Along with rapid development of information technology, all kinds of algorithms have been presented, to achieve significant progress in image tracking. Most methods tend to identify features of moving objects, and filter out background components which do not meet these features. This thesis uses a spatio-temporal planar-resonant filter to accomplish moving object tracking tasks. Under the condition without prior knowledge about features of moving objects, choosing appropriate filter¡¦s parameters is able to enhance the object with a certain moving speed and reduce intensity of objects with different velocities. Nevertheless, this filter cannot solve the problem background filtering. Therefore, a homomorphic filtering with fast optical flow estimation is implemented to identify and separate the background and moving components in dynamic images. This thesis also considers different 3-D bandwidth parameters. To develop a systematic approach to design filter¡¦s parameters for actual implementations.

This dissertation aims to design and implement wireless passive components using domestic integrated passive device (IPD) technology. The research focuses on exploiting novel 3-D structures for various kinds of IPD-based wireless passive components including high-quality and high-efficiency planar transformers, baluns, filters, and combiners to achieve miniature size and high performance. A physical model has been developed for modeling the planar transformers. In this dissertation, a scalable transformer model in integrated passive device technology is further used to correlate with the coupled-line sections of a conventional Marchand balun. This improves the efficiency of the design of planar transformers with equivalent coupled-line parameters such as the coupling factor, and even- and odd-mode characteristic impedances and quality factors. Additionally, the proposed model-based design approach provides effective optimization techniques that incorporate geometrical and material parameters. In addition, a compact transformer-based coupled balun bandpass filter design is proposed based on integrated circuit technology and the equivalent circuit is established. Using a planar transformer with high-density fully symmetrical wiring not only greatly reduces the component size but also provides a superior stopband rejection and selectivity. Finally, by using the spiral-shaped resonators, the dual-band third-order bandpass filter has been implemented on organic substrates. The proposed BPF design is verified to overcome the elements¡¦ parasitic effects, and thus can be miniaturized and optimized with high degree of freedom. The simulation and measurement results have good agreement for the proposed design in this dissertation.

This dissertation studies and implements highly miniaturized bandpass filter designs for wireless System-in-Package (SiP) applications. Based on the coupling matrix synthesis method, the external quality factors and coupling coefficients can be extracted by selecting the proper tapped-line feeding position and coupling spacing in geometrical configuration. Despite their high performance, most conventional microstrip bandpass filter designs require a bulky area for achieving, making them difficult to implement SiP applications. This dissertation first develops a stacked LC resonator and a stacked spiral resonator (SSR) in an embedded passive substrate (EPS) for realizing miniature single- and multi-band bandpass filters. Moreover, multiple transmission zeros created on both sides of each passband provide high stopband roll-off rates. The designed performance and size are comparable to those of low-temperature co-fired ceramic (LTCC) bandpass filters. As another conventional means of implementing RF passive components, the integrated passive device (IPD) process can produce large-value inductors and high-density capacitors, simultaneously. This dissertation fully utilizes the advantages of IPD technology to implement very compact bandpass filter designs with multiple transmission-zero frequencies at stopband by using a high-density wiring planar transformer configuration. Furthermore, due to the fully symmetric geometry, the transformer-coupled bandpass filter can be easily converted into a balun bandpass filter, capable of providing a superior balance performance with a significantly higher common mode rejection ratio (CMRR) level. The electromagnetic (EM) simulation results, as obtained by using Ansys-Ansoft HFSS, agree with the measurement results for all of the proposed designs in this dissertation.

Proton echo planar spectroscopic imaging(PEPSI) is a novel and rapid technique of magnetic resonance spectroscopic imaging(MRSI). To analyze the metabolite in PEPSI by using LCModel, an automatic reconstruction system is necessary. Recently, many researches use graphic processing unit(GPU) to accelerate imaging reconstruction, and Compute Unified Device Architecture(CUDA) is developed by C language, so the programmers can write the program in parallel computing easily. PEPSI data acquisition includes non water suppression and water suppression scans, each scan contains odd and even echoes, these two data are reconstructed separately. The image reconstruction contains k-space filter, time-domain filter, three-dimension fast Fourier transform(FFT), phase correction and combine odd and even data. We use MATLAB, C++ and parallel computing to implement PEPSI reconstruction, and parallel computing applied CUDA which proposed by NVIDIA. In our study, the averaged non water suppression spectroscopic imaging executed by three different programming language are almost the same. In our data scale, the execution time of parallel computing is faster than MATLAB and C++, especially in the FFT step. Therefore, we simulated and compared the performance of one- to three-dimension FFT. Our result shows that accelerating performance of GPU depends on the number of data points according to the performance of FFT and the execution time of single coil PEPSI reconstruction. While the amount of data points is larger than 65536, as demonstrated in our study, parallel computing contribute in terms of computational acceleration.

This thesis presents the analysis, design, and fabrication of a spherical inverted-F antenna (SIFA). The SIFA consists of a spherically conformal rectangular patch antenna recessed into a quarter section of a metallic sphere. The sphere acts as a ground plane, and a metal strip shorts the patch to the metallic sphere. The SIFA incorporates planar microstrip design into a conformal spherical geometry to better meet the design constraints for integrated wireless sensors. The SIFA extends a well-established technology into a new application space, including microsatellites, mobile sensor networks, and wireless biomedical implants. The complete SIFA design depends on several parameters, several of which parallel planar design variables. A modified transmission line model determines the antenna input impedance based on the sphere's inner and outer radii, the patch length and width, short length and width, and feed position. The SIFA can be tuned to the desired frequency band by choosing the proper outer radius, after which the antenna can be matched by tuning the short characteristics, patch dimensions, and feed position. The fabricated design was chosen to operate at the MICS band (402-405 MHz), a popular band for biomedically implanted devices. An initial design was constructed with Styrofoam (epsilon r approximately equal to 1) and copper tape. Simulation in HFSS corroborates that SIFA operation incorporates the MICS band, with resonant frequency of 404 MHz and 32 MHz (7.9%) bandwidth. The fabricated prototype performs similarly, with a resonant frequency of 407 MHz and 19 (4.7%) MHz bandwidth. Following fabrication, several modifications were implemented to miniaturize the SIFA and introduce additional functionality. Slot loading and dielectric coating were implemented to achieve SIFA miniaturization. Multiple elements were also introduced to achieve dual band operation and beam steering. A miniaturized SIFA was investigated in several biological media, and a lossy coating implemented to maintain impedance match in several different media, with the goal of retaining a matched impedance bandwidth in the MICS band.

This thesis proposes a variety of antenna designs suitable for modern of mobile products, such as mobile phones, PDAs and so forth, on both the 2G and 3G communication systems according to the mobile communication development. Based on the integration of monopole or planar inverted-F antenna with the system ground planes, multi-frequency, broadband, and high radiation efficiency can be achieved, which is very promising to be adapted into communication products. Furthermore, an antenna capable of WLAN and UWB is proposed for future wireless communication applications.

Novel and low-cost antennas suitable for WLAN access points are presented. The operating bandwidths of the proposed antennas can cover the 2.4/5.2/5.8 GHz WLAN bands, and the antenna gain is larger than 2 and 4 dBi in the 2.4 and 5 GHz bands; respectively. Besides, they can also generate the good omnidirectional radiation patterns in the azimuthal plane. Dipole antenna, folded dipole antenna, monopole antenna and circularly polarized antenna has been applied in the proposed designs, and good antenna performance has been obtained.

This paper proposes novel PIFA and monopole designs for dual-band or multi-band wireless communications, especially for mobile phones and CF (compact flash) card. The dual-frequency designs for mobile phone mainly utilize one or more metal branch strips to excite two resonant modes. By tuning the dimensions of branch strips, the ratio of the antenna¡¦s first two resonant frequencies can be achieved to be about 2.0, which makes it very promising for 900/1800 MHz operations. In addition, the broadband and quad-band (AMPS/GSM/DCS/PCS) designs for mobile phone application are also proposed. The broadband antenna design, unlike the above-mentioned dual-frequency designs for operating at two separate resonant modes, is more suitable to cover several nearby communication bands (DCS/PCS/UMTS/WLAN 2.45 GHz). The quad-band antenna design utilizes a £k-shape matching bridge to achieve a wider bandwidth both in lower and higher bands. For CF Card application, the triangular chip antenna having one longer and one shorter strip lines can generate the lower and higher modes covering the WLAN 2.4 and WLAN 5.2/5.8 GHz bands. All the antenna designs proposed are very promising to be concealed within the housing of the mobile phones or CF card.

Novel printed monopole antennas, including diversity antennas, monopole array antennas and broadband antennas for WLAN operation, are experimentally studied and presented in this dissertation. These proposed antennas can be printed on dielectric substrates and practically integrated with system circuit boards by using printed circuit board technique. Also, the proposed antennas are low cost in fabrication and the reliability of system circuit boards can be improved. First, the design of the diversity antenna, which mainly comprises two substantially orthogonal printed monopoles and are placed symmetrically with respect to a protruded ground plane of T shape, shows good isolation between the two feeding ports of the proposed antenna. Second, the design of the printed array antenna, which comprises three equally-spaced equilateral-triangular monopoles, is proposed. Among the three monopoles, the center one has a larger size, which mainly controls the lower operation band, and the other two monopoles have a smaller size for higher operation band and show higher antenna gain and wider operating bandwidth. Finally, the quasi-self-complementary antenna is introduced. With compact size and wide bandwidth achieved, the proposed antenna is suitable for a mobile communication device, and can also provide good spatial diversity to combat the multi-path interference problem when mounting two proposed antennas appropriately spaced on a WLAN card.

In this thesis the study mainly focuses on the trends in development of present-day mobile phones and provides a promising alternative for integrating various elements inside mobile phones. With the presence of a small ground plane protruded from the main circuit board of a mobile phone, the proposed antenna design is substantially different from the configuration of feeding the conventional internal patch or planar inverted-F antenna (PIFA), and the proposed antenna can be placed in close proximity to the RF shielding case in the mobile phone, with very small effects on the antenna performances. Thus, more flexibility in the integration between an internal antenna and other associated elements inside a mobile phone can be obtained. In addition, by making use of the space inside the shorting cylinder of the internal PIFA, which can be treated as a shielding wall, the lens module of an embedded digital camera or other possible practical modules can easily fit in the cylinder to satisfy the trends in development of the miniaturized and multi-function mobile phones.