<p>Aluminum is present throughout the environment and in many industrial processes and consumer goods. While very useful in everyday lives, it has no inherent biological functions in humans. High quantities in the human body can be toxic, resulting a range of skeletal, neurological, and hematopoietic effects. A system has been developed to analyze aluminum using the neutron activation analysis (NAA) technique in vivo. NAA was performed with a transportable neutron generator as a neutron source and a high purity germanium (HPGe) detector for spectroscopy. The neutron generator and HPGe detector were completely modelled in MCNP6. Measurements were carried out to evaluate the accuracy of the MCNP6 simulations and to determine the detection capabilities of the system for aluminum. Simulations were also conducted to determine the acceptability of radiation dose to subjects undergoing analysis. The detection limit for the system was evaluated using skeletal bone as a long-term aluminum biomarker. The detection limit was determined to be 3.41 x 10¹ μg of Al per g of dry bone for an irradiation time of six minutes. This detection level is below a point at which physiological effects have been observed in humans. A lower detection level was demonstrated to be possible with a longer irradiation time. The radiation absorbed dose was determined to be 7.30 mGy for an irradiation of six minutes. The system can therefore be utilized as a potential screening and monitoring tool for high skeletal burdens of aluminum that may lead to physiological effects.</p> <p>The simulation and calculation techniques developed herein were applied to a set of human subject data that were acquired for a purpose other than evaluating aluminum. The human subject data included both bone Al from NAA and fingernail Al from mass spectrometry measurements. No significant aluminum signals were observed when assessing the in vivo NAA spectra data. Through simulation and calculation, it was demonstrated that the NAA experimental parameters resulted in an elevated detection limit for aluminum that is above Al skeletal loads observed in healthy individuals. The elevated detection limit prevented the in vivo detection of aluminum in a healthy population, thus confirming the NAA results. </p>

<p>Excess sodium (Na) intake is directly related to hypertension and an increased risk of developing many chronic diseases, but there is currently no method to directly quantify Na retained in the body. Because of this, the locations of Na storage and its exchange mechanisms are not well known. This information is critical for understanding the impact of increased Na intake in modern diets. In order to non-invasively quantify Na in bone and soft tissue, a compact deuterium-deuterium (DD) neutron generator-based <i>in vivo</i> neutron activation analysis (IVNAA) system was developed. MCNP was used to design a custom irradiation assembly to maximize Na activation in hand bone while minimizing dose. In order to test the system, live pigs were used. Two 100% efficient high purity germanium (HPGe) detectors collected Na-24 counts over 24 hours post irradiation. From the pig studies, a two-compartment model of exchange was developed to quantify Na in bone and in soft tissue. The right legs of four live pigs, two on a low Na diet and two on a high Na diet, both for 14 days, were irradiated inside the customized irradiation cave for 10 minutes (45 mSv dose to the leg) and then measured with the HPGe detectors. The spectra were analyzed to obtain the net Na counts at different time points. Analysis shows exponential decrease of Na in the leg during the first one hour of measurement, while the change was minimal at the second hour, and the counts were stabilized at the second and third 2 hour measurements, taken 7 and 21 hours post irradiation. Bone Na and soft tissue Na concentrations were calculated using calibration lines created with bone and soft tissue equivalent Na phantoms as well as the parameters obtained from the two-compartment model. The results show that the difference in bone and soft tissue Na between the pigs on high vs low Na diets was significant. With these results, we conclude that DD neutron generator-based IVNAA can be used to accurately quantify Na in bone and soft tissue <i>in vivo </i>and the system is a potential valuable tool for nutrition studies.</p>

<p> Though Neutron Activation Analysis is one of the most sensitive multielement analysis methods, Compton interference in complex sample matrices usually presents a problem when choosing irradiation and decay times for analysis. While various scientists have attempted to solve the problem, the approaches taken to date have the drawbacks of either requiring standard spectra of the sample components or not giving the optimum times automatically and simultaneously. The purpose of this thesis was to find a method to automatically and simultaneously obtain the optimum times for Instrumental Neutron Activation Analysis using the Modified Simplex Method to evaluate the best figure of merit calculated from an advance predicted spectrum of the sample.</p> / Thesis / Master of Science (MSc)

<p> This work was the first study at the beam port # 4 at the McMaster Nuclear Reactor, involving prompt gamma in vivo neutron activation analysis. The project consisted of experimental and computational parts. The computational part was done using MCNP program, which simulates the neutron and photon transport in the medium. The first thing assessed was the energy dependent neutron fluence rate in the collimated neutron beam, at the site. This was done in order to figure out the complete source (sdef) card for further MCNP calculations. This was combined experimental and computational work. For the experimental part, various activation foils were used and computational part was done by using MCNP programming.</p> <p> The second part of the project involved experimental prompt gamma in vivo activation analysis using 7 different phantoms, ranging from 30 mL to 2 L. Three different elements were observed. The prompt gamma in vivo detection of cadmium was the preliminary calibration study and the experiments were done with all seven phantoms. The calibration lines and MDL were assessed for all phantoms, with concentration ranging from 0 to 50 ppm. The prompt gamma in vivo detection of boron and mercury was done using 30 mL phantoms. Calibration lines and MDL for both elements were assessed as well.</p> <p> MCNP experimental simulations for 30 mL water phantoms were done and they were in close agreement with the experimental results. Furthermore, the MCNP gamma and neutron dose survey in the cave was done.</p> <p> The results obtained showed that there are numerous open possibilities for improvement in terms of in vivo prompt gamma analysis at the site. It predominantly includes the improvements in prompt gamma detection techniques and MCNP source definition. Furthermore, it was found that MCNP programming is the ideal tool for assessment and control of the experimental results in this case. It means that in the future research, the MCNP modeling will be the essential part of the in vivo prompt gamma activation analysis at this beam port.</p> / Thesis / Master of Science (MSc)

Non-invasive techniques to measure bone fluorine levels in vivo are few and not well studied. These techniques would prove useful for longitudinal studies of fluorine accumulation and treatment optimization for patients with poor bone health. Two measurement techniques were analyzed and improvements to each technique attempted with bone samples and bone-mimicking phantoms. The first method analyzed was neutron activation analysis (NAA), a technique previously studied in our laboratory. A previous detector setup consisting of nine sodium iodide detectors was re-tested and a new detector setup consisting of two high-purity germanium detectors was also tested. The detection limit of the sodium iodide setup was found to be higher than previously reported by a factor of 4, and the new high-purity germanium detector setup was found to result in a higher detection limit by a factor of 5 compared to the sodium iodide setup. The second method analyzed was nuclear magnetic resonance (NMR). Magic angle spinning was performed on a human bone sample, and a novel probe was constructed for future in vivo measurements. MAS NMR measurement of the human bone sample showed it to have an appropriate chemical shift and shape consistent with previous research on substances similar to bone. The constructed probe successfully resonated at the appropriate frequency, however there were potential contamination problems which prevented a measurable fluorine signal from being obtained. Both the NAA and NMR techniques may be optimized further, though with the results obtained, NAA remains the more sensitive technique for measuring bone fluorine in vivo. / Thesis / Master of Science (MSc) / Fluorine is an element which accumulates in bones and teeth. High levels of fluorine have been shown to be unhealthy, causing both dental and skeletal fluorosis. Low levels of fluorine have been shown to reduce dental cavities, however, their effect on bone health is not well understood. Currently, fluorine can be measured in bone samples from either biopsies or cadavers. Having a non-invasive way to measure fluorine concentrations in living humans without the need for surgery would be invaluable. These measurements could be used to optimize treatment for osteoporosis patients or to determine if emergency measures are necessary in cases of high accidental doses to members of the public. Additionally, long-term studies examining fluorine metabolism and bone health could be performed on population groups of interest. For these reasons, two different non-invasive methods for determining fluorine content in bone were analyzed and enhancements to each measurement technique attempted.

Nesse trabalho foi desenvolvido um sistema de aquisição &gamma;&gamma; que possibilita realizar medidas de Análise por Ativação Neutrônica Instrumental por espectroscopia gama unidimensional e em coincidência simultaneamente para os elementos As, Co, Cs, La, Sc, Se e Sm. Para tal foram realizadas medidas preliminares em sistemas de aquisição &gamma;&gamma; baseados em instrumentação analógica e digital a fim de se verificar a eficiência da técnica a partir de medições de padrões sintéticos e análises de materiais de referência certificados. Essas medidas também auxiliaram na escolha do tipo de instrumentação mais apropriada para o desenvolvimento do sistema de aquisição no Laboratório de Física Nuclear Aplicada (LFNA) do IPEN. O sistema montado no LFNA é composto de uma placa digitalizadora da marca CAEN modelo v1724 e dois detectores de germânio hiperpuro. A aquisição dos dados é controlada pelo software MC2Analyzer, que fornece dados brutos de energia e tempo dos pulsos registrados. Foram desenvolvidos dois programas de redução de dados que selecionam os eventos em coincidência a partir dos espectros unidimensionais: o DPP que prepara os dados para serem analisados em programas de análise de espectros bidimensionais; e o AnalisaCaen que trata os dados para sejam analisados em programas de análises de espectros unidimensionais. Foram realizadas análises de materiais de referência certificados biológicos e geológicos, e também padrões sintéticos utilizando-se as técnicas de Análise por Ativação Neutrônica convencional e em coincidência. Os resultados permitiram verificar a confiabilidade dos valores das concentrações dos elementos As, Co, Cs, La, Sc, Se e Sm obtidos com o sistema de coincidência desenvolvido. Os resultados obtidos por ambas as técnicas, Análise por Ativação Neutrônica Convencional e Análise por Ativação Neutrônica em Coincidência, foram comparados e valiados em termos de precisão e exatidão pelo critério de Enscore. Em alguns casos, os resultados de concentração obtidos por meio das medidas de coincidência forneceram melhores do que os resultados obtidos pela espectroscopia gama convencional. / In this study was the developed a &gamma;&gamma; acquisition system that make possible to perform Neutron Activation Analysis by single gamma spectroscopy and coincidence &gamma;&gamma; spectroscospy simultaneously for the elements As, Co, Cs, La, Sc, Se e Sm. In order to achieve this main goal preliminary measurements in &gamma;&gamma; acquisition systems with analogical and digital instrumentation were performed to check the efficiency of technique through measurements of synthetic standard and certified reference material. These measurements also helped to choose the most suitable instrumentation for the development of the acquisition system in the Applied Nuclear Physics Laboratory (LFNA) located at IPEN. The developed system is composed by a CAEN v1724 digitizer board and two hyperpure Germanium detectors. The data acquisition is controled by MC2Analyzer software, which provide raw data of energy and time information of the recorded pulses.Two softwares for data reduction that allow the set the coincident events from single spectra were developed: DPP which prepare the data to be analyzed with softwares for bidimensional espectra.; and AnalisaCaen which handle the data to be analyzed with softwares for single spectra. Determination of the concentration for some elements in certified reference materials and sytnhetic standards were performed applying the conventional and coincidence Neutron Activation Analysis methods. Accuracy and precision of the results obtained by Instrumental Neutron Activation Analysis and Coincidence Instrumental Neutron Activation Analysis were performed by Enscore criteria. The results obtained with this system allowed to check the reliability on the determination for the elements As, Co, Cs, La, Sc, Se and Sm. In some cases the concentration results obtained with coincidence measurements were better than the results from single spectroscopy.

Tillandsia usneoides L. é uma bromélia que vive em árvores ou em outros substratos inertes, absorvendo água e nutrientes diretamente do ambiente, sem apresentar raízes. Devido às suas características morfológicas e fisiológicas, esta espécie acumula os poluentes presentes na atmosfera. No presente trabalho, Tillandsia usneoides foi usada como biomonitor de poluição atmosférica por metais em São Paulo, Brasil, que é a maior cidade da América do Sul, com uma população de cerca de 18 milhões de habitantes e uma forte atividade industrial. A área urbana é poluída por emissões industriais mas, de acordo com a Companhia de Tecnologia de Saneamento Ambiental do Estado de São Paulo (CETESB), a agência governamental de controle de qualidade do ar, emissões regulares de cerca de 7,8 milhões de veículos motores são a principal fonte de poluição do ar. As amostras de Tillandsia foram coletadas em um local considerado não poluído e foram expostas por períodos de dois meses em 10 locais da cidade com diferentes níveis de poluição, e em um local de controle. Após a exposição, os metais foram analisados na planta por análise por ativação com nêutrons e por ICP-MS (Pb, Cd, Co, Cu, Ni, Sb e V). Os resultados obtidos mostraram uma concentração notável de Co e Ni nas plantas expostas em uma área industrial, onde existe uma indústria de processamento de metal, que produz cerca de 600 ton/ano de Co e 16.000 ton/ano de Ni. Cobre e crômio se apresentaram igualmente distribuídos em regiões industriais e em locais próximos a avenidas com tráfego intenso, sugerindo que estes elementos podem ser associados tanto a fontes veiculares como industriais. O acúmulo de Cd verificado nas plantas expostas em áreas industriais indica as atividades intrópicas como a principal fonte desse elemento. Não foram identificadas fontes evidentes para o Pb, uma vez que este elemento se apresentou igualmente espalhado por todos os locais de monitoramento. Elementos ligados ao tráfego, como Zn, Ba and Sb apresentaram altas concentrações em plantas expostas em locais situados próximos a avenidas com tráfego pesado (carros, ônibus e caminhões) e podem ser associados a fontes veiculares. Para Zn, os maiores teores foram relacionados a zonas industriais, e este elemento pode ser também associado à presença de fontes de emissão antrópicas. Os elementos terras raras, Fe e Rb, provavelmente têm as partículas de solo como principal fonte. / Tillandsia usneoides L. is an epiphytic bromeliad that lives on trees or other kinds of inert substrates, absorbing water and nutrients directly from the environment without roots. Due to its morphological and physiological characteristics, this species accumulates the pollutants present in the atmosphere. In the present work, Tillandsia usneoides was used as a biomonitor of metal atmospheric pollution in São Paulo, Brazil, which is the biggest city in South America with a population of 18 million inhabitants and a strong industrial activity. The urban area is polluted by industrial emissions but, according to the Environmental Protection Agency of the State of São Paulo (CETESB), the governmental agency of air quality control, regularly occurring emissions from about 7.8 million motor vehicles provide the principal source of air pollution. The Tillandsia samples were collected from an unpolluted area and were exposed bimonthly in 10 sites of the city with different pollution levels and in a control site. After exposure, trace metals were analyzed in the plant by instrumental neutron activation analysis and ICP-MS (Pb, Cd, Co, Cu, Ni, Sb e V). The results of the investigation showed a notable concentration of Co and Ni in the plants exposed in an industrial area where there is a metal processing plant, which produces about 600 tons/year of Co and 16,000 tons/year of Ni. Copper and chromium were equally distributed in industrial regions and in sites near heavy traffic avenues, suggesting that these elements can be associated to both vehicular and industrial sources. A high accumulation of Cd in the plant exposed in industrial areas indicates industrial activities as the main source of this element. For Pb, no evident sources could be identified so far as it was spread evenly along the monitoring sites. Traffic-related elements such as Zn, Ba and Sb presented high concentrations in plants exposed in sites near to heavy traffic avenues (cars, buses and trucks) and may be associated to vehicular sources. For Zn, the highest contents were related to industrial zones and this element can be associated to the presence of anthropogenic emission sources. The rare earth elements, Fe and Rb, probably have soil particles as main source.

Nenhuma / Há uma grande procura da população brasileira por medicamentos manipulados em farmácias de manipulação, que têm papel social incontestável por possibilitar a individualização do medicamento e obtenção de medicamentos não disponíveis industrialmente. Na última década houve rápido crescimento no número de farmácias magistrais no Brasil. A Vigilância Sanitária tem envidado esforços para fiscalização e monitoramento eficaz desses estabelecimentos, realizando publicação e revisão de legislação sanitária, dentre outras ações. Todavia, casos de desvios de qualidade de medicamentos manipulados foram registrados ao longo dos anos e ainda são realidade, com sérias conseqüências à saúde da população e levando a óbito em alguns casos. Ainda, estudos realizados como os de Leal e colaboradores (2006 e 2008) evidenciaram impurezas químicas em matérias-primas e medicamentos manipulados e industrializados. Diante disso, restam dúvidas quanto à qualidade dos medicamentos manipulados ofertados à população e quanto ao rigor das exigências da legislação sanitária vigente e sua adequação ao amadurecimento do setor magistral. O objetivo deste estudo foi avaliar a qualidade de medicamentos manipulados em farmácias magistrais de Belo Horizonte após a publicação da RDC 67/2007, por meio de análises farmacopéicas e de aspecto e rotulagem. Para tanto, foram adquiridos medicamentos de amplo consumo omeprazol e cloridrato de fluoxetina em cinco estabelecimentos de Belo Horizonte, amostrados por amostragem estratificada considerando localização geográfica e número de farmácias por região, seguida por amostragem aleatória. Ainda, foram tratados os resultados das análises do monitoramento da qualidade de manipulados realizado pela Vigilância Sanitária de Minas Gerais em parceria com a Fundação Ezequiel Dias, no ano de 2011. Por fim, foram realizadas análise por ativação neutrônica dos medicamentos manipulados visando detecção e quantificação de impurezas elementares. Os resultados das análises executadas confirmam a preocupação sobre a qualidade dos medicamentos manipulados, uma vez que houve somente 7% de satisfatoriedade nos produtos analisados, e a necessidade de ações rápidas e eficientes do sistema público de saúde para possibilitar a garantia da qualidade dos medicamentos manipulados. / There is a great demand of the population for compounded drugs from pharmacies, which have undeniable social role by allowing the individualization of medication and obtaining drugs not available industrially. In the last decade there has been rapid growth in the number of pharmacies in Brazil. The Sanitary Surveillance is striving for effective monitoring and supervision of these establishments, performing publishing and reviewing health legislation, among other actions. Therefore, there is doubt about the quality of compounded drugs offered to the population and the rigor of the requirements of current health law and its suitability for the maturation of the industry masterful. Still, studies such as Leal and collaborators (2006 and 2008) showed chemical impurities in raw materials and drugs handled and processed. The aim of this study was to evaluate the quality of compounded drugs in pharmacies in Belo Horizonte after publication of RDC 67/2007, through pharmacopoeial analysis, aspect and labeling. Therefore, were purchased drugs from widespread consumption - omeprazole, fluoxetine - in five establishments of Belo Horizonte, sampled by stratified sampling considering geographical location and number of pharmacies per region, followed by random sampling. Also dealt with the results of the analysis of the quality monitoring conducted by Sanitary Surveillance of Minas Gerais in partnership with Fundação Ezequiel Dias, in the year 2011, in compounded medicines. Finally, we performed neutron activation analysis of compounded drugs targeting detection and quantification of elemental impurities.The results of the analysis performed confirms the concern about the quality and safety of compounded medicines, since there was only 7% of satisfactoriness, and the need for fast and efficient actions of public health system to allow quality assurance of compounded drugs.

Tillandsia usneoides L. é uma bromélia que vive em árvores ou em outros substratos inertes, absorvendo água e nutrientes diretamente do ambiente, sem apresentar raízes. Devido às suas características morfológicas e fisiológicas, esta espécie acumula os poluentes presentes na atmosfera. No presente trabalho, Tillandsia usneoides foi usada como biomonitor de poluição atmosférica por metais em São Paulo, Brasil, que é a maior cidade da América do Sul, com uma população de cerca de 18 milhões de habitantes e uma forte atividade industrial. A área urbana é poluída por emissões industriais mas, de acordo com a Companhia de Tecnologia de Saneamento Ambiental do Estado de São Paulo (CETESB), a agência governamental de controle de qualidade do ar, emissões regulares de cerca de 7,8 milhões de veículos motores são a principal fonte de poluição do ar. As amostras de Tillandsia foram coletadas em um local considerado não poluído e foram expostas por períodos de dois meses em 10 locais da cidade com diferentes níveis de poluição, e em um local de controle. Após a exposição, os metais foram analisados na planta por análise por ativação com nêutrons e por ICP-MS (Pb, Cd, Co, Cu, Ni, Sb e V). Os resultados obtidos mostraram uma concentração notável de Co e Ni nas plantas expostas em uma área industrial, onde existe uma indústria de processamento de metal, que produz cerca de 600 ton/ano de Co e 16.000 ton/ano de Ni. Cobre e crômio se apresentaram igualmente distribuídos em regiões industriais e em locais próximos a avenidas com tráfego intenso, sugerindo que estes elementos podem ser associados tanto a fontes veiculares como industriais. O acúmulo de Cd verificado nas plantas expostas em áreas industriais indica as atividades intrópicas como a principal fonte desse elemento. Não foram identificadas fontes evidentes para o Pb, uma vez que este elemento se apresentou igualmente espalhado por todos os locais de monitoramento. Elementos ligados ao tráfego, como Zn, Ba and Sb apresentaram altas concentrações em plantas expostas em locais situados próximos a avenidas com tráfego pesado (carros, ônibus e caminhões) e podem ser associados a fontes veiculares. Para Zn, os maiores teores foram relacionados a zonas industriais, e este elemento pode ser também associado à presença de fontes de emissão antrópicas. Os elementos terras raras, Fe e Rb, provavelmente têm as partículas de solo como principal fonte. / Tillandsia usneoides L. is an epiphytic bromeliad that lives on trees or other kinds of inert substrates, absorbing water and nutrients directly from the environment without roots. Due to its morphological and physiological characteristics, this species accumulates the pollutants present in the atmosphere. In the present work, Tillandsia usneoides was used as a biomonitor of metal atmospheric pollution in São Paulo, Brazil, which is the biggest city in South America with a population of 18 million inhabitants and a strong industrial activity. The urban area is polluted by industrial emissions but, according to the Environmental Protection Agency of the State of São Paulo (CETESB), the governmental agency of air quality control, regularly occurring emissions from about 7.8 million motor vehicles provide the principal source of air pollution. The Tillandsia samples were collected from an unpolluted area and were exposed bimonthly in 10 sites of the city with different pollution levels and in a control site. After exposure, trace metals were analyzed in the plant by instrumental neutron activation analysis and ICP-MS (Pb, Cd, Co, Cu, Ni, Sb e V). The results of the investigation showed a notable concentration of Co and Ni in the plants exposed in an industrial area where there is a metal processing plant, which produces about 600 tons/year of Co and 16,000 tons/year of Ni. Copper and chromium were equally distributed in industrial regions and in sites near heavy traffic avenues, suggesting that these elements can be associated to both vehicular and industrial sources. A high accumulation of Cd in the plant exposed in industrial areas indicates industrial activities as the main source of this element. For Pb, no evident sources could be identified so far as it was spread evenly along the monitoring sites. Traffic-related elements such as Zn, Ba and Sb presented high concentrations in plants exposed in sites near to heavy traffic avenues (cars, buses and trucks) and may be associated to vehicular sources. For Zn, the highest contents were related to industrial zones and this element can be associated to the presence of anthropogenic emission sources. The rare earth elements, Fe and Rb, probably have soil particles as main source.

O Laboratório de Análise por Ativação com Nêutrons (LAN-IPEN) vem analisando amostras geológicas, tais como rochas, solos e sedimentos, há vários anos, empregando o método de análise por ativação com nêutrons comparativa, visando estudos geoquímicos e ambientais. Este trabalho apresenta os resultados obtidos na implementação do método de padronização k0-INAA no LANIPEN, para a análise de amostras geológicas, utilizando o programa k0-IAEA, fornecido pela Agência Internacional de Energia Atômica (IAEA). A razão do fluxo de nêutrons térmico-epitérmico f e o fator &alpha; da distribuição de fluxo de nêutrons epitérmicos do reator IEA-R1 do IPEN foram determinados na estação pneumática de irradiação, e em uma posição de irradiação selecionada, para irradiações curtas e longas, respectivamente. Para obter esses fatores, foi utilizado o chamado método bare triple-monitor com 197Au-96Zr-94Zr. Para avaliar a exatidão e precisão do método, foram analisados os materiais geológicos de referência basalto JB-1 (GSJ) e BE-N (IWG-GIT), andesito AGV-1 (USGS), granito GS-N (ANRT), SOIL-7 (IAEA) e sedimento Buffalo River Sediment (NIST BRS-8704), que representam diferentes matrizes geológicas. Os resultados obtidos para até 30 elementos concordaram com os valores recomendados, com erros relativos (bias) menores que 10%, exceto no caso do Zn no AGV-1 (11,4%) e Mg no GS-N (13,4%). Os critérios estatísticos z-score, zeta-score e U-score foram aplicados para avaliação dos resultados. Pelo critério do z-score, os resultados obtidos puderam ser considerados satisfatórios (z<2), com exceção dos resultados obtidos para Mg no GS-N e no JB-1, e para Yb no Soil-7. O critério estatístico zeta-score se mostrou o mais restritivo, obtendo-se resultados questionáveis (2 < zeta < 3) para Mg no BE-N, Mn no GS-N e Yb no Soil-7, e resultados insatisfatórios (zeta>3) para Mn no BE-N, Mg, Ce e La no GS-N, Mg no JB-1, e Th e Eu no Buffalo River Sediment. Os valores de U-score mostraram que todos os resultados, com exceção do valor para Mg no JB-1, estão dentro de um intervalo de confiança de 95% (se for considerado 1,96 o valor limite para o Uteste para um nível de probabilidade de 95%). Estes resultados indicam excelentes possibilidades para o uso deste método paramétrico no LAN-IPEN para a análise de amostras geológicas em estudos geoquímicos e ambientais. / The Neutron Activation Analysis Laboratory (LAN-IPEN) has been analysing geological samples such as rocks, soils and sediments, for many years with the INAA comparative method, for geochemical and environmental research. This study presents the results obtained in the implementation of the k0-standardization method at LANIPEN, for geological sample analysis, by using the program k0- IAEA, provided by the International Atomic Energy Agency (IAEA). The thermal to epithermal flux ratio f and the shape factor &alpha; of the epithermal flux distribution of the IPEN IEA-R1 nuclear reactor were determined for the pneumatic irradiation facility and one selected irradiation position, for short and long irradiations, respectively. To obtain these factors, the bare triple-monitor method with 197Au- 96Zr-94Zr was used. In order to validate the methodology, the geological reference materials basalts JB-1 (GSJ) and BE-N (IWG-GIT), andesite AGV-1 (USGS), granite GS-N (ANRT), SOIL-7 (IAEA) and sediment Buffalo River Sediment (NISTBRS-8704), which represent different geological matrices, were analysed. The concentration results obtained agreed with assigned values, with bias less than 10% except for Zn in AGV-1 (11.4%) and Mg in GS-N (13.4%). Three different scores were used to evaluate the results: z-score, zeta-score and Uscore. The z-score showed that the results can be considered satisfactory (z<2), except for Mg in GS-N and JB-1, and for Yb in Soil-7. Zeta-score was the most restrictive criterion, indicating questionable results (2 < zeta < 3) for Mg in BE-N, Mn in GS-N and Yb in Soil-7, and unsatisfactory results (zeta>3) for Mn in BE-N, Mg, Ce and La in GS-N, Mg in JB-1, and Th and Eu in Buffalo River Sediment. The U-score test showed that all results, except Mg in JB-1, were within 95% confidence interval. These results indicate excellent possibilities of using this parametric method at the LAN-IPEN for geological samples analysis in geochemical and environmental studies.