Spelling suggestions: "subject:"beural response telemetry"" "subject:"aneural response telemetry""
1 |
The application of machine intelligence to cochlear implant fitting and the analysis of the auditory nerve responseBotros, Andrew, Computer Science & Engineering, Faculty of Engineering, UNSW January 2010 (has links)
Effective cochlear implant fitting (or programming) is essential for providing good hearing outcomes, yet it is a subjective and error-prone task. The initial objective of this research was to automate the procedure using the auditory nerve electrically evoked compound action potential (the ECAP) and machine intelligence. The Nucleus?? cochlear implant measures the ECAP via its Neural Response Telemetry (NRT) system. AutoNRT, a commercial intelligent system that measures ECAP thresholds with the Nucleus Freedom implant, was firstly developed in this research. AutoNRT uses decision tree expert systems that automatically recognise ECAPs. The algorithm approaches threshold from lower stimulus levels, ensuring recipient safety during postoperative measurements. Clinical studies have demonstrated success on approximately 95% of electrodes, measured with the same efficacy as a human expert. NRT features other than ECAP threshold, such as the ECAP recovery function, could not be measured with similar success rates, precluding further automation and loudness prediction from data mining results. Despite this outcome, a better application of the ECAP threshold profile towards fitting was established. Since C-level profiles (the contour of maximum acceptable stimulus levels across the implant array) were observed to be flatter than T-level profiles (the contour of minimum audibility), a flattening of the ECAP threshold profile was adopted when applied as a fitting profile at higher stimulus levels. Clinical benefits of this profile scaling technique were demonstrated in a 42 subject study. Data mining results also provided an insight into the ECAP recovery function and refractoriness. It is argued that the ECAP recovery function is heavily influenced by the size of the recruited neural population, with evidence gathered from a computational model of the cat auditory nerve and NRT measurements with 21 human subjects. Slower ECAP recovery, at equal loudness, is a consequence of greater neural recruitment leading to lower mean spike probabilities. This view can explain the counterintuitive association between slower ECAP recovery and greater temporal responsiveness to increasing stimulation rate. This thesis presents the first attempt at achieving completely automated cochlear implant fitting via machine intelligence; a future generation implant, capable of high fidelity auditory system measurements, may realise the ultimate objective.
|
2 |
Monitoring longitudinal behaviour of impedance and Neural Response Telemetry measurements in a group of young cochlear implant usersCass, Nicolize 06 July 2011 (has links)
Electrophysiological measures such as impedance telemetry and Neural Response Telemetry (NRT™) were developed by Cochlear™ in 1992 as clinical tools allowing the objective setting of stimulus levels for cochlear implant users. Extensive research proved the usefulness of NRT™’s as an aid in the programming process of audible and comfortable stimulus levels for children younger than six years. The Nucleus® Freedom™, launched in 2005, introduced new developments in cochlear implantation. Approval from the FDA for this system was obtained in March 2005 and for the first time included children from age 12 months with profound hearing loss. The Joint Committee on Infant Hearing suggested that children be diagnosed and that treatment commenced by the age of six months. The new features of the Nucleus Freedom™ give clinicians the necessary tools to treat this challenging population. An urgent need exists to ascertain the stability and accuracy of the new features introduced by this system, especially the Auto-NRT™ software, to validate its use within the paediatric population. A longitudinal descriptive design was utilized implementing quantitative research methods to critically describe the behaviour of impedance telemetry and NRT™’s in a group of young cochlear implant users. The quantitative method included the application of the Custom Sound™ software and the Auto-NRT™ feature for this group at implantation, device activation, and then at determined follow-up visits. Nine young children between nine months and five years and eleven months were used as participants during the twelve months of research. Impedance telemetry was described in terms of the mean Common Ground (CG) and Monopolar 1+2 (MP1+2) values calculated from measurement data collected on the basal, medial, and apical electrodes of the electrode array. The electrodes identified for statistical procedures for both measurement types were E3, E6, E8, E11, E13, E16, E19 and E21. Friedman’s ANOVA was used as a statistical measure to determine the level of significance in changes among the measurement modes and conditions. The Wilcoxon signed-rank test was indicated in the presence of significant changes identified by Friedman’s ANOVA to calculate the level of significance in a pair-wise comparison. Results indicate that impedance telemetry remained consistent over the electrode array and over time in both measurement modes. A slight increase in mean values was observed during the first three months, followed by a gradual decrease at the six months interval. These changes were statistically nonsignificant. No specific trends were evident in impedance telemetry over time. NRT™-measurements remained consistent across the electrode array over time. Significant changes were present between the intra-operative to device activation measurement intervals. This trend is also described in studies of adult cochlear implant users. NRT™-measurements were stable during the first year postimplantation within the paediatric population. A comparison between the mean impedance telemetry and NRT™’s disclosed an inverse trend during the first six months post-implantation. Most changes were non-significant, indicating that these measures can be used effectively in the new semi-automated fitting software. The implementation of these measurements can lead to streamlined and accountable service delivery to young cochlear implant users. AFRIKAANS : In 1992 is elektrofisiologiese metings soos impedanstelemetrie en Neurale Respons Telemetrie (NRT™) deur Cochlear™ ontwikkel as kliniese hulpmiddels om objektiewe instelling van stimulasievlakke vir kogleêre gebruikers moontlik te maak. Navorsing het bewys dat NRT™’s ‘n effektiewe hulpmiddel is tydens programmering van hoorbare en gemaklike stimulasievlakke by kinders jonger as ses jaar. Die Nucleus® Freedom™ met nuwe ontwikkelings ten opsigte van kogleêre inplantings is in 2005 bekendgestel. Die FDA het in Maart 2005 hierdie sisteem goedgekeur vir gebruik by kinders selfs so jonk as 12 maande met uitermatige gehoorverlies. Die Joint Committee on Infant Hearing het voorgestel dat diagnose en aanvang van rehabilitasie teen ses maande ouderdom moet plaasvind. Die nuwe funksies van die Nucleus® Freedom™ stel oudioloë in staat om hierdie uitdagende bevolking te hanteer. ‘n Dringende behoefte bestaan om te bepaal of hierdie sagteware, veral Auto-NRT™ wat saam met hierdie sisteem bekendgestel is, oor voldoende akkuraatheid en stabiliteit beskik om in die hantering van die pediatriese bevolking te gebruik. ‘n Longitudinale, beskrywende ontwerp, wat kwantitatiewe metodes implementeer, is aangewend om die beweging van impedanstelemetrie en NRT™’s by ‘n groep jong gebruikers van kogleêre inplantings krities te beskryf. Dit het die gebruik van die Custom Sound™ sagteware en die ingeslote Auto- NRT™ funksie behels. Dit is tydens inplantering, by aktivering van die toestel, en bepaalde opvolgsessies uitgevoer. Nege jong kinders tussen die ouderdomme van nege maande en vyf jaar en 11 maande is tydens die 12 maande navorsingsperiode as proefpersone benut. Die impedansmetings is beskryf in terme van die Common Ground (CG) en Monopolar 1+2 (MP1+2) stimulasiemodaliteite. Data is verkry vanaf geselekteerde elektrodes op die basale, mediale en apikale gedeeltes van die elektrode. Vir statistiese ontledings van impedans en NRT™ is hierdie elektrodes geselekteer: E3, E6, E8, E11, E13 E16, E19 en E21. As statistiese ontledingsmetode, is Friedman se ANOVA toegepas om die vlakke van beduidenheid van beweging tussen die verskillende toetsmodaliteite en -omstandighede te bepaal. Die Wilcoxon signed-rank toets is aangedui in die teenwoordigheid van statisties beduidende veranderinge. Die doel van hierdie toets was om die vlak van beduidenheid paarsgewys te verifieer. Resultate dui op konstante impedansmetings oor die elektrode asook oor tyd in beide toetsmodaliteite. ‘n Geringe, statisties nie-beduidende, verhoging in gemiddelde waardes is waargeneem tydens die eerste drie maande na inplantering, waarna die waardes weer geleidelik afgeneem het tot en met die ses maande opvolginterval. Geen spesifieke neiging kon vir impedanstelemetrie bepaal word nie. NRT™-metings het konstant gebly oor die elektrode en met tyd. Statisties beduidende veranderinge is gemeet tussen die intra-operatiewe en aktiveringsintervalle. Hierdie neiging is ook beskryf in studies van volwasse gebruikers van kogleêre inplantings. NRT™-metings, binne die pediatriese populasie, het dus stabiel gebly oor die 12 maande periode post-inplantering. ‘n Vergelyking tussen die gemiddelde impedans- en NRT™-metings het ‘n inverse neiging geïdentifiseer gedurende die eerste ses maande na inplantering. Veranderinge was oor die algemeen statisties nie-beduidend, wat daarop dui dat hierdie metings effektief gebruik kan word. Die implementering van hierdie metings kan meer doeltreffende dienslewering aan die jong gebruikers van kogleêre inplantings tot gevolg hê. / Dissertation (MCommunication Pathology)--University of Pretoria, 2010. / Speech-Language Pathology and Audiology / unrestricted
|
3 |
Digital Signal Processing Architecture Design for Closed-Loop Electrical Nerve Stimulation SystemsJui-wei Tsai (9356939) 14 September 2020 (has links)
<div>Electrical nerve stimulation (ENS) is an emerging therapy for many neurological disorders. Compared with conventional one-way stimulations, closed-loop ENS approaches increase the stimulation efficacy and minimize patient's discomfort by constantly adjusting the stimulation parameters according to the feedback biomarkers from patients. Wireless neurostimulation devices capable of both stimulation and telemetry of recorded physiological signals are welcome for closed-loop ENS systems to improve the quality and reduce the costs of treatments, and real-time digital signal processing (DSP) engines processing and extracting features from recorded signals can reduce the data transmission rate and the resulting power consumption of wireless devices. Electrically-evoked compound action potential (ECAP) is an objective measure of nerve activity and has been used as the feedback biomarker in closed-loop ENS systems including neural response telemetry (NRT) systems and a newly proposed autonomous nerve control (ANC) platform. It's desirable to design a DSP engine for real-time processing of ECAP in closed-loop ENS systems. </div><div><br></div><div>This thesis focuses on developing the DSP architecture for real-time processing of ECAP, including stimulus artifact rejection (SAR), denoising, and extraction of nerve fiber responses as biomedical features, and its VLSI implementation for optimal hardware costs. The first part presents the DSP architecture for real-time SAR and denoising of ECAP in NRT systems. A bidirectional-filtered coherent averaging (BFCA) method is proposed, which enables the configurable linear-phase filter to be realized hardware efficiently for distortion-free filtering of ECAPs and can be easily combined with the alternating-polarity (AP) stimulation method for SAR. Design techniques including folded-IIR filter and division-free averaging are incorporated to reduce the computation cost. The second part presents the fiber-response extraction engine (FREE), a dedicated DSP engine for nerve activation control in the ANC platform. FREE employs the DSP architecture of the BFCA method combined with the AP stimulation, and the architecture of computationally efficient peak detection and classification algorithms for fiber response extraction from ECAP. FREE is mapped onto a custom-made and battery-powered wearable wireless device incorporating a low-power FPGA, a Bluetooth transceiver, a stimulation and recording analog front-end and a power-management unit. In comparison with previous software-based signal processing, FREE not only reduces the data rate of wireless devices but also improves the precision of fiber response classification in noisy environments, which contributes to the construction of high-accuracy nerve activation profile in the ANC platform. An application-specific integrated circuit (ASIC) version of FREE is implemented in 180-nm CMOS technology, with total chip area and core power consumption of 19.98 mm<sup>2</sup> and 1.95 mW, respectively. </div><div><br></div>
|
Page generated in 0.0945 seconds