The project contains structural design of new polyfunctional apartment house in Humpolec. The building has four floors and a basement. In the first floor is designed to store food. There are apartmens in the second to fourth floors. The basement serves as the technical background and storage space for users apartments. The structural system consists of the skeletal system with a combination of brick. The building is covered with three flat roof decks at different height levels where on eis growing, on is walkable and one is not walkable.

The thesis contains a barrier-free apartment building with a rehabilitation center in the administrative area Brno - Židenice. There are two separate buildings. The building block of flats (SO01) has two above, one underground floor and consists of a total of 11 residential units, garages and also has available for residents of social service. The building is constructed of structural system of ceramic blocks (Porotherm), except basement, which has walls and columns of reinforced concrete. The ceilings are from reinforced concrete and the roof is designed as a flat surcharge. The second object (SO02) is a single-storey and is also built from the system ceramic block with reinforced concrete ceilings and flat roof vegetation. The whole complex is insulated contact system. Both buildings are designed as a barrier-free, which is an ideal place to stay for the disabled, who can easily use the services of a rehabilitation center.

The subject of this thesis is to simulate the energy balance of the two new buildings, classic brick buildings and light wood construction. On the basis of these simulations are compared effects of various parameters of insulation including panels for building openings on heat loss, energy efficiency cooling and solar gains. Energy simulations were performed with TRNSYS 16_1.

The topic of this diploma thesis is design of new Mountain hotel in the cadastral area of city Michlova Huť, part of city Vimperk. The hotel is designed as a monolithic reinforced concrete wall structures based strip foundations. The ground plan is designed as a rectangular object, to which is attached a smaller rectangle providing the main entrance to the building. Load-bearing structure of pitched roof is designed by a reinforced concrete structure. The roof is solved as a double-layer with air gap for ventilation. The total capacity of hotel are approximately 70 guest and 15 workers.

This thesis describes the design of an apartment building in Roznov pod Radhostem. It is a detached building on a large and gently sloping land. The building block of flats has five above and consists of a total of 25 residential units. The flat on first floor is designed as a barrier-free. On first floor are situated two mass garages (for 18 cars). The building is designed of structural systém of ceramic blocks, except first and second floor, which has walls and columns of reinforced concrete. The ceilings are from reinforced concrete and the roof is designed as a flat surcharge. The work includes project documentation for the construction and specialization.

The subject of this thesis is newly built multifunctional building that will be built in Brno. The part of Brno is called Sadová. The building will have five floors above ground and one underground floor. The underground floors will be used for car parking. The first floor will be located several shops. It will be hairdresser, florist's, supermarket and a cafeteria. Between the second and the fifth floor will be dwelling units. There will be 14 dwelling units with an area > 100 m2 and 8 dwelling units with an area

The thesis deals with the preparation of plans for a new Center of Culture and Education complex located in the town of Rychnov nad Kněžnou. The complex being designed is composed of two interconnected parts. Library, educational center, café and technical facilities are located in the main part of the building. The main part has three floors and a partial basement. The structure consists of reinforced concrete frame with ceilings formed by point-supported slab. The building is covered with warm flat roof. The second part of the building is a one-floor multipurpose hall with facilities. Load-bearing structure of the roof consists of glue laminated girders supported by columns. The facade is partly designed as a ventilated cladding with cement-bonded particle board, partly as a contact thermal insulation system.

The objective of the bachelor thesis is the design of the hotel. The building of hotel is free standing. On the first floor there is a restaurant with the kitchen, , including kitchen traffic, a reception office and sanitary facilities for the visitors and the staff. The second and third floor are used for the accommodation of guests. Two rooms are designed as barrier- free. Bearing walls are made of Porotherm brickwork. Ceiling construction is designed from the ceiling panels Spiroll. Roof of the building is designed two types of roofs. Three floors part of the building is covered by warm flat roof and the one floor part of the building is covered by green roof. The graphical part of documentation has been processed in the Autodesk Autocad software. Thermal assesment has been processed in Svoboda software.

The theme of this thesis is the construction of residential building with a café in Brno on the street Foustkova. The building has one underground floor and four aboveground floors. On the first floor is a cafe area and two separate entrances to apartment blocks with flats. Second, third and fourth floors are designed as flats of different categories. The underground floor there are a garage, utility room and cellar storage boxes. Construction system the building's skeleton. The core made of masonry Porotherm. Ceiling structures and staircases are monolithic reinforced concrete. The building is covered flat and terraced roof.

The final thesis deals with a new building of the mixed-used building in Zruč nad Sázavou. The object has five floors, it is basementless with a flat roof. A loadbearing structure is made of skeleton - reinforced concrete monolithic column and reinforced concrete monolithic slabs. Filling masonry is made of ceramic tiles. The object has ventilated facade, it is insulated by mineral wool. Most parts of the object are used for living purposes, the rest of rooms are used as an shopping area – bookstore, drugstore. Stores have their own cleaning rooms and stocks. In area used for living purporses, there is basement cells and boiler room. In sum there are twelve residential units and four of these units are maissonett apartments.