The final thesis is focused on design of functional unit od Kindergarten in Křenovice (district Vyškov). The object is subdivided to 3 functional parts. The middle part is designed as a two-storey, remaining two parts are single-storey. Whole object is without cellart. This object is formed from two separate class for fifteen children each and the middle part is design for technical facilities . For every class are two teachers and in total one a head teacher. For the preparation food a cleaningup there are three employees. In the object is one office of speech therapy with barrier free access. The roofing of object is design as a warm vegetation flats roofs. The object is design as a masonry system of sand-lime block with contact thermal insulation system.

The subject of this diploma thesis is a proposal of the veterinary clinic in Pardubice. The object consists of 3 rectangles, where zverimex is connected to the veterinary clinic. Objects of the zverimex are veterinary clinic are designed as barrier-free. Object SO01 is partly solved as a two-storey, non-cellar. In the first part of the clinic there is a shop of zverimex with office and stock of rectangular shape. In the second part there is a reception for a veterinary clinic with a distinct entrance from where access is to of individual surgeries. In the inner part, there are offices of doctors, such as operating theaters, preparation rooms, CT, RTG, sono / endo / laparo, a laboratory connected with the infectious ward, a rehabilitation center and individual pet boxes. On the 2nd floor there are wardrobes and social facilities for the staff of the clinic with offices and day room, from where it is possible to enter the outdoor terrace. Hygienic facilities for visitors to the clinic are located in the entrance hall. For zverimex staff is designed at the back of the shop, the staff of the clinic is part of the closets in the 1st floor and 2nd floor. The construction system is a wall with a flat vegetation roof passing into the terraces on the terraces above the 1st NP, the roof above the entrance and over the 2nd NP, zverimex with the roof unobstructed. Ceiling structures are designed as pre-tensioned SPIROLL 320 mm ceiling panels. The exterior of the building of the clinic, which extends only to the 1st floor, is lined with red brick tiles and in the part of the building above which is the 2nd floor, the outside wall is lined with brick-gray cladding.

The diploma thesis elaborates on the design of a new building of freestanding retirement home in the town of Litomyšl. The design of the retirement home is in the form of project documentation for the construction. The new building includes a partial basement and three floors. The main purpose is to build a building for housing with flats for seniors and to provide health care to seniors living here and from the surrounding area. On the 1st floor, there is an administrative part, a doctor's office with the possibility of rehabilitation and a dining room with facilities for food preparation, which is imported into the home. The dining room serves both the guests and the public. The remaining part of the first floor consists of social, administrative and utility rooms. On the 2nd and 3rd floors, there are individual apartments for clients with a common room for visits and spending their free time. On the 1st floor, there is a maintenance center, boiler room, server room, furniture store, and estate depository. Basement walls are monolithic, made of reinforced concrete. The construction system of the above-ground floors is wall-mounted, bidirectional and made of ground brick blocks. The ceilings and staircases are monolithic, made of reinforced concrete. External walls are insulated with a contact thermal insulation systems. The building is mainly based on footings or foot anchors. The retirement home is located on the edge of the town near the Litomyšl Hospital. The land is suitable for construction, as it is located in the area for the construction of civil buildings.

This diploma thesis presents a project documentation for construction of a community centre with a restaurant. Its construction site is located on the outskirts of town Jaroměřice nad Rokytnou, Poděbradova street. The building is composed from three parts, which are connected to each other. The first part houses the restaurant with its facilities. This part is a single floor structure covered by a flat green roof. Its façade is formed by white boards composed into an asymmetrical pattern. The second part serves as a backstage area where all the necessary facilities are located. This second part of the building is as the first part a single floor structure covered by a flat green roof. Its façade is formed by façade timber boards. The main entrance is located in the middle part, which is the third part the building. It has two floors and it houses an auditorium, a bar and amenities. Its façade is formed by trapezial boards. The construction system is formed by load bearing walls and by prestressed concreted floor panels or in some parts by cast-in-place reinforced concrete slabs. The building has strip foundations. Its interior walls are built from sand-limestone bricks with acoustic properties. The perimeter walls are covered with ventilated façade with mineral wool thermal insulation. The heating of the community centre is powered by gas boiler connected to single-vent chimney with ventilation shaft.

Diploma thesis is about design and making of execution project for office city building which is located in Nový Bydžov. The building is located in the late brownfield area of Dufek´s wood manufacture, which is on the south part of Nový Bydžov. The building has four above ground floors and one below ground floor. The building shape is rectangular of dimensions 53,02 x 17,62 m. On the south, west and east is the façade from height of second floor slightly cantilevered. On the east part the edge of cantilevered façade duplicate slopping edge of the bottom land and it creates wonderful but economical shape. The height of the building from the ground is 14,5 m. The shape of roof is flat, covered with the mPVC foil and gravel mound. Façade which covering the first ground floor is made of polystyrene with thin layer of plaster which creates building plinth. Top cantilevered façade is made of ceramic tiles of dimensions 1200 x 600 mm which are suspended behind the air layer. The ceramic tiles are light brown color. In the bottom part are glazed areas of rectangular and square shapes to create the open feeling in the ground floor. In the rear part is designed coffee bar with nice outside wooden terrace. Windows in the top cantilevered part of the façade are the circular shape and extend the architectural impression of the building. All windows are in the same color of dark blue. The steel parts of the building are also dark blue color. In the bellow ground floor are designed underground parking lot with the maximum capacity 29 cars and technical equipment. In the first floor above ground are designed reception, big lecture hall, exhibition hall, coffee bar with terrace and toilets. In the second floor above the ground are offices, computer room and HVAC equipment. In the third above floor are offices, conference hall, and IT equipment. In the fourth floor above the ground are also offices, maintenance room and storage of furniture.

The objective of this diploma thesis is the processing of the construction technology design as a part of the preparation and implementation of the fire station in Jaroměř. It is a new construction of the main building, which is supplemented by other objects and engineering buildings. The thesis deals with complex design of the implementation of the construction and then focuses in more detail on the installation of the supporting frame structure, which consists of reinforced concrete prefabricated elements. The whole project also includes a technical report on the construction technology project, a study of the implementation of the main technological stages of the main building, solutions for transport routes for construction supply, construction site design, machine set design, technological regulations with assembly diagrams, control and test plan, time plans and balance of resource needs, itemized budget and occupational safety and health plan. The diploma thesis is supplemented by a specialized part dealing with the reconstruction of the area road with a bituminous cover and the implementation of other paved areas within the area of the fire station.

The content of the master thesis is processing of project documentation for The Mountain Guesthouse in Trojanovice, first done as a pilot project and then as a feasibility study. It concerns a two-storey detached building with a parking stand, with a basement. This house is designed from the Porotherm building system, ceiling construction - ceramic ceiling panels, saddle roofs with dormer windows. The work also comprises thermal technical assessment chosen constructions, fire protection report, protocol - the energy label of the building envelope, dispositional design and further calculations.

This Master´s thesis is focused on block of flats project documentation. The documentation is worked for building construction. Emphasis is placed on structural, space, fire safety, thermal and acoustic requirements. Masonry building is secluded and has four floors, without cellared, with a gabled roof. The building is designed with eight flats and one of these flats is designed for persons with reduced mobility.

The content of this thesis is the construction project of technological of residential building U Vojanky in Prag. The new residential building is comprised of two parts that are interconnected by connecting neck. Author deals with the most important technology stages of construction that are processed in following parts of this thesis.

The thesis concerns the construction of an apartment building in Velke Mezirici. The project describes construction and engineering solutions of the building itself. It consists of the technical report, the financial proposal, the construction site drawings, the building schedule, the supervisory and testing procedures, technological standards (thermal insulation and roof assembly), construction machinery, BOZP, fire safety regulations and construction maintenance.