Made available in DSpace on 2014-12-17T15:15:00Z (GMT). No. of bitstreams: 1 CharlieSG.pdf: 1382454 bytes, checksum: 2b54a2a0dcd81f1ca374af1328ff8c73 (MD5) Previous issue date: 2006-03-15 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / n this master s dissertation a Kerr Magneto Optic s magnetometer effect was set up to do characterization of samples type films fine and ultra thin, these samples will be grown after the implementation of the sputtering technique at the magnetism laboratory of of this department. In this work a cooled electromagnet was also built the water and that it reaches close values to 10kOe with a gap of 22 mm including an area of uniform field of 25mm of diameter. The first chapter treats of the construction of this electromagnet from its dimensioning to the operation tests that involve measures of reached maximum field and temperature of the reels when operated during one hour. The second chapter is dedicated to the revision of the magnetism and the magnetization processes as well as it presents a theoretical base regarding the magnetic energies found in films and magnetic multilayer. In the sequence, the third chapter, is especially dedicated the description of the effects magneto opticians the effect kerr in the longitudinal, traverse and polar configurations, using for so much only the classic approach of the electromagnetism and the coefficients of Fresnel. Distinguished the two areas of observation of the effect regarding thickness of the film. The constructive aspects of the experimental apparatus as well as the details of its operation are explained at the room surrender, also presenting the preliminary results of the measures made in one serializes of permalloy films and concluding with the results of the characterization of the first films of iron and permalloy grown here at the theoretical and experimental physics department at UFRN / Nesta disserta??o de mestrado foi montado um magnet?metro de efeito Kerr Magneto-?ptico para fazer caracteriza??o de amostras tipo filme fino e ultrafino, amostras estas que ser?o crescidas ap?s a implementa??o da t?cnica de Sputtering no laborat?rio de magnetismo deste departamento. Neste trabalho tamb?m foi constru?do um eletro?m? arrefecido a ?gua e que atinge valores pr?ximos a 10 kOe com um gap de 22 mm abrangendo uma regi?o de campo uniforme de 25 mm de di?metro. O primeiro cap?tulo trata da constru??o deste eletro?m? desde o seu dimensionamento at? os testes de opera??o que envolvem medidas de campo m?ximo alcan?ado e temperatura das bobinas quando operando durante 1 hora. O capitulo 2 ? dedicado a uma revis?o do magnetismo e dos processos de magnetiza??o bem como apresenta uma base te?rica a respeito das energias magn?ticas encontradas em filmes e multicamadas magn?ticas. Na seq??ncia, o terceiro cap?tulo, ? dedicado a descri??o dos efeitos magneto ?pticos em especial o efeito kerr nas configura??es longitudinal, transversal e polar, utilizando para tanto somente a abordagem cl?ssica do eletromagnetismo e os coeficientes de Fresnel. Distinguindo em seguida, as duas regi?es de observa??o do efeito referentes a espessura do filme. Os aspectos construtivos do aparato experimental bem como os detalhes de sua opera??o s?o explanados no quarto capitulo, apresentando tamb?m os resultados preliminares das medidas efetuadas em uma serie de filmes de Permalloy e finalizando com os resultados da caracteriza??o dos primeiros filmes de ferro e Permalloy crescidos aqui no departamento de f?sica te?rica e experimental da UFRN

Orientador: Munir Salomão Skaf / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Quimica / Made available in DSpace on 2018-08-05T22:46:02Z (GMT). No. of bitstreams: 1 Sonoda_MiltonTaidi_D.pdf: 3606314 bytes, checksum: dd30d5b14e2acb05e75ed7277f70cead (MD5) Previous issue date: 2005 / Doutorado / Físico-Química / Doutor em Ciências

This thesis is divided into three main sections that deal with optical and magnetic thin films properties and their measurements techniques. Principles of the spectroscopic reflectometry and measurements of optical properties are described in the first part. Results of imaging reflectometry are most important. This technique is based on in situ monitoring of optical properties of SiO2 thin films during etching over the area cca 10 × 13 mm2. In next section magnetic properties of thin films and new apparatus built on the Institute of Physical Engineering of BUT are shown. Magnetic properties were observed by longitudinal magneto-optical Kerr effect. The construction of the device is based on a light beam with rectilinear polarization reflected from magnetic material with turned polarization. For investigation of local magnetic properties of microstructures a microscope objective focusing laser beam on the sample is used. The last part of the thesis is aimed on improving of a spin valve structure Co/Cu/NiFe. This work was done within the frame of the Erasmus project in Laboratoire Louis Néel in Grenoble. The goal was to achieve the value of GMR (Giant Magnetoresistance) as high as possible by changing of deposition parameters. This value describes the rate of resistances in different mutual directions of magnetization in trilayers.

Two groups of magnetic oxides were investigated in this thesis. Thin films of La2/3Sr1/3MnO3 (LSMO) deposited by pulsed laser deposition (PLD) on SrTiO3 (STO) substrates were characterized by polar and longitudinal magneto-optical (MO) Kerr spectroscopy. Experimental results were compared to theoretical calculations based on the transfer matrix formalism. A very good agreement between experimental and theoretical data revealed high magnetic ordering down to 5 nm of film thickness as well as a mechanism of suppression of double exchange interaction near the LSMO/STO interface. Magnetically doped Ce1-xCoxO2-δ films deposited by PLD on MgO (x = 0.05 and 0.10) and oxidized Si (x = 0.20) substrates were studied by combination of spectroscopic ellipsometry and MO Faraday and Kerr spectroscopy. Both diagonal and off-diagonal permittivity tensor components were obtained and verified by theoretical calculations confronted with experimental data. Diagonal spectra revealed two optical transitions from oxygen to cerium states. Off-diagonal spectra revealed two paramagnetic transitions involving cobalt ions. An essential influence of cobalt doping on the resulting ferromagnetic properties of CeO2 was observed.

Modification of interfaces in nanostructures can significantly influence their overall properties. Magneto-optical spectroscopy and spectroscopic ellipsometry are ideal for studying these phenomena thanks to their in-depth sensitivity and contactless measurements. Two methods of nonreversible modification of magnetic properties, especially the magnetic anisotropy, are investigated. The measured spectral dependence of magneto-optical Kerr effect is compared to a theoretical calculation in order to determine the profile of the samples for different levels and methods of modification. In addition to this, ellipsometric measurements are performed on a device whose optical properties change by voltage application.

Two important mechanisms in preparation of ultrathin films of magnetic oxides were systematically investigated in this work. First, influence of epitaxial strain on resulting magneto-optical properties of La2/3Sr1/3MnO3 (LSMO) ultrathin films was studied. The investigated films were grown by pulsed laser deposition on four different substrates, providing a broad range of induced epitaxial strains. Magnetic properties were found to deteriorate with increasing value of the epitaxial strain, as expected due to the unit cell distortion increasingly deviating from the bulk and effect of the magnetically inert layer. A combination of spectroscopic ellipsometry and magneto-optical Kerr effect spectroscopy was used to determine spectra of the diagonal and off-diagonal elements of permittivity tensor. The off-diagonal elements confirmed presence of two previously reported electronic transitions in spectra of all films. Moreover, they revealed another electronic transition around 4.3 eV only in spectra of films grown under compressive strain. We proposed classification of this transition as crystal field paramagnetic Mn t2g → eg transition, which was further supported by ab initio calculations. A key role of strain in controlling electronic structure of ultrathin perovskite films was demonstrated. Dynamic application of...

The aim of this master thesis is to prepare and systematically characterize two groups of ultra-thin films of iron garnets with different compositions and deposition conditions. The first set consists of approximately 10 nm thick samples of gallium-doped yttrium-iron garnet on gadolinium gallium garnet (Gd3Ga5O12) (GGG) substrates with different crys- tallographic orientations and different annealing temperatures. The second group con- tains gallium-bismuth-doped neodymium-iron garnet on GGG substrates. These samples have different thicknesses, the concentration of individual elements and different annealing temperatures. All samples were prepared by the metal-organic decomposition method. The analysis of their physical properties was done by magneto-optical Kerr effect (MOKE) and optical experiments. Specifically, MOKE spectroscopy, Faraday hystere- sis loops measurements and spectroscopic ellipsometry. Obtained experimental results were further used to deduce the spectral dependence of complete permittivity tensor. Its spectral dependence was than discussed with relation to the electronic structure of in- vestigated materials which helped to select the best deposition conditions and substrate orientation. 1

Deux mécanismes importants reliant la préparation des couches ultraminces d’oxydes magnétiques à leurs propriétés physiques ont été étudiés dans ce travail. En premier lieu, l’influence de la contrainte épitaxiale sur les propriétés magnéto-optiques de la manganite La₂/₃Sr₁/₃MnO₃ (LSMO) a été étudiée. Les couches ultraminces ont été déposées par ablation laser pulsé sur quatre substrats différents, ce qui a fourni différentes valeurs statiques de la contrainte épitaxiale. Les propriétés magnétiques ont été révélées comme se détériorant avec l’augmentation de la contrainte, ce qui était prévisible à cause de la distorsion grandissante de la maille unitaire ainsi qu’à cause de l’effet de la couche magnétiquement inerte. La combinaison de l’ellipsométrie spectroscopique et de la spectroscopie Kerr magnéto-optique a été utilisée afin de déterminer les spectres des éléments diagonaux et non diagonaux du tenseur de permittivité. L’étude des éléments non-diagonaux a confirmé la présence déjà rapportée de deux transitions électroniques dans les spectres de toutes les couches. De plus, elle a révélé une autre transition électronique autour de l’énergie de 4.3 eV, mais seulement dans les spectres des couches déposées avec une contrainte compressive. Nous avons proposé la classification de cette transition comme une transition paramagnétique du champ cristallin Mn t2g → eg. Cette classification a été confortée par des calculs ab initio. Nous avons ainsi montré le rôle clé de la contrainte dans le contrôle des propriétés magnéto-optiques des couches pérovskites ultraminces. En revanche, l’application dynamique de la contrainte par l’utilisation d’une sous-couche piézoélectrique est restée peu concluante. Le transfert de la contrainte entre la sous-couche piézoélectrique et la couche LSMO nécessite des améliorations ultérieures. En second lieu, l’influence de la désorientation du substrat a été étudiée par rapport à la dynamique de l’aimantation dans l’oxyde SrRuO₃ (SRO). Comme attendu, nous avons trouvé qu’un grand angle de désorientation mène à la suppression de la croissance de plusieurs variants cristallographiques du SRO. Au moyen de la microscopie à force magnétique, nous avons montré que la présence de plusieurs variants de SRO mène à l’augmentation de la densité de défauts agissant comme points d’ancrage ou de nucléation pour les domaines magnétiques. Nous avons donc montré que l’emploi d’un substrat vicinal est important pour la fabrication des couches ultraminces de SRO de haute qualité, avec une faible densité de défauts cristallographiques et d’excellentes propriétés magnétiques. / Two important mechanisms in preparation of ultrathin films of magnetic oxides were systematically investigated in this work. First, influence of epitaxial strain on resulting magneto-optical properties of La₂/₃Sr₁/₃MnO₃ (LSMO) ultrathin films was studied. The investigated films were grown by pulsed laser deposition on four different substrates, providing a broad range of induced epitaxial strains. Magnetic properties were found to deteriorate with increasing value of the epitaxial strain, as expected due to the unit cell distortion increasingly deviating from the bulk and effect of the magnetically inert layer. A combination of spectroscopic ellipsometry and magneto-optical Kerr effect spectroscopy was used to determine spectra of the diagonal and off-diagonal elements of permittivity tensor. The off-diagonal elements confirmed presence of two previously reported electronic transitions in spectra of all films. Moreover, they revealed another electronic transition around 4.3 eV only in spectra of films grown under compressive strain. We proposed classification of this transition as crystal field paramagnetic Mn t2g → eg transition, which was further supported by ab initio calculations. A key role of strain in controlling electronic structure of ultrathin perovskite films was demonstrated. Dynamic application of strain via use of piezoelectric underlayer remained inconclusive, requiring further improvement of the strain transfer from the piezoelectric layer into the LSMO. Second, influence of substrate miscut on magnetization dynamics in SrRuO₃ (SRO) was studied. As expected we found that high miscut angle leads to suppression of multi-variant growth. By means of magnetic force microscopy we showed that presence of multiple SRO variants leads to higher density of defects acting as pinning or nucleation sites for the magnetic domains, which consequently results in deterioration of magnetic properties. We demonstrated that use of vicinal substrate with high miscut angle is important for fabrication of high quality SRO ultrathin films with low density of crystallographic defects and excellent magnetic properties.

No description available.

Para o desenvolvimento da nanociência atual há forte demanda por equipamentos capazes de caracterizar sistemas em escalas da ordem nanométrica. Este contexto impulsionou o desenvolvimento de microscópios ópticos de varredura em campopróximo (Scanning Near-field Optical Microscope SNOM). Diferentemente da microscopia óptica tradicional, os SNOMs detectam a radiação eletromagnética evanescente e, conseqüentemente, a resolução não é limitada pelo critério de Rayleigh. No Laboratório de Materiais Magnéticos IFUSP desenvolvemos um SNOM sensível a efeitos Kerr magnetoópticos (MO-SNOM). Dessa maneira, associamos a alta resolução da técnica à alta sensibilidade dos efeitos magnetoópticos. Trata-se se uma área relativamente pouco explorada e carente de resultados sistemáticos na literatura. Utilizando o MO-SNOM, caracterizamos partículas microestruturadas de Co70.4Fe4.6Si15B10 amorfo com dimensões de 16x16x0.08 microm3 e 4x4x0.08 microm3. Os resultados compreendem dezenas de imagens de susceptibilidade magnetoóptica diferencial com resolução melhor que 200 nm e curvas de histerese local. Em primeira análise, a demonstração de resultados sistemáticos ajuda a estabelecer a técnica. O comportamento magnético das partículas, estudadas sob várias condições de campo aplicado, se mostrou determinado basicamente pela anisotropia de forma. As curvas de histerese local mostraram comportamentos intrinsecamente locais e motivaram uma interessante discussão sobre os parâmetros de caracterização magnética convencionais. As medidas realizadas indicam que o efeito Kerr magnetoótico transversal em campopróximo é similar ao campo-distante. Os resultados são fortemente sustentados por medidas de microscopia magnetoóptica de campo-distante, simulações micromagnéticas e medidas de microscopia de força magnética. Medidas complementares revelam o potencial do MO-SNOM para caracterizações de objetos extensos quanto a potenciais de pinning. Além disso, medidas em filmes finos de NiFe/FeMn acoplados por exchange-bias evidenciam a alta sensibilidade do MO-SNOM, estimada de DM ~ 2 x 10-12 emu. / To support nanosciences evolution, there is a strong demand for developing new instrumentation devoted to nano-scale characterization. In this context, the development of the Scanning Near-field Optical Microscope (SNOM) took place. In contrast to traditional optical microscopes, SNOM deals with evanescent electromagnetic radiation and, consequently, the resolution is no longer limited by the Rayleigh criterion. At Laboratório de Materiais Magnéticos (LMM) IFUSP a SNOM devoted to magneto-optical Kerr effect measurements (MO-SNOM) has been developed. The MOSNOM associates the high resolution of the near-field technique to the high sensibility of the magneto-optical Kerr effect. Near-field magneto-optical microscopy is not yet wellestablished and there is a lack of systematic results in the literature. Using the MO-SNOM, amorphous Co70.4Fe4.6Si15B10 particles with 16x16x0.08 microm3 and 4x4x0.08 microm3 dimensions were studied. With resolution better than 200 nm, several magneto-optical differential susceptibility images and local hysteresis loops were obtained. The systematic results uphold the establishment of this new technique. Under the different applied field conditions, the magnetic behavior of the particles was found to be determined by shape anisotropy. Local hysteresis loops presented shapes intrinsic of local field induced process. The unusual hystesesis loops motivated interesting discussion about the conventional magnetic parameters. The MO-SNOM measurements indicate that the near-field transverse magneto-optical Kerr effect is similar to the far-field case. The results are highly supported by far-field magneto-optical microscopy, micromagnetic simulations and magnetic force microscopy measurements. Complementary measurements indicate the MO-SNOM potential to extensive magnetic surface characterization related to pinning potential distribution. Furthermore, measurements on the exchange-bias coupled NiFe/FeMn thin films make evident the MO-SNOM high sensitivity, estimated to be DeltaM ~ 2 x 10-12 emu.