The subject of the master thesis is design of a new detached office building for public administration of Czech Republic Police as a district department in Brno-Černovice. It is presented as a form part of project documentation for a building construction. The building has a cellar and two above-ground floors. It is founded on a strip foundation and pads. The building is roofed by green roof. There are office rooms, sanitary facilities, archives, interrogation rooms, pre-trial detention cells, garages, storage rooms and dog cages in the above-ground part. In the basement, there are technical facilities and shooting range backround. Structural system of the building is wall longitudinal masonry system from clay blocks. The ceiling structure is from cast-in-place reinforced concrete. The part of the building is with ventilated facade a nd rest is insulated with contact thermal insulation.

The subject of this diploma thesis is a project of a new town hall for the district of Brno - sever. Current town hall is situated in the inconvenient building on the Bratislavská street and few decentralised offices are located in separate places. The project should solve current problems as well as to follow current trends in contemporary town hall design. Town halls of these days must cover many functions, not only the accommodation of local government, but also to be the actual centre of the town - the centre of culture, economy and services. The new town hall building is located on corner plot of land in the compound of old Brno Černá Pole barracks. The building provides leasable commercial units as well as office space for the municipal government.

This Master thesis was about calculation and design of supporting steel bar structure multi storey administrative building. Steel structure with rotation symmetric floor plan has sixteen storey. Maximal size of building is 100x100m. Structural design report is made by a combination of manual calculations and calculations using software RFEM by Dlubal. Structural design report includes calculations of secondary beam, primary beam, column, bracing, purin, truss girder and others part of structure with their connections. Thesis includes drawing documentation and report.

This diploma thesis focuses on the construction and technological preparation of the office building in the Lomnického street. The aim of this work is to choose the appropriate construction process. The thesis contains a technical report of a construction and technological project, solutions of wider transport relations, time and financial object plan, itemized budget, design of a site equipment, design of the main building machines and mechanisms, time schedule, technological regulation, inspection and test plan, calculation of two options of the excavation of building pit and details to waterproofing of the substructure. In detail, the thesis is dedicated to secure the building pit enclosed by diaphragm walls.

The content of this thesis is a construction technology project of a new office and production building for company Ray Service a.s. in Staré Město near Uherské Hradiště. The thesis contains technical reports, construction technology study, design of transport ways, technological regulations of demolition and earthworks and regulations for construction of foundation structures. Furthermore is made design of the main machine assembly, inspection and test plan and the design of the construction site, including a technical report. Finally is made a project for the construction of area roads including time plan, LEED certification, noise study and comparison of the main lifting mechanisms.

The Master’s thesis is focused on the analysis and design of selected members of load-bearing structure of an administration building according to the ultimate limit states (ULS) and seviceability limit states (SLS). The calculation and the analysis was supported by design software SCIA ENGINEER 2012. Structural analysis deals with the design of the reinforced concrete (RC) flat slab above the 4rd strorey which is particularly supported by RC columns and particularly lies on RC walls. Furthermore, the Master’s thesis contains analysis of some selected columns of last three storeys, column of lowest storey, construction of stairway between 4rd and 5th storeys. The work beside this deals with the calculation and design of foundation of the object. The rest parts of the load-bearing structure are not solved in the Master’s thesis.

Construction Technology project deals with the new building of the Labour Office in Brno. It is the administrative building of six floors above ground and one basement floor. The building has the shape of a trapezoid. Vertical and horizontal structures are designed of reinforced concrete substructure is designed of waterproof concrete system called white tub. The project includes a technical report on the construction technology of the project, coordinating the construction situation, time and financial plan for the objects, the study of the main technological stages, the project site equipment, design of the main building machines, the schedule of the main building structure, schedule, resourcing, technical regulations for selected activities inspection and test plans for selected activities and comparing two roof building.

The content of the thesis is the implementation of the three-story brick office building with an operation in Hodonin. Text section contains the technical report on the structural and technological project technical report transport relations, study implementation of major technological stages of building SO 01, project construction site, the design of the main building machines and mechanisms, technological regulation, inspection and test plan and a plan of safety and health at work for making the 1st floor ceiling structure. The appendix section includes drawings and installations situation Minor main building structure, calculation of stripping reinforced concrete structures, timing and technology standard of the main building structure and time and financial plan construction-object.

The aim of this thesis is compile building and technological project of new office building of the company ESKO-T in Třebíč. This is a two-storey building, build technology cast-in-place longitudinal reinforced concrete frame with mono-pitched roof. Work is consist of a possible solution of steel, concrete and formwork of rental shop to building. Building and technological project, technological regulation for concreting, draft machine configuration, documentation broker transport relations, the crane card and concrete pump, control od worte quality, time schedule and building budget rough upper construction, environmental protection, occupational safety and health, object work schedule and price comparison concreting with hanging silo for concrete and concrete pump.

This master´s project deals with design of an office building nearly zero energy standard. My master´s project consists of three parts. In the first one I work on technical design of the office building. It is a three-storey building with partial basement. Vertical load-bearing system is partially made from monolithic concrete walls and partially from clay blocks walls. The horizontal load-bearing structures are made of monolithic concrete slab. All roofs are designed as flat roofs. In second part I design all technical equipment in this building. In the last part I compare three types of roof, photovoltaic power plants and evaluate their environmental impact. First type of PV power plant is made by monocrystalline solar cell, second one by polycrystalline solar cell and last one by monocrystalline solar cell with battery system. Environmental impact of these systems is evaluated in Open LCA software. All structures comply with the valid standards and regulations.