Spelling suggestions: "subject:"0ptical communmunication atemsystem"" "subject:"0ptical communmunication systsystem""
1 |
Nonlinear Equalization Based on Decision Feedback Equalizer for Optical Communication SystemXiaoqi, Han 09 December 2013 (has links)
No description available.
|
2 |
ELECTRICAL EQUALIZATION FOR MULTIMODE FIBER SYSTEMSLiu, Yizhou 11 January 2017 (has links)
No description available.
|
3 |
Investigation of High-Nonlinearity Glass Fibers for Potential Applications in Ultrafast Nonlinear Fiber DevicesKim, Jong-Kook 23 August 2005 (has links)
Nonlinear fiber devices have been attracting considerable attention in recent years, due to their inherent ultrafast response time and potential applications in optical communication systems. They usually require long fibers to generate sufficient nonlinear phase shifts, since nonlinearities of conventional silica-core silica-clad fibers are too low. These long devices, however, cause the serious problems of pulse walk-off, pulse broadening, and polarization fluctuation which are major limiting factors for response time, switching bandwidth, and maximum transmittable bit-rate. Therefore, short device length is indispensable for achieving ultrafast switching and higher bit-rate data transmission.
To shorten the required device length, fiber nonlinearities should be increased. In this dissertation, as a way of increasing fiber nonlinearities, high-nonlinearity materials of Litharge, Bismite, Tellurite, and Chalcogenide glasses have been considered. Although they have high nonlinearities, they also have high group-velocity dispersion and high losses deteriorating the performance of nonlinear fiber devices seriously. The aim of this work is to investigate how these high-nonlinearity glasses affect the performance of nonlinear fiber devices, taking into consideration both the advantages and disadvantages. To achieve it, the critical properties of various nonlinear fiber devices constructed with the different types of high-nonlinearity glasses and different types of fibers have been evaluated.
It turned out that the required device lengths of nonlinear fiber devices constructed with the high-nonlinearity glasses were significantly reduced and high group-velocity dispersions and losses could not be major problems due to the extremely short device length. As a result, it would be possible to suppress the problems of pulse walk-off, pulse broadening, and polarization fluctuation in nonlinear fiber devices by introducing high-nonlinearity glasses, thus enabling ultrafast switching and higher bit-rate data transmission.
Furthermore, in this dissertation, a new scheme of wavelength-division demultiplexing based on the optical Kerr effect has been proposed for the first time. The new scheme can turn the disadvantage of the extremely high group-velocity dispersion of high-nonlinearity glasses into an advantage of wavelength-division demultiplexing. Finally, it now would be possible to greatly increase maximum transmittable bit-rate in optical communication systems by simultaneously demultiplexing optical time-division-multiplexed signals and wavelength-division-multiplexed signals with an optical Kerr effect-based demultiplexer. / Ph. D.
|
4 |
Advanced Coded Modulation for High Speed Optical TransmissionLiu, Tao January 2016 (has links)
In the recent years, the exponential Internet traffic growth projections place enormous transmission rate demand on the underlying information infrastructure at every level, from the long haul submarine transmission to optical metro networks. In recent years, optical transmission at 100 Gb/s Ethernet date rate has been standardized by ITU-T and IEEE forums and 400Gb/s and 1Tb/s rates per DWDM channel systems has been under intensive investigation which are expected to be standardized within next couple of years.To facilitate the implementation of 400GbE and 1TbE technologies, the new advanced modulation scheme combined with advanced forward error correction code should be proposed. Instead of using traditional QAM, we prefer to use some other modulation techniques, which are more suitable for current coherent optical transmission systems and can also deal with the channel impairments. In this dissertation, we target at improving the channel capacity by designing the new modulation formats. For the first part of the dissertation, we first describe the optimal signal constellation design algorithm (OSCD), which is designed by placing constellation points onto a two dimensional space. Then, we expand the OSCD onto multidimensional space and design its corresponding mapping rule. At last, we also develop the OSCD algorithm for different channel scenario in order to make the constellation more tolerant to different channel impairments. We propose the LLR-OSCD for linear phase noise dominated channel and NL-OSCD for nonlinear phase noise dominated channel including both self-phase modulation (SPM) and cross-phase modulation (XPM) cases. For the second part of the dissertation, we target at probability shaping of the constellation sets (non-uniform signaling). In the conventional data transmission schemes, the probability of each point in a given constellation is transmitted equally likely and the number of constellation sets is set to 2!. If the points with low energy are transmitted with larger probability then the others with large energy, the non- uniform scheme can achieve higher energy efficiency. Meanwhile, this scheme may be more suitable for optical communication because the transmitted points with large probabilities, which have small energy, suffer less nonlinearity. Both the Monte Carlo simulations and experiment demonstration of both OSCD and non-uniform signaling schemes indicate that our proposed signal constellation significantly outperforms QAM, IPQ, and sphere-packing based signal constellations.
|
5 |
Extraction of semiconductor laser rate equation parameters for simulation of fiber-optical communication system purposeWen, Ye Feng 10 1900 (has links)
<p>This thesis presents the methods to extract modal parameters of semiconductor laser diodes based on a general zero-dimensional rate equation model. Three experiments, namely: the steady-state power versus injection current, small signal intensity modulation response and measurement of small signal response through dispersive optical fiber have been introduced, performed and analyzed under a sample space of 20 Multiple Quantum Well (MQW) Distributed feedback (DFB) laser of the same specification and from the same manufacturer. Testing software has been developed to perform the experiments , collect and analyze the data. The test results display an interesting Gaussian distributions that can be used to enhance further extraction process.</p> <p>An new method to extract the line-width enhancement factor has been purposed, which introduce a new way to extract rate equation parameters for laser lasing at the wave length for zero dispersion in optical fiber (1310nm). The new method circumvent the difficulty for measurement of small signal response through dispersive optical fiber method will not work due to the low fiber dispersion around this wavelength. This method has been validated and published at OSA conference.</p> / Master of Applied Science (MASc)
|
Page generated in 0.1004 seconds