Techn. Hochsch., Diss.--Aachen, 2006.

Thesis (Ph.D.(Chemistry))--University of Pretoria, 2004. / Summaries in English and Afrikaans. Includes bibliographical references (leaves 229-238). Also available online.

The focus of this report is an examination of the so-called “refusenik” soldiers of Israel. Since Israel’s victory in the 1967 war and the resulting occupation of the West Bank and Gaza Strip, there have been soldiers in the IDF that have refused to serve outside the pre-1967 borders. These soldiers, called “refuseniks,” practice selective refusal. Unlike conscientious objectors, the refusenik soldiers are not pacifists. Their protest is not a condemnation of all war. Rather, it is a calculated protest against the continuing occupation of land outside the Green Line. Although the roots of the refusenik movement can be traced to the 1967 war, the movement did not gain momentum until the 1982 invasion of Lebanon. Initially enjoying broad public support, the war in Lebanon became less popular when it did not end after its initial goals were met. Yesh Gvul, the most famous of the refusenik organizations, was born during this time of waning public support for the war. Other boosts for the refuseniks have come during the first intifada and second intifada. The refuseniks come from varied backgrounds and political affiliations, but the “typical” refusenik is the Ashkenazi male reservist, usually statistically speaking a married, highly educated city-dweller. The military has not followed a coherent strategy for dealing with the refuseniks, alternating between conciliation and accommodation at some time periods and harsh punishment at others. / text

Individuals with autism spectrum disorders (ASD) use atypical approaches when processing facial stimuli. The first purpose of this research was to investigate face processing abilities in adults with ASD using several tasks, to compare patterns of interference between static identity and expression processing in adults with ASD and typical adults, and to investigate whether the introduction of dynamic cues caused members of one or both groups to shift from a global to a more local processing strategy. The second purpose was to compare the gaze behaviour of groups of participants as they viewed static and dynamic single- and multiple-character scenes. I tested 16 adults with ASD and 16 sex-, age-, and IQ-matched typical controls. In Study 1, participants completed a task designed to assess processing speed, another to measure visual processing bias, and two tasks involving static and dynamic face stimuli -- an identity-matching task and a Garner selective attention task. Adults with ASD were less sensitive to facial identity, and, unlike typical controls, showed negligible interference between identity and expression processing when judging both static and moving faces. In Study 2, participants viewed scenes while their gaze behaviour was recorded. Overall, participants with ASD showed fewer and shorter fixations on faces compared to their peers. Additionally, whereas the introduction of motion and increased social complexity of the scenes affected the gaze behaviour of typical adults, only the latter manipulation affected adults with ASD. My findings emphasize the importance of using dynamic displays when studying typical and atypical face processing mechanisms. / October 2015

In an effort to gain a more comprehensive and complete understanding of the thermal behaviors occurring during the selective laser sintering process, external temperature measurements were taken during the build process. To accomplish this, an infrared camera was aimed directly through a viewport on the front of the sinterstation. The temperature was monitored during the heating process which showed slightly non-uniform heating of the part bed surface. Temperatures were also recorded while the laser was sintering each layer and the subsequent cooling of the entire machine following the build. By directly capturing infrared images of the part bed’s surface, it is clearer how the temperature gradients behave and the impact such variables have on part build efficiency. / text

The Laser Ablation of Microparticle Aerosols (LAMA) process produces nanoparticles by ablating microparticles that are entrained in an aerosol. Two of the main advantages of this process are that the particles produced are charged (preventing agglomeration) and bare (without a capping layer). Two different techniques are possible to collect the nanoparticles. In this work, the charged state of the particles formed was utilized to collect them electrostatically. This approach has the additional advantage that particles can be selected according to their size. The focus here was a particular application for gas separation. The nanoparticles produced were directly collected in a polymeric liquid, which was then irradiated with ultraviolet light to form a rubbery film. These membranes were tested for olefin/paraffin gas separation, a challenge that finds many applications, notably in the petroleum industry. / text

The aim of this thesis is the development of solid contact ion selective electrodes, ISEs, where the transducer layer is made of a network of carbon nanotubes.Potentiometric classical ion selective electrodes (ISEs) have been used for analytical applications since the beginning of 1900's. Determination of pH by a glass membrane ion selective electrode emerged at the beginning, being the first ISEs developed. pH glass electrode is still one the most useful and robust sensors for routine measurements both in laboratories and industries.Throughout the years, new technologies, ideas and designs have been developed and incorporated successfully in the potentiometric fields so as to provide answers to the new society's needs. Therefore, the ion selective electrodes developed in this thesis are a step further in the progress of ISEs and must be considered as products of the scientific envisioning, growth, and interdisciplinary cooperation of many research teams over many years of continuous efforts. The sensing part can be regarded nowadays as well developed, although it has been during only the last few years when considerable improvements have taken place in the development of new polymeric membranes, ionophores and lipophilic ions. Moreover, the understanding of the theoretical sensing mechanism has been a powerful solid backbone in the rise of ISEs. Miniaturization of classical ISEs requires making all solid contact electrodes to avoid the intrinsic drawbacks of the inner solution. In this manner, the transduction layer has been the focus of attention for the two last decades. New solid contact transducers having the capacity to convert an ionic current into an electronic current have been emerging. Within them, conducting polymers have played an important role in the transduction of the potentiometric signal, being the most used in solid contact ion selective electrodes (SC-ISEs) up to now. However, the behaviour of conducting polymers can be further improved. For instance, their sensitivity to light one of main operational issues yet to be solved.In the present context of searching for new materials able to transduce potentiometric signals we selected and tested carbon nanotubes (CNTs). CNTs, which were rediscovered by Ijima in 1991, display excellent electronic properties in terms of signal transduction. In addition, due to their chemical reactivity CNTs can be easily functionalized with receptors or other functional groups. In fact, depending on the type of functionalization the macroscopic and microscopic properties of CNTs can be drastically changed. This nanostructured material had not been used previously as a solid contact material in ISEs.The main aim of this thesis is to demonstrate that CNTs can act as a clean and efficient transducer in SC-ISEs overcoming the drawbacks displayed by the previously assayed solid contact materials. The developed electrodes were used in different conditions to determine several ions in different sample types, demonstrating the capabilities of this nanostructured material.The thesis has been structured in different chapters, each one containing the following information:· Chapter 1 provides a short historical overview of potentiometric ISEs. The evolution from the "classical ISEs" to the SC-ISEs is briefly illustrated. Once the motivation for thesis is described, the general and specific objectives of the thesis are reported.· Chapter 2 reports the scientific foundations of the developed electrodes. All components of the ISE, sensing layer, transducers and detection systems are introduced. Analytical performance characteristics of ISEs are also described.· Chapter 3 corresponds to the experimental part. Reagents, protocols, procedures and instruments used in the thesis are reported.· Chapter 4 provides the demonstration that CNTs can act as a transducer layer in SC-ISEs. The first SC-ISEs based on CNTs are characterized by electrochemical and optical techniques.· Chapter 5 contains the experimental results that lead to the elucidation of the possible transduction mechanism of CNTs in SC-ISEs. Electrochemical impedance spectroscopy (EIS) is employed as the main characterization technique. · Chapter 6 is composed of four sections reporting different analytical applications. In the first section, the common pH electrode is developed using a solid contact technology based on CNTs. In the second section, the development of SC-ISEs based on a new synthetic ionophore selective to choline, and CNTs as transducers is shown. In the third section, watertight and pressure-resistant SC-ISEs based on CNTs are developed and tested in aquatic research to obtain information about the gradient profiles along the depth of the lakes. In the fourth section, SC-ISEs based on CNTs are adapted for the on-line control of a denitrification catalytic process.· Chapter 7 reports the possibilities of miniaturization of the SC-ISEs based on CNTs to reach a nanometric electrode. Potentiometric and optical characterizations are described in this section. Moreover, a discussion about the limitations of the real miniaturization in potentiometry is undertaken.· Chapter 8 points out the conclusions of the thesis. In addition, future prospects are suggested.· Finally, several appendices are added to complete the doctoral thesis. / El principal objetivo de esta tesis es el desarrollo de electrodos selectivos de iones de contacto sólido, ESIs-CS, utilizando como capa transductora una red compuesta de nanotubos de carbono.Los electrodos potenciométricos selectivos de iones han sido utilizados en aplicaciones analíticas desde comienzos de 1900. La determinación de pH mediante electrodos de vidrio selectivo de iones fue el primer ESI desarrollado. Hoy en día, el electrodo de vidrio para la determinación de pH es todavía uno de los más útiles y robustos sensores utilizados en mediciones rutinarias tanto en laboratorios como en industrias.A lo largo de los años, nuevas tecnologías, ideas y diseños han sido desarrollados e incorporados satisfactoriamente en el campo potenciométrico proporcionando soluciones a las necesidades en continua evolución de la sociedad. De esta manera, los electrodos selectivos de iones desarrollados en esta tesis son un paso más en el progreso de los ESIs y deben ser considerados como el producto de una sólida base científica, del crecimiento y de la cooperación interdisciplinaria de diversos grupos de investigación durante varios años.La parte del sensor donde tiene lugar el reconocimiento químico y donde se genera el potencial dependiente de la muestra en estudio en los ESIs se puede considerar, en estos días, ampliamente desarrollada, aunque considerables mejoras han tenido lugar durante los últimos años, especialmente en el desarrollo de nuevas membranas poliméricas, ionóforos e iones lipofílicos. Sobretodo, el estudio y la comprensión del mecanismo teórico del sensor ha sido muy importante en el crecimiento y desarrollo de los ESIs.El concepto de electrodos selectivos de iones de estado sólido surge como requisito vital para evitar las intrínsecas desventajas de la solución interna, en el proceso de miniaturización de los ESIs clásicos. De esta forma, la capa transductora ha sido el principal punto de atención durante dos décadas. Así, nuevos transductores de contacto sólido con la capacidad de convertir una corriente iónica en una corriente electrónica han sido desarrollados. Entre ellos, los polímeros conductores han jugado un importante papel en la transducción de la señal potenciométrica, siendo éstos los más empleados en los electrodos selectivos de iones de contacto sólido (ESIs-CS). Sin embargo el comportamiento de los polímeros conductores puede ser mejorado. Por ejemplo, la sensibilidad hacia la luz de estos materiales es un inconveniente todavía no resuelto. En este contexto de investigación de nuevos materiales capaces de actuar como transductor de una señal potenciométrica, se han escogido y estudiado los nanotubos de carbono (NTCs) como transductores. Los NTCs fueros redescubiertos por Ijima en 1991, y muestran excelentes propiedades electrónicas en términos de traducción de señal. Además, debido a su reactividad química, los NTCs pueden ser fácilmente funcionalizados con receptores u otros grupos funcionales. De hecho, sus propiedades macroscópicas y microscópicas pueden ser afectadas drásticamente dependiendo del tipo y grado de funcionalización. Este material nanoestructurado no había sido previamente utilizado como transductor en ISEs.El principal propósito de esta tesis es demostrar que los nanotubos de carbono pueden actuar de forma eficiente como transductor en electrodos selectivos de iones de estado sólido logrando vencer las desventajas de los transductores previamente mencionados. Los electrodos desarrollados fueron usados en diferentes condiciones para determinar distintos iones en diversos tipos de sistemas, demostrando las extraordinarias capacidades de este material nanoestructurado. Esta tesis ha sido estructurada en capítulos que contienen la siguiente información:· El Capítulo 1 proporciona una breve visión histórica de lo electrodos potenciométricos selectivos de iones. Se ilustra la evolución desde los "clásicos ESIs" hasta los actuales "ESIs-CS". Además se señalan en esta sección los objetivos generales y específicos. · El Capitulo 2 contiene las bases científicas de los electrodos desarrollados. Se introducen todos los componentes que integran un ESI, tales como: capa reconocedora, capa transductora y sistema de detección. A continuación se describen los parámetros analíticos de calidad de los ESIs. · El Capitulo 3 describe la parte experimental. Se recogen los reactivos, protocolos, procedimientos e instrumentos usados a lo largo de la tesis.· El Capitulo 4 provee de la demostración de que los NTCs pueden actuar eficientemente como capa transductora en SC-ISEs. Se caracteriza el primer ESI-CS integrado por NTCs mediante técnicas ópticas y electroquímicas.· El Capitulo 5 contiene los resultados experimentales que permiten la posible elucidación del mecanismo de transducción de los NTCs en los ESIs-CS. La Espectroscopia de Impedancia Electroquímica (ESI) es utilizada como la principal técnica de caracterización. · El Capitulo 6 está integrado por cuatro secciones con diferentes aplicaciones analíticas. En la primera sección, se desarrolla un electrodo de pH que usa NTCs como nueva tecnología transductora en ESIs-CS. En la segunda sección se muestra el desarrollo de un ESI-CS integrado por un ionóforo sintético selectivo a colina, y NTCs como transductores. En la tercera sección, ESIs-CS basados en NTCs, resistentes a altas presiones y totalmente herméticos, se desarrollan y prueban en investigaciones acuáticas con la finalidad de obtener información sobre los gradientes de concentración de iones en función de la profundidad de un lago. En la cuarta sección ESIs-CS basados en NTCs se adaptan para el control on-line de un proceso catalítico de desnitrificación.· El Capitulo 7 presenta la posibilidad de la miniaturización de los ESIs-CS basados en NTCs logrando obtener un electrodo nanométrico. Se muestran en esta sección la caracterización óptica y potentiométrica. Además, se discuten las limitaciones de la miniaturización real de los ESIs en potenciometría.· El Capitulo 8 contiene las conclusiones de la tesis. Adicionalmente, se sugieren las perspectivas futuras del trabajo presentado.· Finalmente, se añaden algunos apéndices como complemento de la tesis doctoral.

Patterned arrays of metallic nanostructures are commonly used in photonics, electronics, as well as functional materials and biotechnology because of their unique electronic and optical properties. Although great effort has been devoted to the development of nano-patterning techniques in the past decades, there are still existing challenges for nano-fabrication to achieve fine resolution and complex features over macroscopic areas in a reasonable time period. Herein, we devise two versatile patterning strategies, namely indentation colloidal lithography (ICL) and oblique colloidal lithography (OCL), for the stepwise patterning of planar substrates with numerous complex and unique designs. Those strategies combine colloidal self-assembly, imprint molding in conjunction with capillary force lithography and reactive ion etching, all of which are simple and straightforward. Hexagonal arrays of symmetric and nonconcentric gold features are fabricated on glass substrates with highly controllable geometric parameters. The width, size and asymmetry of each surface structure could be tuned down to the ~10 nm level while the scale of the patterned area could exceed 1 cm^(2). Moreover, our technique also leads to the ability to develop an enormous variety of patterns through stepwise amplification of feature types. In particular, some of the features are fabricated for the first time, including target-triangle, hexagram, hexagram-dot and triangle-dot. Distinctive surface plasmon resonance (SPR) properties, such as higher order surface plasmon modes and Fano resonances are both observed from our patterns, which would be highly desired forthe study of plasmonic coupling. In addition, we have demonstrated a surface orientation dependent Raman selectivity on two nano-structures for the first time. Molecular vibrations with opposite symmetries can be selectively enhanced on different substrates. As a demonstration, this property is applied to the odd-even effect of n-alkanethiol self-assembly monolayers (SAMs) on the gold surface. The alternative alternation of the intensity ratios of two vibration pairs have been shown by surface enhanced Raman spectroscopy (SERS) as a function of the number of carbon atoms. The results obtained exhibit high sensitivity and excellent agreement with previous publications.

Using intersectionality as the theoretical framework, this study examined the identity development of African American women attending an academically selective university. Much of the extant literature on African American college women was either not identity focused or did not speak to the experiences of those students situated in these highly competitive academic environments. A qualitative research approach and case study analysis was utilized for this study. This included the use of photographs and photo-elicitation interviewing to actively engage the study’s participants in the process of sharing their identity development and to place their voice and how they make meaning of their complex identities as primary. Examining both their pre-college and in-college experiences, this study looked closely at the impact of family, peer groups, society, internal messages, and the academically selective university setting on the participants’ identity development. While the women in the study enter college viewing identity as largely fixed, the collegiate context played an important role in facilitating their identity evolution. This study outlined the growth process as these participants shifted their understanding of identity from fixed to fluid or from invisible to visible. Implications for this research include the need for colleges and universities to better address the holistic needs of African American female students, especially at their identity intersections. Additional areas for research include reconceptualizing college student identity development to incorporate more holistic, intersectional elements as a means to supporting a student’s development more comprehensively.

Software repositories such as source code repositories and bug repositories record information about the software development process. By analyzing the rich data available in software repositories, we can uncover interesting information. This information can be leveraged to guide software developers, or to automate software development activities. In this thesis we investigate two activities of the development process: selective code integration and grouping of field crash-reports, and use the information available in software repositories to improve each of the two activities. / Thesis (Master, Electrical & Computer Engineering) -- Queen's University, 2012-09-04 12:26:59.388