Spelling suggestions: "subject:"offshore structures"" "subject:"0ffshore structures""
81 |
A systems approach to documentary maritime fraudKapoor, Peter January 1987 (has links)
Wring the last decade documentary maritime fraud has caused considerable financial loss. The internationality of the crime and the difficulties experienced in the investigation and prosecution of offenders has caused serious concern both nationally and internationally. The aim of this research was to examine the system of international trade in terms of flow between institutions, and to develop a model of the system to identify areas of system failures in terms of actual or potential frauds. A database consisting of 101 fraud cases was compiled. Detailed examination of the cases identified features common to different classes of fraud. Systems approach was used to investigate the system with particular reference to Bills of Lading and method of payment under documentary credits. Conceptual mcdels of the three main contractual sub-systems i. e. carriage, insurance and payment, and of the total system were developed. The latter was used in conjunction with the database to pin-point the weak links both within the system and its imiediate envirormLent. Using a rwlti-disciplinary international Panel of Experts the Delphi technique, appropriately modified, was employed to test the hypothesised weak links, determine feasibility of implementing the recoamndations and seek information to assist in introducing measures to combat fraud. The analysis supports the hypothesised weak links identified in the environment and reccmuendations to strengthen them. Factors creating an environment for fraud are identified, along with reasons for not reporting the crime. Information required to combat fraud is identified. Prior to payment under documentary credits banks should carry out factual checks. The Bill of Lading is not a weak link but the people handling the document are unaware of its importance. Establishmnt of a Conmrcial Crim Research Unit specialising in international trade is recamrended, as is the development of an educational prograrmTo to increase conmercial awareness.
|
82 |
Modular floating factory: experimental offshore building components prefabricationLui, Tin-pak., 雷天柏. January 2004 (has links)
published_or_final_version / Architecture / Master / Master of Architecture
|
83 |
An analytical determination of ultimate strength of tubular joints for offshore structuresCofer, William Franklin 12 1900 (has links)
No description available.
|
84 |
Motion and wave load analyses of large offshore structures and special vessels in wavesWu, Xiong-Jian January 1990 (has links)
Predictions of the environmental loading and induced motional and structural responses are among the most important aspects in the overall design process of offshore structures and ships. In this thesis, attention is focused on the wave loads and excited bodily motion responses of large offshore structures and special vessels. With the aim of improving the existing theoretical methods to provide techniques of theoretical effectiveness, computational efficiency, and engineering practicality in marine and offshore applications, the thesis concentrates upon describing fundamental and essential aspects in the physical phenomenon associated with wave-structure interactions and deriving new methods and techniques to analyse offshore structures and unconventional ships of practical interest. The total wave force arising from such a wave-structural interaction is assumed to be a simple superposition of the potential and the viscous flow force components. The linear potential forces are solved by the Green function integral equation whilst the viscous forces are estimated based on the Morison's damping formula. Forms of the Green function integral equation and the associated Green function are given systematically for various practical cases. The relevant two-dimensional versions are then derived by a transformation procedure. Techniques are developed to solve the integral equation numerically including the interior integral formulation and, in particular, to tackle the mathematical difficulties at irregular frequencies. In applying the integral equations to solve problems with various offshore structures and special vessels, some modified, improved or simplified methods are proposed. At first, simplified method is derived for predictions of the surge, sway and yaw motions of elongated bodies of full sectional geometry or structures with shallow draft. Then, a new shallow draft theory is described for both three- and two-dimensional cases with inclusion of the finite draft effect. Furthermore, a three-dimensional strip method is formulated where the end effects of the body are fully taken into account. Finally, an approximation to the horizontal mean drift forces of multi-column offshore structures are presented. Some new findings are also discussed including the multiple resonances occurring in the motions of multi-hulled marine structures due to the wave-body interaction, the mutual cancellation effect of the diffraction and the radiation forces arising from a full shaped slender body, and so on. Further to those verification studies for individual methods developed, more comprehensive example investigations are given related to two industrial applications. One is a derrick barge semi-submersible with zero forward speed; and the other, a SWATH ship with considerable speed. By correlation of all the proposed approaches with available analytical, numerical and experimental data, the thesis tries to demonstrate a principle that as long as principal physical aspects in the wave-structure interaction problem are properly treated, an appropriately modified or simplified method works, performs well and, sometimes, even better.
|
85 |
Interaction of extreme ocean waves with offshore structuresWalker, Daniel Anthony Guy January 2006 (has links)
With most of the world's untouched oil and gas resources offshore and the possibility that hurricanes are becoming more frequent and more intense, the risks associated with offshore oil and gas production are increasing. Therefore, there is an urgent need to improve current understanding of extreme ocean waves and their interaction with structures. This thesis is concerned with the modelling of extreme ocean waves and their diffraction by offshore structures, with the ultimate aim of proposing improved tools for guiding airgap design. The feasibility of using linear and second order diffraction solutions with a suitable incident wave field to predict extreme green water levels beneath multi-column structures is investigated. Such tools, when fully validated, could replace the need to carry out model tests during preliminary design. When contemplating airgap design it is crucially important that consideration is given to the largest waves in a sea state, the so-called freak or rogue waves. This thesis studies the nature of one specific freak wave for which field data is available, namely the Draupner New Year wave. Unique features of this wave are identified, distinguishing it from a typical large wave, and an estimate of the probability of occurrence of the wave is given. Furthermore, a design wave, called NewWave, is proposed as a good model for large ocean waves and is validated against field and experimental data. The diffraction of regular waves and NewWaves by a number of structural configurations is studied. In order to assess the validity of using diffraction solutions for the purposes of airgap design, comparisons are made with measured wave data from a programme of wave tank experiments. Wave data for a real platform configuration are examined to highlight the key issues complicating the validation of diffraction based design tools for real structures. The ability of diffraction theory to reproduce real wave measurements is discussed. The phenomenon of near-trapping is also investigated, allowing guidelines for airgap design to be established.
|
86 |
The design, manufacture and verification of a high capacity force and moment measurement system /Tucker, John R., January 1998 (has links)
Thesis (M. Eng.), Memorial University of Newfoundland, 1998. / Bibliography: leaves 73-74.
|
87 |
Damage and microstructural change in laboratory grown ice under high pressure zone conditions /Melanson, Paul M., January 1998 (has links)
Thesis (M. Eng.), Memorial University of Newfoundland, 1998. / Bibliography: leaves 125-129.
|
88 |
Multichannel maximum entropy method of spectral analysis applied to offshore structures /Briggs, Michael Jeffrey. January 1981 (has links)
Thesis (Ocean Engineer)--Massachusetts Institute of Technology and the Woods Hole Oceanographic Inssitution, 1981. / Contract no. 14-08-001-17202. Photocopy of typescript. Bibliography: leaves 169-175.
|
89 |
Analysis of floating support structures for marine and wind energyFernandez Rodriguez, Emmanuel January 2015 (has links)
Bed connected support structures such as monopiles are expected to be impractical for water depths greater than 30 m and so there is increasing interest in alternative structure concepts to enable cost-effective deployment of wind and tidal stream turbines. Floating, moored platforms supporting multiple rotors are being considered for this purpose. This thesis investigates the dynamic response of such floating structures, taking into account the coupling between loading due to both turbulent flow and waves and the dynamic response of the system. The performance and loading of a single rotor in steady and quasi-steady flows are quantified with a Blade Element Momentum Theory (BEMT) code. This model is validated for steady flow against published data for two 0.8 m diameter rotors (Bahaj, Batten, et al., 2007; Galloway et al., 2011) and a 0.27 m diameter rotor (Whelan and Stallard, 2011). Time-averaged coefficients of thrust and power measured by experiment in steady turbulent flow were in agreement with BEMT predictions over a range of angular speeds. The standard deviation of force on the rotor is comparable to that on a porous grid for comparable turbulence characteristics. Drag and added mass coefficients are determined for a porous disc forced to oscillate normal to the rotor plane in quiescent flow and in the streamwise axis in turbulent flow. Added mass is negligible for the Keulegan Carpenter number range considered ( less than 1). The drag coefficient in turbulent flow was found to decay exponentially with number, to 2±10% for values greater than 0.5. These coefficients were found to be in good agreement with those for a rotor in the same turbulent flow with disc drag coefficient within 12.5% for less than 0.65. An extreme-value analysis is applied to the measured time-varying thrust due to turbulent flow and turbulent flow with waves to obtain forces with 1%, 0.1% and 0.01% probability of exceedance during operating conditions. The 1% exceedance force in turbulent flow with turbulence intensity of 12% is around 40% greater than the mean thrust. The peak force in turbulent flow with opposing waves was predicted to within 6% by superposition of the extreme force due to turbulence only with a drag force based on the relative wave-induced velocity at hub-height estimated by linear wave theory and with drag coefficient of 2.0. Response of a floating structure in surge and pitch is studied due to both wave- forcing on the platform defined by the linear diffraction code WAMIT and due to loading of the operating turbine defined by a thrust coefficient and drag coefficient. Platform response can either increase or decrease the loading on the rotor and this was dependant on the hydrodynamic characteristics of the support platform. A reduction of the force on the rotor is attained when the phase difference between the wave force on the support and the surface elevation is close to ± and when the damping of the support is increased. For a typical support and for a wave condition with phase difference close to , the 1% rotor forces were reduced by 8% when compared to the force obtained with a rotor supported on a stiff tower.
|
90 |
The effects of boat mooring systems on squid egg beds during squid fishingMaluleke, Vutlhari Absalom January 2017 (has links)
Thesis (MTech (Mechanical Engineering))--Cape Peninsula University of Technology, 2017. / In South Africa, squid fishing vessels need to find and then anchor above benthic squid egg beds to effect viable catches. However, waves acting on the vessel produce a dynamic response on the anchor line. These oscillatory motions produce impact forces of the chain striking the seabed. It is hypothesised that this causes damage to the squid egg bed beneath the vessels. Different mooring systems may cause more or less damage and this is what is investigated in this research. The effect of vessel mooring lines impact on the seabed during squid fishing is investigated using a specialised hydrodynamic tool commercial package ANSYS AQWA models.
This study analysed the single-point versus the two-point mooring system’s impact on the seabed. The ANSYS AQWA models were developed for both mooring systems under the influence of the wave and current loads using the 14 and 22 m vessels anchored with various chain sizes. The effect of various wave conditions was investigated as well as the analysis of three mooring line configurations.
The mooring chain contact pressure on the seabed is investigated beyond what is output from ANSYS AQWA using ABAQUS finite element analysis. The real-world velocity of the mooring chain underwater was obtained using video analysis. The ABAQUS model was built by varying chain sizes at different impact velocities. The impact pressure and force due to this velocity was related to mooring line impact velocity on the seabed in ANSYS AQWA.
Results show the maximum impact pressure of 191 MPa when the 20 mm diameter chain impacts the seabed at the velocity of 8 m/s from video analysis. It was found that the mooring chain impact pressure on the seabed increased with an increase in the velocity of impact and chain size.
The ANSYS AQWA impact pressure on the seabed was found to be 170.86 MPa at the impact velocity of 6.4 m/s. The two-point mooring system was found to double the seabed mooring chain contact length compared to the single-point mooring system. Both mooring systems showed that the 14 m vessel mooring line causes the least seabed footprint compared to the 22 m vessel.
|
Page generated in 0.064 seconds