Cette recherche s’inscrit dans le contexte de la conception d’une filière originale comprenant la phytoextraction du nickel par la plante hyperaccumulatrice Alyssum murale, endémique des sols de serpentine d’Albanie et de sa valorisation de ce nickel, l’objectif étant d’arriver à un produit à haute valeur ajoutée. Les sols de serpentine peuvent être considérés comme une ressource secondaire. Ils contiennent des concentrations élevées en nickel mais à des teneurs insuffisantes pour être exploités par l’industrie minière. La plante Alyssum murale peut extraire et concentrer le nickel dans ses tissus. Le nickel présent dans la biomasse a pu être solubilisé quasiment totalement à l’acide sulfurique, en réacteur fermé puis à contre-courant en trois étapes. Cette lixiviation a produit une solution contenant du nickel lié à des molécules organiques ainsi que d’autres métaux et composés organiques. Les procédés de raffinage directs comme la précipitation sélective ou l’électroplaquage n’ont pas permis d’isoler le nickel. Deux voies ont été explorées : (i) l’extraction par un solvant organique sélectif du nickel (Cyanex 272) suivie d’une contre extraction par une solution aqueuse et électrodéposition et (ii) la cristallisation d’un sel double à partir du lixiviat préparé après incinération de la biomasse. La première voie a permis d’obtenir le nickel métal sous forme de cathode, la seconde a conduit au sel double sulfate de nickel et d’ammonium. Les produits ont été caractérisés par différentes techniques. Une étude technico-économique a montré le fort potentiel économique de la production de sel double / This research has been done in the context of the design of an original method aiming at obtaining high added value products of nickel, combining phytoextraction and valorization. Phytoextraction is conducted with the hyperaccumulating plant Alyssum murale, endemic species of serpentine soils in Albania. Serpentine soils can be considered as secondary resources: they contain high concentrations of nickel, which are not high enough for conventional mining techniques. The plant Alyssum murale can extract and concentrate nickel in its tissues. Nickel present in the biomass could be almost totally solubilized in batch reactor and with a 3 step countercurrent process. This leaching produced a solution containing nickel bound to organic molecules and other metals and organic compounds as well. Direct separation processes (e.g. selective precipitation and electrowinning) did not enable us to obtain nickel. Two methods have been investigated: (i) extraction by an organic nickel –selective solvent (Cyanex 272), extraction by an aqueous solution and electrowinning and (ii) crystallization of a double salt, nickel ammonium sulfate, from a leaching solution obtained from biomass ashes. Nickel products were characterized by different techniques. A technico-economical study showed the high commercial potential of the double salt production.

Transition metal phosphide materials have found themselves at the forefront of research revolving around energy applications. Due to the vast range of properties possessed by marginally different phase compositions, binary and ternary metal phosphides are utilized as catalysts, semi-conductors and magnetocaloric materials along with many others. These attractive properties, which are highly phase dependent, call for a versatile and cost effective synthesis route for various phosphide materials without sacrificing properties important at the nanoscale such as particle size and morphology. The primary focus outlined in the work of this dissertation pertains to a versatile wet chemical synthesis capable of producing multiple phases of binary and ternary phosphides containing one or more of the transition metals cobalt, iron and nickel. These metals were of particular interest due to the proven catalytic activity of iron, cobalt or nickel binary phases and the lack of research conducted on the corresponding ternary phases. The challenge presented by wet chemical synthesis methods is the ability to separate different crystal phases of metal phosphide in a short amount of time, with less toxic and lower cost chemicals, and a simple synthetic process with the ability to produce products on a larger scale. Oleylamine was used as a solvent, capping agent and reducing agent along with trioctylphosphine or triphenylphosphine as a phosphorus source. Many binary phosphide phases were synthesized with the same method and purity of phase was controlled primarily with temperature or phosphorus to metal ratio (P:M). At lower temperatures (290-320°C) or lower P:M (4:1) Ni3P,Ni2P, Fe2P, and Co2P were synthesized while higher temperatures (330-360°C) or higher P:M (22:1) produced Ni5P4, Ni12P5, FeP and CoP. Ternary phosphides FeCoP and CoNiP were also successfully synthesized at temperatures of 300-330°C with small excesses of phosphorus (2-5 molar excess). Preliminary catalytic studies for the evolution of hydrogen gas were conducted to test the efficacy of phosphide materials produced via the simplistic oleylamine method. Ni2P was found to have the highest activity toward hydrogen evolution with an overpotential of 320 mV which is comparable and in some cases better than other unsupported phosphide catalysts of the same phase. The ability to control phase composition using a simple, cost effective wet chemical synthesis is promising for the future production of active metal phosphide materials.

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

L’objectif principal de la thèse concerne la mise au point d'une méthode de piégeage et d'analyse quantitative de métaux cancérogènes ou susceptibles de l'être dans les urines, en permettant de s'affranchir du transport de l'échantillon sous forme liquide. Parmi les éléments traces métalliques (ETM), nous nous sommes intéressés plus particulièrement aux espèces du cobalt et du nickel. L'approche présentée repose sur l'extraction solide/liquide des ions métalliques par complexation sur des matériaux mésoporeux hybrides organo-minéraux à grande surface spécifique. Les matériaux adsorbant sélectionnés sont des silices fonctionnalisées par des groupements dithiocarbamate. Après avoir préparé ces supports par greffage au moyen de nouveaux précurseurs siloxydithiocarbamate, les matériaux fonctionnels ont été caractérisés par diverses techniques physico-chimiques et leur comportement en solution a été étudié. Il en ressort que les interactions entre ces fonctions dithiocarbamate et la surface de la silice peuvent conduire à une perte des greffons en milieu aqueux surtout pour des séjours prolongés en solution. Néanmoins, ces solides ont pu être exploités avec succès pour l’immobilisation quantitative des espèces CoII et NiII à partir de solutions diluées (de 1 à 500 µg.L-1), et ce dans la gamme de pH susceptible d’être rencontrée en milieu urinaire. Cette étude a nécessité la mise au point d’une méthode analytique de routine pour la détermination simultanée et quantitative de ces éléments en solution. Il s’agit de la chromatographie haute performance pour laquelle les meilleurs résultats ont été obtenus au moyen la technique dite de commutation de colonne. Les opérations d’adsorption se sont révélées être rapides, ce qui a permis d’opérer efficacement lors de la mise en œuvre de cartouches au travers desquelles les échantillons ont été percolés. Des efforts ont également été consentis de manière à définir les conditions optimales de désorption en vue de l’analyse quantitative des analytes précédemment accumulés. / The main object of the thesis concerns the development of a trapping method for quantitative analysis of carcinogenic - or likely to be - metal ions in urine, allowing to avoid sample transport in a liquid form. Among the metal ions a trace levels, we have been particularly interested in cobalt and nickel species. The approach presented here is based on solid/liquid extraction of metal ions by complexation on mesoporous organic-inorganic hybrid materials with large specific surface areas. The selected adsorbents are silica gels functionalised with dithiocarbamate groups. After their preparation by post-synthesis grafting using new siloxydithiocarbamate precursors, the functionalized silica gels have been characterized by various physico-chemical techniques and their behaviour in solution has been investigated. It shows that interactions between dithiocarbamate moieties and the silica surface can lead to a loss of grafted groups in the external solution, especially for extended periods in aqueous medium. However, these hybrids have been successfully used for quantitative sequestration of CoII and NiII from dilute solutions (1 to 500 µg L-1), within the pH range likely to be encountered in urinary environment. This study has also involved the development of an analytical method for the simultaneous and quantitative determination of these elements in solution. This was based on high performance liquid chromatography for which the best results were obtained using the switching column technique. Adsorption operations have proven to be very fast, which has allowed operating effectively in the implementation of cartridges through which the samples have been percolated. Efforts have also been made to define the optimal conditions for desorption, which was then applied to the quantitative analysis of analytes previously accumulated in the cartridge.

Friction Stir Processing (FSP) is novel technique for localized modification of the surface layer of materials. FSP produces high local strains, strain rates and local temperatures that are 0.8 - 0.9 Tm, where Tm is the melting point. The processing enhances the microstructural and mechanical properties of materials through intense plastic deformation. This thesis examines the microstructure and tensile properties in FSPed Nickel Aluminum Propeller Bronze (NAB) as a function of position in the stir zone using a unique miniature tensile sample design. Test materials were single and multi-pass FSP runs from both 6 mm and 13 mm tools. Tensile ductility was observed to increase from 11 percent to more than 30 percent elongation to fracture at locations along the center of the stir zone. Yield and ultimate strengths also increased two-fold. These improved properties were associated with the formation of WidmanstaÌ tten [a] and fine, equiaxed [a] at peak temperatures of approximately 1000 [degrees] C in these locations. Some locations in the heat affected zone (HAZ) or thermomechanically affected zone (TMAZ) exhibited ductilities below that of as-cast material. Such regions had microstructures that contained a dark-etching constituent formed by cooling after being heated to approximately 800 [degrees] C. / US Navy (USN) author.

M.P.H.(Occupational Hygiene), Faculty of Health Sciences, University of the Witwatersrand, 2009 / BACKGROUND Hearing loss from occupational exposures is a serious and widespread problem in underground nickel mining. This is a major contributor to compensable illnesses resulting not only in costly compensation but posing a serious threat to safety and also reducing the quality of working life. OBJECTIVES The objectives of this study were to identify the prevalence of noise induced hearing loss amongst underground nickel miners with at least 5 years of exposure as well as describe some risk factors for noise induced hearing loss in this occupational setting. METHODS One hundred and sixty eight underground nickel miners, or one hundred percent of eligible workers’ medical records with baseline and periodic audiograms were reviewed to identify the prevalence of noise induced hearing loss and also evaluate some of the risk factors for noise induced hearing loss namely age, duration of exposure, use of oto-toxic agents, high ambient noise levels, hearing impairment, high pre-employment noise levels, history of acoustic trauma, history of ear injury and history of previous military, hunting or police work. One hundred underground mine workers were interviewed to give insight into their pre-employment noise exposure history, non-occupational noise exposure, perceived noise levels at work, knowledge of noise hazards and their control, and the use of hearing protection devices. One hundred and sixty eight workers were observed in their various tasks over a 14 day period and their work practices were scored to identify compliance to the use of hearing protective devices as well as confirm the presence or absence of oto-toxic agents like heavy metals and solvents. Data were analyzed using the EpiInfo software version 3.4.3: 1997 as well as the online statistical package Vassar Stats. RESULTS A noise induced hearing loss prevalence of 27.4% was identified with 42% being mild hearing loss, 28.8% moderate hearing loss and 28.8% moderate to severe noise induced hearing loss. The highest noise induced hearing loss prevalence of 60% was found in the 50 and above years age group whilst 45.5% was found in the 40 – 49 year age group, 20% in the 30- 39 year age group and 5.3 % in the 20 – 29 year age group. This difference was statistically significant ( 2 1 = 19 p < 0.001). Age with a 2 = 24, p< 0.002 and duration of exposure with a 2 = 19, p< 0.001 were found to be major determinants of noise induced hearing loss at the mine. Jackhammer operation and machine operation were found to be associated with noise induced hearing loss compared to the other tasks; Tukey’s Honestly Significant Difference 0.05 = 12.23 p<0.01. The following risk factor was found to be related to noise induced hearing loss: use of quinine OR = 2.16 with CI 95% = 0.12 – 1.72. Ninety seven percent of the workers confirmed exposure to high noise levels. The knowledge of noise induced hearing loss at the mine was high (85%). Compliance with the use of hearing protective devices was found to be low with optimum usage only being achieved during the last 4 days of the 14 day observation period. CONCLUSIONS These findings attest to the relatively high prevalence of noise induced hearing loss at the mine. It can also be concluded that though the knowledge of noise induced hearing loss is high, the effective use of hearing protection still needs improvement through the implementation of comprehensive hearing conservation programs which adequately screen workers at pre-employment stage as well as consider the workers’ perceived knowledge, attitudes as well as practices in an occupational setting.

The ternary Pt-Al-Cr system was investigated as part of the continued development of a thermodynamic database for the Pt-Al-Cr-Ru system. Scanning electron microscopy with energy dispersive X-ray spectroscopy and X-ray diffraction analyses were used to obtain phase equilibria data. The alloys were studied in the as-cast condition, as well as after annealing at 600°C and 1000°C respectively. A solidification projection was constructed and a liquidus surface derived. Isothermal sections at 600°C and 1000°C were also determined. It was concluded that all phase regions were identified correctly since the results were selfconsistent. Three ternary phases were found and 19 ternary invariant reactions identified. A thermodynamic database was developed for the Pt-Al-Cr system using Thermo-Calc. Phase relations could be reasonably accurately predicted between 600°C and 1000°C, and even up to temperatures close to the melting point. However, the match between the calculated and experimental diagrams could be improved. As with the Pt-Cr-Ru system, problems with the constituting binary systems seemed to be the major cause for problems encountered in the modelling. Only once the Al-Pt and especially the Cr-Pt and Cr-Ru binary phase diagrams are confirmed more rigorously, the calculated ternary phase diagrams could be worked on with more confidence. More than half of the alloys investigated had hardnesses in excess of 600 HV10 regardless of their state of heat treatment. Based on the examination of hardness indentations, alloys in the Pt-Al-Cr system were also often brittle due to the presence of hard intermetallic compounds. Alloys containing ~Pt3Al showed better behaviour with regard to toughness which was encouraging for the Pt-based alloys that are being developed by Mintek.

A thesis submitted to the Faculty of Science, University of the Witwatersrand, Johannesburg, in fulfillment of the requirements for the Degree of Doctor of Philosophy. J o h a n n e s b u r g , 2 0 1 3. / Structured carbon nanomaterials have attracted considerable interest because of their unique structures and outstanding properties. Among other structured carbon nanomaterials, carbon nanofibers (CNFs) have been the subject of study for several decades with particular interest having been paid towards their synthesis and application. However, control over the size and shape of these materials still remains a challenge. Three main components necessary for the synthesis of CNFs are the catalyst or template, the carbon source and the source of energy/power. It has been noted that catalyst morphology and the carbon source plays an important role in controlling CNF growth and morphology. As such one of the main challenges is to produce the catalyst particles that would yield the desired CNF morphology. In this study, we investigated methods for controlling the size and morphology of CNFs by synthesizing Ni and Cu catalysts of particular morphology, while using C2H2 and trichloroethylene (TCE) as a carbon source for the synthesis of CNFs. A mixture of TCE/C2H2 was also employed as a carbon source for comparison. The catalysts and synthesized CNFs were characterized by different techniques such as TEM, XRD, TPR, TGA, Raman spectroscopy, IR spectroscopy, etc. The synthesis of Ni nanoparticles (NPs) was achieved by reduction of Ni(acetate)2 with hydrazine (35%). CNFs were synthesized by deposition of TCE, C2H2 and their mixtures using a chemical vapor deposition technique (CVD) in the temperature range 400-800 oC. N2 and CO2 were used as carrier gases. TEM analysis of the Ni particles as a function of time revealed that the Ni underwent a morphological change with time. Further, as the temperature of the reaction changed, so did the shape of the carbon materials. The shapes changed from structures showing bilateral growth at T = 400 oC to tripod-like structures and multipod-like structures at T = 450 oC and T = 500 oC respectively. Irregular shaped materials were observed at T > 500 oC. It was also found that when acetylene or an acetylene/trichloroethylene mixture was used at T = 450 oC, helical (> 80%) and linear fibers were produced respectively. It was also demonstrated that the flow rate of H2, N2 and CO2 had a dramatic influence on the morphology of CNFs. CO2/TCEwas found to produce linear fibers with controlled sizes at 800 oC. The results demonstrated that the formation of tripod CNFs only occurs in a very narrow parameter regime. Manoko S. Maubane The preheating of the TCE prior to its deposition over a Ni particle catalyst was achieved using a double stage CVD reactor. TCE was subjected to high temperatures prior to its deposition at low temperatures. Results showed that the decomposition temperature was the key parameter in the synthesis of CNFs. It was found that during the decomposition, TCE breaks down into different species/radicals which then adsorb onto the catalyst particle to give CNFs of different morphology. Raman studies revealed that the synthesized CNFs showed an increase in graphitic nature when the temperature in the first reactor of a two stage reactor was increased. Decomposition of C2H2 was also performed over Cu NPs, and Cu modified catalysts (Cu@SiO2 and Cu/SiO2) with different silica coatings at 300 oC. These catalysts were prepared by reduction of Cu(acac)2 with hydrazine (35%). TEM images revealed that coiled CNFs were only produced from Cu/SiO2 grown in the presence of H2 (> 90 %; d = 60-70 nm). IR spectra of all the CNFs indicated the presence of surface C=C, C=O, CH3 and CH2 moieties, and that the ratios of peak intensities of C=O/CHx and C=C/CHx species indicated the variable CNF surface that was produced by the gases and the Cu particles used. It was thus revealed that the CNFs produced by different Cu catalysts have different chemical and physical properties and that these properties correlate with catalyst particle size and the gas mixtures used. CuO and SrO modified Cu catalysts (with different Cu/Sr ratios) were also employed using the CVD method for the synthesis of CNFs at 300 oC. These catalysts were prepared by a coprecipitation method. The TEM images of the CNFs revealed a mixture of straight and coiled CNFs with a broad diameter distribution (50-400 nm) dependent on the Cu/Sr ratio of the catalyst used. IR and TGA analysis revealed that the chemical composition of the CNFs changed as the SrO content changed. The SrO content also affected the Cu particle size and influenced the morphology of the Cu particles from which the CNFs grew.

Although the terrestrial flux of solar energy is enough to support human endeavors, storage of solar energy remains a significant challenge to large-scale implementation of solar energy production. One route to energy storage involves the capture and conversion of sunlight to chemical species such as molecular hydrogen and oxygen via water splitting devices. The oxygen evolution half-reaction particularly suffers from large kinetic overpotentials. Additionally, a photoactive material that exhibits stability in oxidizing conditions present during oxygen evolution represents a unique challenge for devices. These concerns can be potentially addressed with a metal oxide photoanode coupled with efficient water oxidation electrocatalysts. Despite decades of research, structure-composition to property relationships are still needed for the design of metal oxide oxygen evolution materials. This dissertation investigates transition metal oxide materials for the oxygen evolution portion of water splitting devices. Chapter I introduces key challenges for solar driven water splitting. Chapter II elucidates the growth mechanism of tungsten oxide (WOX) nanowires (NWs), a proposed photoanode material for water splitting. Key findings include (1) a planar defect-driven pseudo-one-dimensional growth mechanism and (2) morphological control through the supersaturation of vapor precursors. Result 1 is significant as it illustrates that common vapor-phase syntheses of WOX NWs depend on the formation of planar defects through NWs, which necessitates reconsideration of WOX as a photoanode. Chapter III presents work towards (1) single crystal WOX synthesis and characterization and (2) WOX NW device fabrication. Chapter IV makes use of the key result that WOX NWs are defect rich and therefore conductive in order to utilize them as a catalyst scaffold for oxygen evolution in acidic media. Work towards utilizing NW scaffolds include key results such as stability under anodic potentials and strongly acidic conditions used for oxygen evolution. Chapter V includes work characterizing nickel oxide/oxyhydroxide oxygen evolution catalysts at near-neutral pH. Key findings include (1) previous reports of anodic conditioning resulting in greater catalytic activity are actually due to incidental incorporation of iron impurities from solution and (2) through intentional iron incorporation via electrochemical co-deposition, catalytic activity is increased ~50-fold over Fe-free catalysts. This dissertation contains previously published coauthored material.

Thesis advisor: Kian L. Tan / Thesis advisor: Dunwei Wang / Silicon nanowires are utilized to harvest the energy from visible light. The introduction of a nickel pre-catalyst, 1, allows for this energy to be stored in chemical bonds, which are subsequently used in the carboxylation of 4-octyne. / Thesis (MS) — Boston College, 2014. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.