Master of Science / Department of Entomology / Marcelo Ramalho-Ortigao / Sand flies (Diptera:Psychodidae) are vectors of parasites if the genus Leishmania, the causative agent of leishmaniasis, a neglected tropical disease in several countries around the world. Sand flies transmit Leishmania to suitable vertebrates during the blood meal and following a complex development parasites undergo within the fly. Many aspects of the Leishmania development within the sand fly vector are well known, however details about how sand fly molecules affect the parasite are still not yet known. Our group previously identified that RNAi knockdown of PpChit1, a midgut specific chitinase from the sand fly Phlebotomus papatasi, led to a significant decrease in the load of Le. major. In this study, we assessed potential fitness effects of antisera anti-PpChit1 on three laboratory-reared sand fly species (P. papatasi, Phlebotomus duboscqi, and Lutzomyia longipalpis). Our results suggest that feeding sand flies with anti-PpChit1 sera led to a one day delay in the onset of oviposition, and also suggested that anti-PpChit1-fed flies survived on average up to three days longer that control flies. Analyses of the peritrophic matrix (PM) indicated a significant increase in thickness 72 hours post anti-PpChit1 feeding compared to control sera. Altogether the results suggest that feeding sand flies with anti-PpChit1 likely affects the kinetics of sand PM, which in turn affects the flow of nutrients and certain aspects of sand fly fitness. In the course of this study, we also evaluated the ability of American Foxhounds naturally infected with Leishmania infantum to transmit these parasites via bites of phlebotomine sand flies to suitable vertebrates. Since 1999, an outbreak of canine visceral leishmaniasis (CVL) has been reported in the U.S especially among Foxhounds. The ability of sand flies to pick up and transmit this pathogen represents an important health risk for companion dogs and humans. Our results indicate that Foxhounds naturally infected with Le. infantum are highly infectious to sand flies and that the parasites are able to fully develop within these vectors and de successfully transmitted during blood feeding. Thus, the risk exists for these parasites to become endemic in North America where sand flies are also known to occur.

Master of Science / Department of Entomology / Marcelo Ramalho-Ortigao / Sand flies (Diptera:Psychodidae) are vectors of parasites of the genus Leishmania transmitted to suitable vertebrate host during blood feeding. For blood feeding arthropods, including sand flies, blood meal digestion requires the secretion of inhibitory molecules, such as Kazal-type serine proteinase inhibitors that are involved in preventing the blood from coagulating within the mouthparts and the midgut. Previous studies have identified such molecules in mosquitoes, ticks, and triatomine bugs. Following studies of the midgut transcriptome of Phlebotomus papatasi, the principal vector of Leishmania major, two non-classical Kazal-type serine proteinase inhibitors were identified (PpKzl1 and PpKzl2). We are interested in the role of these proteins as inhibitors of coagulation cascades, in addition to their potential effects on blood digestion in P. papatasi. Ppkzl1 is similar to thrombin and trypsin inhibitors in triatomines and mosquitoes and Ppkzl2 is similar to Kazal-type inhibitors in mosquitoes with unknown function. Analyses of expression profiles indicated that although both transcripts are expressed prior to blood feeding in the midgut of P. papatasi they are tightly regulated by the blood meal. Reverse genetics studies using RNAi-targeted knockdown of PpKzl1 and PpKzl2 by dsRNA injection did not result in a detectable effect on mRNA expression levels. Thus, we expressed a recombinant PpKzl2 in a mammalian expression system (CHO-S free style cells) that was applied to in vitro studies to assess activity against various serine proteinases. Recombinant PpKzl2 inhibited chymotrypsin at nanomolar levels and also inhibited thrombin and trypsin at micromolar levels, suggesting that native PpKzl2 is an active serine proteinase inhibitor and may regulate digestive enzymes and thrombin in the midgut. Leishmania development within the sand fly midgut is faced with several barriers that can severely impact the parasites. For transmission to occur, parasites must be able to overcome these barriers including digestive proteinases, escape from the peritrophic matrix, and midgut attachment. Early stages of Leishmania are susceptible to killing by digestive proteinases in the sand fly midgut. Thus, targeting serine proteinase inhibitors may provide a new strategy to prevent transmission of Leishmania.

This study describes a method for conducting the structural dynamic analysis of a crane fly (family Tipulidae) forewing under different airflow conditions. Wing geometry is captured via micro-computed tomography scanning. A finite element model of the forewing is developed from the reconstructed model of the scan. The finite element model is validated by comparing the natural frequencies of an elliptical membrane with similar dimensions of the crane fly forewing to its analytical solution. Furthermore, a simulation of the fluid-structure interaction of the forewing under different airflows is performed by coupling the finite element model of the wing with a computation fluid dynamics model. From the finite element model, the mode shapes and natural frequencies are investigated; similarly, from the fluid-structure interaction, the time-varying out-of-plane deformation, and the coefficients of drag and lift are determined.

Masters of Science / Eskom supplies to 95% of South Africa’s energy needs and it primarily comes from coal combustion at their coal–fired power stations. Large volumes of fly ash are generated at these coal-fired power stations as a by-product of the coal combustion process. Fly ash is disposed onto landfills at the respective power stations and these landfills are currently running out of storage space. Subsequently, there are concerning environmental impacts upon the natural water environment resulting from coal mining. More specifically, the discharge of acid mine (AMD) water from historical coal mines impact negatively on the water quality in the nearby rivers and dams in the Witbank area. Therefore, as a consequence of the limited space at fly ash landfills, Eskom has embarked on finding alternative ways to re-use fly ash in different applications such as: soil amelioration and land reclamation, road construction as well as brick and cement development. This study focussed on the feasibility of disposing fly ash into the backfill of historical and future coal mines with the intention to firstly reduce fly ash disposal at existing landfills and secondly to improve the decant water quality of the coal mines in the Witbank area. Globally, fly ash has been successfully used in mine backfilling and AMD treatment in countries such as United States of America and India, due to cementitious properties of their fly ash. However, there is limited knowledge on how South African fly ash would behave under backfilled conditions of opencast coal mines where it will be exposed to acidic water environments. This is due to the fact that South African fly ash is considered a Level 3 type hazardous waste, due to its heavy metal concentrations. This waste classification is unique and the strictest compared to global classifications and these methodologies specify that fly ash should be disposed onto lined waste disposal sites due to the potential leaching of heavy metals from these waste sites. It is important to understand the hydrogeological and hydro-geochemical properties of fly ash over time once it is exposed to acid mine water. Field and laboratory tests were conducted to understand these hydrogeological and hydro-geochemical properties of fly ash. Falling head hydraulic tests were conducted at two existing ash landfill sites to determine the hydraulic conductivity (K) of ash of different age. The results exhibit a decreasing trend in K with increasing age. This is due to the pozzolanic nature of fly ash and secondary mineralization of gypsum which causes the fly ash to harden in the presence of water from irrigation for dust suppression together with precipitation over time. Laboratory testing included the use of constant head Darcy column tests to determine the change in K and geochemical properties of the leachate over time. Natural AMD with a pH of 2.5 and a metal composition was used as influent and the leachate were routinely collected and analysed for metal concentrations. The hydraulic conductivity of the fly ash showed a decreasing trend over time. During the placement of coal ash, the moisture allows pozzolanic reactions to solidify the coal ash and lowers the K, towards 10-1 m/d, relative to fresh ash. Secondary mineralization of calcium minerals, in the coal ash contributes to a further decrease in the K, by another order of magnitude from 10-1 m/d towards 10-2 m/d. Sulphate and iron minerals from the AMD also played a major role in the decreasing K as they accumulate in void spaces and having a clogging effect, decreasing the K to 10-3 m/d. The alkaline nature of the coal ash initially neutralizes the acidic levels of AMD from an inflow pH = 2.5 to an outflow pH = 11. Acidification of the outflow towards a pH = 4 was observed, due to large volumes of AMD (>80 000 mL) flowing through short coal ash columns. The K decreased to 3 orders of magnitude, from an initial 10-1 m/d to 10-3 m/d, with the AMD iron (>150 mg/L) and sulphate concentration (>2000 mg/L) playing the dominant role in reducing the hydraulic conductivity. From the geochemical leach test results, it was observed that most of the leachate water was of a better quality than the influent AMD water quality. The outflow pH (pH = 11 to pH = 4) was higher than the pH of the inflow AMD (pH = 2.5). Overall EC reduced in discharge compared to inflow AMD (ECinflow: 535 – 545 mS/m versus ECoutflow: 350 – 490 mS/m), although Na and K in the leachate exhibited higher concentrations (10+2 mg/L) compared to the AMD inflow concentrations (10+1 mg/L). However, most of the other chemical elemental concentrations such as Fe (10-2 – 10+1 mg/L), Si (10-2 – 100 mg/L), Al (10-2 – 10+1 mg/L), Mn (10-2 – 10+1 mg/L), Cr (10-3 – 100 g/L) and SO4 (10+2 – 1+3 mg/L) in the discharge showed lower concentrations when compared to the inflow Fe (10+2 mg/L), Si (100 mg/L), Al (10+1 mg/L), Mn (10+1 mg/L), Cr (10-2 mg/L) and SO4 (10+3 mg/L) concentrations. These results show how fly ash backfill may impact on the current coal mining environment. Overall, the laboratory hydraulic conductivity and geochemical testing showed promising results for fly ash backfilling. Based on this research, fly ash can be used to alter the existing coal mining environment as it is currently known in the Witbank area. The topography, hydraulic conductivity and the water table within the backfill can be altered to improve decant water quality of ash backfilled coal mines.

La nécessité de construire de manière durable, rationnelle et écologique incite à l’innovation et la recherche d’alternatives, telles que la géopolymérisation et l’activation alcaline, qui suscitent un intérêt croissant. Dans ce sens, ces technologies permettent de valorise rdes matières premières à plus faible impact environnemental pour le développement d’une nouvelle famille de matériaux. Cependant, ces mécanismes réactionnels sont complexes et il est encore nécessaire de lever plusieurs verrous avant leur implémentation : la confusion entre les deux processus, l’absence d’approches de formulation rationnelles, la méconnaissance de certaines vulnérabilités, etc. La thèse s’intègre dans cette dynamique et a pour objectif une meilleure connaissance des géopolymères et des matériaux alcali-activés. Le cadre de travail est le développement de coulis d’injection. Un programme expérimental basé sur une sélection de compositions est établi afin de caractériser leurs principales propriétés. Les différences entre les deux processus de structuration sont relevées à travers une étude physico-chimique (DRX, RMN) et liées aux évolutions macroscopiques au jeune âge. Un travail d’optimisation de formulation est mené afin de répondre à des critères d’application et définir les paramètres influençant le comportement rhéologique et mécanique des coulis. Une méthodologie basée sur l’analyse micromécanique et l’homogénéisation multi-échelles a permis d’évaluer le module élastique des matériaux et peut servir de plateforme pour une analyse globale du comportement mécanique. Enfin, une étude de la durabilité est entamée en évaluant la sensibilité au séchage et à la lixiviation en milieu acide. / The need for more durable, rational and ecological constructions encourages innovation and the search for alternatives, such as geopolymerization and alkali-activation, with a growing interest. These technologies allow the use of resources with a lower environmental impact in developing a new class of materials. However, both reaction mechanisms are complex and some issues need further investigation before a proper implementation: the confusion between these processes, the absence of a rational design approach, the lack of knowledge concerning some mechanisms of degradation, etc. The present thesis joins this dynamic and aims at a better understanding of geopolymers and alkali activated materials to design soil injection grouts. An experimental program has been established based on selected mix designs to study their main properties. The differences between both structuration processes were determined through a physicochemical study (XRD, NMR). They were correlated to the macroscopic phenomena observed at early age. An optimization of the mixtures was carried to satisfy the application criteria and define the parameters controlling the rheological and mechanical behavior of the grouts. Using a micromechanical characterization and multiscale homogenization, a methodology has been designed to determine the elastic modulus of the materials.This can be used as a first tool to analyze the global mechanical behavior. Finally, the sensitivity to drying and exposure to acid environments was assessed.

This paper presents the comparison of shrinkage and corrosion characteristics of optimized hybrid Rice Husk Ash (RHA)/Fly Ash (FA)-modified Concrete, with those of normal concrete in the marine environment. Uses of both FA and RHA have numerous environmental benefits. Shrinkage performance was determined by subjecting the mixes to restrained shrinkage testing per ASTM C1581. The time to cracking of the specimens improved an average of 18% with the hybrid mixes. Corrosion testing of reinforced columns was performed in a simulated tidal cycle Marine Environment. Corrosion potential improved by as much as 35% for the mix with the highest FA/RHA replacement, and corrosion activity as measured with potentiostat equipment improved by an average of 34% . These results indicate a clear performance improvement of the modified concrete that is proportional to the percent replacement of cement. / by Diana Arboleda. / Thesis (M.S.C.S.)--Florida Atlantic University, 2010 / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2010. Mode of access: World Wide Web.

As indústrias lançam diversos poluentes no meio ambiente. Dentre os poluentes destacam-se os elementos tóxicos presentes em efluentes líquidos por acarretarem alto risco potencial à saúde humana e ao meio ambiente. Os efluentes podem ser tratados por materiais adsorventes, os quais podem ser provindos de resíduos industriais. Uma forma de contribuir significativamente na sustentabilidade de uma indústria é a transformação de um de seus resíduos em sub-produto de valor agregado para aplicação no tratamento de seus efluentes líquidos como adsorvente de baixo custo. O objetivo deste trabalho foi sintetizar, e caracterizar zeólitas de cinzas de carvão e avaliar sua aplicação como material adsorvente no tratamento de efluente. Os materiais zeolíticos derivados de três tipos diferentes de cinzas de carvão (cinzas manga, cinzas ciclone e cinzas pesadas) geradas na usina termelétrica de Figueira-PR foram usados para tratar o lixiviado do aterro de cinzas de carvão da mesma usina. As seguintes características das zeólitas foram determinadas: composição mineralógica, composição química, teor de carbono total, análise morfológica, área superficial específica, capacidade de troca catiônica (CTC), perda ao fogo, pH, condutividade e densidade aparente. A fase zeolítica formada foi do tipo sodalita com as três amostras usadas como matéria prima após ativação hidrotérmica alcalina. O material zeolítico de cinzas manga apresentou a menor relação SiO2/Al2O3 (1,46), maior CTC (2,36 meq g-1) e área superficial específica (69,5 m2 g-1) e, consequentemente, maior capacidade de remoção dos íons do efluente. As concentrações de As e Cr estavam acima do padrão de lançamento de efluentes. As três amostras de materiais zeolíticos apresentaram uma remoção significativa de Ni, Cd, Zn e Co na dose de 10 g.L-1. Os materiais zeolíticos das cinzas manga e ciclone foram eficientes para reduzir a concentração de As abaixo do limite imposto pela legislação, enquanto a remoção do Cr não foi efetiva com nenhum dos materiais. Na segunda etapa do trabalho, as zeólitas foram modificadas com o surfactante brometo de hexadeciltrimetilamônio (HTDMA-Br) em concentrações de 1,8 e 20 mmol L-1. A modificação das zeólitas não melhorou a eficiência de remoção do As. A remoção do Cr usando a amostra de zeólita de cinzas manga modificada com HDTMA-Br 20 mmol L-1 resultou em uma concentração final muito próxima ao limite permitido pela legislação. / The industries release various types of pollutants into to the environment. Among these pollutants are the liquid effluents containing toxic elements, they carry a high potential risk to human health and the environment. Some effluents can be treated by adsorbent materials, which can be made from industrial waste. One way to contribute significantly to the sustainability of an industry is to transform one of its residues into a value-added by-product and use in the treatment of its own liquid effluents as a low cost adsorbent. The objective of this estudy was to synthesize and characterize coal ash zeolites and evaluate their application as adsorbent material in the treatment of effluent. Zeolite materials derived from three different types of coal ash (fly ashes, cyclone ashes and heavy ashes) generated at the Figueira-PR thermoelectric plant were used to treat leachate from the coal ash landfill of the same plant. The following zeolite characteristics were determined: mineralogical composition, chemical composition, total carbon content, morphological analysis, specific surface area, cation exchange capacity (CTC), fire loss, pH, conductivity and bulk density. The zeolite phase formed with the three samples used as raw material after alkaline hydrothermal activation was sodalite. The zeolite material from fly ash had the lowest SiO2/Al2O3 ratio (1.46), higher CTC (2.36 meq g-1) and specific surface area (69.5 m2 g-1) and, consequently, greater effluent removal capacity. The As and Cr concentrations were above the effluent discharge standard. The three samples of zeolitic materials showed a significant removal of Ni, Cd, Zn and Co in the dose of 10 g L-1. The zeolite materials from fly and cyclone ash were efficient to reduce As concentrations below the limit imposed by legislation, while removal of Cr was not effective with any of the materials. In the second stage of the study, the zeolites were modified with the surfactant hexadecyltrimethylammonium bromide (HTDMA-Br) in concentrations of 1.8 and 20 mmol.L-1. The zeolite removal efficiency of As did not improve after its modification. Removal of Cr using the 20 mmol.L-1 modified HDTMA-Br modified fly ash zeolite sample resulted in a final concentration very close to the limit allowed by the legislation.

A família Tephritidae congrega várias espécies de moscas-das-frutas que utilizam frutos como substrato alimentar no estágio larval, adquirindo o status de inseto-praga quando esses frutos são de valor comercial. O gênero Anastrepha é endêmico do Continente Americano e compreende cerca de 212 espécies descritas, das quais 109 ocorrem no Brasil. A espécie nominal Anastrepha fraterculus representa um complexo de espécies crípticas e se encontra distribuída pela Região Neotropical e sul dos Estados Unidos. No Brasil, através do estudo de diversas características biológicas e do marcador molecular ITS-1 (espaçador ribossômico nuclear), identificou-se a existência de três espécies crípticas no complexo fraterculus, a Anastrepha sp.1 affinis fraterculus, A. sp.2 aff. fraterculus e A. sp.3 aff. fraterculus. Marcadores gênicos presentes no DNA mitocondrial, como o gene cytochrome oxidase I (COI), são ferramentas amplamente utilizadas em análises filogenéticas, pois esta molécula apresenta características distintas do DNA nuclear, como o fato de possuir herança predominantemente materna, apresentar ausência ou baixíssima taxa de recombinação na maioria dos táxons, além de altas taxas mutacionais. Estas características possibilitam a obtenção de dados importantes na interpretação das relações entre as espécies. Amostras do complexo fraterculus (A. sp.1, A. sp.2, A. sp.3) de 14 localidades (média de 5 indivíduos / localidade) no sudeste do Brasil, uma amostra de A sp.4 do Equador e dois grupos externos (A. grandis e A. striata) foram utilizados. Fragmentos de 1139bp do gene COI foram amplificados e sequenciados, 45 haplótipos foram identificados: 30 em A. sp.1, 5 em A. sp.2 e 17 em A. sp.3. A distância média entre as espécies foi de 0,021 e o Fst médio foi 0,347 indicando estruturação populacional muito alta e pequena distância entre os haplótipos, que não apresentaram diferenças fixadas entre as espécies. Os testes de desvio de neutralidade apresentaram valores significativamente negativos. Os testes de seleção evidenciaram a atuação de seleção purificadora com baixos valores de Ka/Ks e significância no Z-teste de seleção. A análise filogenética mostrou fortes evidências de introgressão e não separou as diferentes entidades em clados distintos. Houve a formação de dois ramos principais, um constituído quase que exclusivamente por amostras de A. sp.1, e apenas duas amostras de A. sp.3, e outro que reuniu todas as espécies do complexo. Os dois principais grupos de haplótipos também foram visualizados na rede de haplótipos que mostrou indícios de expansão populacional. Quando somado ao estudo sequências depositadas em bancos de dados por outros autores, a espécie nominal A. fraterculus apresentou em sua distribuição 5 grupos de haplótipos mitocondriais. Dois deles ocorrem no Brasil, um com amostras do México e Costa Rica, um na Guatemala e Venezuela (baixa latitude) e um com indivíduos da Colômbia e Venezuela (alta latitude), sendo que os grupos Brasileiros também reuniram amostras da Argentina e do Equador. Assim, as sequências de COI não permitem a caracterização das entidades do complexo fraterculus apesar de indicar a estruturação populacional e a hipótese mais provável é a de que tenha havido introgressão da molécula mitocondrial entre as espécies do complexo com posterior expansão / The Tephritidae family comprises fruit flies species whose larvae feed and develop in fruits, many of which are commercial varieties and thus the species assume economic significance. Anastrepha genus is distributed throughout the Neotropical region and Southern United States. Analyses of biological characteristics and of the internal transcribed spacer (ITS-1) of the nuclear ribosomal DNA allowed the characterization of three cryptic species of the fraterculus complex in Brazil: Anastrepha sp.1 affinis fraterculus, Anastrepha sp.2 aff. fraterculus and Anastrepha sp.3 aff. fraterculus. Mitochondrial markers as gene cytochrome oxidase I (COI) are largely used in phylogenetic analyses because they have maternal inheritance, none or low recombination and high mutation rates compared to the nuclear DNA. Hence, analyses of the complex based in this marker will offer a divergent perspective from nuclear DNA for inferences on the evolutive relationships between different species. Samples from the fraterculus complex (A. sp.1, A. sp.2, A. sp.3) from 15 localities (average of 5 individuals/ locality) in southeastern Brazil, one sample of A. sp.4 from Ecuador and two outgroups (A. grandis and A. striata) were employed and COI sequences of 1139bp were amplified and analyzed. We identified 45 haplotypes: 30 in A. sp.1, 5 in A.sp.2 and 17 in A. sp.3. The mean distance between the haplotypes was 0.021 and mean Fst 0.347, indicating high population structure and low mitochondrial distance. The neutrality tests had significantly neutral values. The selection tests revealed the action of purifying selection with low values of Ka/Ks and significance in the Z-test selection. Phylogenetic analysis showed strong evidences of introgression and did not separate the various entities in distinct clades grouping the three species in a single branch; there was also the formation of another main branch formed almost exclusively by strains of A. sp.1 and only two samples of A. sp.3. The two main groups of haplotypes were also seen in the haplotype network that showed evidence of population expansion. The analysis of the philogenetic tree based on mitochondrial COI showed strong evidence for introgression. No fixed differences between species were found though mtDNA marker shows a lot of polymorphism. When added sequences deposited in databases by other authors the nominal species A. fraterculus presented in its distribution five groups of mitochondrial haplotypes, two of them in Brazil, one with samples from Mexico and Costa Rica, one in Guatemala and Venezuela and one with individuals from Colombia. The Brazilian groups also collected samples from Argentina and Ecuador. Therefore, the COI sequences do not allow the characterization of the entities of the fraterculus complex, although structure among the species is shown. The most likely hypothesis is that introgression has happened in the mitochondrial molecule among the species with further expansion

No presente estudo obteve-se com sucesso o compósito zeólita:magnetita usando-se como material de partida sulfato ferroso para síntese da magnetita e cinzas leves de carvão para síntese da fase zeolítica. A zeólita foi sintetizada por tratamento hidrotérmico alcalino e as nanopartículas de magnetita foram obtidas pela precipitação de íons Fe2+ em uma solução alcalina. Uma reprodutibilidade foi alcançada na preparação de diferentes amostras do nanocompósito zeolítico. O material foi caracterizado pelas técnicas de espectrometria de Infravermelho, difratometria de raios-X de pó, fluorescência de raios-X, microscopia eletrônica de varredura com a técnica de EDS, massa especifícia e área específica e por outras propriedades físico-químicas. O compósito era constituído pelas fases zeolíticas hidroxisodalita e NaP1, magnetita, quartzo e mulita das cinzas remanescentes do tratamento alcalino e magnetita incorporada na sua estrutura. A capacidade de remoção de U(VI) de soluções aquosas sobre o compósito zeólita:magnetita foi avaliada pela técnica descontínua. Os efeitos do tempo de contato e da concentração inicial do adsorbato sobre a adsorção foram avaliados. Determinou-se o tempo de equilíbrio do sistema e foram avaliados os modelos cinéticos de pseudo-primeira ordem, pseudo-segunda ordem e o modelo de difusão intrapartícula. Um tempo de contato de 120 min foi suficiente para a adsorção do íon uranilo alcançar o equilíbrio. A velocidade de adsorção seguiu o modelo cinético de pseudo-segunda-ordem, sendo que a difusão intrapartícula não era a etapa determinante do processo. Dois modelos de isotermas de adsorção, os modelos de Langmuir e de Freundlich, também foram avaliados. O modelo de Langmuir foi o que melhor se ajustou aos dados experimentais. A partir do modelo cinético e da isoterma que melhor descreveram o comportamento do sistema foi possível calcular os valores teóricos para a capacidade máxima de adsorção do U(VI) sobre o compósito zeólita:magnetita. As capacidades máximas de remoção calculadas foram de 20,7 mg.g-1 pela isoterma de Langmuir e de 23,4 mg.g-1 pelo modelo cinético de pseudo-segunda ordem. O valor experimental obtido foi 23,3 mg.g-1. / Within this work, a magnetic-zeolite composite was successfully synthesized using ferrous sulfate as raw material for the magnetic part of the composite, magnetite, and coal fly ash as raw material for the zeolitic phase. The synthesis of the zeolitic phase was made by alkali hydrothermal treatment and the magnetite nanoparticles were obtained through Fe2+ precipitation on alkali medium. The synthetic process was repeated many times and showed good reproducibility comparing the zeolitic nanocomposite from different batches. The final product was characterized using infrared spectroscopy, powder X-ray difraction, X-ray fluorescence, scanning electron microscopy with coupled EDS. Specific mass, specific surface area and other physicochemical proprieties. The main crystaline phases found in the final product were magnetite, zeolites types NaP1 and hydroxysodalite, quartz and mulite, those last two remaing from the raw materials. Uranium removal capacity of the magnetic zeolite composite was tested using bathc techniques. The effects of contact time and initial concentration of the adsorbate over the adsorption process were evaluated. Equilibrium time was resolved and the following kinectics and difusion models were evaluated: pseudo-first order kinectic model, pseudo-second order kinectic model and intraparticule difusion model. A contact time of 120 min turned out to be enough to reach equilibrium of the adsorption process. The rate of adsorption followed the pseudo-second order model and the intraparticle diffusion didnt turned out to be a speed determinant step. Two adsorption isotherms models, the Langmuir model and the Freundlich model, were also evaluated. The Langmuir model was the best fit for the obtained experimental data. Using the best fitted adsorption isotherm and kinectic model, the theorical maximum adsorption capacity of uranium over the composite was determined for both models. The maximum removal capacity calculated was 20.7 mg.g-1 for the Langmuir isotherm and 23.4 mg.g-1 for the pseudo-second order model. The experimental value attained was 23,3 mg.g-1.

Entender como o cérebro processa informação é um dos problemas mais fascinantes da ciência de nossos dias. Para resolvê-lo, é fundamental estudarmos os mecanismos de representação e transmissão de informação de um único neurônio, a unidade fundamental de processamento do cérebro. Grande parte dos neurônios representa a informação por seqüências de pulsos elétricos, ou potenciais de ação. Nós usamos a mosca como modelo para estudar como a arborização dendrítica do neurônio influencia a quantidade de informação transmitida pela estrutura temporal da seqüência de pulsos. O mapeamento retinotópico da informação no sistema visual da mosca permite que as arborizações dendríticas de certos neurônios sejam estimuladas localmente através da região que corresponde a essa localização no campo visual. Nós apresentamos imagens em movimento em várias regiões do campo visual da mosca e medimos a resposta do neurônio H1, sensível a movimentos horizontais. Usando a teoria da informação, calculamos a quantidade de informação transmitida para cada uma dessas regiões do campo visual e a relacionamos com outras propriedades do neurônio, como por exemplo a sensibilidade espacial e eficiência. Nossos resultados sugerem que a arborização dendrítica influencia a codificação temporal de maneira significativa, indicando que o neurônio pode usar a estrutura temporal da sequência de pulsos para codificar outros parâmetros do estímulo, ou para aumentar a confiabilidade da codificação dependendo da região excitada / Understanding how the brain processes information about the outside world is one of the most fascinating problems of modern science. This involves the analysis of information representation and transmission in the fundamental processing element of the brain - the neuron. In the cortex neurons represent information by sequences of electrical pulses, or spikes. We use the fly as a model to study how the amount of information transmitted by the temporal structure of the spike trains depends on the neuron\'s dendritic arborization. The retinotopic mapping of information in the fly\'s visual system allows the stimulation of specific regions of the neuron\'s dendritic tree through the visual stimulation of the respective region in the visual field of the fly. We show an image moving in the preferred direction of the motion-sensitive neuron H1 in specific regions of the fly\'s visual field and measure the electrical response of the neuron. Using information theory, we calculate the amount of information transmitted for each of these regions and compare it with other properties of the neuron, for example, the spatial sensitivity. Our results suggest that the dendritic arborization influentes the temporal coding in a significant way, indicating that the neuron could use the temporal structure of the spike train to codify other parameters of the stimulus, or to increase the reliability of the code depending on the excited region