free in solution to hydrolyze chlorophenol red β-D-galactopyranoside (CPRG) (a substrate added to the water sample). The hydrolysis reaction of CPRG results in changing the solution color and the magnitude of this color change is a function of the amount of E. coli present in a water sample. It was hypothesized herein that the governing factor for the nanosensor functionality is the surface charge/Coulombic interactions rather than the nanoparticle composition or the type of chemical coating on the nanoparticle surface. To test the research hypotheses, positively charged nanoparticles with different compositions and chemical coatings as well as positively charged polymers were tested herein as potential detection agents for E. coli in water using the competitive binding assay reported in the literature with some modifications. This study produced three main findings that support the research hypotheses. First, gold nanoparticles (AuNPs) were not critical to the nanosensor functionality – other positively charged nanoparticles of silver and iron oxide coated with branched PEI were able to detect E. coli as low as 105 and 107 CFU/mL, respectively. Second, the branched PEI polymer itself (i.e., without a nanomaterial) detected E. coli at 107 CFU/mL. Third, in the absence of E. coli, (1-Hexadecyl) Trimethylammonium Bromide (CTAB), a positively charged polymer, inhibited the hydrolysis of CPRG by β-Gal. This inhibition suggests that other positively charged polymer types have potential applications in colorimetric detection assays that are based on the competitive binding mechanism. The observed behavior with the aforementioned sensing agents indicated that the positive charge was likely responsible for the detection of microbes using this competitive binding detection approach rather than the type of the chemical coating/agent used. These findings open possibilities for more types of recyclable and cost effective nanomaterials and polymers to be developed for detection of E. coli using this competitive binding approach. Furthermore, research is warranted for optimizing the sensing agents tested in this study to lower their detection limit and assess their recyclability.

Access to clean water is one of the world's foremost challenges that has been addressed on a large scale by membrane-based separation processes for the last six decades. Commercial membrane technology within one operation, reverse osmosis, has remained consistent since the late 1970s, however within the last two decades, access to nanotechnology has created a realm of study involving thin film nanocomposite (TFN) membranes, in which nanoparticles are incorporated into existing membrane designs. Desirable properties of the nanoparticles may positively impact qualities of the membrane like performance, anti-fouling behavior, and physical strength. In the present work, two types of nanoparticles have been evaluated for their potential as TFN additives: cellulose nanocrystals (CNCs) and metal-organic framework (MOF) nanorods. CNCs were chosen due to their high aspect ratios, mechanical strength, and potential for surface functionalization. MOF nanorods are also of interest given their aspect ratios and potential for functionalization, but they also possess defined pores, the sizes of which may be tuned with post-synthetic modification. Both CNCs and MOF nanorods were incorporated into TFN membranes via interfacial polymerization, and the resulting membranes were characterized using a variety of techniques to establish their performances, but also to gain insight into how the presence of each nanoparticle might be affecting the membrane active layer formation. A resulting CNC membrane (0.5 wt% loading) exhibited a 160% increase in water flux and an improvement in salt rejection to 98.98 ± 0.41 % compared to 97.53 ± 0.31 % for a plain polyamide control membrane. Likewise, a MOF nanorod membrane (0.01 wt% loading) with a high ratio of acid chain modification exhibited a 95% flux increase with maintained high salt rejection. For the CNCs, the flux increase is attributed to the formation of nanoscale voids along the length of each particle that form during the interfacial polymerization. These nanochannels introduce new rapid water transport pathways within the active layer of each membrane while maintaining ion rejection. The proposed mechanism for the MOF nanorods also introduces nanochannels into each membrane, but the presence of each nanorod's pore structure may offer another transport pathway for water molecules, one that varies with pore size. In combination, these results have allowed the study of molecular transport of water molecules and various ion species within the active layer of a thin film composite RO membrane. Understanding these phenomena will allow the development of smarter membrane materials to address present-day and future separations challenges. Carbon nanotubes are also demonstrated as surface modifiers for forward osmosis (FO) membranes to address issues unique to the FO process, namely reverse solute flux (RSF). This method shows promise, as a coating density of 0.97 g/m2 reduced RSF for many draw solution species, including a 55% reduction for sodium chloride. / Doctor of Philosophy / Access to clean water is one of the world's foremost challenges that has been addressed on a large scale by membrane-based separation processes for the last six decades. Commercial membrane technology within one operation, reverse osmosis, has remained consistent since the late 1970s, however within the last two decades, access to nanotechnology has created a recent realm of study in which nanoparticles are incorporated into existing membrane designs. It is desired to use nanotechnology, or nanoparticles to improve membrane performance, i.e. create a membrane with better rejection of unwanted ions or contaminants or improve the amount of water that passes through the membrane. In the present work, two types of nanoparticles have been evaluated for their potential as TFN additives: cellulose nanocrystals (CNCs) and metal-organic framework (MOF) nanorods. Both CNCs and MOF nanorods were incorporated into membranes and the resulting membranes were characterized using a variety of techniques to establish how the nanoparticles affected performance. A resulting CNC membrane (0.5 wt% loading) exhibited a 160% increase in water flux (the amount of water passing through an area in a given amount of time) and an improvement in salt rejection. Likewise, a MOF nanorod membrane with a high ratio of acid chain modification exhibited a 95% flux increase with maintained high salt rejection. For both the CNCs and the MOFs, these performance changes are attributed to new pathways within each membrane for water flow that exist due to the presence of the nanoparticles in each system. In combination, these results have allowed the study of transport of water molecules and various ion species in each membrane. Understanding these results will allow the development of smarter membrane materials to address present-day and future separations challenges.

Yes / Electrospinning is a versatile technique that has gained popularity for various biomedical applications in recent years. Electrospinning is being used for fabricating nanofibers for various biomedical and dental applications such as tooth regeneration, wound healing and prevention of dental caries. Electrospun materials have the benefits of unique properties for instance, high surface area to volume ratio, enhanced cellular interactions, protein absorption to facilitate binding sites for cell receptors. Extensive research has been conducted to explore the potential of electrospun nanofibers for repair and regeneration of various dental and oral tissues including dental pulp, dentin, periodontal tissues, oral mucosa and skeletal tissues. However, there are a few limitations of electrospinning hindering the progress of these materials to practical or clinical applications. In terms of biomaterials aspects, the better understanding of controlled fabrication, properties and functioning of electrospun materials is required to overcome the limitations. More in vivo studies are definitely required to evaluate the biocompatibility of electrospun scaffolds. Furthermore, mechanical properties of such scaffolds should be enhanced so that they resist mechanical stresses during tissue regeneration applications. The objective of this article is to review the current progress of electrospun nanofibers for biomedical and dental applications. In addition, various aspects of electrospun materials in relation to potential dental applications have been discussed.

The application of membranes in liquid and gas separation is attractive because of their energy efficiency. Synthesis of membranes with well-defined nanostructure is necessary to achieve highly permeability and selectivity for separation processes. Recently, carbon nanomaterials such as graphene oxide nanoplatelets (GONPs) and carbon nanodots (CNDs) have emerged as an interesting class of nanomaterials due to their unique properties and tailorable functionalities. Incorporation of these nanomaterials in the membranes has been shown to improve membrane selectivity, mechanical robustness, and chemical stability. This dissertation elaborates on developing CNDs or GONPs embedded thin film composite (TFC) membranes using layer-by-layer (LbL) synthesis technique. Regarding the water desalination applications, GONPs were used to enhance the TFC membranes’ selectivity, chlorine resistant properties, and surface hydrophilicity. Incorporation of GONPs in the polyamide layer via LbL method resulted in an increase of surface hydrophilicity and salt rejection properties. Upon exposure to chlorine, GONPs embedded membranes retained salt rejection performance better than the pristine membranes (without GONPs). The LbL assembly was used to synthesize CNDs based TFC membranes for organic solvent nanofiltration (OSN) applications. Using the LbL framework, amineunctionalized CNDs were covalently crosslinked with trimesoyl chloride monomer to obtain nanoscale membranes. The synthesized membranes manifested high selectivity (up to 90%) when tested for dye molecules such as brilliant blue and disperse red in methanol. As the CNDs synthesized here are fluorescent under UV light, the resultant film is also fluorescent. This property can be harnessed for diagnostic purposes, such as tracking mechanical failure and fouling of the membranes. Based on the results, it can be concluded that the incorporation of carbon nanomaterials in the polymeric membranes has enhanced the hydrophilicity, mechanical stability, and chlorine resistant properties of the membranes. Overall, the LbL platform can be considered as a modular method in embedding nanoparticles in TFC membranes.

No description available.

No description available.