Amphiphilic tri- and penta-block copolymers containing a polyurethane central block with pendant carboxylic acid groups flanked by hydroxyl functional polyether tails were synthesized. Our intention was to investigate the activities of these copolymers as dispersants for magnetite nanoparticles in biological media. A benzyl alkoxide initiator was utilized to prepare poly(ethylene oxide) (BzO-PEO-OH), poly(propylene oxide) (BzO-PPO-OH) and poly(ethylene oxide-b-propylene oxide) (poly(BzO-EO-b-PO-OH)) oligomeric tail blocks with varying lengths of PEO and PPO. The oligomers had a hydroxyl group at the terminal chain end and a benzyl-protected hydroxyl group at the initiated end. The polyether oligomers were incorporated into a block copolymer with a short polyurethane segment having approximately three carboxylic acid groups per chain. The block co-polyurethane was then hydrogenated to remove the benzyl group and yield primary hydroxyl functionality at the chain ends. End group analysis by 1H NMR showed the targeted ratio of PEO to PPO demonstrating control over block copolymer composition. Number average molecular weights determined by both 1H NMR and GPC were in agreement and close to targeted values demonstrating control over molecular weight. Titrations of the pentablock copolymers showed that the targeted value of approximately three carboxylic acid groups per chain was achieved. Heterobifunctional poly(ethylene oxide) (PEO) and poly(ethylene oxide-b-propylene oxide) (PEO-b-PPO) copolymers were synthesized utilizing heterobifunctional initiators to yield polymers having a hydroxyl group at one chain end and additional moieties at the other chain end. For PEO homopolymers, these moieties include maleimide, vinylsilane, and carboxylic acid functional groups. Heterobifunctional PEO oligomers with a maliemide end group were synthesized utilizing a double metal cyanide coordination catalyst to avoid side reactions that occur with a basic catalyst. PEO oligomers with vinylsilane end groups were synthesized via alkoxide-initiated living ring-opening polymerization, and this produced polymers with narrow molecular weight distributions. Heterobifunctional PEO-b-PPO block copolymers were synthesized in two steps where the double metal cyanide catalyst was used to polymerize propylene oxide (PO) initiated by 3-hydroxypropyltrivinylsilane. The PPO was then utilized as a macroinitiator to polymerize ethylene oxide (EO) with base catalysis. Heterobifunctional PEO and PEO-b-PPO block copolymers possessing carboxylic acid functional groups on one end were synthesized by reacting the vinyl groups with mercaptoacetic acid via an ene-thiol addition. / Ph. D.

Lead sorption efficiencies (sorption per surface area) were measured for a number of natural and synthetic Mn and Fe-oxides using a flow through reactor. The Mn-oxide phases examined included synthetic birnessite, natural and synthetic cryptomelane, and natural and synthetic pyrolusite; the Fe-oxides studied were synthetic akaganeite, synthetic ferrihydrite, natural and synthetic goethite, and natural and synthetic hematite. The sorption flow study experiments were conducted with 10 ppm Pb with an ionic strength of either 0.01 M NaNO3 or 0.01 M KNO3 both at pH 5.5. The experimental effluent solution was analyzed using aqueous spectroscopic methods and the reacted solids were analyzed using microscopy (field emission scanning electron microscopy, FE-SEM), structure analysis (powder X-ray diffraction, XRD), bulk chemical spectroscopy (energy dispersive spectroscopy, EDS), and surface sensitive spectroscopy (X-ray photoelectron spectroscopy, XPS). Overall, the synthetic Mn-oxides did have higher sorption efficiencies than the natural Mn-oxides, which in turn were higher than the natural and synthetic Fe-oxides. Only natural pyrolusite had a sorption efficiency as low as the Fe-oxides. Most of the natural and synthetic Fe-oxides examined in this study removed about the same amount of Pb from solution once normalized to surface area, although synthetic akaganeite and hematite were significantly less reactive than the rest. The observed efficiency of Mn-oxides for Pb sorption is directly related to internal reactive sites in the structures that contain them (birnessite and cryptomelane, in the case of this study). Comparisons of solution data to XPS data indicated that Pb went into the interlayer of the birnessite, which was supported by XRD; similarly some Pb may go into the tunnels of the cryptomelane structure. Layer structures such as birnessite have the highest Pb sorption efficiency, while the 2 x 2 tunnel structure of cryptomelane has lower efficiencies than birnessite, but higher efficiencies than other Mn- or Fe-oxide structures without internal reactive sites. / Ph. D.

Yes / Catalysts play a vital role in petroleum and chemical reactions. Intensified concerns for cleaner air with strict environmental regulations on sulfur content in addition to meet economic requirements have generated significant interests for the development of more efficient and innovative oxidative catalysts recently. In this study, a novel homemade nano catalyst (manganese oxide (MnO2) over tin (IV) oxide (SnO2)) was used for the first time as an effective catalyst in removing dibenzothiophene (DBT) from kerosene fuel using hydrogen peroxide (H2O2) as oxidant in catalytic oxidative-extractive desulfurization process (OEDS). The catalyst was prepared by impregnation method with various amount of MnO2 loaded on SnO2. The oxidation step was carried out at different operating parameters such as reaction temperature and reaction time in batch reactor. The extractive desulfurization step was performed by using acetonitrile as solvent under several operating conditions (agitation speed and mixing time). The activity of MnO2/SnO2 catalyst in removing various sulfur compounds from kerosene fuel at the best operating conditions was investigated in this work. The results of the catalyst characterization proved that a high dispersion of MnO2 over the SnO2 was obtained. The experiments showed that the highest DBT and various sulfur compounds removal efficiency from kerosene fuel under the best operating conditions (oxidation: 5% MnO2/SnO2, reaction temperature of 75 0C, and reaction time of 100 min, extraction: acetonitrile, agitation speed of 900 rpm, and mixing time of 30 min) via the catalytic oxidative-extractive desulfurization process was 92.4% and 91.2%, respectively. Also, the MnO2/SnO2 catalyst activity was studied after six consecutive oxidation cycles at the best operating conditions, and the catalyst prove satisfactory stability in terms of sulfur compounds removal. After that, the spent catalyst were regenerated by utilizing different solvents (methanol, ethanol and iso-octane), and the experimental data explained that iso-octane achieved highest regeneration efficiency. / This study was supported by College of Petroleum Processes Engineering, Tikrit University, Iraq and Ministry of Oil, Iraq.

No description available.

published_or_final_version / abstract / toc / Pharmacology / Master / Master of Philosophy

published_or_final_version / abstract / Chemistry / Doctoral / Doctor of Philosophy

published_or_final_version / abstract / Pharmacology / Master / Master of Philosophy

Thin films are an enabling technology for a wide range of applications, from microprocessors to diffusion barriers. Nanolaminate thin films combine two (or more) materials in a layered structure to achieve performance that neither film could provide on its own. Atomic layer deposition (ALD) is a chemical vapor deposition technique in which film growth occurs through self limiting surface reactions. The atomic scale control of ALD is well suited for producing nanolaminate thin films. In this thesis, ALD of two nanolaminate systems will be investigated: Al₂O₃-Ta₂O₅ and ZnO-SnO₂. Al₂O₃ and Ta₂O₅ are high κ dielectrics that find application as gate oxides for field effect devices such as metal oxide semiconductor field effect transistors and thin film transistors. Al₂O₃-Ta₂O₅ nanolaminate films of a fixed composition and total thickness, but with varied laminate structures, were produced to explore the influence of layer thickness on dielectric behavior. Layer thickness was found to have little impact on the dielectric constant but a strong impact on the leakage current. Thick layered nanolaminates (with 2.5 to 10 nm layers) performed better than either pure material. Showing structure provides a means of tailoring nanolaminate properties. ZnSnO is an amorphous oxide semiconductor used to make transparent TFTs. Although ALD is naturally suited to the production of nanolaminates, the deposition of homogenous ternary compounds is still uncommon. For very thin depositions, nucleation behavior can dominate, resulting in ALD growth rates different than for thicker films. Initial work on ALD of the ZnO-SnO₂ system is presented, focusing on nucleation and growth of each material on the other. It was found that both ZnO and SnO₂ inhibit the growth of one another and a method was developed to characterize the average growth rate for few cycle depositions. / Graduation date: 2011

No description available.

No description available.