Las redes de transporte se mueven hacia un modelo de redes formadas por routers IP/MPLS (Internet Protocol/Multiprotocol Laebel Switching) de altas prestaciones interconectadas a través redes troncales inteligentes. Actualmente la tecnología ATM está ampliamente desarrollada en dichas redes troncales que utilizan los protocolos PNNI (Private Network- Network Interface) como plano de control. En cambio la interoperabilidad entre redes IP/MPLS a través de redes PNNI-ATM es todavía un aspecto en proceso de estudio. Por otro lado, la tendencia futura de Internet es ir hacia redes troncales completamente ópticas con capacidad automática de conmutación para permitir un mejor tratamiento del tráfico solicitado. Debido al esfuerzo realizado por los organismos de estandarización sobre redes ópticas, se ha definido un primer modelo de red llamado ASON (Automatic Switched Optical Network). Mientras las redes actuales basadas en SDH (Synchronous Digital Hierarchy) ofrecen sólo capacidad de transporte, la futura ASON permitirá el establecimiento y la liberación de canales ópticos de forma automática. Un aspecto clave para conseguir esta funcionalidad es la definición de un plano de control óptico que será el responsable de realizar las funciones de señalización y encaminamiento.Diferentes estudios han sido realizados para conseguir interoperabilidad entre redes con tecnología IP/MPLS y ATM basados esencialmente en la distribución de información de señalización MPLS a través de una red troncal ATM. Una de las soluciones planteadas se basa en la utilización sobre cada uno de los conmutadores ATM, un dispositivo capaz de procesar información MPLS, llamado LSR (Label Switched Router). Otra, en cambio, propone el establecimiento de un camino MPLS, llamado LSP (Label Switched Path), encapsulado dentro de un camino ATM o VPC (Virtual Path Connection). Ambas soluciones presentan el inconveniente de utilizar un tiempo de establecimiento demasiado elevado.Respecto al plano de control para ASON, decir que una de las opciones propuestas es la de utilizar el GMPLS (Generalizad MPLS) que es una extensión del modelo MPLS con ingeniería de tráfico. Sin embargo, recientemente se ha iniciado un debate en lo foros de estandarización sobre la posibilidad de utilizar el PNNI como plano de control en ASON. Los argumentos que justifican esta opción son que el PNNI, después de unas apropiadas modificaciones, puede ser adecuado para ASON y lleva años funcionando en muchas de las actuales redes de transporte.Esta tesis está basada en el estudio de los dos casos mencionados anteriormente. El primero caso es el de dos redes IP/MPLS conectadas a través de una red troncal ATM la cual utiliza el PNNI como plano de control. En este contexto, el objetivo principal será el de definir un mecanismo rápido de establecimiento de la conexión que proporcione los parámetros requeridos de calidad deservicio entre dos nodos pertenecientes a cada una de las redes IP/MPLS. Para conseguirlo se realizarán las modificaciones pertinentes en el PNNI y se añadirán nuevos elementos de señalización.El segundo caso consiste en interconectar dos redes IP/MPLS a través de una red tronca l´óptica. En primer lugar se adaptará el PNNI para conseguir un protocolo de encaminamiento para ASON con el fin de proporcionar un establecimiento rápido de la conexión en un entorno IP/MPLS-ASON. Finalmente, se definirá un plano de control, llamado O-PNNI (Optical PNNI) basado en la adaptación total del ATM PNNI a redes ASON. Esta tesis finaliza con un análisis de las ventajas y desventajas de los modelos GMPLS y O-PNNI como planos de control en ASON.

L'evolució de les xarxes publiques de transport de dades destaca per el continu augment de la demanda de tràfic a la que estan sotmeses. La causa és la imparable popularització d'Internet i del seu ús per a tot tipus d'aplicacions. Les xarxes de commutació de ràfegues òptiques (OBS: Optical Bursts Switching) són una solució extraordinàriament prometedora per la pròxima generació de xarxes, tant per la flexibilitat que ofereixen com per el seu alt rendiment fruit de l'explotació de la multiplexació estadística en el domini òptic.Aquesta tesi presenta l'anàlisi, modelització i avaluació de les xarxes de commutació de ràfegues òptiques basades en l'emulació del temps de compensació (emulated offset time: E-OBS). El concepte d'E-OBS defineix una arquitectura de xarxa OBS per al transportar i commutar ràfegues òptiques en una xarxa troncal en la que, al contrari de l'arquitectura convencional (C-OBS) en la que el temps de compensació s'introdueix des dels nodes d'accés, el temps de compensació s'introdueix en cadascun dels nodes de la xarxa per mitjà d'un retardador de fibra addicional. L'arquitectura E-OBS permet superar algunes de les desavantatges inherents a arquitectures C-OBS, però la seva gran virtut és la compatibilitat amb les xarxes de commutació de circuits òptics (OCS: Optical Circuit Switching) actuals i les futures xarxes de commutació de paquets òptics (OPS: Optical Packet Switching), de manera que les xarxes OBS basades en una arquitectura E-OBS) poden facilitat enormement la transició de unes a les altres.A ala vista dels principals requeriments de disseny de les xarxes OBS, que són la resolució de contencions en el domini òptic, la provisió de qualitat de servei (QoS) i l'òptim encaminament de les ràfegues per tal de minimitzar la congestió de la xarxa, . en aquesta tesi es proposa un disseny de l'arquitectura E-OBS basada en (i) un mètode viable per a la provisió del temps de compensació, (ii) una qualitat alta global de servei, i (iii) un mecanisme d'encaminament que minimitzi congestió de xarxa.- La primera part d'aquesta tesi proporciona la informació documental necessària per al disseny d'E-OBS.- La segona part se centra en l'estudi de la funcionalitat i viabilitat de l'arquitectura E-OBS. S'introdueixen els principis d'operació d'E-OBS i s'identifiquen els principals esculls que presenten les arquitectures C-OBS i que deixen de ser-ho en una arquitectura E-OBS. Alguns d'aquests esculls són la dificultat d'utilitzar un algorisme d'encaminament amb rutes alternatives, la complexitat dels algoritmes de reserva de recursos i la seva falta d'equitat, la complexitat en la provisió de la QoS, etc. En aquesta segona part es constata que l'arquitectura E-OBS redueix la complexitat dels de reserva de recursos i es verifica la viabilitat d'operació i de funcionament de la provisió del tremps de compensació en aquesta arquitectura a partir de figures de comportament obtingudes amb retardadors de fibra comercialment disponibles.- La tercera part encara el problema de la provisió de la QoS. Primer s'hi revisen els conceptes bàsics de QoS així com els mecanismes de tractament de la QoS per a xarxes OBS fent-ne una comparació qualitativa i de rendiment de tots ells. Com a resultat s'obté que el mecanisme que presenta un millor comportament és el d'avortament de la transmissió de les ràfegues de més baixa prioritat quan aquestes col·lisionen amb una de prioritat més alta (es l'anomenat Burst Preemption mechanism), el qual en alguns casos presenta un problema de senyalització innecessària. Aquesta tercera part es conclou amb la proposta d'un mecanisme de finestra a afegir al esquema de Burst Preemption que només funciona sobre una arquitectura E-OBS i que soluciona aquest problema.- En la quarta part s'afronta el problema de l'encaminament en xarxes OBS. S'estudia el comportament dels algoritmes d'encaminament adaptatius, els aïllats amb rutes alternatives i els multicamí distribuïts, sobre xarxes E-OBS. A la vista dels resultats no massa satisfactoris que s'obtenen, es planteja una solució alternativa que es basa en model d'optimització no lineal. Es formulen i resolen dos models d'optimització per als algoritmes encaminament de font multicamí que redueixen notablement la congestió en les xarxes OBS.Finalment, aquesta tesi conclou que l'arquitectura E-OBS és factible, que és més eficient que la C-OBS, que proveeix eficaçment QoS, i que és capaç d'operar amb diverses estratègies d'encaminament i de reduir eficaçment la congestió de xarxa. / The fact that the Internet is a packet-based connection-less network is the main driver to develop a data-centric transport network. In this context, the optical burst switching (OBS) technology is considered as a promising solution for reducing the gap between transmission and switching speeds in future networks.This thesis presents the analysis, modelling, and evaluation of the OBS network with Emulated offset-time provisioning (E-OBS). E-OBS defines an OBS network architecture to transport and switch optical data bursts in a core network. On the contrary to a conventional offset-time provisioning OBS (C-OBS) architecture, where a transmission offset time is introduced in the edge node, in an E-OBS network the offset time is provided in the core node by means of an additional fibre delay element. The architecture is motivated by several drawbacks inherent to C-OBS architectures. It should be pointed out that the E-OBS has not been studied intensively in the literature and this concept has been considered rather occasionally.Due to the limitations in optical processing and queuing, OBS networks need a special treatment so that they could solve problems typical of data-centric networks. Contention resolution in optical domain together with quality of service (QoS) provisioning for quality demanding services are, among other things, the main designing issues when developing OBS networks. Another important aspect is routing problem, which concerns effective balancing of traffic load so that to reduce burst congestion at overloaded links. Accounting for these requirements, the design objectives for the E-OBS architecture are (i) feasibility of offset-time provisioning, (ii) an overall high quality of service, and (iii) reduction of network congestion. These objectives are achieved by combining selected concepts and strategies, together with appropriate system design as well as network traffic engineering.The contributions in this thesis can be summarized as follows.- At the beginning, we introduce the principles of E-OBS operation and we demonstrate that C-OBS possesses many drawbacks that can be easily avoided in E-OBS. Some of the discussed issues are the problem of unfairness in resources reservation, difficulty with alternative routing, complexity of resources reservation algorithms, efficiency of burst scheduling, and complexity in QoS provisioning. The feasibility of E-OBS operation is investigated as well; in this context, the impact of congestion in control plane on OBS operation is studied. As a result, we confirm the feasibility of E-OBS operation with commercially available fibre delay elements.- Then, we provide both qualitative and quantitative comparison of the selected, most addressed in the literature, QoS mechanisms. As an outcome a burst preemption mechanism, which is characterized by the highest overall performance, is qualified for operating in E-OBS. Since the preemptive mechanism may produce the overbooking of resources in an OBS network we address this issue as well. We propose the preemption window mechanism to solve the problem. An analytical model of the mechanism legitimates correctness of our solution.- Finally, we concern with a routing problem - our routing objective is to help the contention resolution algorithms in the reduction of burst losses. We propose and evaluate two isolated alternative routing algorithms designed for labelled E-OBS networks. Then we study multi-path source routing and we use network optimization theory to improve it. The presented formulae for partial derivatives, to be used in a non-linear optimization problem, are straightforward and very fast to compute. It makes the proposed non-linear optimization method a viable alternative for linear programming formulations based on piecewise linear approximations.Concluding, E-OBS is shown to be a feasible OBS network architecture of profitable functionality, to support efficiently the QoS provisioning, and to be able to operate with different routing strategies and effectively reduce the network congestion.

El estudio e investigación en el campo de las redes ópticas de acceso han sido fomentadas en años recientes debido a la continua migración de Servicios multimedia que son ofrecidos a través de Internet. Aunque los dispositivos utilizados para implementar Fiber-to-the-Home (fibra a casa), que reemplazan las soluciones tradicionales basadas en cable de cobre, están basadas aún en micro-óptica, se puede prever una evolución hacia integración fotónica. Todavía queda la pregunta acerca de los diseños necesarios para este paso importante de integración, que debe ser optimizado en términos del desempeño de transmisión, eficiencia energética y costo con el fin de lograr todos los requerimientos de las redes fotónicas de siguiente generación. Como elemento más crítico en las redes de acceso ópticas es el equipo en los clientes, este trabajo se centra en éste. Los temes cubiertos abarcan una gama amplia e incluyen: el reciclado de longitudes de onda para transmisión de datos en full-dúplex a través de una sola frecuencia óptica; la generación de formatos de modulación avanzados con moduladores semiconductores de bajo costo y factor pequeño de integración; soporte de amplificación óptica a través de técnicas de sembrado y el soporte de funcionalidades de capes superiores en la capa física. Después de la prueba principal de las técnicas propuestas, se resaltan los beneficios, impedimentos y caminos de reemplazo hacia sistemas fotónicos multifuncionales a través de casos de estudio. Por su parte, los diseños más representativos se profundizan más sobre todo por su posibilidad de ser integrados fotónicamente. / Optical access technology has experienced a boost in the last years, thanks to the continuously migrating multimedia services that are offered over the internet. Though the devices used for deploying Fiber-to-the-Home instead of traditional copper-based solutions are still based on micro-optics, an evolution towards photonic integration can be foreseen. What remains is the question about the exact designs for this important step of integration, which should be optimized in terms of transmission performance, energy efficiency and cost to address all requirements of next-generation photonic networks. As the most critical element in optical access, the customer premises equipment is in primary focus of this discussion. The covered topics span over a wide range and include wavelength recycling for full-duplex data transmission on a single optical frequency, the generation of advanced modulation formats with low-cost semiconductor modulators with small form factor, support for optical amplification by means of seeding techniques and the support of higher layer functionality at the physical layer. Next to the principal proof of the proposed techniques, the benefits, impediments and upgrade paths towards multifunctional photonic systems are highlighted in different case studies, while the most representative designs are further discussed in their capability of being photonically integrated.

In recent years, the ever-increasing environmental friendliness concern has made energy efficiency in telecom networks as an important theme in their operations. Meanwhile, mission-critical (MC) services and systems (such as healthcare, police, and firefighting) have been acquiring special attention from telecom designers and operators. The currently deployed MC network technologies are indigent in terms of bandwidth capacity, and thus they are not able to support the emerging MC multimedia applications. Therefore in this thesis, we first explore the possibility of provisioning the MC services over the integration of fiber-wireless (FiWi) technologies, which has been considered as a promising candidate for the deployment of high-speed and mobile broadband access networks. We then investigate the energy efficiency problem in the FiWi integration, which consists of WiMAX in the wireless plane, and of Ethernet Passive Optical Network (EPON) - the most popular variant of the next-generation PON (NG-PON) technology, in the optical plane. In WiMAX, the energy saving protocol has been extensively investigated and standardized. Conversely, it has been recently studied in NG-PON, which currently consumes the least power among all the high-speed access networks. However, NG-PON has notably matured in the past few years and is envisioned to massively evolve in the near future. This trend will increase the power requirements of NG-PON and make it no longer coveted. Therefore we address the energy efficiency problem in NG-PON. For each of our contributions, we conduct extensive simulations to demonstrate the effectiveness and advantages of the proposed solutions.

Dense wavelength division multiplexing (DWDM) is becoming the technology of choice for meeting the increasing bandwidth demands in optical networks. DWDM has been used to increase the capacity of long-haul optical transport systems. Efforts are being made to move DWDM into the broadband access network serving residential and business subscribers. First, a new centralized DWDM PON scheme is demonstrated for bi-directional upstream and downstream transmissions. The proposed DWDM PON scheme is implemented using optical carrier suppression and separation (OCSS) technology to generate a wavelength pair from a single laser source at the central office. This method enables the co-location of both upstream and downstream DWDM transmitters in the central office. In addition, the complexity, cost, and maintenance of the optical network unit are reduced by enabling wavelength independent operation. Second, a new multistage architecture is proposed for the delivery of information to groups of subscribers located at different distances from the central office. A 25 GHz DWDM comb is generated using OCSS technology, and error-free transmission of four 10 Gbps channels is demonstrated. Finally, a new wide area access network with bi-directional DWDM amplification using semiconductor optical amplifiers (SOAs) is demonstrated. The detrimental effect of SOA crosstalk resulting from cross gain modulation can be suppressed using a constant intensity modulation format such as differential phase shift keying (DPSK). The feasibiity of bi-directional DPSK transmission of 16 interleaved DWDM channels using an in-line SOA has been studied experimentally. In addition, the reduction of bi-directional SOA reflections has been realized by optimizing the SOA bias current and facet reflectivities.

Performance of neural network based restoration of optical networks is evaluated and a few possible improvements are proposed. Neural network based restoration is simulated with optical link capacities assigned by a new method. Two new improvement methods are developed to reduce the neural network size and the restoration time of severed optical connections. Cycle based restoration is suggested, which reduces the neural network structure by restoring the severed connections for each optical node, iteratively. Additionally, to reduce the restoration time, the necessary waiting time before the neuron outputs fire for the propagation delay over the network is computed and embedded in the control structure of the neural network. The improvement methods are evaluated by simulations in terms of restorability, restoration time, network redundancy and average length of restoration paths for different failure cases and different security requirements.

The current prospects in wired and wireless access networks, it is becoming increasingly important to address potential convergence in order to offer integrated broadband services. These systems will need to offer higher data transmission capacities and long battery life, which is the catalyst for an everincreasing variety of air interface technologies targeting local area to wide area connectivity. Current integrated industrial networks do not offer application aware context delivery and enhanced services for optimised networks. Application aware services provide value-added functionality to business applications by capturing, integrating, and consolidating intelligence about users and their endpoint devices from various points in the network. This thesis mainly intends to resolve the issues related to ubiquitous application aware service, fair allocation of radio access, reduced energy consumption and improved capacity. A technique that measures and evaluates the data rate demand to reduce application response time and queuing delay for multi radio interfaces is proposed. The technique overcomes the challenges of network integration, requiring no user intervention, saving battery life and selecting the radio access connection for the application requested by the end user. This study is split in two parts. The first contribution identifies some constraints of the services towards the application layer in terms of e.g. data rate and signal strength. The objectives are achieved by application controlled handover (ACH) mechanism in order to maintain acceptable data rate for real-time application services. It also looks into the impact of the radio link on the application and identifies elements and parameters like wireless link quality and handover that will influence the application type. It also identifies some enhanced traditional mechanisms such as distance controlled multihop and mesh topology required in order to support energy efficient multimedia applications. The second contribution unfolds an intelligent application priority assignment mechanism (IAPAM) for medical applications using wireless sensor networks. IAPAM proposes and evaluates a technique based on prioritising multiple virtual queues for the critical nature of medical data to improve instant transmission. Various mobility patterns (directed, controlled and random waypoint) has been investigated and compared by simulating IAPAM enabled mobile BWSN. The following topics have been studied, modelled, simulated and discussed in this thesis: 1. Application Controlled Handover (ACH) for multi radios over fibre 2. Power Controlled Scheme for mesh multi radios over fibre using ACH 3. IAPAM for Biomedical Wireless Sensor Networks (BWSN) and impact of mobility over IAPAM enabled BWSN. Extensive simulation studies are performed to analyze and to evaluate the proposed techniques. Simulation results demonstrate significant improvements in multi radios over fibre performance in terms of application response delay and power consumption by upto 75% and 15 % respectively, reduction in traffic loss by upto 53% and reduction in delay for real time application by more than 25% in some cases.

Στην εργασία αυτή ασχολούμαστε με το πρόβλημα της δρομολόγησης ενός συνόλου αιτήσεων επικοινωνίας σε WDM (Wavelength Division Multiplexing) πλήρως οπτικά δίκτυα από την άποψη της θεωρίας παιγνίων. Αν θεωρήσουμε κάθε αίτηση δρομολόγησης (ζεύγος κόμβων αφετηρία-προορισμός) ως παίκτη, τότε μία στρατηγική περιλαμβάνει ένα μονοπάτι από τον κόμβο-αφετηρία στον κόμβο-προορισμό και μία συχνότητα (χρώμα). Λαμβάνοντας υπόψη τον περιορισμό ότι δύο παίκτες δεν μπορούν να χρησιμοποιήσουν την ίδια συχνότητα στην ίδια ακμή, θεωρούμε ότι το κόστος δύο αλληλοσυγκρουόμενων στρατηγικών είναι απαγορευτικά μεγάλο. Στο παραπάνω πλαίσιο, μελετάμε διάφορες φυσικές συναρτήσεις κόστους επικεντρώνοντας στην ύπαρξη αμιγών σημείων ισορροπίας Nash και στην υπολογιστική πολυπλοκότητα αναγνώρισης και υπολογισμού τους. / We consider the problem of routing a number of communication requests in WDM (wavelength division multiplexing) all-optical networks from the standpoint of game theory. If we view each routing request (pair of source-target nodes) as a player, then a strategy consists of a path from the source to the target and a frequency (color). To reflect the restriction that two requests must not use the same frequency on the same edge, conflicting strategies are assigned a prohibitively high cost. Under this formulation, we consider several natural cost functions focusing on the existence of Nash equilibria and on the complexity of recognizing and computing them.

In recent years, the ever-increasing environmental friendliness concern has made energy efficiency in telecom networks as an important theme in their operations. Meanwhile, mission-critical (MC) services and systems (such as healthcare, police, and firefighting) have been acquiring special attention from telecom designers and operators. The currently deployed MC network technologies are indigent in terms of bandwidth capacity, and thus they are not able to support the emerging MC multimedia applications. Therefore in this thesis, we first explore the possibility of provisioning the MC services over the integration of fiber-wireless (FiWi) technologies, which has been considered as a promising candidate for the deployment of high-speed and mobile broadband access networks. We then investigate the energy efficiency problem in the FiWi integration, which consists of WiMAX in the wireless plane, and of Ethernet Passive Optical Network (EPON) - the most popular variant of the next-generation PON (NG-PON) technology, in the optical plane. In WiMAX, the energy saving protocol has been extensively investigated and standardized. Conversely, it has been recently studied in NG-PON, which currently consumes the least power among all the high-speed access networks. However, NG-PON has notably matured in the past few years and is envisioned to massively evolve in the near future. This trend will increase the power requirements of NG-PON and make it no longer coveted. Therefore we address the energy efficiency problem in NG-PON. For each of our contributions, we conduct extensive simulations to demonstrate the effectiveness and advantages of the proposed solutions.

This thesis evaluates the performance of service differentiation with different class of services namely protection, reservation and the best effort services on the NxN meshed torus and the ring topology, which are established as survivable all&amp / #8208 / optical WDM networks. Blocking probabilities are measured as performance criteria and the effects of different number of wavelengths, different type of services and different topology size with wavelength selective lightpath allocation schemes are investigated by simulations with respect to increasing load on the topologies.