Biocatalytic membranes (BMs) have promising applications in a diversity of fields including food, pharmaceutical and water treatment industries. Of particular relevance, Alcalase is a commercially important protease that has been applied for the production of peptides from the hydrolysis of proteins. In this study, two different approaches were applied for the modification of electrospun polyacrylonitrile nanofibrous membranes (EPNMs) for Alcalase immobilization. The first approach is alkali modification of EPNMs followed by EDC/NHS coupling for covalent bonding with Alcalase, whereas the other is based on polydopamine coating with or without glutaraldehyde grafting as a covalent linker. Immobilized Alcalase on these prepared BMs were studied and compared with free enzymes. It was found that the stabilities of Alcalase on BMs created using both approaches were improved, which enabled their reuse of 10 cycles with significant retention of enzymatic activity. A continuous reactor housing BMs were tested for hydrolysis of both model substrate, azo-casein and soybean meal protein (SMP). It was found that decreasing flux could improve the extent of hydrolysis and that a single-layer reactor can hydrolyze about 50% of the substrate to peptides with the molecular weight of 10 kDa or less. Hydrolysis of SMPs was demonstrated in a continuous five-layer BM reactor and both BMs showed excellent hydrolysis capacity. This study provides the groundwork for the development of high-efficiency BM for continuous and cost-effective protein hydrolysis for the production of value-added peptides.

No / In recent years, for neurodegenerative diseases therapy, research has focused on the stem cells therapy. Due to promising findings in stem cell therapy, there are various sources of stem cells for transplantation in human. The aim of this study was to evaluate sciatic nerve regeneration in the rat after nerve transaction followed by human endometrial stem cells (hEnSCs) treatment into poly (e-caprolactone)/collagen/nanobioglass (PCL/collagen/NBG) nanofibrous conduits. After treatment of animals, the performance in motor and sensory tests, showed significant improvement in rats treated with hEnSCs as an autograft. H&E images provided from cross-sectional and, longitudinal-sections of the harvested regenerative nerve as well as immunohistochemistry results indicated that regenerative nerve fibres had been formed and accompanied with new blood vessels in the conduit cell group. Due to the advantage of high surface area for cell attachment, it is reported that this electrospun nerve conduit could find more application in cell therapy for nerve regeneration in future, to further improve the functional regeneration outcome, especially for longer nerve defect restoration. In conclusion, our results suggest that the PCL/collagen/NBG nanofibrous conduit filled with hEnSCs is a suitable strategy to improve nerve regeneration after a nerve transaction in rat. / Iran National Science Foundation (INSF) grant number 95849510

Nanofibrous separators use in lithium-ion batteries brings many advantages. In contrast to contemporary used commercial separators, nanofibrous ones exhibit higher temperature resistance,ionic conductivity and higher electrolyte uptake. Better ionic conductivity is ensured by porous structure and large specific surface. Fibers creates channels for the ionic species motion. Amorphous texture of nanofibers allows quick lithium ionic species motion within the polymeric matrix of separator. Furthermore, these separators exhibit higher volume of uptaken electrolyte. Further advantage of electrospinned nanofibrous separators are both high porosity and chemical stability.

Background: The main focus of the dissertation is the use of nanofibrous biodegradable materials for the healing support of intestinal anastomoses in colorectal surgery. The altered healing process of intestinal anastomosis leads to several types of local complications. Anastomotic leakage is one of the most feared ones. Severe anastomotic leakage causes peritonitis, sepsis and is a life-threatening condition. Reoperation is necessary in many cases, bringing the need for intensive care, and hospital stays prolongation. Extensive peritoneal adhesions are another source of postoperative complications. These adhesions are a frequent cause of bowel obstruction and abdominal discomfort and are the most common reason for readmission after colorectal procedures. Nanofibrous biodegradable materials showed positive effects on the healing process in various locations. We aimed to develop and perfect a biodegradable patch for both prevention of anastomotic leakage and the formation of extensive peritoneal adhesions. Methods: We conducted 3 subsequential experiments on porcine models. In Experiment A, we managed to develop polycaprolactone and polylactic acid- polycaprolactone copolymer nanofibrous patches and applied them on anastomoses on the small porcine intestine. The animals were observed for 3 weeks....

The growing incidences of orthopedic problems globally have created a huge demand for strong bioactive materials for bone tissue engineering. Over the years, studies have shown chemical, physical, and mechanical properties of biomaterials influence the cellular interactions at the material-tissue interface, which subsequently controls biological response to materials. Strong biomaterials with surface properties that actively direct cellular response hold the key for engineering the next generation orthopedic implants. With its unique properties graphene can be used to reinforce poly (ε-caprolactone) (PCL) to prepare strong and bioactive polymer nanocomposites for bone tissue regeneration. The thesis entitled ―Engineering bioactive and multifunctional graphene polymer composites for bone tissue regeneration” systematically studies the effect of different chemically functionalized and metal-graphene hybrid nanoparticles in PCL composites for bone tissue engineering. The thesis comprises of seven chapters. Chapter 1 is an outline review on the impact of graphene and graphene derived particles to prepare supporting substrates for tissue regeneration and the associated cell response to multifunctional graphene substrate. This chapter discusses how cells interact with different graphene based particles and the interplay between cells performance and multifunctional properties of graphene based substrates. Chapter 2 describes the role, if any, of the functionalization of graphene on mechanical properties, stem cell response and bacterial biofilm formation. PCL composites of graphene oxide (GO), reduced GO (RGO) and amine-functionalized GO (AGO) were prepared at different filler contents (1%, 3% and 5%). Although the addition of the nanoparticles to PCL markedly increased the storage modulus, this increase was higher for GO and AGO than with RGO. In vitro cell studies revealed that the AGO and GO particles significantly increased human mesenchymal stem cell (hMSC) proliferation. AGO was most effective in augmenting stem cell osteogenesis leading to mineralization. Bacterial studies revealed that interaction with functionalized GO induced bacterial cell death due to membrane damage which was further accentuated by amine groups in AGO. The synergistic effect of oxygen containing functional groups and amine groups on AGO-reinforced composites renders the optimal combination of improved modulus, favorable stem cell response and biofilm inhibition desired for orthopaedic applications. In Chapter 3, toward preparing strong multi-biofunctional materials, poly(ethylenimine) (PEI) conjugated graphene oxide (GO_PEI) was synthesized using poly(acrylic acid) (PAA) as spacer and incorporated in PCL at different fractions. GO_PEI significantly promoted proliferation and formation of focal adhesions in hMSCs on PCL. GO_PEI was highly potent in inducing stem cell osteogenesis leading to 90% increase in alkaline phosphatase activity and mineralization over neat PCL with 5% filler content and was 50% better than GO. Remarkably, 5% GO_PEI was as potent as soluble osteo-inductive factors. Increased adsorption of osteogenic factors due to the amine and oxygen containing functional groups on GO_PEI augment stem cell differentiation. GO_PEI was also highly efficient in imparting bactericidal activity with 85% reduction in counts of E. coli colonies compared to neat PCL at 5% filler content and was more than twice as efficient as GO. This may be attributed to the synergistic effect of the sharp edges of the particles along with the presence of the different chemical moieties. Thus, in contrast to using labile biomolecules, GO_PEI based polymer composites can be utilized to prepare bioactive resorbable biomaterials for fabricating orthopedic devices for fracture fixation and tissue engineering. Chapter 4 describes the preparation of hybrid nanoparticles of graphene sheets decorated with strontium metallic nanoparticles and its advantages in bone tissue engineering. Strontium-decorated reduced graphene oxide (RGO_Sr) nanoparticles were synthesized by facile reduction of graphene oxide and strontium nitrate. X-ray diffraction, transmission electron microscopy, and atomic force microscopy revealed that the hybrid particles were composed of RGO sheets decorated with 200 – 300 nm metallic strontium particles. Thermal gravimetric analysis further confirmed the composition of the hybrid particles as 22 wt% of strontium. Macroporous tissue scaffolds were prepared incorporating RGO_Sr particles in PCL. The PCL/RGO_Sr scaffolds were found to elute strontium ions in aqueous medium. Osteoblast proliferation and differentiation was significantly higher in the PCL scaffolds containing the RGO_Sr particles in contrast to neat PCL and PCL/RGO scaffolds. The increased biological activity can be attributed to the release of strontium ions from the hybrid nanoparticles. This study demonstrates that composites prepared using hybrid nanoparticles that elute strontium ions can be used to prepare scaffolds with osteoinductive property. These findings have important implications for designing the next generation of biomaterials for use in tissue regeneration. Chapter 5 discusses the use of hybrid graphene-silver particles (RGO_Ag) to reinforce PCL and compared with PCL/RGO and PCL/Ag composites containing RGO and silver nanoparticles (AgNPs), respectively. RGO_Ag hybrid particles were well dispersed in the PCL matrix unlike the RGO and AgNPs due to enhanced exfoliation. RGO_Ag led to 77 % increase in the modulus of PCL and provided a conductive network for electron transfer. Electrical conductivity increased four orders of magnitude from 10-11 S/cm to 10-7 S/cm at 5 wt % filler that greatly exceeded the improvements with the use of RGO and AgNP in PCL. RGO_Ag particles reinforced in PCL showed sustained release of silver ions from the PCL matrix unlike the burst release from PCL/Ag. PCL/RGO_Ag and PCL/RGO composites were non-toxic to hMSCs and supported osteogenic differentiation unlike the PCL/Ag composites which were highly toxic at ≥3% filler content. The PCL/RGO_Ag composites exhibited good antibacterial effect due to a combination of silver ion release from the AgNPs and the mechanical rupture induced by the RGO in the hybrid nanoparticles. Thus, the synergistic effect of Ag and RGO in the PCL matrix uniquely yielded a multifunctional material for use in implantable biomedical devices and tissue engineering. Chapter 6 presents investigation of potential differences in the biological response to graphene in polymer composites in the form of 2D substrates and 3D scaffolds. Results showed that osteoblast response to graphene in polymer nanocomposites is markedly altered between 2D substrates and 3D scaffold due to the roughness induced by the sharp edges of graphene at the surface in 3D but not in 2D. Osteoblast organized into aggregates in 3D scaffolds in contrast to more well spread and randomly distributed cells on 2D discs due to the macro-porous architecture of the scaffolds. Increased cell-cell contact and altered cellular morphology led to significantly higher mineralization in 3D scaffolds compared to 2D. This study demonstrates that the cellular response to nanoparticles in composites can change markedly by varying the processing route. Chapter 7 summarizes the important results and future directions of the work. This chapter provides general conclusions arising from this study, and makes suggestions for future work designed to provide a greater understanding of the in vivo response in terms of bio-distribution of the released functionalized graphene from the scaffold or substrate must be assessed with special attention on their accumulation or excretion.

Le glioblastome (GBM) est la forme de cancer du cerveau la plus courante et la plus meurtrière. Sa nature diffusive entraine une impossibilité d’élimination complète par chirurgie. Une récidive de la tumeur chez ≥ 90% des patients peut être provoqué par des cellules GBM résiduelles se trouvant près du bord de la cavité de résection. Un implant pouvant libérer de manière durable la protéine SDF-1α, qui se lie aux récepteur CXCR4 à la surface des cellules GBM, peut être utile pour induire le recrutement des cellules GBM résiduelles, permettre leur élimination sélective et finalement réduire la récurrence de la tumeur. Dans ce travail, le SDF-1α a été initialement encapsulé dans des nanoparticules à base d'acide poly-lactique-co-glycolique (PLGA). Une efficacité d'encapsulation élevée (76%) a pu être obtenue en utilisant un processus simple de séparation de phase. Les nanoparticules chargées de SDF-1α ont ensuite été incorporées dans un scaffold à base de chitosan par électrofilage pour obtenir des implants nanofibreux imitant la structure de la matrice extracellulaire du cerveau. Une étude de libération in vitro a révélé que l'implant pouvait fournir une libération prolongée de SDF-1α jusqu'à 35 jours, utile pour établir un gradient de concentration de SDF-1α dans le cerveau et induire une attraction des cellules GBM. Une étude de biocompatibilité in vivo à 7 jours a révélé des signes d'inflammation locale sans aucun signe visible de détérioration clinique chez les sujets animaux. Une étude à 100 jours visant à confirmer l'innocuité in vivo des implants avant de passer aux études d'efficacité dans un modèle de résection GBM approprié est actuellement en cours. / Glioblastoma (GBM) is the most common and lethal form of brain cancer. The diffusive nature of GBM means the neoplastic tissue can not be removed completely by surgery. Often, residual GBM cells can be found close to the border of the resection cavity and these cells can multiply to cause tumor recurrence in ≥90% of GBM patients. An implant that can sustainably release chemoattractant molecules called stromal cell-derived factor-1α (SDF-1α), which bind selectively to CXCR4 receptors on the surface of GBM cells, may be useful for inducing chemotaxis and recruitment of the residual GBM cells. This may then give access to selective killing of the cells and ultimately reduce tumor recurrence. In this work, SDF-1α was initially encapsulated into poly-lactic-coglycolicacid (PLGA)-based nanoparticles. A high encapsulation efficiency (76%) could be achieved using a simple phase separation process. The SDF-1α-loaded nanoparticles were then incorporated into a chitosan-based scaffold by electrospinning to obtain nanofibrous implants that mimic the brain extracellular matrix structure. In vitro release study revealed that the implant could provide sustainedSDF-1α release for 5 weeks. The gradual SDF-1αrelease will be useful for establishing SDF-1α concentration gradients in the brain, which is critical for the chemotaxis of GBM cells. A 7-day in vivo biocompatibility study revealed evidence of inflammation at the implantation site without any visible signs of clinical deterioration in the animal subjects. A long-term study (100 days) aiming to confirm the in vivo safety of the implants before proceeding to efficacy studies in a suitable GBM resection model is currently underway.