Spelling suggestions: "subject:"oceancontinent transition"" "subject:"oceanocontinente transition""
1 |
Estudo da margem continental ibérica ocidental com base em dados gravimétricos e magnetométricos regionais / Studies of Western Iberian margin based on regional gravity and magnetic dataLuizemara Soares Alves 29 June 2012 (has links)
Os métodos potenciais são conhecidos como uma ferramenta útil para estudos regionais. Na Ibéria Ocidental, a gravimetria e a magnetometria podem ser
utilizadas para auxiliar no entendimento de algumas questões sobre a estruturação tectônica offshore. Nesta região, tanto as estruturas geradas pela quebra continental, quanto às herdadas do embasamento variscano, tem uma importante contribuição para a resposta geofísica regional observada com estes métodos. Este trabalho tem como objetivo correlacionar as feições geofísicas observadas com alguns modelos geológicos do arcabouço tectônico da Ibéria Ocidental já publicados na literatura. Mapas filtrados foram usados para auxiliar no reconhecimento de diferentes assinaturas geofísicas, os quais foram calculados a partir dos mapas de gravidade Bouguer e do campo magnético total tais como o gradiente horizontal total, derivada tilt, derivada vertical, e integral vertical. O domínio crustal continental foi definido a partir da interpretação dos dados gravimétricos, utilizando gradiente de
gravidade horizontal total da Anomalia Bouguer. Os dados magnéticos, originais e filtrados, foram utilizados para identificar mais três domínios regionais offshore, que sugerem a existência de três tipos de crosta não-siálica. Dois deles são propostos como domínios de transição. A região da crosta de transição mais próxima do continente tem uma fraca resposta regional magnética, e a porção mais distal é um domínio de anomalia de alta amplitude, semelhante à resposta magnética oceânica. O limite crustal oceânico não pôde ser confirmado, mas um terceiro domínio offshore, a oeste da isócrona C34, poderia ser considerado como crosta oceânica, devido ao padrão magnético que apresenta. Alguns lineamentos do embasamento
foram indicados na crosta continental offshore. As feições gravimétricas e magnéticas interpretadas coincidem, em termos de direção e posição, com zonas de sutura variscanas, mapeados em terra. Assim, esses contatos podem corresponder à continuação offshore destas feições paleozoicas, como o contato entre as zonas de Ossa Morena-Zona Centro-Ibérica. Nesta interpretação, sugere-se que a crosta continental offshore pode ser composta por unidades do Sudoeste da Península Ibérica. Isto permite considerar que a Falha de Porto-Tomar pertence a uma faixa de deformação strike-slip, onde parte das bacias mesozoicas da margem continental está localizada. / Potential field methods are known as a very useful tool to regional studies. On Western Iberia, gravimetric and magnetometric data could be helpful to understand
some questions about the offshore tectonic framework. In this area, both continental break-up features and inherited continental basement structures have a strong
contribution to compose the regional geophysical response on gravimetric and magnetometric maps. This work aims to correlate observed geophysical features of
the Iberian margin with some geological models about the tectonic framework of Western Iberia, already published on literature. Filtered maps were used to recognize different geophysical signatures, which were computed from both calculated Bouguer gravity and total magnetic field, such as total horizontal gradient, tilt derivative, vertical derivative, and vertical integration. The continental crustal domain was defined from gravity data interpretation using an enhanced total horizontal gradient of Bouguer Anomaly maps. Magnetic data was used to identify three more regional offshore domains that could indicate three types of non-sialic crust. Two of them are proposed as transitional domains. The landward transitional crust has a very weak regional magnetic response, and the seaward one is a high amplitude anomaly domain, similar to oceanic magnetic response. The oceanic crustal boundary was not confirmed, but a third offshore domain, seaward from C34 isochron, could be considered as oceanic crust by its magnetic pattern. Some basement lineaments were indicated in the offshore continental crust. Gravimetric and magnetic features coincide in terms of their direction and position with Variscan suture zones mapped
onshore. Therefore these contacts could correspond the offshore continuation of these Paleozoic features, such as the Ossa-Morena Zone and Centro-Ibérica Zone suture zone. In this interpretation, offshore continental crust could be formed by units from Southwest Iberia. It allows considering the Porto-Tomar fault as a part of a
swath of strike-slip deformation, where mesozoic basins are located.
|
2 |
Estudo da margem continental ibérica ocidental com base em dados gravimétricos e magnetométricos regionais / Studies of Western Iberian margin based on regional gravity and magnetic dataLuizemara Soares Alves 29 June 2012 (has links)
Os métodos potenciais são conhecidos como uma ferramenta útil para estudos regionais. Na Ibéria Ocidental, a gravimetria e a magnetometria podem ser
utilizadas para auxiliar no entendimento de algumas questões sobre a estruturação tectônica offshore. Nesta região, tanto as estruturas geradas pela quebra continental, quanto às herdadas do embasamento variscano, tem uma importante contribuição para a resposta geofísica regional observada com estes métodos. Este trabalho tem como objetivo correlacionar as feições geofísicas observadas com alguns modelos geológicos do arcabouço tectônico da Ibéria Ocidental já publicados na literatura. Mapas filtrados foram usados para auxiliar no reconhecimento de diferentes assinaturas geofísicas, os quais foram calculados a partir dos mapas de gravidade Bouguer e do campo magnético total tais como o gradiente horizontal total, derivada tilt, derivada vertical, e integral vertical. O domínio crustal continental foi definido a partir da interpretação dos dados gravimétricos, utilizando gradiente de
gravidade horizontal total da Anomalia Bouguer. Os dados magnéticos, originais e filtrados, foram utilizados para identificar mais três domínios regionais offshore, que sugerem a existência de três tipos de crosta não-siálica. Dois deles são propostos como domínios de transição. A região da crosta de transição mais próxima do continente tem uma fraca resposta regional magnética, e a porção mais distal é um domínio de anomalia de alta amplitude, semelhante à resposta magnética oceânica. O limite crustal oceânico não pôde ser confirmado, mas um terceiro domínio offshore, a oeste da isócrona C34, poderia ser considerado como crosta oceânica, devido ao padrão magnético que apresenta. Alguns lineamentos do embasamento
foram indicados na crosta continental offshore. As feições gravimétricas e magnéticas interpretadas coincidem, em termos de direção e posição, com zonas de sutura variscanas, mapeados em terra. Assim, esses contatos podem corresponder à continuação offshore destas feições paleozoicas, como o contato entre as zonas de Ossa Morena-Zona Centro-Ibérica. Nesta interpretação, sugere-se que a crosta continental offshore pode ser composta por unidades do Sudoeste da Península Ibérica. Isto permite considerar que a Falha de Porto-Tomar pertence a uma faixa de deformação strike-slip, onde parte das bacias mesozoicas da margem continental está localizada. / Potential field methods are known as a very useful tool to regional studies. On Western Iberia, gravimetric and magnetometric data could be helpful to understand
some questions about the offshore tectonic framework. In this area, both continental break-up features and inherited continental basement structures have a strong
contribution to compose the regional geophysical response on gravimetric and magnetometric maps. This work aims to correlate observed geophysical features of
the Iberian margin with some geological models about the tectonic framework of Western Iberia, already published on literature. Filtered maps were used to recognize different geophysical signatures, which were computed from both calculated Bouguer gravity and total magnetic field, such as total horizontal gradient, tilt derivative, vertical derivative, and vertical integration. The continental crustal domain was defined from gravity data interpretation using an enhanced total horizontal gradient of Bouguer Anomaly maps. Magnetic data was used to identify three more regional offshore domains that could indicate three types of non-sialic crust. Two of them are proposed as transitional domains. The landward transitional crust has a very weak regional magnetic response, and the seaward one is a high amplitude anomaly domain, similar to oceanic magnetic response. The oceanic crustal boundary was not confirmed, but a third offshore domain, seaward from C34 isochron, could be considered as oceanic crust by its magnetic pattern. Some basement lineaments were indicated in the offshore continental crust. Gravimetric and magnetic features coincide in terms of their direction and position with Variscan suture zones mapped
onshore. Therefore these contacts could correspond the offshore continuation of these Paleozoic features, such as the Ossa-Morena Zone and Centro-Ibérica Zone suture zone. In this interpretation, offshore continental crust could be formed by units from Southwest Iberia. It allows considering the Porto-Tomar fault as a part of a
swath of strike-slip deformation, where mesozoic basins are located.
|
3 |
From rifting to orogen : structure of Alpine Corsica and inheritance of rifting-related architectures in HP terranes / Impact des structures héritées de l'ouverture océanique mésozoique sur l'évolution tectono-métamorphique Alpine des unités de Haute-Pression en Corse pendant la subduction continentaleVitale Brovarone, Alberto 17 March 2011 (has links)
La Corse Alpine offre une section complète du prisme orogénique alpin où la plupart des équivalents des unités décrites dans les Alpes Occidentales peuvent être trouvés sur une section de 40 km. Les minéraux d'haute pression sont exceptionnellement bien préservés, particulièrement la lawsonite, offrant un accès unique à la compréhension de zones de subduction. La Corse alpine est formée par une pile complexe d’unités métamorphiques d'origine continentale et océanique. Ces unités ont été interprétées soit comme des mélanges tectoniques complexes formés pendant la subduction alpine, soit comme les parties plus continues de lithosphère continentale et-ou océanique. Les rares estimations de condition PT sur des larges régions de la chaîne résultent en plusieurs incertitudes dans l'identification des limites séparant les unités qui ont subi des évolutions tectono-métamorphiques différentes et, par conséquent, dans la définition d'une architecture complète de la chaîne. Les données de terrain, structurelles et métamorphiques obtenues dans cette étude aux différentes échelles suggèrent que la chaîne de la Corse alpine est caractérisée par une forte conservation de structures pré-alpin, de la micro-échelle à l'échelle de la chaîne, malgré la déformation intense associée avec le métamorphisme, qui a localement donné les conditions du facies éclogitique et lawsonite. En détail, seulement neuf domaines tectono-métamorphiques homogènes ont été identifiés. Ces terrains peuvent être attribué aux domaines paléogéographiques différents qui ont subi des évolutions tectono-métamorphiques différentes. Malgré ça, les données géochronologiques fournies pendant cette étude indiquent que la Corse alpine résulte d'une évolution complexe, étant caractérisée par la signature claire tant de la tectonique alpine Eocène, à 35 Ma, que de la tectonique apennine, à 25 Ma. Les résultats fournis dans cette thèse contribuent non seulement à la compréhension des processus de subduction et de formation de montagnes, mais donnent aussi des contraintes importantes pour déchiffrer les systèmes Tethys-Alpes et Alpes-Apennine. / Alpine Corsica offers a complete section through the Alpine orogenic wedge where most equivalent of the units described in the Western Alps may be found over a 40 km section. High-pressure mineral assemblages are exceptionally well preserved, especially lawsonite, offering a unique access to the understanding of deeply subducted terranes.Alpine Corsica consists of a complex stack of variably metamorphosed units of continental and Tethys-derived material. These units have been interpreted either as complex tectonic mixing formed during the Alpine subduction, or as more continuous portions of continental and/or oceanic lithosphere. The lack of detailed PT estimates over wide regions of the belt results in several uncertainties in identifying the boundaries separating units that experienced different tectono-metamorphic evolutions and, consequently, in the definition of an exhaustive architecture of the belt.Field, structural and metamorphic data collected in this study at different scales suggest that the Alpine Corsica belt is characterized by a high preservation of pre-Alpine sctructures, from the micro-scale up the scale of the belt, despite the intense deformation essociated with metamorphism, which locally reached lawsonite-eclogite metamorphism. In particular, only nine homogeneous tectono-metamorphic domains have been identified. These terranes can be referred to different paleogeographic domains that experienced different tectono-metamorphic evolutions.Despite that, geochronological data provided during this study indicate that Alpine Corsica results fro a complex polyphase evolution, being characterized by clear signature of both Alpine tectonics, at around 35 Ma, and Apennine tectonics, at around 25 Ma.Results provided in this paper contribute not only to the understanding of processes of subduction and mountain building, but also give important constraints for deciphering the Tethys-Alps and Alps-Apennine systems.
|
4 |
Constraints on melt migration in the Earth's upper mantleGarapic, Gordana 22 January 2016 (has links)
Melting and melt segregation are key processes in the geochemical evolution of the Earth. However, mechanism and time scale of melt transport from the source to the surface are still not well understood and are dependent on the grain-scale distribution of melt. A related question is the retention of melt in partially molten regions of the Earths upper mantle. Seismic observations from mid-ocean ridges (MOR) and subduction zones are interpreted to show in-situ melt contents up to 3%, while geochemical observations from MOR basalts are inferred to indicate very efficient extraction of melt (porosities of order 0.1%).
Earlier theoretical models of the melt distribution were based on the balance of surface tension between melt and uniform crystalline grains, predicting a simple net- work of melt along three-grain edges. Analyses of experimentally produced samples of olivine and basaltic melt show that the melt geometry is much more complex, and includes wetted two-grain boundaries.
I reconstructed the melt geometry of two experimentally produced samples by serial sectioning and 3-D rendering of the pore geometry which demonstrates for the first time that melt exists in thin layers on two-grain boundaries. This confirms the inferences from previous 2-D observations and has significant implications for physical properties of partially molten regions, for example seismic velocities and attenuation. The wetted two-grain boundaries are inferred to be a consequence of continuous grain growth. Due to the complexity of the 3-D melt geometry the perme- ability of partially molten rocks can not be predicted from simple models. I therefore investigated the permeability as a function of porosity for both synthetic and ex- perimentally determined pore geometries using a lattice-Boltzmann method. The calculated permeability is not a simple function of porosity, but increases rapidly at a critical fraction of wetted two-grain boundaries.
In order to extrapolate the experimentally based findings to grain sizes expected in natural rocks I examined the geometry of secondary phases inferred to represent relict melt in mantle peridotites from the Krivaja massif in Bosnia. These findings corroborate the experimental observations of wetted two-grain boundaries.
|
Page generated in 0.1026 seconds