Subject of this master´s thesis is project planning and management of construction of Apartment building in Brno. This thesis involves engineering report, block plan and block plan drawing, time schedulings, project of site equipment, design of machine formation, technological regulation of eartworks and nailig wall, test plan of eartworks and nailig wall, work safety for rough structure and budget of rough structure.

The subject of this diploma thesis is a newly built mixed-use building in Brno. It is a four-storey building without cellar. The building is located on a corner plot in an urban part of Brno - Židenice. In the 1st floor there are three business units. On the other floors are a total of 11 apartments. One apartment is located in the courtyard. It is designed for people with limited mobility. The vertical structures are of the ceramic blocks Porotherm. Ceiling structures and staircases are cast-in-place reinforced concrete. The building is insulated with contact insulation system ETICS. The roof is warm flat. The project was processed by computer software AutoCAD 15.

The aim of this thesis is to design a mountain chalet. Chalet is intended for recreation and accommodation for 23 persons and is designed to gently sloping land in the village of Horní Bečva. The building has two floors without a basement. The main entrance to the building is from the southern side entrance for staff is on the eastern side and the other side entrance to the building is from the north. Part of the building for accommodation is situated on the 2nd floor. Perimeter and interior bearing walls are designed from brick blocks Porotherm in 2.NP then the inner walls of plasterboard. The construction of a roof over the main part of the building is made up of wooden roof purlin system, a roof over your wellness zone is flat vegetation, and the roof over the vestibule is flat with classical music. The main part of the building is covered with a gable roof with a slope of 35 degrees inclinations flat roof over the vestibule wellness zone and 3%.

This diploma thesis solves a project Sports and wellness center. This object is located on land number 1241/549, 1241/571in cadastral office Velké Bílovice. The plot is located on a street Podivínská in Velké Bílovice. Velké Bílovice are smaller town in South Moravia. The building has two floors ane one underground floor. The building is constructed of brick systém SUPERTHERM HELUZ. The perimeter wall is constructed from ceramic blocks HELUZ STI 49. Ceilings are monolithic reinforced concrete. The building offers three squash courts, a fitness center, snack bar, sauna with massage. The entire building is expected movement of persons with reduced mobility. The roof is flat and angled wooden beam. Entrance doors and window are Aluminium

Subject of this final thesis is to develop project documents of a new mixed-use building in Havířov. The building has three floors and basement car park. On the first floor there is a café and shops. On the second and third floor there are office spaces. Structural sytem of building is cast-in-place concrete frame. Exterior building envelope is made of sand-lime bricks with ventilated facade with thermal insulation of mineral wool insulation. The roof of the building is designed as a non-walkable warm flat roof.

The subject of this diploma thesis is the processing of design documentation for realization of the new-build multipurpose building in Opava. The building is designed on the grounds of a former dairy in the Krnovská street where the demolition of obsolete buildings passed off recently. Now are these areas designed to build up again. Designed object will function as a multipurpose building with the operation of a restaurant on the 1st floor, office spaces on the 2nd floor and dwelling units on the 3rd floor. Part of the first floor is a mass garage primarily intended for residents of dwelling units with a total of 9 parking places. It is designed eight dwelling units in total of which six are one-room flats and two are four-room flats. Plan shape of the building is rectangular. The londbearing structure of the building is a reinforced concrete prefabricated precast concrete frame founded on cast-in-place concreted pads. Infill walls are clay brick. The building is roofed with warm flat roof. Dominant features of the building are large glass areas in all floors, metal ventilated facade and loggias of dwelling units. The drawings are processed in AutoCAD programme.

The subject of the thesis is the development of project documentation for the construction of a nursing home in Zlín for clients who are unable to take care of themselves and need full day care. The nursing home is designed to stand alone in sloping terrain. The slope is used and the entrance to the first above-ground level is at the level of the modified terrain from Broučkova street and the entrance to the basement is also from the modified terrain. The building is designed with one underground floor and five upper floors. The circumferential and internal supporting masonry is designed from ceramic cut cinder blocks on the upper floors. Lost shuttering is used on the perimeter and vertical support structures, in the basement. Elevator shafts, ceiling structures and staircases are designed from monolithic reinforced concrete structures. The roof is an extensive green roof. The object is based on reinforced concrete strips. The object is insulated with the ETICS.

The subject of the diploma thesis is to elaborate the project documentation of a newbuilt multifunctional building in Považská Bystrica. The multifunkcional building is designed as a three-storey without basemen. In the first ground floor there are dental and gynecological surgeries with facilites, a cafe and director's office. In the second there are office spaces with facilities for rent. On the level of the third floor there are two-rooms flats and one four-room flat, while there are also storage spaces for each of the flats. The building of the multifunctional house is based on reinforced concrete foundations. The vertical construction system consist of reinforced concrete perimeter walls and perimeter reinforced concrete columns in combination with an internal load-bearing walls of the reinforcing core of the building. The partition walls are designed as a plasterboard walls. The horizontal load-bearing structures are made of reinforced concrete prestressed panels. The roofing of the building is designed as a flat one-layer roof. The roof of the terrace consist of an extensive vegetation flat one-layer roof. The roofing of the awning at the main entrance to the building is design as a reinforced concrete monolithic console with one-layer flat roof a skylight. The building is insulated with the external thermal insulation composite system (ETICS). The façade of the communication core of the building is made of brick cladding. The rest of the façade is made of a thin layer white plaster.

The subject of the diploma thesis is the processing of project documentation for the construction of wellness pension. This building is designed in a medium sloping terrain on the edge part of the Rajhrad city. The building has 3 floors and garage in the basement. Object is divided into 2 parts, the first part consists a restaurant and 2 floors for temporary accommodation in 14 rooms for 45 customers. The second part consists wellness for accommodated and also for other outside customers. The roof is designed single skin with vegetation area (extensive). The project includes a solution of paved areas and access to the underground garage, fencing, water connection, sewage connection, rainwater conection including a retention tank and overflow into the rainwater sewerage. The construction system of the building is based on reinforced concrete footings connected to foundation strips in the places of the cladding, follow up reinforced concrete columns. The ceiling structures, including hidden girders and stairs, are made of monolithic, reinforced concrete. Vertical load-bearing structures are designed from POROTHERM ceramic blocks. The vertical structures of the basement are designed from lost formwork. The building's ventilation system is divided into four parts, the first part is for wellness, the second part is for restaurant and pension, third part is for kitchen, last part is for fire protected escape route.

The subject of this diploma thesis is civil technical project of a new building of the hotel Aztec in Ostrožská Nová Ves. The building was designed as a 6-storey building and will be used for accommodation and recreation. Thesis contains engineering report, a detailed time schedule for the main building object, project of construction site, technological notes and inspection and test plans for particular steps of construction, proposal of suitable machines and mechanisms required for construction and wider relationships of transport routes to construction site. It also includes protection of health and safety at work taking into account environmental protection.